Loading...
15060016I CITY OF CUPERTINO BUILDING PERMIT I IBUILDING ADDRESS: 10720 MINETTE DR I CONTR CT ALI'S CONSTRUCTION & I PERMIT NO: 15060016 OWNER'S NAME: RAVILISETTY PAVAN K ET AL OWNER'S PHONE: 4089823467 ❑ LICENSED CONTRACTOR'S DECLARATION License Class Lic.# CIO 4 Contractor AI4iYU tkate W-4-5 I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. I hereby affirm under penalty of perjury one of the following two declarations: I have and will maintain a certificate of consent to self - insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. D- Signature /ate I hereby affirm that Mim exempt from the Contractor's License Law for one of the following two reasons: I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec.7044, Business & Professions Code) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.7044, Business & Professions Code). I hereby affirm under penalty of perjury one of the following three declarations: I have and will maintain a Certificate of Consent to self - insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Worker's Compensation laws of California. If, after making this certificate of exemption, I become subject to the Worker's Compensation provisions of the Labor Code, I must forthwith comply with such provisions or this permit shall be deemed revoked. APPLICANT CERTIFICATION 1 certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. Signature Date 1011 S DE ANZA BLVD I DATE ISSUED: 08/12/2015 SAN JOSE, CA 95129 1 PHONE NO: (408) 898 -6474 JOB DESCRIPTION: RESIDENTIAL ❑ COMMERCIAL ❑ ADD 498 S.F. TO FRONT OF SFD TO CREATE (N) LIVING RM, MASTER BEDROOMIBATH & LAUNDRY RM (NO OTHER REMODEL AREA IN (E) SFD) Sq. Ft Floor Area: I Valuation: $110000 0 APN Number: 37531041.00 1 Occupancy Type: PERMIT EXPIRES IF WORK IS NOT STARTED WITHIN 180 DAYS OF PERMIT ISSUANCE OR 180 DAYS FROM LAST CALLED INSPECTION. Issued by:���i�/��/ G�G� Date: -/- -/ RE- ROOFS: All roofs shall be inspected prior to any roofing material being installed. If a roof is installed without first obtaining an inspection, I agree to remove all new materials for inspection. Signature of Date: ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER HAZARDOUS MATERIALS DISCLOSURE I have read the hazardous materials requirements under Chapter 6.95 of the California Health & Safety Code, Sections 25505, 25533, and 25534. I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Section 25532(a) should I store or handle hazardous material. Additionally, should I use equipment or devices which emit hazardous air contaminants as defined by the Bay Area Air Quality Management District I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Sections�505, 25533, and 25534.25533, and 25534. Owner or authorized agent: Date: ( Z CONSTRUC N LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of work's for which this permit is issued (Sec. 3097, Civ C.) Lender's Name Lender's Address ARCHITECT'S DECLARATION I understand my plans shall be used as public records. Licensed Professional mr f� �S %IDfd` CONSTRUCTION PERMIT APPLICATION COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION 10300 TORRE AVENUE • CUPERTINO, CA 95014 -3255 CUPERTINO (408) 777 -3228 • FAX (408) 777 -3333 • building o1igugertino.ong q93 s 5W&o o/6' ❑ NEW CONSTRUCTION ADDITION ❑ ALTERATION / TI " REVISION / DEFERRED ORIGINAL PERMIT # J PROJECT ADDRESS /0 7 P 1 i �c / ^��� '] j 1a APN # 3 i OWNER NAME Q y QY l PHONE } � U ? - J� / Er (�C1 DCY"r"G 'a1 -2 ,P' `0S bC"-5- STREET ADDRESS CITY, STATE, ZIP FAX CONTACT NAME �' +- I, PHO E -MAIL / ' 1 0A S'A -Uc7� 0,0L� STREET ADDRESS ioll 417-a 661d CITY, STATE, ZIP FAX O ❑ OWNER ❑ OWNER - BUILDER ❑ OWNERAGENT 0 CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT CONTRACTOR NAME LICENSE NUMBER LICENSE TYPE BUS. LIC # 141/ O� K" COMPANY NAME Allis n E -MAIL ul�s_Consf►�rtGTOna) ghao. FAX STREET ADDRESS /o// S An za /31 vo( CITY, STATE, ZIP + �S J PHONE ` / :4RCHITECT/ENGINEERNAME LICENSENUIvIBER BUS. LIC�# COMPANY NAME E -MAIL FAX STREET ADDRESS CITY, STATE, ZIP PHONE DESCRIPTION OF WORK LJ J / {� S rcvl Add =STING USE PROPOSED USE CONSTR TYPE 4 STORIES USE TYPE OCC. SQ.FT. VALUATION (S) E )GSTG - NEW FLOOR, DEMO TOTAL AREA AREA AREA NET AREA - BATHROOM KITCHEN_ OTHER REMODEL AREA REMODEL AREA REMODEL AREA PORCH AREA DECK AREA TOTAL DECK/PORCH AREA GARAGE AREA: DETACH ❑ ATTACH # DWELLING UNITS: IS A SECOND UNIT ❑ YES SECOND STORY ❑YES - BEINGADDED? ❑NO ADDITION? ❑NO PRE - APPLICATION ❑YES IF YES, PROVIDE COPY OF PLANNING APPL < ❑ NO PLANTN -ING APPROVAL LETTER IS THE BLDG AN ❑ EICHLER HOME? ❑ NO RECEIVE - - _ -. TOT V ATION: ®V o By my signature below, I certify to each of the following: I am the property owner or o act on r owner's behalf. have ad this application and the information I have provided is correct. I have read the Description of Work verify i rate. I agree to comply with all applicable local ordinances and state laws relating to b ilding construction. I aut orize representatives of Cupertino t r the abovee-- identified property for inspection purposes. Signature of Applicant/Agent: _ Date: SUPPLEMENTAL 1NFORD4ATION REQUIRED �LrcHECieT��E ='r. _ xoIIT>resl iP New SFD or Multifamily dwellings: Apply for demolition permit for I] O VEi TH)<COI7RTER s� ' ❑ BUII DING PLAIQ REVIEW existing building(s). Demolition permit is required prior to issuance of bulldmgs� permit for new building. 2� '. -w„�,& ExP�IESS 3+.'i+ mss. - �❑PI AxI�L�GPLAIREV7Ew Commercial Bldgs: Provide a completed Hazardous Materials Disclosure © sTANDARD�£ Ran- ❑ PusLTCwoRxs t _ form if any Hazardous Materials are being used as part of this project.F -pTt ��❑ LARGE ^ - 's ',�,��� ,�.