Loading...
B-2016-3080CITY OF CUPERTINO BUILDING PERMIT BUILDINGADDRESS: CONTRACTOR: PERMIT NO: B-2016-3080 10411 STERLING BLVD CUPERTINO, CA 95014-3831 (375 26 001) WEST COAST SOLAR INC BRENTWOOD, CA 94513 OWNER'S NAME: MAHMOOD SHAHBAZ OWNER'S PHONE: 408-205-5847 T r!'1 ATQT."J't-%XTM A!WR nIQ-1—.n♦mr�wT License Class C-46 Lic. #908549 Contractor WEST COAST SOLAR INC Date 12/31/2017 I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. I hereby affirm under penalty of perjury one of the following two declarations: m. I have and will maintain a certificate of consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for Which this permit is issued. I have and will maintain Worker's Compensation Insurance, as provided for by r Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. Signature Date 04/20/2017 hereby affirm that I am exempt from the Contractor's License Law for one of the ving two reasons: m. I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec.7044, Business & Professions Code) 2. I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.7044, Business & Professions Code). DATE ISSUED: 11/09/2016 PHONE NO: (925) 516-3900 BUILDING PERMIT INFO: X BLDG X ELECT —PLUMB _ MECH X RESIDENTIAL _ COMMERCLAL JOB DESCRIPTION: (1) 16 -PANEL ROOF MOUNTED PV SYSTEM (4.4 KW) REV#2 - UPGRADE PANEL (200 AMP) ISSUED 04/20/2017 REV#1 - CHANGE INVERTER - ISSUED 01/10/2017 Sq. Ft Floor Area: I Valuation: $16000.00 APN Number: Occupancy Type: 375 26 001 PERMIT EXPIRES IF WORK IS NOT STARTED WITHIN 180 DAYS OF PERMIT ISSUANCE OR 180 DAYS FROM LAST CALLED INSPECTION. Issued by: ±h n e e,a Date: 11/09/2016 RE -ROOFS: All roofs shall be inspected prior to any roofing material being installed. If a roof is installed without first obtaining an inspection, I agree to remove all new materials for inspection. Signature ofApplicant: Date: 44/20/2017 I hereby affirm under penalty of perjury one of the following three declarations: ALL ROOF COVERINGS TO BE CLASS "A" m. I have and will maintain a Certificate of Consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2. I have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. s. I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Worker's Compensation laws of California. If, after making this certificate of exemption, I become subject to the Worker's Compensation provisions of the Labor Code, I must forthwith comply with such provisions or this permit shall be deemed revoked. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. Signature Date 04/20/2017 HAZARDOUS MATERIALS DISCLOSURE I have read the hazardous materials requirements under Chapter 6.95 of the California Health & Safety Code, Sections 25505, 25533, and 25534. I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Section 25532(a) should I store or handle hazardous material. Additionally, should I use equipment or devices which emit hazardous air contaminants as defined by the Bay Area Air Quality Management District I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety/Code, Sections 25505, 25533, and 25534. Owner or authorized agent:/ Date: 04/20/2017 N N I hereby affirm that there is a construction lending agency for the performance of work's for which this permit is issued (Sec. 3097, Civ C.) Lender's Name Lender's Address . ARCHITECT'S DECLARATION I understand my plans shall be used as public records. Licensed Professional CUPERTINO ALTERNATIVE ENERGY PERMIT APPLICATION COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISI 1 EVISIO 10300 TORRE AVENUE • CUPERTINO, CA 95014-3255 E�IA (408) 777-3228 • FAX (408) 777-3333 • building(g)cupertino.oro PVApp_2011.doc revised 03116/11 PROJECT ADDRESS ` / � , At L [f APN # OWNER NAME TP �0 PHONE �.11 — Za� p a E-MAIL STREET ADDRESS CITYTATEZIP FAX f � ��P' CONTACT NAME 1 ONE STREET ADDRESS /.SS L CITY, STATE, ZIPd `I .� FAX ❑ OWNER ❑ OWNER-BUIIAER ❑ OWNERAGENT ❑ CONTRACTOR 2CONTRACTORAGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT CONT ACTOR NAME / LICENSE NUMBER LICENSE TYPE BUS. LIC # COMPANY NAME E- FAX STREET ADDRESS CI STATE, ZIP PHONE ARCHITECTXNGINEER NAME LICENSE NUMBER BUS. LIC # COMPANY NAME E-MAIL FAX STREET ADDRESS CITY, STATE, ZIP PHONE USE OF ❑ SFD Or Duplex ❑ Multi -Family PROJECT IN RHLDLAND PROJECT IN STRUCTURE: ❑ Commercial URBAN INTERFACE AREA ❑ Yes ❑ NO FLOOD ZONE ❑ Yes 0 NO ❑ SOLAR. PANELS ❑ ELECTRIC VEHICLE CHARGING STATION ❑ SOLAR WATER HEATING ❑ OTHER: FOR SOLAR PANELS: NUMBER OF PANELS/UNITS: KILOWATTS (COMMERCIAL ONLY): TOTAL VALUATION: DESCRIPTION OF WORK F lSF� �7 /� f1 /-j 4L= C%C/ �/ /✓� �J ` S 1124 e/ldr w/j ,<— f;P .�Xj X/ra 61tj.� REC _f BY• L4 By my signature below, I certify to each of the following: I ain the property owner or authorized agent to act on the property owner's behalf. I have read this application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local ordinances and state laws relating to building constructio I authorize representatives of Cupertino to enter the above -identified property for inspection purposes. Signature ofApplicant/Age Dat : W. � 0 4 i c ( SUPPLEIANINFO A ON REQUIRED oFFIc vsE ONLY: OVER -THE COUNTER I� M- I] _ EXPRESS ©,STANDARD - LARGE -� MAJOR PVApp_2011.doc revised 03116/11 CITY OF CUPERTINO BUILDING PERM T BUILDING ADDRESS: CONTRACTOR: P DRMIT NO:B-2016-3080 10411 STERLING BLVD CUPERTINO,CA 95014-3831(375 26 001) ' WEST COAST SOLAR INC • BRENTWOOD,CA 94513 OWNER'S NAME: MAHMOOD SHABBAZ D•TE ISSUED:11/09/2016 OWNER'S PHONE:408-205-5847 P.ZONE NO:(925)516-3900 LICENSEDucENsEacDNTBAcmRaDicLARAnQm BUILDING PERMIT I 0: License Class C-39 Lic.