Press Alt + R to read the document text or Alt + P to download or print.
This document contains no pages.
15110122CITY OF CUPERTINO BUILDING PERMIT
BUILDINGADDRESS:
CONTRACTOR:
PERMIT NO: 15110122
10334 S TANTAU AVE CUPERTINO CA 95014 (375 08 035)
OWNER/BUILDER
OWNER'SNAME: LIANSHANETAL
DATE ISSUED: 02/22/2016
OWNER'S PHONE; 408-464-5030
PHONE NO:
LICENSED ONT A TOR'S DECLARATION
BUILDING PERMIT INFO:
License Class Lia. #
Contractor OWNE /B ih DER Date
—BLDG __ELECT -PLUMB
I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing
MECH -, RESIDENTIAL _ COMMERCIAL
with Section 7000) of Division 3 of the Business & Professions Code and that my
license is in full force and effect,
JOB DESCRIPTION:
CONSTRUCT TWO STORY RESIDENCE (3727 SQ FT); GARAGE
I hereby affirm under penalty of perjury one of the following two declarations:
(489 SQ FT); COVERED PORCH (616 SQ FT).(SUNNYVALE
1. I have and will maintain a certificate of consent to self -insure for Worker's
SANITARY)
Compensation, as provided for by Section 3700 of the Labor Code, for the
performance of the work for which this permit is issued.
2. I have and will maintain Worker's Compensation Insurance, as provided for
by Section 3700 of the Labor Code, for the performance of the work for which
this permit is issued.
Sq. Ft Floor Area:
Valuation: $660000.00
APPLICANT CERTIFICATION
certify that I have read this application and state that the above
APN Number:
Occupancy Type:
information is correct. I agree to comply with all city and county
ordinances and state laws relating to building construction, and hereby
375 08 035
authorize representatives of this city to enter upon the above mentioned
property for inspection purposes. (We) agree to save indemnify and keep
harmless the City of Cupertino against liabilities, judgments, costs, and
PERMIT EXPIRES IF WORK IS NOT STARTED
expenses which may accrue against said City in consequence of the
granting of this permit. Additionally, the applicant understands and will
WITHIN 180 DAYS OF PE CE OR
comply with all non -point source regulations per the Cupertino Municipal
180 DAYS FR CAL CTION.
Code, Section 9.18.
Is IS
Signature Date
Date: 2 2 2-- -
RE -ROOFS:
OWNER -BUILDER DECLARATION
I hereby affirm that I am exempt from the Contractor's License Law for one of the
All roofs shall be inspected prior to any roofing material being installed. If a roof is
following two reasons:
installed without first obtaining an inspection, I agree to remove all new materials for
1. 1, as owner of the property, or my employees with wages as their sole
inspection.
compensation, will do the work, and the structure is not intended or offered
for sale (Sec.7044, Business & Professions Code)
Signature of Applicant:
I, as owner of the property, am exclusively contracting with licensed
Date:
contractors to construct the project (Sec.7044, Business & Professions Code).
I hereby affirm under penalty of perjury one of the following three declarations:
ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER
L I have and will maintain a Certificate of Consent to self -insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
HAZARDOUS MATERIALS DISCLOSURE
performance of the work for which this permit is issued.
I have read the hazardous materials requirements under Chapter 6.95 of the
2. 1 have and will maintain Worker's Compensation Insurance, as provided for
California Health & Safety Code, Sections 25505, 25533, and 25534. I will
by Section 3700 of the Labor Code, for the performance of the work for which
maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the
'this permit is issued.
Health & Safety Code, Section 25532(x) should I store or handle hazardous
/ T certify that in the performance of the work for which this permit is issued, I
material. Additionally, should I use equipment or devices which emit hazardous
in to become
air contaminants as defined by the Bay Area Air Quality Management District I
shall not employ any person any manner so as subject to the
Worker's Compensation laws of California. If, after making this certificate of
will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and
the Health &Safety Code, Secti ns 25505, 25534andN.
exemption, I become subject to the Worker's Compensation provisions of the
Labor Code, I must forthwith comply with such provisions or this permit shall
Owneror,au orize a en ,
be deemed revoked.
Date: i-
�T' 4TION
APPLICANT CERTIFICATION
("1 LENDING EN Y
I certify that I have read this application and state that the above information is
I hereby affirm that there is a construction lending agency for the performance
correct. I agree to comply with all city and county ordinances and state laws
of work's for which this permit is issued (Sec. 3097, Civ C.)
relating to building construction, and hereby authorize representatives of this city
Lender's Name
to enter upon the above mentioned property for inspection purposes. (We) agree
to save indemnify and keep harmless the City of Cupertino against liabilities,
Lender's Address
judgments, costs, and expenses which may accrue against said City in
consequence of the granting of this permit. Additionally, the applicant
ARCHITECT'S DECLARATION
understands and will comply with all non -poi source regulations per the
I understand my plans shall be used as public records.
Cupertino Municipal Code, Section 9.1
Licensed
//
Professional
Signature' Date%-;)-/(
CUPERTINO I
NEW CONSTRUCTION
CONSTRUCTION PERMIT APPLICATION
COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION
10300 TORRE AVENUE • CUPERTINO, CA 95014-3255
(408) 777-3228 • FAX (408) 777-3333 - buildingQ)cupertino,org l l
F7AT)T)TTYITT I 1 AT Tr~4 A-Mn11T / TT M 11...--1
--- - -----' �, ..-...�...,,�.,,. � .�. ,
� x"_,wi�iviv i Lnrnrttcnu VtCiUINAL Yt,1tNi11�#
PR0IECT ADDRESSj ( 10 S ®
APN # -
OWNERNAME
TvL . t44eat PHONE E-MAIL
VO *v y
63
STREET ADDRESS "7
CITY, STATE, ZIP > FAX
CONTACT NAME
PHONE %%� ,ri
E-Mfi AII,
et
STREETADDRESSj/�p��»»/p CITY,S/T�ATE, 7,�P )/,� sFAaXJ
�b� / LLi✓l �4..C...te- "'Tile l C'4" 11 70 ''
❑ OWNER ❑. OWNER -BUILDER ❑ OWNER AGENT ❑ CONTRACTOR El CONTRACTOR AGENT ARCHITECT 0 ENGINEER ❑ DEVELOPER ❑ TENANT
CONTRACTOR NAME ro
LICENSE NUMBER
LICENSE TYPE
BUS. LIC #
COMPANY NAME
E-MAIL
FAX
STREET ADDRESS
CITY, STATE, ZIP
PHONE
CHITE /ENGINEER NAME
LICENSE NUMBER14
BUS. LIC #
�
yy
COMPANYNAME 3
7
E-MAIL p� /'�
'UL - o -=hYJ6 I`%s cat,
FAx 44:0'6-3 2.
STREET ADDRESS
-
TATE, ZIP
>g
CITY, S-5�
HONE -
� P 6
DESCRIPTION OF WORK q
1 v' 4-aa—de ' lq
EXISTING SE - -
PROPOSED USE CONSTR
TYPE
# STORIES
-
"—�
_
yr —1
{ei
V
USE
TYPE,
OCC.
SQ.FT.
VALUATION ($)
EXISTG - W FLOOR
.EA
1
AREA .7-40-J-1
DEMO
AREA
TOTAL
NET AREA
- 22a�-
]
i
�°`"�`�
(
�� ��t
��
BATHR001,._ -._. _.r _-.:
KITCHEN
OTHER
-
-
REMODEL AREAa.
(.
REMODEL AREAp
REMODEL AREA
-
�"C
��
�tr�
lam,, ewe
6J'M
PORCH AREA
DECK AREA
TOTAL DEECKIPORCH AREA
GARAGE AREA: DETACH
K7 lt/
C1 (�
4 fo . rACH
1
ky
#DWELLINGUNR'S:
ISASECONDUNIT ❑YES
SECONDSTO Y ❑YES
--
_
BEING ADDED?2rNo
ADDITION? IO
PRE -APPLICATION a YES IF YES, PROVIDE COPY OF
IS THE BLDG AN L] YES
RECEIVED
-
'�
TOTAL VALUATION:
PLANNINGAPPL4 E3 NO PLANNING APPROVAL LETTER
EICHLERHOME?
'1
7
✓—
5
6>
By my signature below, I certify to each of the following: I am the property owner or authorized agent to act on the property owner's behalf. I have read this
application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local
ordinances and state laws relating to b ilding construction. I authorize representatives of Cupertino to enter the above -identified property for inspection purposes.