���n L❑�.,F�EA � �� �w��} � �. _ Copy of Planning Approval Letter or Meeting with Planning prior to ©'�MA70R s '*$Al\TI`ARy SER'ER`DISTRICT ` a }: submittal of Building Permit application. BldgApp_2011.doc revised 06/21/11 tir'11 5h- 74 ,�r�,����� CITY OF CUPERTINO 1�11s1 FFF F.cTIMATOR — RITII,DING DIVISION OCCUPANCY TYPE: ADDRESS: 10720 MINETTE DR DATE: 06/02/2015 REVIEWED BY: MELISSA lia APN: 375 31 041 BP #: o V� VALUATION: $110,000 FPERMIT TYPE: Building Permit PLAN CHECK TYPE: Addition PRIMARY SFD or Duplex USE: 2nd Unit? Yes No OTC. 0 Yes 0 No PENTAMATION 1 R3SFDADD PERMIT TYPE: WORK ADD 498 S.F. TO FRONT OF SFD TO CREATE N LIVING RM MASTER BEDROOM /BATH & SCOPE LAUNDRY RM (NO OTHER REMODEL AREA IN (E) SFD) OCCUPANCY TYPE: TYPE OF CONSTR. FLR AREA s.f. PC FEES PC FEE ID BP FEES BP FEE ID R -3 (Custom) II- 13,III- 13,IV,V -B 498 $1,626.00 IADDPLCK $1,323.00 IADDINSP I $1,323.00 Suppl. Insp. Fee-.0 Reg. 0 OT 0.0 hrs $0.00 PME Unit Fee: $0.00 PME Permit Fee: $0.00 � �(171.11!'UC't10t1 �cl. \: :'IChnilli.stratitV FCC: 0 E) Work Without Permit? © Yes 0 No $0.00 TOTALS: 4 98 $1,626.00 Trcn'el Documentation Fees: $1,323.00 Strong, Motion Fee: IBSEISMICR MECH, HOURLY © Yes (j) No PLUMB, HOURLY ()Yes E) No ELEC, HOURLY © Yes Q No MISC ITEMS lruuh. flan Check iee. Plan Chr, . Select a Misc Bldg/Structure or Element of a Building Plitrrlb. I' Flec Permir t`ee- — hrs ?rirc'r 1'aum,l; it s; xtr Lle(_ Insp Lj L $0.00 P11111111. Insp. V1, I $1,323.00 Suppl. Insp. Fee-.0 Reg. 0 OT 0.0 NOTE: This estimate does not include fees due to other Departments (i.e. rtanntng, runuc rrurns, /'uc, . "'.­'y �•�•' ° °• I' ' tion available and are onl an estimate Contact the Dept or addn'l info. District, etc . These Lees are based on the re tmtna FEE ITEMS (Fee Resolution 11 -053 Eff 7 %1 %'13) to orma FEE QTY /FEE MISC ITEMS Plan Check Fee: $1,626.00 Select a Misc Bldg/Structure or Element of a Building Suppl. PC Fee: 0 Reg. 0 OT 0.0 hrs $0.00 PME Plan Check: $0.00 Permit Fee: $1,323.00 Suppl. Insp. Fee-.0 Reg. 0 OT 0.0 hrs $0.00 PME Unit Fee: $0.00 PME Permit Fee: $0.00 � �(171.11!'UC't10t1 �cl. \: :'IChnilli.stratitV FCC: 0 E) Work Without Permit? © Yes 0 No $0.00 Advanced Planning Fee: IPLLONGR $69.72 Select a Non - Residential 0 Building or Structure 0 Trcn'el Documentation Fees: Strong, Motion Fee: IBSEISMICR $14.30 Select an Administrative Item BIda Stds Commission Fee: IBCBSC $5.00 SUBTOTALS: $3,038.02 $0.00 TOTAL FEE: $3,038.02 Revised: uoru n2_u, 5 1� I CITY OF CUPERTINO BUILDING PERMIT I IBUILDING ADDRESS: 10720 MINETTE DR I CONTR ACTOR: ALPS CONSTRUCTION & I PERMIT NO: 15060016 OWNER'S NAME: RAVILISETTY PAVAN K ET AL OWNER'S PHONE: 4089823467 11� LICENSED CONTRACTOR'S DECLARATION License Class_ Lic. # qo "/l! J 3 Contractor t ''S &n2frudeM Date I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. 1 hereby affirm under penalty of perjury one of the following two declarations: I have and will maintain a certificate of consent to self - insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the Z fiormance of the work for which this permit is issued. ve and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. APPLICANT CERTIFICATION 1 certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the i granting of this permit. Additionally, the applicant understands and will cet5pi with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. Signature t4 Dater l2 g115 ❑ OWNER- BUILDER DECLARATION I hereby affirm that I am exempt from the Contractor's License Law for one of the following two reasons: I, as owner of the property, or my employees with wages as their sole compensation. will do the work, and the structure is not intended or offered for sale (Sec.7044, Business & Professions Code) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.7044, Business & Professions Code). I hereby affirm under penalty of perjury one of the following three declarations: I have and will maintain a Certificate of Consent to self - insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Worker's Compensation laws of California. If, after making this certificate of exemption, I become subject to the Worker's Compensation provisions of the Labor Code, I must forthwith comply with such provisions or this permit shall be deemed revoked. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. Signature Date. 1011 S DE ANZA BLVD 1 DATE ISSUED: 08/1212015 SAN JOSE, CA 95129 1 PHONE NO: (408) 898 -6474 JOB DESCRIPTION: RESIDENTIAL ❑ COMMERCIAL ❑ ADD 498 S.F. TO FRONT OF SFD TO CREATE (N) LIVING RM, MASTER BEDROOM/BATH & LAUNDRY RM (NO OTHER REMODEL AREA IN (E) SFD) REV #1 - ADDING A SINK AND COUNTER IN (N) LIVING ROOM - ISSUED 11/24/15 Sq. Ft Floor Area: I Valuation: $110000 APN Number: 37531041.00 1 Oceupancc Type: PERMIT EXPIRES IF WORK IS NOT STARTED WITHIlV 180 DAY T ISSUANCE OR 180 ED INSPECTION. RE- ROOFS: All roofs shall be inspected prior to any roofing material being installed. If a roof is installed without first obtaining an inspection, I agree to remove all new materials for inspection. Signature of Applicant: Date: ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER HAZARDOUS MATERIALS DISCLOSURE 1 have read the hazardous materials requirements under Chapter 6.95 of the California Health & Safety Code, Sections 25505, 25533, and 25534. I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Section 25532(a) should I store or handle hazardous material. Additionally, should I use equipment or devices which emit hazardous air contaminants as defined by the Bay Area Air Quality Management District I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Sections , 25533, and 25534. Owner or authorized agent: Date: CONSTRUCTION LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of work's for which this permit is issued (Sec. 3097, Civ C.) Lender's Name Lender's Address ARCHITECT'S DECLARATION I understand my plans shall be used as public records. Licensed Professional !�I CONSTRUCTION PERMIT APPLICATICN COMhMUNI iY DEVELOPMENT DEPARTMiENT - BUILDING DIVISION 4e) 10300 TORRE AVENUE • CUPER T INO, CA 95014 -3255 P L=19 CUPERTINO (408) 777 -3228 • FAX (408) 777 -3333 - buildinorcuDertino.ora ❑ NEW CONSTRUCTION ❑ ADDITION . ❑ ALTERATION I ii 'ISIO DEFERRED ORIGIN?.L PERMIT g f'- 04,4,-V -Z PROJECT ADDP,FSS ` �` I ap R 0'H NER NAi y ?HOhB �ad n�na �,�n 6 Itic Qv L i SK g = ./.II 2— 3 6 k rn• -e..: Q> STRE�l 'DDR =SS I CITY, STATE, ZIP I FAX CGIvTACT N.Sl✓y /' ^ Pi30NM (� 8 MSII. 1 S Cons rOJ I r^ v� SIRE =t Y-DDR =SS j CITY, STA7�; FAX 1 ❑ OAq,-a ❑. O\%gZR•BUII-DER ❑ OMR.cRAGD.T ACON- &CTOR ❑ COh72 R4CTORAGMrr ❑ A =SECT ❑ ENGLKT -R ❑ DES =LOPr� ❑ Ii1.Ah'r CONTRACTORNANE L%` ?