#908549 Contractor WEST COAST SOLAR INC Date 12/31/2017 X BLDG _ELECT _P UMB MECH X RESIDENT COMMERCIAL I hereby affirm that I am licensed under the provisions of Chapter 9(commencing —with Section 7000)of Division 3 of the Business&Professions Code and that my license is in full force and effect. JOB DESCRIPTION: (N)16-PANEL ROOF MO TED PV SYSTEM(4.4 KW) I hereby affirm under penalty of perjury one of the following two declarations: REV#1-CHANGE I I'TER-ISSUED 01/10/2017 1. I have and will maintain a certificate of consent to self-insure for Worker's Compensation,as provided for by Section 3700 of the Labor Code,for the performance of the work for which this permit is issued. 2. I have and will maintain Worker's Compensation Insurance,as provided for by C1/` Section 3700 of the Labor Code,for the performance of the work for which this permit is issued. Sq.Ft Floor Area: Va uation:$16000.00 APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct.I agree to comply with all city and county ordinances APN Number: Oc upancy Type: and state laws relating to building construction,and hereby authorize 375 26 001 representatives of this city to enter upon the above mentioned property for inspection purposes. (We)agree to save indemnify and keep harmless the City of Cupertino against liabilities,judgments,costs,and expenses which PERMIT EXP I' S IF WORK IS NOT STARTED may accrue against said City in consequence of the granting of this permit. WITHIN 180 DAi S OF PERMIT ISSUANCE OR Additionally,the applicant understands and will comply with all non-point source regulations per the Cupertino Municipal Code,Section 9.18. 180 DAYS FRO LAST CALLED INSPECTION. C Signature Date 01/10/2017 Issued by bby-Ayeirde 9 de Date: 11/09/2016 OWNER-BUILDER ECLARATION I hereby affirm that I am exempt from the Contractor's License Law for one of the RE ROOFS: following two reasons: All roofs shall be inspected p'or to any roofing material being installed.If a roof is 1. I,as owner of the property,or my employees with wages as their sole installed without first obtainin_'an inspection,I agree to remove all new materials for compensation,will do the work,and the structure is not intended or offered for inspection. sale(Sec.7044,Business&Professions Code) 2. I,as owner of the property,am exclusively contracting with licensed Signature of Applicant: contractors to construct the project(Sec.7044,Business&Professions Code). Date:01/10/2017 I hereby affirm under penalty of perjury one of the following three declarations: ALL ROOF COVET' 1 GS TO BE CLASS"A"OR BETTER 1. I have and will maintain a Certificate of Consent to self-insure for Worker's Compensation,as provided for by Section 3700 of the Labor Code,for the performance of the work for which this permit is issued. HAZARD'US MATERIALS DISCLOSURE 2. I have and will maintain Worker's Compensation Insurance,as provided for by I have read the hazardous „aterials requirements under Chapter 6.95 of the Section 3700 of the Labor Code,for the performance of the work for which this California Health&Safe Code,Sections 25505,25533,and 25534. I will permit is issued, maintain compliance with t e Cupertino Municipal Code,Chapter 9.12 and the a. I certify that in the performance of the work for which this permit is issued,I Health&Safety Code,Se,tion 25532(a)should I store or handle hazardous shall not employ any person in any manner so as to become subject to the material. Additionally,shou d I use equipment or devices which emit hazardous air contaminants as defined.y the Bay Area Air Quality Management District I Worker's Compensation laws of California. If,after making this certificate of will maintain compliance wi h the Cupertino Municipal Code,Chapter 9.12 and exemption,I become subject to the Worker's Compensation provisions of the the Health&Safe , Code,Sections 25505,25533,and 25534. Labor Code,I must forthwith comply with such provisions or this permit shall be deemed revoked. C-Owner or authorized agen • APPLICANT CERTIFICATION Date:01/10/2017 I certify that I have read this application and state that the above information is , t UCTION L° IMG AGENCY correct.I agree to comply with all city and county ordinances and state laws I hereby affirm that there is construction. lending agency for the performance relating to building construction,and hereby authorize representatives of this city of work's for which this per it is issued(Sec.3097,Civ C.) to enter upon the above mentioned property for inspection purposes. (We)agree Lender's Name to save indemnify and keep harmless the City of Cupertino against liabilities, judgments,costs,and expenses which may accrue against said City in Lender's Address consequence of the granting of this permit. Additionally,the applicant understands and will comply with all non-point source regulations per the Cupertino Municipal ARC° TECT'S DECLARATION Code,Section 9.18. I understand my plans shall be used as public records. Licensed Signature Date 01/10/2017 Professional \ CONSTRUCTION PERMIT APPLICATION .. COMMUNITY DEVELOPMENT DEPARTMENT•B tny.'rafTB 4yx.r% 10300 TORRE AVENUE•CUPERTINO,CA 95014-I 2 5 CUPERTINO (408)777-3228•FAX(408)777-3333•buildinqAcupertino.orq ❑NEW CONSTRUCTION ❑ ADDITION ❑ ALTERATION/TI < REVISIO /DEFERRED ORIGINAL PERMIT# 13-274;16 _3C-)86 PROJECT ADDRESSAPN# OWNER NAME ... PHONEE-MAIL-MA/ d' � ‘//x/. AD ,ci4 ie ?