Signature of Applicant/Agent: Date:
SUPPLEMEINFO ATION REQUIRED
��x,R�,TiTIIVGSL�
_�����PLAN'CHECKTYPE'�,�_
��„rte
courrrEx
BTJILDINLArIREvrEw
_ New SFD or Multifamily dwellings: Apply for demolition permit forOVERTHE
existing building(s). Demolition permit is required prior to issuance of building1
tx
permit for new building.
-�PLANIVING:PLAlyREVIEwT
*'
_ Commercial Bldgs: Provide a completed Hazardous Materials Disclosure
-,❑.i-AEXPI2ES$„$x
�±STi1NDARD
�uBLletivoRxs i ii
To
if any Hazardous Materials are being used as part of this project.
€
y
Copy of Planning Approval Letter or Meeting with Planning prior to
_
submittal of Building Permit application.
❑=MAJOR h
SAhTlARYBEAVER`DISTRI,CT
B1d,aApp 2011.doc revised 06/21/11
EM
ZZ
CITY OF CUPERTINO
FEF. F.STTMATC)R — RITII .DlrNC:-nIVICI"N
imlADDRESS: 10334 S Tantau Ave
FEE
DATE: 1 111 812 01 5
REVIEWED BY: Sean
APN:
BP#:
Select a Mise Bldg/Structure
or Element of a Building
*VALUATION: $660,000
*'PERMIT TYPE: Building Permit
PLAN CHECK TYPE: New Construction
PRIMARY SFD Or Duplex
USE:
2nd Unit? '; Yes No
PENTAMATION
PERMIT TYPE: 1 R3SFDW
WORK
Construct two story residence 3727 sq
ft); Garage 489 sq. ft); Covered Porch 616 sq ft).
SCOPE
F0,0ThrS
OCCUPANCY TYPE: TYPE OF FLR AREA PC FEES PC FEE ID BP FEES BP FEE ID
CONSTR. (s.f.
R-3 (Custom) II-B,111-B,IV,V-B 4,832 $3,342.57 IR3PLNCK $4,037.37 IR3INSP
I TOTALS: I 4,832
n isle -1 J>T >-it f.. PaLSf2 C{c £,.1,. 16,c, Phin Check -
F., f£E;kms
y..
Lfr Zc'f' 1�Lfc.i�;. I7 '1. --t-
0&or h 172.b.l17<SpOilier f Is'£`. hisf), ED
NOTE. This estimate does not include fee.0 due to nther l)enartmontc Ii_O_ Plan"ina Pnhlir Wnrkc Firo llivfrirf Qnhn l
Listriet, etc.). 1 nese_rees are based on the preliminary information available and are only an estimate. Contact the Dent for addn'l info.
FEE ITEMS (Fee Resolution 11-033 E '. 7/1/13,
FEE
QTY/FEE
MISC ITEMS
Plan Check Fee:
$3,342.57
Select a Mise Bldg/Structure
or Element of a Building
Suppl. PC Fee: Reg. 0 OT
0.0
hrs
$0.00
PME Plan Check:
$0.00
e
Permit Fee:
$4,037.37
Suppl. Insp. Fee: Reg. 0 OT
F0,0ThrS
$0.00
PME Unit Fee:
$0.00
PME Permit Fee:
$0.0.0
Construction Tax: IBCONST.9XR
1
# new
units
$687,10
0
E
Work Without Permit? 0 Yes (j) No
$0.00
Advanced Planning.Fee: 1PLLONGR
$676.48
Select a Non-Residential
Building or Structure 0
i
i°r r 11.3r£;rlirt�t 1s: £,:
Strong Motion Fee: IBSEISMICR
$85.80
Select an Administrative Item
Bldg Stds Commission Fee: IBCBSC
$27.00
S.I BT©YACs
$8,856.32
$0.00 'P©T ,E
$8,856.32
Revised: 10/01/2015
Csfl 01t�-a
Certmeate ot insulation
Your Home at; 10334 South Tantau Ave. Cupertino, Cit
hasbeen insulated with: fiberglass batts
which is designed for today's safety standards and tomorrows energy requirements.
This also certifies that: Johns Manville Insulation has been
professionally installed in this home to provide the following thermal performance:
Subfloor insulation R19 unfaced batts, 2397sf'
Insulation Contractor: WEST COAST INSULATION, INC
L,ic. 9732785
121 Beech Street, Redwood City, CA 94063
650/369-7111:
Skned: Date:
"R" means resistar t to neat flow. he nigher the R -value the greater the insulating.'
power. Asia your builder for the fact sheet on R -value. Keep this ce:-tiaicate with your
other valued papers. rf you ever sell this Dome, this certificate should be passed onto the buyer.
Comments:
CUPERTINO
OWNER -BUILDER DISCLOSURE FORM
COMMUNITY DEVELOPMENT DEPARTMENT - BUILDING DIVISION
10300 TORRE AVENUE • CUPERTINO, CA 95014-3255
(408) 777-3228 • FAX (408) 777-3333 • buildina(acupertino.org
Dear Property Owner(s):
An application for a building permit has been submitted in your name listing yourself as the builder of the property
improvements specified at:
SITE AD E S AP EEP
S =
o gIV�Gf . :.�-S�
OWNER NAME U _ _ ...OWN.,.
ADD. S�
DESCRIPTION OF WO i J C 12—
We are providing you with an Ownet-Builder Acknowledgment and Information Verification Form to make you aware of
your responsibilities and possible risk you may incur by having this permit issued in your name as the Owner -Builder. We
will not issue a building permit until you have read, initialed your understanding of each provision, signed, and
returned this form to us at our official address indicated. An agent of the owner cannot execute this notice unless
you, the property owner, obtain the prior approval of the permitting authority.
OWNER'S ACKNOWLEDGMENT AND VERIFICATION OF INFORMATION
(DIRECTIONS: Please read and initial each statement below to signify you understand or verify this information.)
'�41. I understand a frequent practice of unlicensed persons is to have the property owner obtain an `Owner -
Builder" building permit that erroneously implies that the property owner is providing his or her own labor and material
personally. I, as an Owner -Builder, may be held liable and subject to serious financial risk for any injuries sustained by
an unlicensed person and his or her employees while working on my property. My homeowner's insurance may not
provide coverage for those injuries. I am willfully acting as an Owner -Builder and am aware of the limits of my
insurance coverage for injuries to workers on my property.
1 2. 1 understand building permits are not required to be signed by property owners unless they are responsible for
th construction and are not hiring a licensed Contractor to assume this responsibility.
A3. 1 understand as an "Owner -Builder" I am the responsible party of record on the permit. I understand that I may
prtect myself from potential financial risk by hiring a licensed Contractor and having the permit filed in his or her
name instead of my own.
_r1q 4. 1 understand Contractors are required by law to be licensed and bonded in California and to list their license
nu bers on permits and contracts.
I5. 1 understand if I employ or otherwise engage any persons, other than California licensed Contractors, and the
totvalue of my construction is at least five hundred dollars ($500), including labor and materials, I may be
considered an "employer" under state and federal law.
44ral6. I understand if I am considered an "employer" under state and federal law, I must register with the state and
government, withhold payroll taxes, provide workers' compensation disability insurance, and contribute to
unemployment compensation for each "employee." I also understand my failure to abide by these laws may subject
me to serious financial risk.
7. I understand under California Contractors' State License Law, an Owner -Builder who builds single-family
re Idential structures cannot legally build them with the intent to offer them for sale, unless all work is performed by
licensed subcontractors and the number of structures does not exceed four within any calendar year, or all of the work
is p ormed under contract with a licensed general building Contractor.
J8. I understand as an Owner -Builder if I sell the property for which this permit is issued, I may be held liable for
a fia financial or personal injuries sustained by any subsequent owner(s) that result from any latent construction
defects in the workmanship or materials.
OwnerBuilderForm 2010.doc revised 04/14/10
7
19. 1 understand I may obtain more information regarding my obligations as an "employer" from the Internal
Revenue Service, the United States Small Business Administration, the California Department of Benefit Payments,
and the California Division of Industrial Accidents. I also understand I may contact the California Contractors' State
License Board (CSLB) at 1-800-321-CSLB (2752) or www.cslb.ca.gov for more information about licensed
contractors.
10. 1 am aware of and consent to an Owner -Builder building permit applied for in my name, and understand that I
*byall
the party legally and financially responsible for proposed construction activity at the site address listed above.
11. 1 agree that, as the party legally and financially responsible for this proposed construction activity, I will abide
applicable laws and requirements that govern Owner -Builders as well as employers.