^ ^ �C I 1ICM\'SEWu'sERq0q I LTCsD"S =TYPE I BUS. LIC9 COIvfPANYNAAM � � � , E -NSII. LtG- f? J (� � FAX STREET ADDRESS ^ n Cri Y, STATE, ZIP PHOht qC) _ ARC:-11ECTrz)v0N =ER NEJ ✓,E LICENSE NUMBER I BUS. LIC 9 C01✓,PANYNAME I E -MAIL FAX STREET ADDRESS I CITY, STATE ME I PHONE LESCRTTIOA' OF WORK / =STING USE PROPOSED USE- CONSTATYPE 6STORTFS USE I TYPE I OCC. SQ.FT. I VALUATIONS) EXISTG hLW FLOOR DEMO TOTAL AREA AREA ER?A I h.l'AREA BAMIROOM KtTC!-� OTr=t REMODEL f.REA REMODEL AREA REMODEL ARF-A PORCH /.REA DECK AREA TOTAL DECK/PORC1 AREA G A. RAGE P.R':A: DETACH I [3 ATTAC-i I i �5,WLLINGtrhTrs: ISASECONDUNIT ❑YPS SECOND STORY ❑Y:S BEING ADDED? ❑NO ADDITION? r,]NO PR_•APPLICATION ❑ISS ffYS. PROVIDE COPY OF ISTHEBLDGAN El YES _ .'?�'> a x ; � TOT. LV. LUATION: PLAATING�VPL. ❑NO PLANND\GAMOVA-LEiTER I ETCHLER HO hit? ❑NO - "• I By my signature below, I certify to each of the following: I am the property ovmtr or authorized agent to act on th rope. owner's behalf. I have read this application and the information I have provide s r-,ect. I have read the Description of'Work an &verify it is actuate. -I agree to -comply -with- all applicable local ordinances and state laws relating to b i tion. I authorize representatives of Cupertino to enter t'- above- ident— d pro arty or inspection purposes. Signature of Appl icwt/Agent: Date: SUPPLE? ! ENTAL LNTFOR2� REQUIRED -_ a LTLIGVI # 'OY�R SEvCOII tTrR � —J 8I II DL\ GL i� Red 1Yr 1\ New or Multif - -,ni -y dv ellinc s: for demolition per-nit :or existing building(s). Demolition pe, rlit is required prior to issuance of building permit for new building. s ' - _ Commercial Bides: Provide a cornpleted Hazardous Materials Disclosure forth if any Hazardous Materials are being used as part of this project. �r tea' tiBlcuoRTCS Copy of Planning Approval Letter or Meeting with Planning prior to fi `xr Buildin Permit a lication. _. -ttz1 of mit PP BIdg.4pp_2011.doc revised 06121111 CITY OF CUPERTINO FEE ESTIMATOR - BUILDING DIVISION LmADDRESS: 10720 Minette Dr I DATE: 11123/2015 REVIEWED BY: Phuong 5M APN: 375 31 041 BP #: *VALUATION: Iso 'PERMIT TYPE: Building Permit PLAN CHECK TYPE: Alteration / Repair PRIMARY SFD or Duplex USE: Pi'Unib. Ins). 1<<4. PENTAMATION 1GENRES PERMIT TYPE: WORK 41 - adding a sink and counter at N living room. SCOPE NOTE. This estimate does not include fees due to other Departments (i.e. Planning, Public Works, Fire, Sanitary Sewer District, School District. etc). These fees are based on the nreliminary information available and are only an estimate. Contact the Dent for addn7 info. FEE ITEMS (Fee Resolution 11- 053F,�f. 7;'1/13) Vech. f'l:,n Check 's. Plan Check ;lr F71,7-, -, I'r`1'T,T ti 7, Plan Check Fee: Hourly Only? ® Yes (F) No h7ec. Pei mil i' olne; "h'ch. MT. Omc; i'i w,0 •. , :£,= Ins). b" t Pi'Unib. Ins). 1<<4. l.cec.. l ; , -. Fee: NOTE. This estimate does not include fees due to other Departments (i.e. Planning, Public Works, Fire, Sanitary Sewer District, School District. etc). These fees are based on the nreliminary information available and are only an estimate. Contact the Dent for addn7 info. FEE ITEMS (Fee Resolution 11- 053F,�f. 7;'1/13) FEE QTY /FEE MISC ITEMS Plan Check Fee: Hourly Only? ® Yes (F) No $0.00 71 hours $143.00 Plan Check, Hourly 1STPLNCK Suppl. PC Fee: (E) Reg. Q OT 0.0 hrs $0.00 PME Plan Check: $0.00 Permit Fee: Hourly Only? 0 Yes (!) No $0.00 Suppl. Insp. Feejq Reg. Q OT 0 0 hrs $0.00 PME Unit Fee: $0.00 PME Permit Fee: $0.00 Construction Lion T gat": .Idm•ianslrialive Fee: 0 Work Without Permit? ® Yes (!) No $0.00 Advanced Planning Fee: $0.00 Select a Non - Residential Building or Structure 0 i `rxtel l�o<:zraaseatlati<�rt F c�: Strong Motion Fee: $0.00 _ 1.0 hrs $143.00 Inspections tSTINSP Inspection, Hourly Bldg Stds Commission Fee: $0.00 SUBTOTALS: $0.00 $286.00 TOTAL FEE: 1 $286.00 Revised: 10/01/2015 f� �i�'C.IDJd` CONSTRUCTION PERMIT APPLICATION COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION 10300 TORRE AVENUE • CUPERTINO, CA 95014 -3255 CUPERTINO (408) 777 -3228 • FAX (4 08) 777 -3333 • building o1icupertino.ong q93 s 5-U60 o/� ❑ NEW CONSTRUCTION ADDITION ❑ ALTERATION / TI " REVISION / DEFERRED ORIGINAL PERMIT # J PROJECT ADDRESS /0 ,7 20 fq 1 . APN R 3 o C4 l OWNER NAME Q vayl PHONE )982 -3q6 Er r cco r�ec+a� Phcis STREET ADDRESS ADDRESS LL /YI! /'IL'f1� Z) r, CITY, STATE, ZIP ,,L C(,�N�! o FAX CONTACT NAME 1 PHO1�E4C) 21 F�t3 „6� E -MAIL/ ` \\ 11 O `� GL/ fS c OASdi -uG 0,0L STREET ADDRESS oil s. � 40 7-a 641d CrrY , STATE, ZIP S�- FAX O' ❑ OWNER ❑ OWNER - BUILDER ❑ OWNER AGENT © CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT CONTRACTOR NAME Za LICENSE NUMBER LICENSE TYPE BUS. LIC # 141, m OL K (' COMPANY NAME �JI►5 E - uL`S_Const►�uGtona� MAIL FAX STREET ADDRESS' o I S. An 2.0, 81 V'-4 CITY, STATE, ZIP + aS � J PHONE / ,� .tRCHITECT/ENGINEER NAME LICENSE NUMBER BUS. LICG ## COMPANY NAME E -MAIL FAX STREET ADDRESS CITY, STATE, ZIP PHONE DESCRIPTION OFWORK LJ r !(-o L ' n fe Eh1STING USE PROPOSED USE CONSTR TYPE Y. STORIES - USE TYPE OCC. SQ.FT. VALUATION ($) EXISTG - NEW FLOOR, DEMO TOTAL AREA AREA AREA NET AREA - BATHROOM KITCHEN OTHER REMODEL AREA REMODEL AREA REMODEL AREA PORCH AREA - DECK AREA TOTAL DECKTORCH ARE GARAGE AREA: DETACH ❑ ATTACH I # DWELLING UNITS: IS A SECOND UNIT ❑ YES SECOND STORY ❑ YES BEING ADDED? ❑NO ADDITION? []NO PRE - APPLICATION ❑ YES IF YES, PROVIDE COPY OF PLANNING APPL # ❑ NO PLANNING APPROVAL LETTER IS THE BLDG AN ❑ EICHLER HOME? ❑ NO RECEIVE - _ :. TOT VATION: ®oo By my signature below, I certify to each of the following: I am the property owner or act on i owner's behalf. have ad this application and the information I have provided is correct. I have read the Description of Work verify i ' rate. I agree to comply with all applicable local ordinances and state laws relating to b ilding construction. I aut orize representatives of Cupertino t r the above- identified property for inspection purposes. Signature of Applicant/ _ Date: !!5/ r� SUPPLEMENTAL INFORMATION REQUIRED Palrct�czTi�E rs „zocsLrP . . New SFD or Multifamily d«'ellings: Apply for demolition permit for ❑ OVER THE COUNTER a ❑ BTJII DUNG PLAN REVIEW existing building(s). Demolition permit is required prior to issuance of building = permit for new building. ❑ ExPiESS ❑ 01pI Axni�cpiAxxEw � � Commercial Bldgs: Provide a completed Hazardous Materials Disclosure �� � -:. � '�` �,v c� * �.