/7 ag-2-AC'7s r�Y 7 STREET ADDRESS p. CITY,STATE,ZIP �y FAX /0 W/ 5'T.�.0 l(/' fr [43 A1®s r.7--2,00 6 54/4 CONTACT NAME . \/ PHONE E-MAIL STREET ADDRESS �' CIT STATE,ZIP FAX Z/SS .*G,e,, c.,CJ,�o� A /'" /,,„„---4/.)'O,3D l�%. tel'y's-/13 ,ZS- 5:-/C-3'S 3,,S 1:1 OWNER 0 OWNER-BUILDER 0 OWNER AGENT 0 CONTRACTOR L ONTRACTOR AGENT 0 ARCHITECT 0 ENGINEER 0 DEVELOPER 0 TENANT CONTRACTOR NAME J E //� S LICENSE NUMBER o��t/ LICENSE�TYPEG tP BUS.LIC# COMPANY NAME '/� /11"-/),(4;.4"/L) ��/ /� E-MAI[ a Z 7 FAX /4s�7-- �o/t-rr ,;dZit-.2 ,2,v,�r�P sre�.✓rs7-soc t•• CO 77' rZs'-f/c-37 ?fes . STREET ADD S CITY STATE,ZIP PHONE Zi-S ?z-rc>A)s f y _1- . ilit.f JI--Ava0.1) a. 5.'ySP/ `3 52s-516 3 0 d ARCHITECT/ENGINEER NAME / LICENSE NUMBER BUS.LIC# COMPANY NAME E-MAIL FAX STREET ADDRESS CITY,STATE,ZIP PHONE DESCRIPTION OF WORK C 1,3--12:::(1.92-- EXISTING `_ ii. `-- EXISTING USE PROPOSED USE CONSTR.TYPE #STORIES USE TYPE OCC. SQ.FT. VALUATION($) EXISTG NEW FLOOR DEMO - TOTAL AREA AREA AREA NET AREA BATHROOM KITCHEN OTHER REMODEL AREA REMODEL AREA REMODEL AREA PORCH AREA DECK AREA TOTAL DECK/PORCH AREA GARAGE AREA: ❑DETACH ❑ATTACH #DWELLING UNITS: IS A SECOND UNIT DYES SECOND STORY DYES BEING ADDED? ❑NO ADDITION? ❑NO J, � PLA-APPLICATION DYES IF YES,PROVIDE COPY IS THE BLDG AN 0 YES REC D`j l elf! TOTAL VALUATION: PLANNING APPL# ❑NO PLANNING APPROVAL LETTER EICHLERHOME? ❑NO By my signature below,I certify to each of the following: I am the property owner or authorized agent to act on the property owner's behalf. I have read this application and the information I'have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local ordinances and state laws relating to build 1_,..-onstruction. I authorize representatives of Cupertino to enter the above-identified property for inspection purposes. Signature of Applicant/Agent: i Date: /- 76 • /Z SUPPLEMENT,"., 1.1 FO• eirON REQUIRED PLAN CHECK TYPE ROUTING SLIP _ New SFD or Multifamily dwellings: Apply for demolition permit for ❑ OVER-THE-COUNTER 0 BUILDING PLAN REVIEW existing building(s). Demolition permit is required prior to issuance of building permit for new building. ❑ EXPRESS 0 PLANNING PLAN REVIEW - Commercial Bldgs: Provide a completed Hazardous Materials Disclosure ❑ STANDARD ❑ PUBLIC WORKS form if any Hazardous Materials are being used as part of this project. ❑ LARGE ❑ FIRE DEPT Copy of Planning Approval Letter or Meeting with Planning prior to submittal of Building Permit application. ❑ MAJOR 111 SANITARY SEWER DISTRICT ❑ ENVIRONMENTAL HEALTH BldgApp_2011.doc revised 06/21/11 61 CITY OF CUPERTINO BUILDING PERMIT BUILDING ADDRESS: CONTRACTOR: PE RMIT NO: B-2016-3080 10411 STERLING BLVD CUPERTINO, CA 95014-3831 (375 26 001) WEST COAST SOLAR INC BRENTWOOD, CA 94513 OWNER'S NAME: MAHMOOD SHAIMAZ DATE ISSUED: 11/09/2016 OWNER'S PHONE: 408-205-5847 PH NE NO: (925) 516-3900 LICENSED CONTRACTOR'S DECLARATION BUILDING PERMIT O: License Class C_39 Lie. #908549 Contractor WEST COAST SOLAR INC Date 12/31/2017 X BLDG _ ELECT _PLUMB I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing MECH X RESIDENT COMMERCIAL with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. JOB DESCRIPTION: (N) 16 -PANEL ROOF MO TED PV SYSTEM (4.4 KW) I hereby affirm under penalty of perjury one of the following two declarations: REV#1 - CHANGE INVERTER - ISSUED 01/10/2017 t. I have and will maintain a certificate of consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued, f t/ 2. I have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. Sq. Ft Floor Area: Valuation: $16000.00 APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances APN Number: Occupancy Type: and state laws relating to building construction, and hereby authorize 375 26 001 representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which PERMIT EXPI S IF WORK IS NOT STARTED may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point WITHIN 180 DAYSOF PERMIT ISSUANCE OR source regulations per the Cupertino Municipal Code, Section 9.18. 180 DAYS FROM LAST CALLED INSPECTION. Signature Date 01/10/2017 Issued bykAb2y2knmi&e Date: 11/09/2016 ECLARAIT I hereby affirm that I am exempt from the Contractor's License Law for one of the RE -ROOFS: following two reasons: All roofs shall be inspected pi 'or to any roofing material being installed. If a roof is 1. I, as owner of the property, or my employees with wages as their sole installed without first obtaiiiing an inspection, I agree to remove all new materials for compensation, will do the work, and the structure is not intended or offered for inspection. sale (Sec.7044, Business & Professions Code) 2. I, as owner of the property, am exclusively contracting with licensed Signature of Applicant: contractors to construct the project (Sec.7044, Business & Professions Code). Date: 01/10/2017 I hereby affirm under penalty of perjury one of the following three declarations:ALL ROOF COVE GS TO BE CLASS "A" OR BETTER t. 1 have and will maintain a Certificate of Consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. HAZARD US M ERIALS DISCLOSURE 2. I have and will maintain Worker's Compensation Insurance, as provided for by I have read the hazardous aterials requirements under Chapter 6.95 of the Section 3700 of the Labor Code, for the performance of the work for which this California Health & Safer y Code, Sections 25505, 25533, and 25534. 