12. 1 agree to notify the issuer of this form immediately of any additions, deletions, or changes to any of the
information -I have -provided on this form. Licensed contractors are regulated bylaws designed to protect the public. If
you contract with someone who does not have a license, the Contractors' State License Board may be unable to
assist you with any financial loss you may sustain as a. result of a complaint -Your only remedy against unlicensed
Contractors maybe in civil court. If is also important for you -to understand that if an unlicensed Contractor or
employee of that individual or firm is injured .while working on your property, you maybe held liable for damages. If
you obtain a permit. as Owner -Builder and wish to hire Contractors, you will be responsible for verifying whether or not--
those
otethose Contractors are properly licensed and the status of their workers' compensation insurance coverage.
CONSTRUCTION LENDING AGENCY
(DIRECTIONS: Please complete the following construction lending agency information.)
I hereby affirm that there is a construction lending agency for the performance of the work for which this permit is issued
(Sec 3097 Civ.)
Lender Name: Lender Address:
Before a building permit can be issued, this form must be completed and signed by the property owner and
returned to the agency responsible for issuing the permit. Note: A copy of the property owner's driver's license,
form notarization, or other verification acceptable to the city, be required to be presented when the permit is issued
to verifv the property owners sicinatule. wly I /_ J
Property Owner's Signature: Date:
------------------------------------------------------------------------------------------------------------------------------------------
(NOTE: The following Authorization Form is mquired to be completed by the property owner only when designating an
agent of the property owner to apply for a construction permit for the Owner -Builder).
AUTHORIZATION OF AGENT TO ACT ON PROPERTY OWNER'S BEHAL
Excluding the Notice to Property Owner, the execution of which I understand is my personal responsibility, I hereby
authorize the following person(s) to act as my agent(s) to apply for, sign, and file the documents necessary to obtain an
Owner -Builder Permit for my project.
Scope of Construction Project (or Description of Work):
Project Location or Address:
Name of Authorized Agent: Tel No
Address of Authorized Agent:
I declare under penalty of perjury that I am the property owner for the address listed above and I personally filled out the
above information and certify its accuracy. Note: A copy of the property owners driver's license, form notarization, or other
verification acceptable to the city may be required to be presented when the permit is issued to verify the property owner's
signature.
Property Owner's Signature:
Date:
OwnerBuilderForm 2010.doc revised 04/14/10
CUPERTINO
CONTRACTOR / SUBCONTRACTOR LIST
Building Department
City Of Cupertino
10300 Torre Avenue
Cupertino, CA 95014-3255
Telephone: 408-777-3228
Fax: 408-777-3333
JOB ADDRESS: ©3 3 ,S
PERMIT # 6- Ila 12 zOWNER'S
NAME:
PHONE # 4 Of- —4 �0 3 0
GENERAL CONTRACTOR:
BUSINESS LICENSE #
ADDRESS:
CITY/ZIPCODE:
*Our municipal code requires all businesses working in the city to have a City of Cupertino business license.
NO BUILDING FINAL OR FINAL OCCUPANCY INSPECTION(S) WILL BE SCHEDULED UNTIL THE
GENERAL CONTRACTOR AND ALL SUBCONTRACTORS HAVE OBTAINED A CITY OF CUPERTINO
BUSINESS LICENSE.
I am not using any subcontractors:
Signature Date
Please check applicable subcontractors and complete the following information:
Owner / 4`ontractor Signature
zLq
ate
SUBCONTRACTOR
BUSINESS NAME
BUSINESS LICENSE #
Cabinets & Millwork
S
3 ,? 2 -
Cement
Cement Finishing
4L#30
Electrical
����
41 /Z
Excavation
3 Z14,3 p
Fencing
Vol 6o7-
3 ZI-4 3 d
Flooring / Carpeting
a, 9�Z
Linoleum / Wood
9(f 2,
Glass / Glazing
( rL)-C f7%-0 —
2 ( -?4 1
Heating
L E �-
p b
Insulation-
-��,�.
22-697
Landscaping
VV
# 0
Lathing
a Qsl2✓i�
//3
44`93 �2-
Masonry
Masonry
1/01CV-7 `
3 �d
Painting /Wallpapertl
A'Q cern
Paving
Q,Q
Z17 30
Plastering.
3 2 (?Z
Plumbing
5411 ��
0 3
RoofingcQ
S' ���-i' c
.2 �� v
Septic Tank
/V / A
Sheet Metal�y.,
2�3 Zj
Sheet Rock�`
3 q- �2
Tile
1%. 47',
?�
Owner / 4`ontractor Signature
zLq
ate
• CALGREEN SIGNATURE DECLARATIONS I J CI op -a
HS
Project Name: (-- -
Project Address:
Project Description:
10334 S. Tantau Ave.
New Single Reside
2-1-) -17 750"
SECTION 1 - DESIGN VERIFICATION
Complete all lines of Section 1 — "Design Verification" and submit the completed checklist (Columns 1 and 2) with the
plans and building permit application to the Building Department.
The owner and design professiona! •espcnsible for c^ -!ia^ce ;,,;t" C'-!rrecn Standards have revised the plans and
certify that the items checked above are hereby incorporated into the project plans and will be implemented into the
project in accordance with the requirements set forth in the 2010 California Green Building Standards Code as
adopted by the City of Cupertino.
Owner's Si9fiature
TRACY SU
Owner's Name (Please Print)
Design Professional's Signature
Design Professional's Name (Please Print)
Signature 'aff-License Professional responsible for CalGreen compliance
H. Mike Chen
Name of License Professional responsible for CalGreen compliance (Please Print)
hmikechen@gmail.com
Email Address for License Professional responsible for CalGreen compliance
hmikechennr gmail.com
SECTION 2 — IMPLEMENTATION VERIFICATION
1/10117
Date
1/10/17
Date
1/10/17
Date
408-4468418
Phone
Complete, sign and submit the competed checklist, including column 3, together with all original signatures on Section
2 to the Building Department prior to Building Department final inspection.
I have inspected the work and have received sufficient documentation to verify and certify that the project identified
above was constructed in accordance with this Green Building Checklist and in accordance with the requirements of
the 2010 Califprnia Green Building Standards Code as adopted by the City of Cupertino.
4 1 / 1-4 1 1 -
Signature of License Professional responsible for CalGreen compliance Date
H. Mike Chen 408-4468418
Name of License Professional responsible for CalGreen compliance (Please Pdnt) Phone
hmikechen@gmail.com
Email Address for License Professional responsible for CalGreen compliance
Page 5 of 5 CalGreen-20 10. doc revised 08 27 11
CERTIFICATE OF VERIFICATION
O1
CF3R-MCH-27-H
Indoor Air Quality and Mechanical Ventilation
02
(Page 1 of 3 )
Project Name: 10334 S Tantau Ave
Enforcement Agency:
Cupertino
City of
Permit Number:
15110122
Dwelling Address: 10334 S. TANTAU AVE.
City:
Cupertino
Zip Code:
95014
Title 24, Part 6, Section 150.0(0) Ventilation for Indoor Air Quality. All dwelling units shall meet the requirements of ANSI/ASHRAE
Standard 62.2. Ventilation and Acceptable Indoor Air Quality in Low -Rise Residential Buildings. Equation and table numbering on
this form corresponds to the numbering for that information in the published ANSI/SHRAE Standard 62.2-2010.
A. Dwelling Mechanical Ventilation - General Information
O1
Dwelling unit name
10334 S Tantau Ave
02
Building Type
Single family
03
Project scope
Newly constructed building
Total Conditioned Floor Area of Dwelling Unit
3727
04
(For addition projects the conditioned floor area equals
existing area plus addition area. )
Number of bedrooms in dwelling unit
4
05
(For addition projects the,number of bed rooms-auaIsthe:
existing bedrooms plus addition bedrooms)
06
Ventilation Operation Schedule
Continuous
07
Whole -Building Ventilation Rate Calculation Method
Fan Ventilation Rate Method (4.1.1)
08
Whole Building Ventilation System Type
Standalone - Balanced
MCH -27a - Continuous Ventilation Airflow - Fan Ventilation Rate Method
B. Whole -Building Continuous Ventilation - Fan Ventilation Rate Method
O1
Required Continuous Whole -Building Ventilation Rate
75
02
Installed Continuous Whole -Building Ventilation Rate
75
C. Compliance Statement
01 Building passes continuous whole -building ventilation rate test
Registration Number: 215-N6393656A-M2700001A-M27A Registration Date/Tme: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:30:59
2013 Residential Compliance Schema Version: 2013.1.008
J
CERTIFICATE OF VERIFICATION CF3R-MCH-27-H
Indoor Air Quality and Mechanical Ventilation (Page 2 of 3 )
D. Determination of HERS Verification Compliance
All applicable sections of this document shall indicate compliance with the specified verification protocol requirements in order
for this Certificate of Verification as a whole to be determined to be in compliance.