#•r�3 i✓4 ❑ sTArtDARD -S' —� �'£,�S” ��'�- -e?6 $ iii' -"s`F ❑ pUBLICVSORKS .} _ form if any Hazardous Materials are being used as part ofthis project. f Copy of Planning Approval Letter or Meeting with Planning prior to � ❑ LARGE, '"` £ � � � L7 FII2EDE�TR �� _ � _ submittal of Building Permit application. ©� ' aRYsEwExDISTRICT, l� - _ x , > „ . EN'VIROIV'11SENTAI, H&AZTiI BldgApp_2011.doc revised 06/21/11 5h- 74 STATEbF CALIFORNIA Crnc.- rinti %in Rnciriontial Arirlitinnc 30o Ft2 or Less. or Additions That Do Not Require HERS Field Verification � B �,,— ,r„., _ _ _ _ _ _ _ CALIFORNIA ENERGY COMMISSION — CEGCF1R- ADD -02 -E Revised 01/15 CERTIFICATE OF COMPLIANCE CF Prescriptive Residential Additions 300 Ft (Pa ge 1 of 9) ADD 029E or Less, or Additions That Do Not Require HERS Field Verification (Pa Project Name: Date Prepared: 6/11/2015 Addition to Residence This compliance document is only applicable to additions 300 ft or less, or additions that do not require HERS field verification for compliance. When HERS verification is required, a CFIR- ADD -01 shall first be registered with a HERS Provider Data Registry. Alterations to Space Conditioning Systems that are exempt from HERS verification requirements may use the CF1R- ADD -02 and CF2R- ADD -02 Compliance Documents. Possible exemptions from duct leakage testing include: less than 40 ft of ducts were added or replaced; or the existing duct system was insulated with asbestos, or the existing duct system was previously tested and passed by a HERS Rater. If space conditioning systems are altered and are not exempt from HERS verification, then a CF1R- ADD -01 must be completed and registered with a HERS Provider Data Registry. Additions or alterations that utilize Closed Cell Spray Polyurethane Foam (ccSPF) with a density of 1.5 to less than 2.5 pounds per cubic foot having an R -value other than 5.8 per inch, or Open Cell Spray Polyurethane Foam (ocSPF) with a density of 0.4 to less than 1.5 pounds per cubic foot having an R -value of 3.6 per inch, shall complete and register a CFIR ADD -01 with a HERS Provider Data Registry. If more than one person has responsibility for installation of the items on this certificate, each person shall prepare and sign a certificate applicable to the portion of construction for which they are responsible. Alternatively, the person with chief responsibility for construction shall prepare and sign this certificate for the entire construction. All applicable Mandatory Measures shall be met. Temporary labels shall not be removed before verification by the building inspector. A. GENERAL INFORMATION 01 03 Project Name: Project Location: Addition to Residence 10720 Minette Dr. 02 04 Date Prepared: Building Front orientation (deg): 6/1/2015 320 05 CA City: Cupertino 06 Numberl nDiling Units with Additions: 1 07 Zip Code: 95014 08 F I Natural Gas 09 Climate Zone: 4 1A onditioned Floor Area (ft) (Addition): 552 ft2 11 Build' Type Single Family 2 Slab Area (ft2): n/a 13 roject Sco 552 ft2 Addition d by d' �a CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 I STATE) OF CALIFORNIA Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC CF1R ADD -02 -E (Revised 01/15) CERTIFICATE OF COMPLIANCE CF1R- ADD -02 -E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 2 of 9) Project Name: Addition to Residence Date Prepared: 6/1/2015 B. OPAQUE SURFACE DETAILS — Framed (Section 150.2(a)) 01 02 03 04 05 06 07 08 09 10 11 Tag /ID Assembly Type Frame Type Frame Depth (inches) Frame Spacing (inches) Proposed Required Comments Cavity R -value Continuous Insulation R -value LI- Factor Appendix JA4 Reference LI- Factor Table Cell Roof /Ceiling Wood 2x 24" oc R -30 0 .031 4.2.1 20A .031 Wall Wood 2x4 16" oc R -13' 0 .102 4.3.1 3A .102 "Addn. <700 ft2 min. R -13 Floor Wood 2x 16" oc R -19 0 .037 4.4.1 4A .037 CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 STATF, OF CALIFORNIA Prescriptive Residential Additions 300 FtZ or Less, or Additions That Do Not Require HERS Field Verification CEC -CF1 R- ADD -02 -E (Revised 01/15) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R- ADD -02 -E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 3 of 9) Project Name: Audition to Residence Date Prepared: 6/1/2015 C. OPAQUE SURFACE DETAILS — Non - framed (Section 150.1(c)1) 01 02 03 04 05 06 07 08 09 10 11 Tag /ID Assembly Type Assembly Materials Thickness (inches) Proposed Required Comments Core Insulation R -value Continuous Insulation R -value U- Factor Appendix JA4 Reference U- Factor from I Package A Table Cell n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a U- factor n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a D. OPAQUE SURFACE DETAILS — Mass Walls (Section 150.1(c)1) 01 02 03 04 05 06 07 O8 09 10 11 Tag /ID Walls Above Grade Mass Type Mass Thickness (inches) Furring Strip Thickness (inches) Proposed Required Interior Insulation Exterior Insulation Appendix JA4 Reference Interior Insulation Exterior Insulation R -value U- factor R -value U- factor Table Cell R -value U- factor R -value U- factor n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 STATE OF CALIFORNIA Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC -CF1 R- ADD -02 -E (Revised 01/15) CALIFORNIA ENERGY COMMISSION -"- CERTIFICATE OF COMPLIANCE CF1R- ADD -02 -E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 4 of 9) Project Name: Addition to Residence Date Prepared: 6/1/2015 E. SLAB INSULATION (Table 150.1 -A) 01 02 03 04 05 06 Floor Type Proposed Required Comments Insulation R -value Insulation U- factor Insulation R -value Insulation U- factor n/a n/a n/a n/a n/a • Heated slab floors require mandatory slab insulation (see Table 110.8 -A). F. RADIANT BARRIER (Section 150.1(c)2 01 02 Radiant Barrier installed below the roof deck and on all gable end walls Comments Yes (if roof is above attic space) Required below roof deck and on gable wall ends in attic A radiant barrier is required (for Climate Zones 2 -15) • Radiant barriers shall meet specific eligibility and installation criteria to receive energy credit for compliance with the Building Energy Efficiency Standards for low -rise residential buildings. Refer to RA4.2.1 • The emittance of the radiant barrier