1 will permit is issued. maintain compliance with tt e Cupertino Municipal Code, Chapter 9.12 and the s. I certify that in the performance of the work for which this permit is issued, I Health & Safety Code, Section 25532(a) should I store or handle hazardous shall not employ any person in any manner so as to become subject to the material. Additionally, sho d I use equipment or devices which emit hazardous air contaminants as defined by the Bay Area Air Quality Management District I Worker's Compensation laws of California. If, after making this certificate of will maintain compliance wii It the Cupertino Municipal Code, Chapter 9.12 and exemption, I become subject to the Worker's Compensation provisions of the the Health & Safet y Code, Sections 25505, 25533, and 25534. Labor Code, I must forthwith comply with such provisions or this permit shall be deemed revoked. C —)/ -Owner or authorized agen • APPLICANT CERTIFICATION Date: 01/10/2017 I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws I hereby affirm that there is it construction lending agency for the performance relating to building construction, and hereby authorize representatives of this city of work's for which this permit is issued (Sec. 3097, Civ C.) to enter upon the above mentioned property for inspection purposes. (We) agree Lender's Name to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in . Lender's Address consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal ARCHITECT'S DE CLARATION Code, Section 9.18. 1 understand my plans shall be used as public records. Licensed Signature Date 01/10/2017 Professional CONSTRUCTION PERMIT APPLICATION COMMUNITY DEVELOPMENT DEPARTMENT • B I 10,qO 10300 TORRE AVENUE • CUPERTINO, CA 95014- 2 5 Ct3f'ERT I N£? j (408) 777-3228 • FAX (408) 777-3333 • buildingAcupertino.org ❑ NEW CONSTRUCIITION ❑ ADDITION ❑ ALTERATION / TT RF/ TIFF ORIGINAL PERMIT # T✓ — -2, a,t6 —3®vV PROJECT ADDRESS APN # OWNERNAME PHONE., P�s �� MAIL STREET ADDRESS � zalp CITY, STATEeZIP FAX Ld p/ �4 CONTACT NAME - PHO;2S MAIL 30 s �� j c !` sti ` Gf2 C PJ STREET ADDRESS CITY,STATE, ZIPFAX ❑ OWNER ❑ OWNER -BUILDER ❑ OWNERAGENT ❑ CONTRACTOR 13'CONTRACTORAGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT CONTRACTOR NAME LICENSE NUMBER LICENSE TYPE BUS. LIC # COMPANY NA 4 EMA� FAX Z STREET ADD S CITY STATE, ZIP PHONE ARCHITECT/ENGINEER NAME LICENSE NUMBER BUS. LIC # COMPANY NAME E-MAIL FAX STREET ADDRESS CITY, STATE, ZIP PHONE DESCRIPTION OF WORK EXISTING USE PROPOSED USE CONSTR. TYPE # STORIES USE TYPE OCC. SQ.FT. VALUATION ($) EXLSTG NEW FLOOR DEMO - TOTAL AREA AREA AREA NETAREA BATHROOM KITCHEN OTHER REMODEL AREA REMODEL AREA REMODEL AREA PORCH AREA DECK AREA TOTAL DECK/PORCH AREA GARAGE AREA: DETACH ❑ ATTACH # DWELLING UNITS: IS A SECOND UNIT ❑ YES SECOND STORY ❑ YES BEINGADDED? []NO ADDITION? ❑NO PRE -APPLICATION ❑ YES IF YES, PROVIDE COPY OF IS THE BLDG AN ❑ YES REC D B TOTAL VALUATION: PLANNING APPL # ❑ NO PLANNING APPROVAL LETTER EICHLER HOME? ❑ NO By my signature below, I certify to each of the following: I am the property owner or authorized agent to act on the property owner's behalf. I have read this application and the information I have provided is correct. I have read the Description of Work and verify it is accurate I agree to comply with all applicable local ordinances and state laws relating to buil ' onstruction. I authorize representatives of Cupertino to enter the above -i lentitied property for inspection purposes. Signature of Applicant/Agent: Date: SUPPLEMENT FO A ON REQUIRED PLAN CHECK TYPE ROUTING SLIP ❑ ovER-THE-coUNTER ❑ BUILDINGPLAN REVIEW _ New SFD or Multifamily dwellings: Apply for demolition permit for existing building(s). Demolition permit is required prior to issuance of building permit for new building. ❑ EXPRESS ❑ PLANNING PLAN REVIEW _ Commercial Bldgs: Provide a completed Hazardous Materials Disclosure ❑ STANDARD ❑ PUBLIC WORKS form if any Hazardous Materials are being used as part of this project. ❑ LARGE ❑ FIRE DEPT _ Copy of Planning Approval Letter or Meeting with Planning prior to ❑ MAJOR ❑ SANITARY SEWER DISTRICT submittal of Building Permit application. ❑ ENVIRONMENTAL HEALTH BldgApp_2011.doe revised 06/21111 CITY OF CUPERTINO BUILDING PERMIT I BUILDINGADDRESS: CONTRACTOR: PERMIT NO: B-2016-3080 10411 STERLING BLVD CUPERTINO, CA 95014-3831 (375 26 001) WEST COAST SOLAR INC BRENTWOOD, CA 94513 I OWNER'S NAME: MAHMOOD SHAHBAZ I IDATE ISSUED: 11/09/2016 OWNER'S PHONE: 408-205=5847 1 1PHONE NO: (925) 516-3900 License Class C-46: C-39 Lic. #908549 Contractor WEST COAST SOLAR INC Date 12/31/2017 I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. I hereby affirm under penalty of perjury one of the following two declarations: 1. I have and will maintain a certificate of consent to self -insure for Worker's ./Compensation, as provided for by Section 3700 of the Labor Code, for the t /� erformance of the work for which this permit is issued. have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. APPLICANT CERTIFICATION certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. Date 11/9/2016 I hereby affirm that I am exempt from the Contractor's License Law for one of the following two reasons: 1. I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec.7044, Business & Professions Code) 2. I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.7044, Business & Professions Code). I hereby affirm