01 1 Complies: All specified verification protocol requirements on this document are met.
Ca1CP...-RTS, Inc.
Registration Number: 215-N6393656A-M2700001A-M27A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:30:59
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION CF3R-MCH-27-H
Indoor Air Quality and Mechanical Ventilation (Page 3 of 3 )
Documentation Author's Declaration Statement
1. 1 certify that this Certificate of Verification documentation is accurate and complete.
Documentation Author Name:
M i Liu
Documentation Author Signature:
nxu a n
Company:
Date Signed:
Bay Area Energy Consultants
2017-01-19 20:31:31
Address:
CEA/ HERS Certification Identification (if applicable):
1181 Sundown Ln
San Jose / CA / 95127
City/State/Zi p:
Phone:
San Jose CA 95127
408-883-3865
Responsible Person's Declaration statement
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Verification is true and correct.
2. 1 am the certified HERS Rater who performed the verification identified and reported on this Certificate of Verification (responsible rater).
3. The installed features, materials, components, manufactured devices, or system performance diagnostic results that require HERS verification
identified on this Certificate of Verification comply with the applicable requirements in Reference Appendices RA2, RA3, and the requirements
specified on the Certificate of Compliance for the building approved by the enforcement agency.
4. The information reported on applicable sections of the Certifiraw(s) of.fnstallation (CF2R) signed and submitted by the person(s) responsible for the
construction or installation conforms to the requirementsspec*d On the Certificate(s) of Compliance (CFIR) approved by the enforcement agency.
S. I will ensure that a registered copy of this Certificate of 1 a+n Shall be posted, or made available with thebuilding permit(s) issued for the
building, and made availabigto the,enforcemeu a en f " II iph lei . I undergand that a registered copy of thi ..Cert f
2
Verification is required to be inc�ded with the documentation the buil er provides to the buil'ing owner at occupancy.
Builder Or Installer Information As Shown On The Certificate Of Installation
Company Name (Installing Subcontractor, General Contractor, or Builder/Owner):
LE HEATING & AIR CONDITIONING
Responsible Builder or Installer Name:
CSLB License:
Henry Le
HERS Provider Data Registry Information
Sample Group Number (if applicable):
Dwelling Test Status in Sample Group (if applicable)
Tested
HERS Rater Information
HERS Rater Company Name:
Bay Area Energy Consultants
Responsible Rater Name:
Minxuan Liu
Responsible Rater Signature:
�GKsYlL�LX/�L!!i
Responsible Rater Certification Number w/ this HERS Provider:
Date Signed:
CC2006550
2017-01-19 20:31:31
Digitally signed by Ca10ERTS. This digital signature is provided in order to secure the content of this registered document, and in no way implies
Registration Provider responsibility for the accuracy of the information.
Registration Number: 215-N6393656A-M2700001A-M27A Registration Date/Tme: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:30:59
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION
CF3R-MCH-20-H
Dud Leakage Diagnostic Test
(Page 1 of 3 )
Project Name: 10334 S Tantau Ave
Enforcement Agency:
Cupertino
City of
Permit Number: 15110122
Dwelling Address: 10334 S. TANTAU AVE.
City:
Cupertino
Zip Code: 95014
A. System Information
O1
Space Conditioning System Identification or Name
System 1
02
Space Conditioning System Location or Area Served
First Floor
03
Building Type from CF -1R
Single family
04
Verified Low Leakage Ducts in Conditioned Space
No, credit is not taken
04
(VLLDCS) Credit from CF1R?
Total leakage
06
Verified Low Leakage Air Handling Unit (VLLAHU) Credit
No, credit is not taken
05
from CF1R?
Heating system method
06
Duct System Compliance Category
New
09
Calculated Target Allowable Duct Leakage (cfm)
. .
MCH -20a - Completely New
B. Duct Leakage Diagnostic Test
01
Condenser Nominal Cooling Capacity (ton)
4
02
Heating Capacity (kBtu/h)
78
03
Conditioned Floor Area served by this HVAC system (ft2)
2434
04
Duct Leakage Test Condition
Test final
05
Duct Leakage Test Method
Total leakage
06
Leakage Factor
0.06
07
Air Handling Unit Airflow (AHUAirflow) Determination
Method
Heating system method
08
Measured AHUAirflow
This field or section is not applicable
09
Calculated Target Allowable Duct Leakage (cfm)
102
10
Actual dud leakage rate from leakage test measurement
(cfm)
99
11
Compliance Statement
System passes leakage test
Registration Number: 215-N6393656A-M2000002A-M20A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:22:36
2013 Residential Compliance Schema Version: 2013.1.007
CERTIFICATE OF VERIFICATION CF311-MCH-20-1-11
Duct Leakage Diagnostic Test (Page 2 of 3 )
B. Duct Leakage Diagnostic Test
12 Notes
C. Additional Requirements for Compliance
01
System was tested in its normal operation condition. No temporary taping allowed_
Outside air (OA) duct connections to the central forced air duct system shall not be sealed/taped off during duct leakage
testing. OA ducts used for Central Fan Integrated (CFI) Indoor Air Quality ventilation systems, or Central Fan Ventilation
02
Cooling Systems, that utilize dampers that open only when OA is required and automatically close when OA is not required,
may configure the OA damper to the closed position during duct leakage testing.
03
All supply and return register boots were sealed to the drywall.
04
Building cavities were not used as plenums or platform returns in lieu of ducts.
05
If cloth backed tape was used it was covered with Mastic and draw bands.
06
All connection points between the air handler and the supply and return plenums are completely sealed.
Visual Inspection at Final Construction Stage (a pplicalkiUsaff system was tested at rough -in)
After installing the interior finishingwall and Verifyin& a the above rough -in tests was completed, the following procedure must
be performed "°
For all supply and return registexl rs, verify that the-spacesbetween the r1e__-g'PistJ'i_-b'ooff arifid the interior finishing wall are
07
properly sealed.
If the house rough -in duct leakage test was conducted without an air handler installed, inspect the connection points
08
between the air handler and the supply and return plenums to verify that the connection points are properly sealed.
09
Inspect all joints to ensure that no cloth backed rubber adhesive duct tape is used.
10
Verification Status
Pass
11
Correction Notes for this table
The responsible persons signature on this compliance document affirms that all applicable requirements in this table have
been met unless otherwise noted in the Verification Status and the Corrections Notes in this table.
D. Determination of HERS Verification Compliance
All applicable sections of this document shall indicate compliance with the specified verification protocol requirements in order
for this Certificate of Verification as a whole to be determined to be in compliance.
01 1 Complies: All specified verification protoco! requirements on this document are met.
Registration Number: 215-N6393656A-M2000002A-M20A Registration Date/T-ime: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:22:36
2013 Residential Compliance Schema Version: 2013.1.007
CERTIFICATE OF VERIFICATION CF3R-MCH-20-H
Duct Leakage Diagnostic Test (Page 3 of 3 )
Documentation Author's Declaration Statement
1. 1 certify that this Certificate of Verification documentation is accurate and complete.
Documentation Author Name:
Minxuan Liu
Documentation Author Signature:
Company:
Date Signed:
Bay Area Energy Consultants
2017-01-19 20:31:31
Address:
CEA/ HERS Certification Identification (if applicable):
1181 Sundown Ln
City/State/Zip:
Phone:
San Jose CA 95127
408-883-3865
Responsible Person's Declaration statement
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Verification is true and correct.
2. 1 am the certified HERS Rater who performed the verification identified and reported on this Certificate of Verification (responsible rater).
3. The installed features, materials, components, manufactured devices, or system performance diagnostic results that require HERS verification
identified on this Certificate of Verification comply with the applicable requirements in Reference Appendices RA2, RA3, and the requirements
specified on the Certificate of Compliance for the building approved by the enforcement agency.
4. The information reported on applicable sectiori&o#'the Certificatie(s) o#tnsWlat (CF* -sighed and submitted by the person(s) responsible for the
construction or installation conforms to the requireme 11 coed i the Cert cate(s)jgf C*pliange (CF1R) approved by the enforcement agency.
S. I will ensure that a registered copy of this Cetiificate of n all be poskedor reavailab with the building permit(s) issued for the
building, and made availabi o thgenforce I1�pl e wp " I de nd that a registered copy of this Certificate of
-nidi at occupancy.