shall be less than or equal to 0.05 as tested in accordance with ASTM C1371 or ASTM E408. For Prescriptive Compliance the attic shall be ventilated to provide a minimum free ventilation area of not less than one square foot of vent area for each 300 ft2 of attic floor area with no less than 30 percent upper vents. Ridge vents or gable end vents are recommended to achieve the best performance. The material should be cut to allow for full airflow to the venting. CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 STATE OF CALIFORNIA Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC -CFIR- ADD -02 -E (Revised 01/15) CALIFORNIA ENERGY COMMISSION w CERTIFICATE OF COMPLIANCE CF1R- ADD -02 -E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 5 of 9) Project Name: Addition to Residence I Date Prepared: 6/1/2015 G. ROOFING PRODUCTS (COOL ROOF) (Section 150.1(c)11) 01 02 03 04 05 06 07 08 09 10 11 12 Mass Roof 25lb /ft2 or Greater Roof Pitch Method of Compliance Product Type CRRC Product ID Number Proposed Required Initial Solar Reflectance Aged Solar Reflectance Thermal Emittance SRI (Optional) Aged Solar Reflectance Thermal Emittance SRI (Optional) n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Maximum LI- factor SHGC Calculated Calculated based on Allowed ft 2 based on Allowed ft2 Allowed % Allowed >400 ft2 <700 ft2 138 ft2 120 ft2 27.6 ft2 60 ft2 .32 .25 NOTES: • Any roof area covered by building integrated photovoltaic panels and solar thermal panels are exempt from the above Cool Roof requirements. • Liquid field applied coatings must comply with installation criteria from section 110.8(i)4. H. FENESTRATION /GLAZING AREAS ALLOWED (Section 150.2(a)1) 01 02 1 03 04 05 06 07 08 Maximum Allowed Maximum Allowed Fenestration Area For All Orientations ft2 West- Facing Fenestration Area Only ft2 The Greater The Greater Maximum Maximum Addition Type ft 2 Allowed Allowed Comments Maximum Maximum Calculated Maximum Calculated Maximum LI- factor SHGC Calculated Calculated based on Allowed ft 2 based on Allowed ft2 Allowed % Allowed >400 ft2 <700 ft2 138 ft2 120 ft2 27.6 ft2 60 ft2 .32 .25 CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 STATE OF CALIFORNIA Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC -CF1 R- ADD -02 -E (Revised 01/15) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R- ADD -02 -E Prescriptive Re sidential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 6 of 9) Project Name: Addition to Residence I Date Prepared: 6/1/2015 I. FENESTRATION PROPOSED AREAS AND EFFICIENCIES 01 02 03 04 05 06 07 08 09 10 11 12 13 Tag /ID Fenestration Type Frame Type Dynamic Glazing Orientation N, S, W, E or Roof Number of Panes Proposed Fenestration Area ft2 Proposed West Facing factor Fenestration Area ft Proposed U - Proposed SHGC Source Exterior Shading Device Combined SHGC from CF1R -ENV- 03 Windows Any No N,W,E 2 65 ft2 26.5 ft2 .32 .25 NFRC No n/a Glazed Doors Any No E 2 33.4 ft2 0 ft2 .32 .25 NFRC No n/a 14 Total Proposed Fenestration Area 98.4 ft2 15 Maximum Allowed Fenestration Area 138 ft2 16 Compliance Statement Total Proposed Fenestration Area <_ Maximum Allowed Fenestration Area ® Yes ❑ No 17 Total Proposed West- Facing Fenestration Area 26.5 ft2 18 Maximum Allowed West- Facing Fenestration Area 60 ft2 19 Compliance Statement Total Proposed West- Facing Fenestration Area <_ Maximum Allowed West- Facing Fenestration Area ® Yes ❑ No 20 Proposed Fenestration U- factor •32 21 Required Fenestration U- factor •32 22 Compliance Statement Proposed Fenestration U- factor <_ Required Fenestration U- factor ® Yes ❑ No 23 Proposed Fenestration SHGC 25 24 Required Fenestration SHGC •25 25 Compliance Statement Proposed Fenestration SHGC <_ Required Fenestration SHGC ® Yes ❑ No CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 STATE OF CALIFORNIA Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC -CFIR- ADD -02 -E (Revised 01/15) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R- ADD -02 -E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 7 of 9) Project Name: Addition to Residence Date Prepared: 6/1/2015 J. SPACE CONDITIONING(SC) SYSTEMS - HEATING /COOLING (Prescriptive section 150.2(b). Alterations to Space Conditioning Systems shall be exempt from HERS verification requirements as prerequisite for use of the CF1R- ADD -02 and CF2R- ADD -02 Compliance Documents. If new space conditioning systems are installed or existing systems are altered and are not exempt from HERS verification, then a CFIR- ADD -01 shall be completed and registered with a HERS Provider Data Registry. In each row below for each dwelling unit in the building, check the box that indicates the exemption from HERS verification compliance: • a: space conditioning system was not altered; • b: less than 40 ft of ducts were added or replaced; • c: (exempt from duct leakage testing) if: the existing duct system was insulated with asbestos; • d: (exempt from duct leakage testing) if: the existing duct system was previously tested and passed by a HERS Rater. 01 02 03 04 Dwelling Unit Name SC System Identification or Name SC System Location or Area Served Exemption from HERS Verification 10720 Minette Dr. Existing HVAC System Existing +Addition ® a ® b ❑ c ❑ d No HERS verification required ❑ a ❑ b ❑ c ❑ d 0 0 0 0 0 0 0 13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 0 0 0 0 0 0 0 0 0 CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 STATE OF CALIFORNIA Prescriptive Residential Additions 300 Ft2 or Less, or Additions That Do Not Require HERS Field Verification CEC -CF1 R- ADD -02 -E (Revised 01/15) CALIFORNIA ENERGY COMMISSION CERTIFICATE OF COMPLIANCE CF1R- ADD -02 -E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 8 of 9) Project Name: Addition to Residence Date Prepared: 6/1/2015 K. WATER HEATING SYSTEMS (Section 150.1(c)8) List water heaters and boilers for both domestic hot water (DHW) heaters and hydronic space heating. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 Dwelling Unit Name Water Heating System Identification or Name Water Heating System Location or Area Served Water Heating System Type Water Heater Type # of Water Heaters in System Water Heater Storage Volume (gal) Fuel Type Rated Input Type Rated Input Value Heating Efficiency Type Heating Efficiency Value Standby Loss ( %) Exterior Insulation R -Value Back -Up Solar Savings Fraction 10720 Minette Water Htr. (e) Residence DHW Storage 1 40 Gal. Gas Btuh 40KBtu EF .58 n/a n/a n/a CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 STATE OF CALIFORNIA Prescriptive Residential Additions 300 FtZ or Less, or Additions That Do Not Require HERS Field Verification CEC -CFIR- ADD -02 -E (Revised 01/15) CALIFORNIA ENERGY COMMISSION '"N' CERTIFICATE OF COMPLIANCE CF1R- ADD -02 -E Prescriptive Residential Additions 300 Ft or Less, or Additions That Do Not Require HERS Field Verification (Page 9 of 9) Project Name: Addition to Residence Date Prepared: 6 /1/2015 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Documentation Author Signature: Mi,� Ku-wz. Michael Kunz, CEPE Company: Signature Date: Energy Performance Services 6/1/2015 Address: CEA/ HERS Certification Identification (if applicable): P.O. Box 7483 n/a City/State /Zip: Phone: South Lake Tahoe, CA 96158 888 - 828 -9488 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. The information provided on this Certificate of Compliance is true and correct. 2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design identified on this Certificate of Compliance (responsible designer). 3. That the energy features and performance specifications, materials, components, and manufactured devices for the building design or system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 4. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. 5. 1 will ensure that a registered copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a registered copy of this Certificate of Compliance is required to be included with the documentation the builder provides to the building owner at occupancy. Responsible Designer Name: Responsible Designer Signature: Mehrdad Zamani Company: Date Signed: Ali's Construction & Remodeling Inc. 6/1/2015 Address: License: 1011 S. De Anza Blvd. City /State /Zip: Phone: San Jose, CA 95129 408 -441 -0967 For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1- 800 - 772 -3300. CA Building Energy Efficiency Standards - 2013 Residential Compliance January 2015 2013 Low -Rise Residential Mandatory Measures Summary NOTE: Low -rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the comDliance aDDroach used. Exceptions may aDDly. Review the respective code section for more information. Building Envelope Measures: §I 10.6(a) 1: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. § 110.6(a)5: Fenestration products (except field- fabricated windows) have a label listing the certified U- Factor, certified Solar Heat Gain Coefficient SHGC and infiltration that meets therequirements of § 10 -111 (a). §110.7: Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed. § 110.8(a): Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R. §110.8(i): The thermal emittance and aged solar reflectance values of the cool roofing material meets the requirements of § 110.8(i) when the installation of a cool roof is specified on the CFIR. §110.80): A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CFIR. Minimum R -30 insulation in wood -frame ceiling; or the weighted average U- factor shall not exceed 0.031. Minimum R -19 in a §150.0(a): rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The attic access shall be gasketed to prevent air leakage. §150.0(b): Loose fill insulation shall conform with manufacturer's installed design labeled R- value. §150.0(c): Minimum R -13 insulation in 2x4 inch wood framing wall or have a U- factor of 0.102 or less (R -19 in 2x6 or 0.074 maximum U- factor ). §150.0(d): Minimum R -19 insulation in raised wood -frame floor or 0.037 maximum U- factor. §I50.0(g)1: In Climate Zones 14 and 16 a Class II vapor retarder shall be installed on the conditioned space side of all insulation in all exterior walls, vented attics and unvented attics with air-permeable insulation. § 150.0(g)2: In Climate Zones 1 -16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class II vapor retarder. In a building having a controlled ventilation crawl space, a Class I or Class 11 vapor retarder shall be placed over the earth floor of § 150.0(g)3: the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section 150.0(d). §150.0(1): Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3 %; have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration; and when installed as part of a heated slab floor meets the requirements of § 110.8 §I50.0(q): Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U- factor of 0.58; or the weighted average U- factor of all fenestration shall not exceed 0.58. Fireplaces, Decorative Gas Appliances and Gas Log Measures: §150.0(e)IA: Masonry or factory-built fireplaces have a closable metal or glass door covering the entire opening of the firebox. §150.0(e)1B: Masonry or factory-built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a readily accessible operable, and tight-fitting damper or a combustion -air control device. §150.0(e)IC: Masonry or factory-built fireplaces have a flue damper with a readily accessible control. § I50.0(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: §110.0- §110.3: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission. § 110.3(c)5: Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of § 110.3(c)5. Continuously burning pilot lights are prohibited for natural gas: fan-type central furnaces, household cooking appliances (appli- § 110.5: ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and spa heaters. §150.0(h)l: Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified in §150.0(h)2. § 150.0(h)3A: Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any dryer vent. §150.0(i): Heating systems are equipped with thermostats that meet the setback requirements of § 110.2(c). §150.00)IA: Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped with insulation having an installed thermal resistance of R -12 or greater. § 150.00)1B: Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water - heating systems, have R -12 external insulation or R -16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system § I50.00)2A: regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3 - A. § I50.00)2B: All domestic hot water pipes that are buried below grade must be installed in a water proof and non - crushable casing or sleeve that allows for installation, removal, and replacement of the enclosed pipe and insulation. 