under penalty of perjury one of the following three declarations: 1. I have and will maintain a Certificate of Consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2. I have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Worker's Compensation laws of California. If, after making this certificate of exemption, I become subject to the Worker's Compensation provisions of the Labor Code, I must forthwith comply with such provisions or this permit shall be deemed revoked. APPLICANT CERTIFICATION { I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. Signature Date 11/9/2016 PERMIT INFO: X BLDG —ELECT —PLUMB _ MECH X RESIDENTIAL _ COMMERCIAL JOB DESCRIPTION: (N) 16 -PANEL ROOF MOUNTED PV SYSTEM (4.4 KW) Sq. Ft Floor Area: I Valuation: $16000.00 "N Number: Occupancy Type: 375 26 001 PERMIT EXPIRES IF WORK IS NOT STARTED WITHIN 180 DAYS OF PERMIT ISSUANCE OR 180 DAYS FROM LAST CALLED INSPECTION. by: Abby Aye ride RE -ROOFS: All roofs shall be inspected prior to any roofing material being installed. If a roof is installed without first obtaining an inspection, I agree to remove all new materials for inspection. ture of Applicant: 11/9/2016 ALL ROOF COVERINGS TO BE CLASS "A" OR HAZARDOUS MATERIALS DISCLOSURE I have read the hazardous materials requirements under Chapter 6.95 of the California Health & Safety Code, Sections 25505, 25533, and 25534. I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Section 25532(a) should I store or handle hazardous material. Additionally, should I use equipment or devices which emit hazardous air contaminants as deTmed by the Bay Area Air Quality Management District I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Sections 25505, 25533, and 25534. Owner or authorized agent: Date: 11 /9/2016 hereby affirm that there is a construction lending agency for the performance of work's for which this permit is issued (Sec. 3097, Civ C.) Lender's Name Lender's Address ARCHITECT'S DECLARATION I understand my plans shall be used as public records. Licensed ALTERNATIVE ENERGY PERMIT APPLICATION COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION 10300 TORRE AVENUE • CUPERTINO, CA 95014-3255 (408) 777-3228 -:FAX (408) 777-3333 • buildinga—cupertino.org l PROJECT ADDRESS \ APN # 1b,001 0 OWNER NAME PHONE E-MAIL _111XJ 1*�1 C rs r�o STREET ADDRESS CIT STATE, ZIP FAX CONTACT NAME PHONE E-MAIL STRUCTURE: URUSOLAR PANELS ❑ ELECTRIC VEHICLE CHARGING STATION ❑ SOLAR WATER HEATING ❑ OTHER: FOR SOLAR PANELS: NUMBER OF PANELS/UNITS: �j KILOWATTS (COMMERCIAL ONLY): TOTAL VALUATION: l (o doh DESCRIPTION OF WORK r _ By my signature below, I certify to each of the following: I am the property owner or authorized agent to act on the property owner's behalf. I have read this application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local ordinances and state laws relating to building cons tnr tion. I authorize representatives of Cupertino to enter the above -identified property for inspection purposes. Signature of Applicant/Agent: Date: stTPPLBKENTALNPORMATION REQUIRED rix fr zts xrtr v , , ° PVApp2011.doc revised 03/16/11 STREET ADDRESSCITY, STATE, ZIP FAX 0:71s'Z I s s/ ieS / S ❑ OWNER ❑ OwNER-BUII,DER ❑ OWNER AGENT ❑ CONTRACTOR M<ONTRACTOR AGENT ❑. ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT CONTRACTOR NAME ,� LICENSE NUMBER �r0�' LICENSE TYPE BUS. LIC #� ^y 3 X / /o c tet. e ve C COMPpANY NAMEE- FAX STREET ADDRESS - CITY, STATE, ZIP PHONE !S /")s L4>11 c//%; r .rl W60IP '9 Z -- 5 6d ARCHITECT/ENGINEER NAME/ LICENSE NUMBER BUS. LIC # COMPANY NAME E-MAIL FAX STREET ADDRESS ' CITY, STATE, ZIP PHONE USE OF ❑ SFD Or Duplex ❑ Multi -Family PROJECT IN WILDLAND PROJECT IN ❑ C-mmercial URBAN INTERFACE AREA ❑ Yes ❑ NO FLOOD ZONE ❑ Yes ❑ NO STRUCTURE: URUSOLAR PANELS ❑ ELECTRIC VEHICLE CHARGING STATION ❑ SOLAR WATER HEATING ❑ OTHER: FOR SOLAR PANELS: NUMBER OF PANELS/UNITS: �j KILOWATTS (COMMERCIAL ONLY): TOTAL VALUATION: l (o doh DESCRIPTION OF WORK r _ By my signature below, I certify to each of the following: I am the property owner or authorized agent to act on the property owner's behalf. I have read this application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local ordinances and state laws relating to building cons tnr tion. I authorize representatives of Cupertino to enter the above -identified property for inspection purposes. Signature of Applicant/Agent: Date: stTPPLBKENTALNPORMATION REQUIRED rix fr zts xrtr v , , ° PVApp2011.doc revised 03/16/11 PHOTOVOLTAIC SYSTEM 4.4KW DC MAHMOOD RESIDENCE 10411 STERLING BOULEVARD, CUPERTINO, CA 95014 PROJECT DATA GENERAL NOTES VICINITY MAP PROJECT 10411 STERLING BOULEVARD, ADDRESS: CUPERTINO, CA 95014 1. ALL COMPONENTS ARE UL LISTED AND CEC CERTIFIED, WHERE WARRANTED. 