Verification is required to be with the umen tion t e builder provides tot a bui mg owner
.. , �
Builder Or Installer Information As Shown Cin he"Ce i icate Of Installation
Company Name (Installing Subcontractor, General Contractor, or Builder/Owner):
LE HEATING & AIR CONDITIONING
Responsible Builder or Installer Name:
CSLB License:
Henry Le
HERS Provider Data Registry Information
Sample Group Number (if applicable):
Dwelling Test Status in Sample Group (if applicable)
Tested
HERS Rater Information
HERS Rater Company Name:
Bay Area Energy Consultants
Responsible Rater Name:
Minxuan Liu
Responsible Rater Signature:
/�(.�ffs��lQllfili
Responsible Rater Certification Number w/ this HERS Provider:
Date Signed:
CC2006550
2017-01-19 20:31:31
Digitally signed by CaICERTS. This digital signature is provided in order to secure the content of this registered document and in no way implies
Registration Provider responsibility for the accuracy of the information.
Registration Number: 215-N6393656A-M2000002A-M20A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:22:36
2013 Residential Compliance Schema Version: 2013.1.007
CERTIFICATE OF VERIFICATION
CF3R-MCH-20-H
Duct Leakage Diagnostic Test
(Page 1 of 3 )
Project Name: 10334 S Tantau Ave
Enforcement Agency:
Cupertino
City of
Permit Number: 15110122
Dwelling Address: 10334 S. TANTAU AVE.
City:
Cupertino
Zip Code: 95014
A. System Information
01
Space Conditioning System Identification or Name
System 2
02
Space Conditioning System Location or Area Served
Second Floor
03
Building Type from CF -1R
Single family
04
Verified Low Leakage Ducts in Conditioned Space
(VLLDCS) Credit from CF1R?
No, credit is not taken
05
Verified Low Leakage Air Handling Unit (VLLAHU) Credit
from CF1R?
No, credit is not taken
06
Duct System Compliance Category
-Amem 0
New
LAWAIM AWNWA" IWKVM-
MCH-20a - Completely New
B. Duct Leakage Diagnostic Test 1
01
Condenser Nominal Cooling Capacity (ton)
3
02
Heating Capacity (kBtu/h)
58
03
Conditioned Floor Area served by this HVAC system (ft2)
1293
04
Duct Leakage Test Condition
Test final
05
Duct Leakage Test Method
Total leakage
06
Leakage Factor
0.06
07
Air Handling Unit Airflow (AHUAirflow) Determination
Method
Heating system method
08
Measured AHUAirflow
This field or section is not applicable
09
Calculated Target Allowable Duct Leakage (cfm)
76
10
Actual duct leakage rate from leakage test measurement
(cfm)
65
11 1
Compliance Statement
System passes leakage test
Registration Number: 215-N6393656A-M2000003A-M20A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:23:25
2013 Residential Compliance Schema Version: 2013.1.007
CERTIFICATE OF VERIFICATION CF3R-MCH-20-H
Duct Leakage Diagnostic Test (Page 2 of 3 )
B. Duct Leakage Diagnostic Test
12 Notes
C. Additional Requirements for Compliance
01
System was tested in its normal operation condition. No temporary taping allowed.
Outside air (OA) duct connections to the central forced air duct system shall not be sealed/taped off during duct leakage
testing. OA ducts used for Central Fan Integrated (CFI) Indoor Air Quality ventilation systems, or Central Fan Ventilation
02
Cooling Systems, that utilize dampers that open only when OA is required and automatically close when OA is not required,
may configure the OA damper to the closed position during duct leakage testing.
03
All supply and return register boots were sealed to the drywall.
04
Building cavities were not used as plenums or platform returns in lieu of ducts.
05
If cloth backed tape was used it was covered with Mastic and draw bands.
06
All connection points between the air handler and the supply and return plenums are completely sealed.
Visual Inspection at Final Construction Stage�applicabfief was d a rough -i ��
After installing the interior finishin all andrifyin -_thee move roh int as completed, the following procedure must
�
be performed � -
For all supply and return registers, verify that the spacesbetween the register boot artd the -interior finishing wall are
07
properly sealed.
If the house rough -in duct leakage test was conducted without an air handler installed, inspect the connection points
08
between the air handler and the supply and return plenums to verify that the connection points are properly sealed.
09
Inspect all joints to ensure that no cloth backed rubber adhesive duct tape is used.
10
Verification Status
Pass
11
Correction Notes for this table
The responsible persons signature on this compliance document affirms that all applicable requirements in this table have
been met unless otherwise noted in the Verification Status and the Corrections Notes in this table.
D. Determination of HERS Verification Compliance
All applicable sections of this document shall indicate compliance with the specified verification protocol requirements in order
for this Certificate of Verification as a whole to be determined to be in compliance.
1 01 1 Complies: All specified verification protocol requirements on this document are met.
Registration Number: 215-N6393656A-M2000003A-M20A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:23:25
2013 Residential Compliance Schema Version: 2013.1.007
CERTIFICATE OF VERIFICATION CF3R-MCH-20-H
Duct Leakage Diagnostic Test (Page 3 of 3 )
Documentation Author's Declaration Statement
1. 1 certify that this Certificate of Verification documentation is accurate and complete.
Documentation Author Name:
M i Liu
Documentation Author Signature:
/%�GK�lLlLX/�!.11i
nxu a n
Company:
Date Signed:
Bay Area Energy Consultants
2017-01-19 20:31:31
Address:
CEA/ HERS Certification Identification (if applicable):
1181 Sundown Ln
City/State/Zip:
Phone:
San Jose CA 95127
408-883-3865
Responsible Person's Declaration statement
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Verification is true and correct.
2. 1 am the certified HERS Rater who performed the verification identified and reported on this Certificate of Verification (responsible rater).
3. The installed features, materials, components, manufactured devices, or system performance diagnostic results that require HERS verification
identified on this Certificate of Verification comply with the applicable requirements in Reference Appendices RA2, RA3, and the requirements
specified on the Certificate of Compliance for the building approved by the enforcement agency.
4. The information reported on applicable sects , '"
p pp o�5o ie Certifica(e(s) gtti�aila r F2fo-g- et rgpkkUby the person(s) responsible for the
construction or installation conforms to the requiremerAsz1Wctnthe Ce icate(sj of Coajpliagte (CFf3approved by the enforcement agency.
5. 1 will ensure that a registered copy of this Cectific to of Oiall be posted or ri;iaeavailabre with t"ilding permit(4 issued for the
building and made available to the enforcemer a en"ll II plieWe inspecuops. Indersiand at a ieerexopy of this Certificate of
,: .
Verification is required to be included with the documentati6n t e builder provides to the building owner at occul*cy.
Builder Or Installer Information As Shown On The Ce ificate Of Installation
Company Name (installing Subcontractor, General Contractor, or Builder/Owner):
LE HEATING & AIR CONDITIONING
Responsible Builder or Installer Name:
CSLB License:
Henry Le
HERS Provider Data Registry Information
Sample Group Number (if applicable):
Dwelling Test Status in Sample Group (if applicable)
Tested
HERS Rater Information
HERS Rater Company Name:
Bay Area Energy Consultants
Responsible Rater Name:
Minxuan Liu
Responsible Rater Signature:
Responsible Rater Certification Number w/ this HERS Provider:
Date Signed:
CC2006550
2017-01-19 20:31:31
Digitally signed by CaICERTS. This digital signature is provided in order to secure the content of this registered document, and in noway implies
Registration Provider responsibility for the accuracy of the information.
Registration Number: 215-N6393656A-M2000003A-M20A Registration Date[Fime: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:23:25
2013 Residential Compliance Schema Version: 2013.1.007
CERTIFICATE OF VERIFICATION
CF3R-MCH-22-H
Space Conditioning System Fan Efficacy
(Page 1 of 3 )
Project Name: 10334 S Tantau Ave
Enforcement Agency: City of
Cupertino
Permit Number:
15110122
Dwelling Address: 10334 S. TANTAU AVE.
City: Cupertino
Zip Code:
95014
A. Ducted Cooling System Information
01
Actual Tested Watts
01
System Identification or Name
Actual Tested Airflow from MCH -23 (cfm)
System 1
02
System Location or Area Served
0.58
First Floor
03
System Installation Type
05
New
04
Nominal Cooling Capacity (tons) of Condenser
4
05
Condenser Speed Type
Single Speed
06
Cooling System Zonal Control Type
Not Zonal
07
Central Fan Integrated (CFI) Ventilation System Status
Not a CFI system
08
09
System Bypass Duct Status
Date of System Airflow Rate N asuremet�
ypau
1 ,
10
Airflow Rate Protocol utilized "N
RA3.3 procedures for air-flow,rate measurement
B. Fan Watt Measurement Apparatus and Procedure Information
Instrument Specifications are given in RA3.3.1, and system fan watt measurement apparatus information is given in
RA3.3.2.2.