2011 Low -Rice Residential Mandatory Measures Summary Pipe for cooling system lines shall be insulated as specified in §150.00)2A. Piping insulation for steam and hydronic heating §150.00)2C: systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3 -A. § 150.00)3: Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For § I50.00)3A: example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or painted with coating that is water retardant and provides shielding from solar radiation that degrades the material. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I § I50.00)3B: or Class II vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class II vapor retarder. Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3 feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the §150.0(n)l: space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000 Btu/hr. §150.0(n)2: Recirculating loops serving multiple dwelling units shall meet the requirements of § 110.3(c)5. Solar water- heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC) § 150.0(n)3: or by a testing ens approved by the Executive Director. Ducts and Fans Measures: All air - distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CMC §601.05 §602.0, §603.0, §604.0, §605.0 and ANSI /SMACNA- 006 -2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R -6.0 (or higher if required by CMC §605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing (RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed § 150.0(m)l: with mastic, tape, or other duct - closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than '/4 inch, the combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross - sectional area of the ducts. Factory- Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints § 150.0(m)2: and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is used in combination with mastic and draw bands. Field- Fabricated Duct Systems shall comply with requirements for: pressure- sensitive tapes, mastics, sealants, and other §150.0(m)3-6: requirements specified for duct construction; duct insulation R -value ratings; duct insulation thickness; and duct labeling. All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic § I50.0(m)7: dampers. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers § 150.0(m)8: except combustion inlet and outlet air openings and elevator shaft vents. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum, § 150.0(m)9: sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation. §150.0(m)10: Flexible ducts cannot have porous inner cores. When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be §150.0(m)11: sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal §150.0(m)12: conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of §150.0(m)12. Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The §150.0(m)13: space conditioning system must also demonstrate airflow >_ 350 CFM per ton of nominal cooling capacity through the return grilles, and an air - handling unit fan efficacy <_ 0.58 W /CFM as confirmed by field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode, §150.0(m)15: an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of? 350 CFM per ton of nominal cooling capacity, and operating at an air - handling unit fan efficacy of <_ 0.58 W /CFM as confirmed by field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. _ All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of § 150.0(0): central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the Whole Building Ventilation. § 150.0(o)IA: Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Pool and Spa Heating Systems and Equipment Measures: Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency § 110.4(a): Regulations; an on -off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating. Hill Z I .nw_Riep Rpeidpntinl Mnnrintary Measures Summary v • Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction § 110.4(b)1 and return lines, or built-up connections for future solar heating. § 110.4(b)2: Outdoor pools or spas that have a heat pump or gas heater shall have a cover. Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro - § 110.4(b)3: rammed to run only during off-peak electric demand periods. §110.5: Natural gas pool and spa heaters shall not have a continuous burning pilot light. § 150.0(p): Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements. Lighting Measures: § 110.9: All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of § 110.9. Installed luminaires shall be classified as high - efficacy or low- efficacy for compliance with §I50.0(k) in accordance with TABLE §150.0(k)IA: 150.0 -A or TABLE 150.0 -B, as applicable. When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply §150.0(k)1B: with the applicable provisions of § 150.0(k). The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with §130.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has §150.0(k)1C: been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180 watts of low efficacy lighting er electrical box. §150.0(k)1D: Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no §150.0(k)IE: more than 5 watts of power per luminaire or exhaust fan as determined in accordance with §I30.0(c). Night lights do not need to be controlled by vacancy sensors. Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable §150.0(k)1F: requirements of § 15 0. 