2. THE SOLAR PV SYSTEM WILL BE INSTALLED IN ACCORDANCE WITH ARTICLE 690 OF THE 2013 CEC AND 2013 CBC. OWNER: MAHMOOD, SHAHBAZ x 10411 STERLING BOULEVARD, 3. WHERE METALLIC CONDUIT CONTAINING DC CONDUCTORS IS USED INSIDE THE BUILDING, IT SHALL BE IDENTIFIED AS "CAUTION: ' CUPERTINO, CA 95014 SOLAR CIRCUIT" EVERY LOFT.. 408-205-5847 4. A DC DISCONNECTING MEANS SHALL BE INSTALLED AT A READILY ACCESSIBLE LOCATION EITHER OUTSIDE OF THE BUILDING OR STRUCTURE OR INSIDE NEAREST POINT OF ENTRANCE OF THE SYSTEM CONDUCTORS AS PER SECTION 690.14 OF THE CEC. 5. HEIGHT OF THE INTEGRATED AC/DC DISCONNECT SHALL NOT EXCEED 6'-7" PER NEC CODE 240.24. CONTRACTOR: WEST COAST SOLAR, INC Tt°' 6. A GROUNDING ELECTRODE SYSTEM IN ACCORDANCE WITH CEC 690.47 AND 250.50 THROUGH 60 AND 250-166 SHALL BE PROVIDED. PER CEC GROUNDING ELECTRODE SYSTEM OF EXISTING BUILDING MAY BE USED AND BONDED TO THE SERVICE ENTRANCE. IF SHEET I N D EX - °- EXISTING SYSTEM IS INACCESSIBLE OR INADEQUATE SUPPLEMENTAL GROUNDING ELECTRODE WILL BE USED ATTHE INVERTER PV -1: COVER SHEET LOCATION CONSISTING OF A UL LISTED 8 FT. GROUND ROD WITH ACORN CLAMP. GROUNDING ELECTRODE CONDUCTORS SHALL BE NO LESS THAN #8 AWG AND NO LARGER THAN #6 AWG COPPER AND BONDED TO THE EXISTING GROUNDING ELECTRODE TO PROVIDE FOR A COMPLETE SYSTEM. PV -2: SITE PLAN PV -3: FRAMING PLAN DESIGNER: 7. PHOTOVOLTAIC MODULES ARE TO BE CONSIDERED NON-COMBUSTIBLE. PV -4: c-yj ROOF PLAN Y 8. PHOTOVOLTAIC INSTALLATION WILL NOT OBSTRUCT ANY PLUMBING. MECHANICAL, OR BUILDING ROOF VENTS. PV -5: SINGLE LINE DIAGRAM - THE SMOKE ALARMS SHALL BE INSTALLED OR VERIFY TO ENSURE THE SMOKE ALARMS ALREADY EXISTING WHEN q - ;'c ALTERATION OR REPAIR TO GROUP R-30CCUPANCY EXCEEDS $1,000 CRC R314.6. PV -6: SIGNAGE SCHEDUCI= PV -7: OPTIMIZER MAP A. ON THE CEILING OR WALLS OUTSIDE OF EACH SEPARATE SLEEPING AREA IN THE IMMEDIATE VICINITY OF BEDROOMS SP -1: MODULE SPEC. B. IN EACH ROOM USED FOR SLEEPING PURPOSES, SP -2: INVERTER SPEC. SCOPE: 4.4KW DC ROOF MOUNT C. IN EACH STORY WITHIN A DWELLING UNIT, INCLUDING BASEMENTS BUT NOT INCLUDING CRAWL SPACES AND SP -3: OPTIMIZER SPEC. SOLAR SYSTEM WITH UNINHABITABLE ATTICS. SP -4: RACKING SPEC. 16 HANWHA SOLAR D. ALL SMOKE ALARMS SHALL BE LISTED IN ACCORDANCE WITH UL217 AND INSTALLED IN ACCORDANCE WITH THE SP -5: QUICKBOLT SPEC. 275W PV MODULES AND PROVISIONS OFTHIS CODE AND THE HOUSEHOLD FIRE WARNING EQUIPMENT PROVISIONS OF NFPA 72. SYSTEMS AND SP -6: GROUNDING SPEC. A SOLAREDGE COMPONENTS SHALL BE CALIFORNIA STATE FIRE MARSHAL LISTED AND APPROVED IN ACCORDANCE WITH CA CODE OF SE5000A-US INVERTER REGULATIONS, TITLE 19, DIVISIONI FOR PURPOSE FOR WHICH THEYARE INSTALLED. CODE REFERENCES CARBON MONOXIDE ALARMS IF NOT ALREADY EXISTING ARE REQUIRED TO BE INSTALLED WITHIN A DWELLING WHEN APN: THE VALUATION OF AN ADDITION, ALTERATION OR REPAIR TO GROUP R-3 OCCUPANCY EXCEEDS $1,000 CRC R315.2 PROJECT TO COMPLY WITH THE FOLLOWING: CARBON MONOXIDE ALARMS ARE REQUIRED AT THE FOLLOWING LOCATIONS: LOT AREA: A. ON THE CEILING OR WALLS OUTSIDE OF EACH SEPARATE SLEEPING AREA IN THE IMMEDIATE VICINITY OF BEDROOMS CALIFORNIA CODE OF REGULATIONS, TITLE 24 B. ON EACH STORY WITHIN A DWELLING UNIT, INCLUDING BASEMENTS. 2013 CALIFORNIA BUILDING CODE (CBC) LIVING AREA: 2013 CALIFORNIA MECHANICAL CODE (CBC) C. THE CARBON MONOXIDE ALARMS SHALL BE LISTED AS THE REQUIREMENTS OF 2034. CARBON 2013 CALIFORNIA PLUMBING CODE (CPC) MONOXIDE DETECTORS SHALL BE INSTALLED IN ACCORDANCE OD - - -. _IOION OF NFPA 720 "STANDARDFOR THE INSTALLATION OF CARBON MONOXIDE (CO ET N AND WARNING EQUIPMENT" AND THE 2013 CALIFORNIA ELECTRICAL CODE (CEC) MANUFACTURER'S INSTALLATION INSTRUCTIONS PER 2010 CRC 3R-,oldlng Department 2013 CALIFORNIA ENERGY CODE INSTALLATION TO COMPLY WITH ARTICLE 890 OF REV -F D - =R CODE " NIPI ANC_ THE 2013 NEC. REvi-wed 3y,ADD, A _ - - Dale' Lu u z Lu I"I j N w o Lu 0C ° 6 JHUALDA 1e. 10.28.16 scale SH—TITLE: COVER SHEET SHEET: PV -1 N � �rr, U CD (E)125AI240V W MHIN SERVICE PHNEL O� Cn \ \ (N)INVERTER� -- U J I DRIVE WAY w U z o 0 I—I a a L Jo m ❑ o w� mu E:1W zo z F 2 PV MODULES Do O D1 a 160" AZIMUTH .i 2:12 (10°) PITCH ❑ :� U ti o J 14 PV MODULES Q� 250° AZIMUTH W 2:12(10") PITCH H c Ln G O REVISIONS C \ r \ v / O ()RH1�N BY SATE JHUALDA 10.28.16 \ av 1/16"=V-0" S HEETTITLE. NO. SITE PLAN Building Dep aftment OMPLIANCE SHEET: Reviewed B, AN _ PV -2 IRONRIDGE� LXR10 RAIL (TYPICAL) 3' MIN. SOLAR ROOF QUICKBOLT SPAN -4FT. TO MEET ASCE 7-10 WITH WIND SPEED AT 110 MPH ZONE 2 (TYPICAL) 1. 2:12 (101) ROOF PITCH 2. 2X4 OF TRUSS @ 24" O.C. 3. TORCHDOWN COMP ROOF 4. ONE STRING OF 16 MODULES 5. (16) HANWHA MODULES 6.(1) SE5000A-US SOLAREDGE 7.(16) SOLAREDGE P300 OPTIMIZERS 8. IRONRIDGE XR10 RAIL 9. QUICKBOLT 10. WEEB CLAMPS & LUGS FOR PV GROUNDING SOLAR ROOF QUICKBOLT _z SPAN -6FT. TO MEET ASCE 7-10 WITH WIND n SPEED AT 110 MPH /ZONE 1 (TYPICAL) —I F.'�' U Q 3 v TORCHDOWN COMP ROOFf,.� .. 2/12 (10-) ROOF PITCH - s CD - 2� - o - PV MODULE Itrn J 3� 2X4 DF TRUSS LOAD CALCULATIONS Job Names: MAHMOOD RESIDENCE @ 24" O.C. Site Addres : 10411 STERLING BOULEVARD, CUPERTINO, CA 95014 System Size: 4.4 KW DC SEE MOUNTING DETAIL Z Module: —1-L ,_'_ - - _ _'='._ Module in array 16 Module area 17.97 Module weight -lbs 41.45 Total array area 287.52 Total module weight 663.20 Lbs./Sq. Ft. (less than 5 - OK) ' _ Racking lbs/module 1 Number of vertical support 30 Total racking weight -lbs 16 Lbs. per support (less than 45 - OK) ' Total Array weight - __: IRONRIDGE� LXR10 RAIL (TYPICAL) 3' MIN. SOLAR ROOF QUICKBOLT SPAN -4FT. TO MEET ASCE 7-10 WITH WIND SPEED AT 110 MPH ZONE 2 (TYPICAL) 1. 2:12 (101) ROOF PITCH 2. 2X4 OF TRUSS @ 24" O.C. 3. TORCHDOWN COMP ROOF 4. ONE STRING OF 16 MODULES 5. (16) HANWHA MODULES 6.(1) SE5000A-US SOLAREDGE 7.(16) SOLAREDGE P300 OPTIMIZERS 8. IRONRIDGE XR10 RAIL 9. QUICKBOLT 10. WEEB CLAMPS & LUGS FOR PV GROUNDING SOLAR ROOF QUICKBOLT _z SPAN -6FT. TO MEET ASCE 7-10 WITH WIND n SPEED AT 110 MPH /ZONE 1 (TYPICAL) —I F.'�' U Q 3 v TORCHDOWN COMP ROOFf,.� .. 