01 1 Fan Watt Verification Device Used. I Portable watt meter
MCH -22a Forced Air System Fan Efficacy Measurement - Newly Installed Non -Zoned Systems or Zoned Multi -Speed
Compressor
C. Forced Air System Fan Efficacy Measurement
The procedures for System Fan Watt Verification are specified in Reference Residential Appendix RA3.3.
01
Actual Tested Watts
744
02
Actual Tested Airflow from MCH -23 (cfm)
1400
03
Required Fan Efficacy (watts/cfm)
0.58
04
Actual Fan Efficacy (watts/cfm)
0.53
05
Compliance Statement:
System fan efficacy complies
Registration Number: 215-N6393656A-M2200002A-M22A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:26:49
2013 Residential Compliance Schema Version: 0.51SDD
CERTIFICATE OF VERIFICATION CF3R-MCH-22-H
Space Conditioning System Fan Efficacy (Page 2 of 3 )
D. Additional Requirements
01
All registers were fully open during the diagnostic test.
02
System fan was set at maximum speed during the diagnostic test.
03
If fresh air duct is part of the HVAC system it was not closed during the diagnostic test.
04
Airflow rate and fan watt draw shall be simultaneous measurements when used to calculate the Fan Efficacy tested value.
05
Multi -speed compressor space cooling systems or variable speed compressor systems shall verify air flow (cfm/ton) and fan
efficacy (Watt/cfm) with system operating in cooling mode at the maximum compressor speed and the maximum air
handler fan speed.
06
Zoned cooling air distribution systems with single speed compressors shall meet both the airflow (cfm/ton) and fan efficacy
(Watt/cfm) criteria in every zonal control mode.
07
Verification Status
Pass - all applicable requirements are met
08
Correction Notes
The responsible persons signature on this compliance document,affirmsthat aliapplieabie requirements' this table have
been met unless otherwise noted in the Verification Status andthe Corrections Noes in this table.
E. Determination of HERS Verifi' n Com li nc
°.." ` .£
All applicable sections of this documerffshall indicate compliance v the specifie verif c mon protocol requirements in order
for this Certificate of Verification as a whole to be determined to be in compliance.
1 01 1 Complies: All specified verification protocol requirements on this document are met.
Registration Number: 215-N6393656A-M2200002A-M22A Registration Date[Fime: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:26:49
2013 Residential Compliance Schema Version: 0.51SDD
CERTIFICATE OF VERIFICATION CF3R-MCH-22-H
Space Conditioning System Fan Efficacy (Page 3 of 3 )
Documentation Author's Declaration Statement
1. 1 certify that this Certificate of Verification documentation is accurate and complete.
Documentation Author Name:
Minxuan Liu
Documentation Author Signature:
�GK�!l�Llrili
Company:
Date Signed:
Bay Area Energy Consultants
2017-01-19 20:31:31
Address:
CEA/ HERS Certification Identification (if applicable):
1181 Sundown Ln
City/State/Zip:
Phone:
San Jose CA 95127
408-883-3865
Responsible Person's Declaration statement
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Verification is true and correct.
2. 1 am the certified HERS Rater who performed the verification identified and reported on this Certificate of Verification (responsible rater).
3. The installed features, materials, components, manufactured devices, or system performance diagnostic results that require HERS verification
identified on this Certificate of Verification comply with the applicable requirements in Reference Appendices RA2, RA3, and the requirements
specified on the Certificate of Compliance for the building approved by the enforcement agency.
4. The information reported on applicable sectionso€the Certificate(s) flnstallabDn fCF2Rjsigned and submitted by the person(s) responsible for the
construction or installation conforms to the r quireme s3 }eci )ed > the Cer icate(s f C rpliance (MR) approved by the enforcement agency.
5. I will ensure that a registered co .of this Ce ificate of a4n fall be po#—eV6r ri �ailablee with the building permit(s) issued four the
building, and made availab 'enforcen d f ' II apph 1 i _ I de*and at a registered copy c th Ce ca
documen the occupancy.
Verification is required to be with the tion buil er prove es tot a bui mg owner at
r:
Builder Or Installer Information As Shown On The Cerei tate "Cif Installation
Company Name (Installing Subcontractor, General Contractor, or Builder/Owner):
LE HEATING & AIR CONDITIONING
Responsible Builder or Installer Name:
CSLB License:
Henry Le
HERS Provider Data Registry Information
Sample Group Number (if applicable):
Dwelling Test Status in Sample Group (if applicable)
Tested
HERS Rater Information
HERS Rater Company Name:
Bay Area Energy Consultants
Responsible Rater Name:
Minxuan Liu
Responsible Rater Signature:
Responsible Rater Certification Number w/ this HERS Provider:
Date Signed:
CC2006550
2017-01-19 20:31:31
Digitally signed by CaICERTS. This digital signature is provided in order to secure the content of this registered document and in noway implies
Registration Provider responsibility for the accuracy of the information.
Registration Number: 215-N6393656A-M2200002A-M22A Registration Date/T-ime: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:26:49
2013 Residential Compliance Schema Version: 0.51SDD
CERTIFICATE OF VERIFICATION
CF3R-MCH-22-H
Space Conditioning System Fan Efficacy
(Page 1 of 3 )
Project Name: 10334 S Tantau Ave
Enforcement Agency:
Cupertino
City of
Permit Number: 15110122
Dwelling Address: 10334 S. TANTAU AVE.
City:
Cupertino
Zip Code: 95014
A. Ducted Cooling System Information
01
System Identification or Name
System 2
02
System Location or Area Served
Second Floor
03
System Installation Type
New
04
Nominal Cooling Capacity (tons) of Condenser
3
05
Condenser Speed Type
Single Speed
06
Cooling System Zonal Control Type
Not Zonal
07
Central Fan Integrated (CFI) Ventilation System Status
Not a CFI system
08
,max
System Bypass Duct Status
CEasru)
09
Date of System Airflow Rate Measure t
�x �.
2 -01
do
10
Airflow Rate Protocol utilizedRA3.3
procedures arfl6w rate`measurement
Fan Watt Measurement Apparatus and Procedure Information
Instrument Specifications are given in RA3.3.1, and system fan watt measurement apparatus information is given in
RA3.3.2.2.
01 1 Fan Watt Verification Device Used.
Portable watt meter
MCH -22a Forced Air System Fan Efficacy Measurement - Newly Installed Non -Zoned Systems or Zoned Multi -Speed
Compressor
C. Forced Air System Fan Efficacy Measurement
The procedures for System Fan Watt Verification are specified in Reference Residential Appendix RA3.3.
01
Actual Tested Watts
627
02
Actual Tested Airflow from MCH -23 (cfm)
1100
03
Required Fan Efficacy (watts/cfm)
0.58
04
Actual Fan Efficacy (watts/cfm)
0.57
5
ro _
Compliance Statement:
System fan efficacy complies
Registration Number: 215-N6393656A-M2200003A-M22A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:27:31
2013 Residential Compliance Schema Version: 0.51SDD
CERTIFICATE OF VERIFICATION CF3R-MCH-22-H
Space Conditioning System Fan Efficacy (Page 2 of 3 )
D. Additional Requirements
01
All registers were fully open during the diagnostic test.
02
System fan was set at maximum speed during the diagnostic test.
03
If fresh air duct is part of the HVAC system it was not closed during the diagnostic test.
04
Airflow rate and fan watt draw shall be simultaneous measurements when used to calculate the Fan Efficacy tested value.
05
Multi -speed compressor space cooling systems or variable speed compressor systems shall verify air flow (cfm/ton) and fan
efficacy (Watt/cfm) with system operating in cooling mode at the maximum compressor speed and the maximum air
handler fan speed.
06
Zoned cooling air distribution systems with single speed compressors shall meet both the airflow (cfm/ton) and fan efficacy
(Watt/cfm) criteria in every zonal control mode.
07
Verification Status
Pass - all applicable requirements are met
08
Correction Notes
The responsible persons signature on this compfliance documentaffirmsthat all applisabierequirementsthis table have
been met unless otherwise noted in the Verification Status andthe Corrections Notes irf his able.
'
E. Determination of HERS Verif"rfn Compliances ---
t
All applicable sections of this documentshall indicate compliance with the specifie Verification protocol requirements in order
for this Certificate of Verification as a whole to be determined to be in compliance.
01 1 Complies: All specified verification protocol requirements on this document are met.
Registration Number: 215-N6393656A-M2200003A-M22A Registration Date/T-jme: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:27:31
2013 Residential Compliance Schema Version: 0.51SDD
CERTIFICATE OF VERIFICATION CF3R-MCH-22-H
Space Conditioning System Fan Efficacy (Page 3 of 3 )
Documentation Author's Declaration Statement
1.1 certify that this Certificate of Verification documentation is accurate and complete.