0 k . § 150.0(k)2A: High efficacy luminaires must be switched separately from low efficacy luminaires. §I50.0(k)2B: Exhaust fans shall be switched separately from lighting systems. § I50.0(k)2C: Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF. §150.0(k)2D: Controls and equipment are installed in accordance with manufacturer's instructions. § 150.0(k)2E: No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with § 150.0(k). §150.0(k)2F: Lighting controls comply with applicable requirements of §110.9. An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if: it functions as a dimmer § 150.0(k)2G: according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5; and all other requirements in §150.0(k)2. An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of § 150.0(k) if: it §150.0(k)2H: functions as a vacancy sensor according to §110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements of § 130.5 • and all other requirements in ' 150.0(k)2. A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the § 150.0(k)2I: functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in § 150.0(k)2. § 150.0(k)3A: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only § 150.0(k)3B: the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are considered kitchen lighting if they are not separately switched from kitchen lighting. Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated § 150.0(k)4: cabinet. A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom § 150.0(k)5: shall be high efficacy or controlled by vacancy sensors. Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and § I50.0(k)6: controlled by vacancy sensors. Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high §I50.0(k)7: efficacy, or shall be controlled by either dimmers or vacancy sensors. Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing §150.0(k)8: and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and allow ballast maintenance and replacement without requiring cutting holes in the ceiling. For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with § I50.0(k), the ballasts shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9. For single- family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements: i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and §150.0(k)9A: ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically reactivates the motion sensor within 6 hours; and iii. Controlled by one of the following methods: 7(11'2 Lnw_Ricp Rpcidential Mandatory Measures Summary a. Photocontrol not having an override or bypass switch that disables the photocontrol; or b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is programmed to automatically turn the outdoor lighting OFF during daylight hours; or c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of an astronomical time clock in accordance with § 110.9; meets the Installation Certification requirements in § 130.4; meets the requirements for an EMCS in § 130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and, is programmed to automatically turn the outdoor lighting OFF during daylight hours. For low -rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the §150.0(k)9B: following requirements: i. Shall comply with §I50.0(k)9A; or ii. Shall comply with the applicable requirements in § 110.9, § 130.0, § 130.2, ¢130.4, § 140.7 and § 141.0. For low -rise residential buildings with four or more dwelling units, outdoor lighting not regulated by § 150.0(k)9B or 150.0(k)9D § 150.0(k)9C: shall comply with the applicable requirements in ' 110.9, ' 130.0, ' 130.2, § 130.4, § 140.7 and ' 141.0. Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply §150.0(k)9D: with the applicable requirements in § 110.9, § 130.0, ' 130.2, § 130.4, ' 140.7 and § 141.0. Internally illuminated address signs shall comply with § 140.8; or shall consume no more than 5 watts of power as determined § I50.0(k)10: according to § 130.0(c). Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for §I50.0(k)11: nonresidential garages in § 110.9, § 130.0 ' 130.1 § 130.4, § 140.6 and ' 141.0. In a low -rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of §150.0(k)12A: the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or controlled by an occupant sensor. In a low -rise multifamily residential building where the total interior common area in a single building equals more than 20 percent of the floor area, permanently installed lighting in that building shall: i. Comply with the applicable requirements in § 110.9, § 130.0, § 130. 1, § 140.6 and § 141.0; and § 150.0(k)12B: ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of ingress and egress. Solar Ready Buildings: Single family residences located in subdivisions with ten or more single family residences and where the application for a §I 10.10(a)l: tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014, shall comply with the requirements of § 110.10 through § 110.10 e . § 110.10(a )2: Low -rise multi-family buildings shall comply with the requirements of §1 10.10(b) through §1 10.10(d). The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than 80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for § 110.10(b)l: buildings with roof areas greater than 10,000 square feet. For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less than 250 square feet. For low -rise multi - family buildings the solar zone shall be located on the roof or overhang of the building or on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area. § 110.10(b)2: All sections of the solar zone located on steep- sloped roofs shall be oriented between 110 degrees and 270 degrees of true north. No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be §110.10(b)3A: located in the solar zone. Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice §1 10.10(b)3B: the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the horizontal projection of the nearest point of the solar zone measured in the vertical plane. For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly § 110.10(b)4: indicated on the construction documents. The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit from the solar zone to the point of interconnection with the electrical service (for single family residences the point of § 110.10(c): interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water- heating system. A copy of the construction documents or a comparable document indicating the information from §1 10.10(b) through §1 10.10(c) §1 10.10(d): shall be provided to the occupant. §I 10.10(e)1: The main electrical service panel shall have a minimum busbar rating of 200 amps. The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a § 110.10(e)2: future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or main circuit location, and permanently marked as "For Future Solar Electric'.