2/12 (10-) ROOF PITCH - s CD - 2� - o - PV MODULE Itrn J 3� 2X4 DF TRUSS w @ 24" O.C. U SEE MOUNTING DETAIL Z IRONRIDGE XR10 RAIL w PV MODULE —\ & IRONRIDGE FLASHFOOT Q (n w o w m a ° u TIRONRIDGE 3" to 6" --FOOT RAIL Q z o OF � O � w a U 0 FRAMING CROSS SECTION = \ COMPRESSION WASHER 2x4 DF TRUSS \ � @24" O.C. 5/16" X 3" LAG BOLT / SCALE: N.T.S. mw ay. JHUALDA Dore 10.28.16 cQ G SHEErnTLe 160° AZIMUTH 2:12 (10°) PITCH \\ � eEvisious PV MODULE —\ 250° AZIMUTH 2:12 (10°) PITCH TIRONRIDGE 3" to 6" --FOOT RAIL HANGER BOLT \ COMPRESSION WASHER 2x4 DF TRUSS \ � @24" O.C. 5/16" X 3" LAG BOLT / mw ay. JHUALDA Dore 10.28.16 e 3132" = 1'-0" SHEErnTLe MIN. _ C "PER -1140 .\ Building Department WITH 5/16" WASHER P. Z5" MIN. REMY EMBEDMENT MOUNTING DETAIL FRAMING PLAN 2X4 DF TRUSS—/3' @ 24" O.C. (TYPICAL) tE;;' OR COU COMPLIANCE Rev—wed v -_ By Abby AlenciePV-3 SCALE: N.T.S. SHEET: mEl160"AZIMUTH 2:12 (10°) PITCH 250° AZIMUTH 2:12 (10°) PITCH / IN (E)125A240V MAIN SERVICE PANEL (N)INVERTER DRIVE WAY C- NO Building Department ViE D =OR COQ COM -L AM - Rev—wed ByAbby Alende GENERAL NOTES 1. 2:12 (101) ROOF PITCH 2. 2X4 DF TRUSS @ 24" O.C. 3. TORCHDOWN COMP ROOF 4. ONE STRING OF 16 MODULES 5. (16) HANWHA MODULES 6.(1)SE5000A-US SOLAREDGE 7. (16) SOLAREDGE P300 OPTIMIZERS S. IRONRIDGE XR10 RAIL 9. QUICKBOLT 10. WEEB CLAMPS & LUGS FOR PV GROUNDING KEY / COMPONENTS SYMBOL DESCRIPTION NEMA 3R JBOX SOLAREDGE P300 OPTIMIZERS 3/4" EMT CONDUIT PV MODULE LU U z LU C) 6 M o' H"N ar. JHUALDA DATE: 10.28.16 save 1/16" = 1'-0" ROOF PLAN PV -4 (E) 125A/240V MAIN SERVICE PANEL 9 NEUTRAL GRD (E)100A MAIN DISCONNECT BREAKER INVERTER OUTPUT CIRCUIT AC CURRENT _ 2-#10 THWN-2 CONDUCTORS 1-#10 THWN-2 NEUTRAL 1-#8 THWN-2 GROUND IN 1-3/4" EMT CONDUIT WIRE RUN NOT MORE THAN 10' INVERTER SOLAREDGE SE5000A-US-U 240V INVERTER AFCIPROTECTED NEUTRAL DC }� I� I� L1 L2 ACS GROUND 7 -BOX NEMA 3R INVERTER INPUT CIRCUIT DC CURRENT 24 10 TH W N-2 CONDUCTORS 1-# 8 TH W N-2 G ROUND IN 1-3/4" CONDUIT DC CURRENT TO BE IN METAL RACEWAYS WHEN PENETRATING BUILDING SURFACE WIRE RUN NOT MORE THAN 100' NOTES: 1. 16 HANWHA Q -CELLS Q.PLUS BFR -G4.1 275 275W POLYCRYSTALLINE PV MODULES & SOLAREDGE P300 POWER OPTIMIZERS. 2. PV SOURCE CIRCUIT(S) ARE TO BE SUNLIGHT -RESISTANT PV -WIRE AS PERMITTED BY CEC 690.31(B). 3. ALL DIRECT CURRENT CIRCUITS ARE TO BE INSTALLED IN METAL RACEWAY FROM THE POINT OF PENETRATION OF THE SURFACE OF THE BUILDING OR STRUCTURE TO THE MAIN SERVICE PANEL AS MANDATED BY CEC 690.31(E). 4. WEATHERPROOF J -BOX -NEMA 3. 5. INVERTER - SOLAREDGE MODEL: SE5000A-US-U DC TO AC PHOTOVOLTAIC INVERTERW/ INTERNAL GFDI AND INTEGRAL DC DISCONNECTCOMPLIANCE: UL1741, IEEE -1547. NEMA 4X 6. (E) 125A MAIN SERVICE PANEL WITH 100A MAIN DISCONNECT BREAKER. ADD ONE (1) 2 -POLE, 30A 2P BREAKER FOR (N) _ 7. ALL WORK SHALL COMPLY WITH THE 2013 CALIFORNIA ELECTRICAL CODE (C.E.C.) AND ALL OTHER LOCAL CODES AS A BY T AUTHORITY HAVING JURISDICTION. \ viii =din Department HANWHA Q -CELLS Q.PLUS BFR -G4.1 275 275W MODULES SOLAREDGE P300 OPTIMIZERS 1 STRING #1 - 16 MODULES AND OPTIMIZERS WE PV SOURCE CIRCUITS DC CURRENT - EACH 2-#10 PV -WIRE CONDUCTORS 1-#6 GROUND WIRE RUN NOT MORE THAN 15' lt J Lu U z Lu C) 6 H"N ar. JHUALDA Dore 10.28.16 ave SINGLE LINE DIAGRAM PV -5 USb6 vo Paamlua 8 -S SSLZ w w bT056 t1'J 'ONIlii3dfl� a (D 1 l 'aijvAD-lnoq DNI IiG-LS TTbOT a Q Q 0 -_ 3DN34IS32i QOOWHVW w 6b9806 # 0I-1 on' o U) n'oiiaiaos3a N O } Z [[ V Z O w �m� M �o a�Q� T Q a ^ z z O O Oa o AI) .:... CLC 0 �� > U CD E. III �'i ul Ilm n6 � � � rrr III III M ISI .. IIIIIIII O Q � . FE79 ^' ul IIIIIIIIIIIII 6 ,III. Illllli III,' W W g W W ..� 3 IIIIIIIIIIIII IM m ���., �> Z w O Q "�' J m M 'dm^,� a ,a mio y W U (nom fv ham" f � IIII w Ilnl ¢¢O 6tl' C[W> W I. III III m ..ZZ Ln�O Il.ul to p1111111 UHII ��� UNC L. IIVI IIIIIIIIIIIII II r�w Illm IIII w z I�w �� m w H Na O O O �oOz liiiii6 it ? m I� Dill IIIA" SII IIIIO Illlllilll --(DUQ it 11 IIII" " „m O w OQ O ,T an li^ �' I2 III uM MIN III , VIIIIII Ii un urc�' ul' ��' d Inml m HHQ U } M T vv� at IIII'. im 3 S O CC W I Ig dn' II W ZQ COI_ ., Iii Iii Ilii IIS � 11 IIR' iu uu Y � U U M' T„ III ..r!. Ilry uw p I liilmu hill' HUM VI 0> O O O O O 4.4KW DC (STC) 16 HANWHA SOLAR p sa Q -Cells 275W Q.Plus BFR -G4 � = u�a 275W MODULES So & D) tr 1-SOLAREDGE U_ SE5000A-US INVERTER J 16-P300 POWER OPTIMIZERS INVERTER Lu U z Lu w o Lu �E �EE ARRAY � w I 160` Azimuth O '" ID u 10` Slope 0 C G ARRAY 250` Azimuth REVISIONS 10` Slope AWN BY: JHUALDA TE: 10.28.16 S -LE SHEET TITLE: OPTIMIZER i ding Department MAP RE,.EE,�_ _v _ _R CO " NIP=.ANC- SHEET: Re --w AD e PV -7 ;ate: 11,'C9,16, UqV6 vo P-0-1-8 ­S AeAA-113 q%Z VTOS6 VD'ONI-LdDdnD < I o 61 15vo:) ls3m 'cnjvAD-lnoq DNFiJDIS TTtOT IDNIGIS]"d GOOWHVW 0 (n Cf) 6t,9806 # 01-1 ...... ........ --- ---- --- E E) 10 A!; '2' T, T 2 g, z L L .gymLAI CD 0 u A A E�5!7i►1a � i0 w in 1 7�r' rI IIIbI ml tA w f CZ f'-" 2, .2 - i a59 tt 'd m 2 mi -5 J ,III fill") z; Ll +—Lxi U \\\\\\ \\\\\\ rn o-3 TQ \\\\\ \\\ \ v �o En cc 10— IR©NRIDGE XR Rail Family XR Rail FamilyEi U The XR Rail Family offers the strength of a curved rail in three targeted sizes. Each size supports specific U design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match. - Over their lifetime, solar panels experience countless extreme weather events. Not just the worst storms in years but the worst storms in 40 years. High winds capable of v — W ripping panels froma roof, and snowfalls weighing A �� U enough to buckle a panel frame. LU XR Rails are the structural backbone preventing XRfa XRioo X111000Q o these results. They resist uplift, protect — r against buckling and safely and efficiently XR10is sizes, I. l fi Flung XR thItlma[residential XR1000- aheay heavyweight among UI--)transfer loads Into the building structure raiI degued for regionswith light or mounting rail. It suppors a range of safe, t g mik. Ibuilt to handle anI W O Their superior spanning capability ' -� y�'y -.. — -n star. It aches. 