Documentation Author Name:
M i Liu
Documentation Author Signature:
/�G�fls�!!lLlri�G!!i
nxu a n
Company:
Date Signed:
Bay Area Energy Consultants
2017-01-19 20:31:31
Address:
CEA/ HERS Certification Identification (if applicable):
1181 Sundown Ln
City/State/Zip:
Phone:
San Jose CA 95127
408-883-3865
Responsible Person's Declaration statement
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Verification is true and correct.
2. 1 am the certified HERS Rater who performed the verification identified and reported on this Certificate of Verification (responsible rater).
3. The installed features, materials, components, manufactured devices, or system performance diagnostic results that require HERS verification
identified on this Certificate of Verification comply with the applicable requirements in Reference Appendices RA2, RA3, and the requirements
specified on the Certificate of Compliance for the building approved by the enforcement agency.
4. The information reported on applicable secti?ewe Certifi ant#'wbnoEtedby the person(s) responsible for the
p pp (s) I
construction or installation conforms to the rquireme , the Ce tate(s liate (C approved bythe enforcement agency.
5. I will ensure that a registered co of this Ce ificate of all be rla with tt 9 ilding permit(s) issued for the
jdnd
building, and made availablg� tf�enforcemQal. n f II pl i I fat a copy thi CerTca ofVerification
is required to beim with the d6cumentatfon t e buil er prove es to t eng owner a occu l cy.
11 r
Builder Or Installer Information As Shown On'The'Cerfificate"Of Installation
Company Name (Installing Subcontractor, General Contractor, or Builder/Owner):
LE HEATING & AIR CONDITIONING
Responsible Builder or Installer Name:
CSLB License:
Henry Le
HERS Provider Data Registry Information
Sample Group Number (if applicable):
Dwelling Test Status in Sample Group (if applicable)
Tested
HERS Rater Information
HERS Rater Company Name:
Bay Area Energy Consultants
Responsible Rater Name:
Minxuan Liu
Responsible Rater Signature:
Responsible Rater Certification Number w/ this HERS Provider:
Date Signed:
CC2006550
2017-01-19 20:31:31
Digitally signed by CaICERTS. This digital signature is provided in order to secure the content of this registered document, and in noway implies
Registration Provider responsibility for the accuracy of the information.
Registration Number: 215-N6393656A-M2200003A-M22A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:27:31
2013 Residential Compliance Schema Version: 0.51SDD
CERTIFICATE OF VERIFICATION
CF3R-MCH-23-H
Space Conditioning System Airflow Rate
(Page 1 of 4 )
Project Name: 10334 S Tantau Ave
Enforcement Agency: City of
Cupertino
Permit Number:
15110122
Dwelling Address: 10334 S. TANTAU AVE.
City: Cupertino
Zip Code:
95014
A. Ducted Cooling System Information
Instrument Specifications are given in RA3.3.1.1, and system airflow rate measurement apparatus information is given
in RA3.3.2.
01
System Identification or Name
Traditional Flow Capture Hood according to procedure in
System 1
02
System Location or Area Served
02
First Floor
03
System Installation Type
Model number of Airflow Measurement Apparatus
New
04
Nominal Cooling Capacity (tons) of Condenser
Certified by Manufacturer and listed on CEC Website at
4
05
Condenser Speed Type
Single Speed
06
Cooling System Zonal Control Type
Not Zonal
07
Central Fan Integrated (CFI) Ventilation System Status
Not a CFI system
08
System Bypass Duct Status
7ypa u
09
Date of System Airflow suret _
-01
10
Airflow Rate Protocol Utilized
RA3.3 �roce s f0� a fI4,Tat4measurement
B. Hole for the placement of a Static Pressure Probe (HSPP), and Permanently Installed Static Pressure Probe (PSPP)
in the Supply Plenum.
Procedures for installing HSPP or PSPP are specified in RA3.3.1.1.
01 Method Used to Demonstrate Compliance with the HSPP installed and labeled consistent with Figure RA3.3-1
HSPP/PSPP Requirement
C. Airflow Rate Measurement Apparatus and Procedure Information
Instrument Specifications are given in RA3.3.1.1, and system airflow rate measurement apparatus information is given
in RA3.3.2.
Airflow Rate Measurement Type used for this airflow rate
Traditional Flow Capture Hood according to procedure in
01
verification.
RA3.3.3.1.4
02
Manufacturer of Airflow Measurement Apparatus
Alnor
03
Model number of Airflow Measurement Apparatus
614-513-044
Certification Status of the Airflow Measurement Apparatus
Certified by Manufacturer and listed on CEC Website at
04
Accuracy
http://www.energy.ca.gov/title24/equipment_cert/ama_fas
/index.html
Registration Number: 215-N6393656A-M2300002A-M23A Registration Date/Tme: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:24:52
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION CF311-MCH-23-1-11
Space Conditioning System Airflow Rate (Page 2 of 4 )
MCH -23a Forced Air System Airflow Rate Measurement - Newly Installed Non -Zoned Systems or Zoned Multi -Speed
Compressor
D. Forced Air System Airflow Rate Measurement
The procedures for System Airflow Rate Verification are specified in Reference Residential Appendix RA3.3.
01
Required Minimum System Airflow Rate (cfm/ton)
350
02
Required Minimum System Airflow Target (cfm)
1400
03
Actual System Airflow Rate Measurement (cfm)
1400
04
Compliance Statement:
System airflow rate complies
E. Additional Requirements
Air filters that meet the applicable requirements of Standards Section 150.0(m)12 or 150.0(m)13 were properly installed in
01
the system during system air flow rate measurement identified on this Certificate of Verification.
The airflow rate measurement,appara used he ai t ur en tified orr#hi��e>Rtificate of
02
Verification was calibrated in accords with man ctur s ci tiond confo s th
instrumentation specificatisgiven in
A visual inspection shall confirm that bypass ducts tha deliver conditioned s ply air directly to the space conditioning
system return duct airflow are not used on newly constructed zonally controlled systems unless the Performance Certificate
03
of Compliance indicates an allowance for use of a bypass duct. When a bypass duct is accounted for on the Performance
Certificate of Compliance, the airflow rate shall conform to the specifications listed on the Certificate of Compliance.
04
All registers were fully open during the diagnostic test.
05
System fan was set at maximum speed during the diagnostic test.
06
If fresh air duct is part of the HVAC system it was not closed during the diagnostic test.
07
Airflow rate and fan watt draw shall be simultaneous measurements when used to calculate the Fan Efficacy tested value.
Multi -speed compressor space cooling systems or variable speed compressor systems shall verify air flow (cfm/ton) and fan
08
efficacy (Watt/cfm) with system operating in cooling mode at the maximum compressor speed and the maximum air
handler fan speed.
09
Verification Status:
Pass - all applicable requirements are met
10
Correction Notes:
The responsible person's signature on this compliance document affirms that all applicable requirements in this table have
been met unless otherwise noted in the Verification Status and the Corrections Notes in this table.
Registration Number: 215-N6393656A-M2300002A-M23A Registration Date/T-ime: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:24:52
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION CF3R-MCH-23-H
Space Conditioning System Airflow Rate (Page 3 of 4 )
F. Determination of HERS Verification Compliance
All applicable sections of this document shall indicate compliance with the specified verification protocol requirements in order
for this Certificate of Verification as a whole to be determined to be in compliance.
O1 I Complies: All specified verification protocol requirements on this document are met.
N%M$ 'S, I
a10ER11 nc.
r1*% Ir-
PROVIDER
Registration Number: 215-N6393656A-M2300002A-M23A Registration Date/l-ime: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:24:52
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION CF3R-MCH-23-H
Space Conditioning System Airflow Rate (Page 4 of 4 )
Documentation Author's Declaration Statement
1. 1 certify that this Certificate of Verification documentation is accurate and complete.
Documentation Author Name:
Minxuan Liu
Documentation Author Signature:
i
'Alfsa`"Oracle
Company:
Date Signed:
Bay Area Energy Consultants
2017-01-19 20:31:31
Address:
CEA/ HERS Certification Identification (if applicable):
1181 Sundown Ln
CC2006550
City/State/Zip:
Phone:
San Jose CA 95127
408-883-3865
Responsible Person's Declaration statement
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Verification is true and correct.
2. 1 am the certified HERS Rater who performed the verification identified and reported on this Certificate of Verification (responsible rater).
3. The installed features, materials, components, manufactured devices, or system performance diagnostic results that require HERS verification
identified on this Certificate of Verification comply with the applicable requirements in Reference Appendices RA2, RA3, and the requirements
specified on the Certificate of Compliance for the building approved by the enforcement agency.