6 foo- t spawhile winded onow cndtan while also awleme climates and isnans 12feet or W p requires fewer roof attachments, remaining fight and sh economical. ma_ ng spans no to ® feet, more for commaroal applications. �/ BE reducing the number of roof2mV� 6 spanning capability - 9'spann[ng capability 12 spanning capability ti O penetrations and the amount �� _ LY Moderate lead p.tany Haavy laatl capablrty Ex oris pab{lily F clear nadized finish - clear & black anodized finish Clear ar anodized f nigh w of installation time_ A, L �� ` e Internal splices available Intemlaplcesavalbable internal aplices available bu 0 v Rail Selectiongo The following table was prepared in compliance with applicable engineering codes and standards. Values are Q based on the fallowing criteria: ASCE 7-10, Roof Zone 1, Exposure B, Roof Slope of 7 to 27 degrees and Mean Building Height of 30 ft. Visit IronAidge.com for detailed span tables and certifications. _: `\\\\yo\ p - - NO \o 11111MINEINE1111,. Force-Stabilizing Curve -100 Staged "olots generate troth r1 d lateral f=ntfl mounting hcthem 120 t None andThe read Nape of XR Rada p fy dl-Ig ed E strength both TAO XRia XR1613 XR31000 dir-louo, whileresisting the taisting. This mabe, me 160 weathe€ antl a logng., system I,f thr., 100 0 __-120 10-20 i 140 \.- .... 560 100 30 ......... o - — 160 awn BY a Compatible with Flat & Pitched Roofs Corrosion-Resistant Materials JHUALDA 100 \�\ XR Aaiis are \\\\ ohR lga offers All XR Ear,, are made of mar no- gratis �, 41 - vale 10.28.16 \\ F pFtoii. andnae of \ \optionsgio ttiti g anodized 'finish.Anodizing minum alloy, then P Ptett d ?h t60 ......... ......... ......... scAUE surface - pAvate\ mrpmhed of \� A� estmonm d1 toImo nI alsogmvang 5170 160 SHEET TITLE O\\\\ O\\ anacnmema. porcations - - a more attracts- appearance. _. so-so 160 RACKING . ilding Department — SPEC. �. yyy y� v vy yy y����y� „vim yyy yy ,y�yyy.yyyyvy,v, vyvvyyvyyyyyyyyvvvv vvv yyyyvyyy�yyy yyvvv yywvyvyyv.yyyyvyvyv�y.yyyyv_wyyyvvv__...... yyyvyvyvyvyyyy. y �� �ydo��,�wv� RE,rF v . R " " NP=HNC_ snrrT Rt -w AD � _ �_ -ole 1,'C1, : SP-4 ELSb6 vo Paamlua 8 -S SSLZ 6 J LO 1 5 V o� I sa 3 bT056 tfJ rONIlii3dflJ a `� a m rdiitl/�31f109 `JNIlii31S TTbOT - co Y 3DN34IS32i (IOOWHVW U) 6b9806 # 0I-1 Noiiaiaos3a oN o i1 � � qqyy VJ N d c o X cm cu h. 1(� UM E tf "4�r k� a u>= .- zca Q n ar`:r °° cacti it!i m° s 66 U W C � � .z ....... Pry` W _...... .. m V o ana r O n �u ,. � f✓J 6 O W _ CL rYY `1Y � mmmmm aore�a +— U En \\\ \\ En c t cc \\ IR©NRIDGE UFO Family of Components 0) "' 3 U _d \\ The UFO family of components eliminates the need for separate grounding hardware by bonding solar modules _ directly to IronRidge XR Rails. All system types that feature �J J a the UFO family—Flush Mount, Tilt Mount and Ground U Mount—are fully listed to the UL 2703 standard. LU UFO hardware forms secure electrical bonds with both the - 1-4 module and the rail, resulting in many parallel grounding ° paths throughout. the system. This leads to safer and more w o reliable installations - w D m m _ s F w I Stopper Sleeve Universal Fastening Object jUFOj du ` The Stopper Sf - the tJFb rely bonds lutes to xn O U c \ ? onto th. UFQ converting d tote Rai4s. It - mbled d I. 6-oated, and C N \\� a bonded end clamp. can fit—de w de range of module heights. G REVISIONS - ` ry Bonded Splice �\ sorthaa-dad got usaa OA , \..\ \\ � ad le co nnent n No , - trondn5g strap needee. r o � awN BY rounding LUg� JHUALDA Asinglee rmingLag Bonded Attachments. Dore. 10.28.16 t oonnacts an got e ow The bonding bolt attaches scaLE of PV m d t the and bonds th L toot to ilio groundingccnd€.dor. r rt It installed wrth the SHEET TITLE hard,ticket as the rest of the �,. system. GROUNDING SPEC. `ViEt;', C =011 COQ COMPLIANCE SHEET: Reviewed By, Al � ae S P-6 - 11,'C916, System Diagram UFO Stopper Sleeve •Grounding Lug �] Bonded Splice �— Ground Wire 4 Approved €nphase micrpinveriers can provide equipment grounding of IronRidge systems, eliminating the need for grounding Tugs and field installed equipment ground conductors (EGO). R minimum of two microinveners mounted to the same call and connected to the same Engage cable is required Refer to installation manuals for additional details. UL Certification The IronRidge Flush Mount, � Tilt Mount, and Ground Mount XR Rails .� V XR10flQ Only Systems have been listed to UL 2703 by Intertek. Group plc. UFO/Stopper r V V UL 2703 is the standard for Banded Splccm ice WA evaluating Solar mounting Grounding lugs i per Raw 1 per Rpw t per Array systems. It ensures these devices Microinverters EHphase - M260-72, M250-6fl, M215 -SQ 0250 72 will maintain strong electrical and &Power Darton - MIG240, MIG3Q0, G320, G640 mechanical connections over Optimizers [ SoiarEdge - P30Q, P32Q, P40Q P405, P600,. P7QQ P73Q an extended period of time in extreme outdoor environments. Fire Rating Class A Class A WA Modules Tested valuated Evaluated wrth over 400 Framed Modules I\ - _ \� Refer to installation manuals for a detailed list. Ca 0 liclina ���rft���