4. The information reported on applicable sectio 3h CertificaWs) 9tetsta11a1 jCF2 signed'at►d sYtbrnftteii=by the perspn(s) responsible for the
construction or installation conforms to the requiremerAs-specked Iii the Ceroficate(s}of Compliance (MR) approved by the enforcement agency.
5. 1 will ensure that a registered copy of this Ceirtificate of. tin iball be po4e8or madilable with the building permit(s) issued for the
building, and made avada*po the men—L-,%n 11 applid e i -, . . I dei and at a;�red copy th sCertiificate of
.-
Verification is required to be **d with the documentation the builder provides to the building owner afoccupancy.
I
«� r—
Builder Or Installer Information As Shown On The Cer fficate Of Installation
Company Name (Installing Subcontractor, General Contractor, or Builder/Owner):
LE HEATING & AIR CONDITIONING
Responsible Builder or Installer Name:
CSLB License:
Henry Le
HERS Provider Data Registry Information
Sample Group Number (if applicable):
Dwelling Test Status in Sample Group (if applicable)
Tested
HERS Rater Information
HERS Rater Company Name:
Bay Area Energy Consultants
Responsible Rater Name:
M i Liu
Responsible Rater Signature:
/%�GKsaelclL/U/!i
nxua n
Responsible Rater Certification Number w/ this HERS Provider:
Date Signed:
CC2006550
2017-01-19 20:3131
Digitally signed by CalCERTS. This digital signature is provided in order to secure the content of this registered document and in no way implies
Registration Provider responsibility for the accuracy of the information.
Registration Number: 215-N6393656A-M2300002A-M23A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:24:52
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION
CF3R-MCH-23-H
Space Conditioning System Airflow Rate
(Page 1 of 4 )
Project Name: 10334 S Tantau Ave
Enforcement Agency: City of
Cupertino
Permit Number:
15110122
Dwelling Address: 10334 S. TANTAU AVE.
City: Cupertino
Zip Code:
95014
A. Ducted Cooling System Information
Instrument Specifications are given in RA3.3.1.1, and system airflow rate measurement apparatus information is given
O1
System Identification or Name
System 2
02
System Location or Area Served
Second Floor
03
System Installation Type
New
04
Nominal Cooling Capacity (tons) of Condenser
3
05
Condenser Speed Type
Single Speed
06
Cooling System Zonal Control Type
Not Zonal
07
Central Fan Integrated (CFI) Ventilation System Status
Not a CFI system
08
09
System Bypass Duct Status
Date of System Airflow su re t
Cypasll "r
20 -01
10
tili
Airflow Rate Protocol UzedH E R
$ RA3.3 JMce es fQ a rflowTate measurement
B. Hole for the placement of a Static Pressure Probe (HSPP), and Permanently Installed Static Pressure Probe (PSPP)
in the Supply Plenum.
Procedures for installing HSPP or PSPP are specified in RA3.3.1.1.
01 I Method Used to Demonstrate Compliance with theI HSPP installed and labeled consistent with Figure RA3.3-1
HSPP/PSPP Requirement
C. Airflow Rate Measurement Apparatus and Procedure Information
Instrument Specifications are given in RA3.3.1.1, and system airflow rate measurement apparatus information is given
in RA3.3.2.
Airflow Rate Measurement Type used for this airflow rate
Traditional Flow Capture Hood according to procedure in
O1
verification.
RA3.33.1.4
02
Manufacturer of Airflow Measurement Apparatus
Alnor
03
Model number of Airflow Measurement Apparatus
614-513-044
Certification Status of the Airflow Measurement Apparatus
Certified by Manufacturer and listed on CEC Website at
04
Accuracy
http://www.energy.ca.gov/title24/equipment_cert/ama_fas
/index.html
Registration Number: 215-N6393656A-M2300003B-M23A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:26:07
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION CF3R-MCH-23-H
Space Conditioning System Airflow Rate (Page 2 of 4 )
MCH -23a Forced Air System Airflow Rate Measurement - Newly Installed Non -Zoned Systems or Zoned Multi -Speed
Compressor
D. Forced Air System Airflow Rate Measurement
The procedures for System Airflow Rate Verification are specified in Reference Residential Appendix RA3.3.
O1
Required Minimum System Airflow Rate (cfm/ton)
350
02
Required Minimum System Airflow Target (cfm)
1050
03
Actual System Airflow Rate Measurement (cfm)
1100
04
Compliance Statement:
System airflow rate complies
E. Additional Requirements
Air filters that meet the applicable requirements of Standards Section 150.0(m)12 or 150.0(m)13 were properly installed in
O1
the system during system air flow rate measurement identified on this Certificate of Verification.
The airflow rate measurement apparattfs usedp rft rrr he airfl tate, ureMentidentified on this Certificate of
02
Verification was calibrated in arcordan"ith p `a ' man ' ctur ms's "_ cifiCations and conforms to the
instrumentation specificatt4ven in Rat.
�
A visual inspection shall confirm that byp ss ductstha deliv onditidned s ply airdire to the space conditioning
system return duct airflow are not used on newly constructed zonally controlled systems unless the Performance Certificate
03
of Compliance indicates an allowance for use of a bypass duct. When a bypass duct is accounted for on the Performance
Certificate of Compliance, the airflow rate shall conform to the specifications listed on the Certificate of Compliance.
04
All registers were fully open during the diagnostic test.
05
System fan was set at maximum speed during the diagnostic test.
06
If fresh air duct is part of the HVAC system it was not closed during the diagnostic test.
07
Airflow rate and fan watt draw shall be simultaneous measurements when used to calculate the Fan Efficacy tested value.
Multi -speed compressor space cooling systems or variable speed compressor systems shall verify air flow (cfm/ton) and fan
08
efficacy (Watt/cfm) with system operating in cooling mode at the maximum compressor speed and the maximum air
handler fan speed.
09
Verification Status:
Pass - all applicable requirements are met
10
Correction Notes:
The responsible person's signature on this compliance document affirms that all applicable requirements in this table have
been met unless otherwise noted in the Verification Status and the Corrections Notes in this table.
Registration Number: 215-N63936S6A-M2300003B-M23A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:26:07
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION CF3R-MCH-23-H
Space Conditioning System Airflow Rate (Page 3 of 4 )
F. Determination of HERS Verification Compliance
All applicable sections of this document shall indicate compliance with the specified verification protocol requirements in order
for this Certificate of Verification as a whole to be determined to be in compliance.
1 01 1 Complies: All specified verification protocol requirements on this document are met.
Inc.CaICERTS,
HERS PROVI
R
Registration Number: 215-N6393656A-M2300003B-M23A Registration Date/-Fime: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:26:07
2013 Residential Compliance Schema Version: 2013.1.008
CERTIFICATE OF VERIFICATION CF3R-MCH-23-H
Space Conditioning System Airflow Rate (Page 4 of 4 )
Documentation Author's Declaration Statement
1.1 certify that this Certificate of Verification documentation is accurate and complete.
Documentation Author Name:
M i Liu
Documentation Author Signature:
/%�G/Y�l6lLX/li
nxu a n
Company:
Date Signed:
Bay Area Energy Consultants
2017-01-19 20:31:31
Address:
CEA/ HERS Certification Identification (if applicable):
1181 Sundown Ln
CC2006550
City/State/Zi p:
Phone:
San Jose CA 95127
408-883-3865
Responsible Person's Declaration statement
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Verification is true and correct.
2. 1 am the certified HERS Rater who performed the verification identified and reported on this Certificate of Verification (responsible rater).
3. The installed features, materials, components, manufactured devices, or system performance diagnostic results that require HERS verification
identified on this Certificate of Verification comply with the applicable requirements in Reference Appendices RA2, RA3, and the requirements
specified on the Certificate of Compliance for the building approved by the enforcement agency.
4. The information reported on applicable sectioe Certifica#(s) 3,Wsi1gae&ani;[subrnitted the person(s) responsible for the
construction or installation conforms to the c uirements eci(ed sn the Cei cate(skpf Compliance (CF1R) approved by the enforcement agency.
5. 1 will ensure that a registered copy, of this Certificate of tlpn f all be po533ed or ra��e�jrailable with the building permit(s) issued for the
building and made avails ; tienforce'' a f II pl le ir)�sp can I ndei�tand that a registered copy of this Certificate of
r..
Verification is required to be with the ocumen tion t e builder provides to the building owner at occupancy.
Builder Or Installer Information As Shown On The Certificate"Of Installation
Company Name (Installing Subcontractor, General Contractor, or Builder/Owner):
LE HEATING & AIR CONDITIONING
Responsible Builder or Installer Name:
CSLB License:
Henry Le
HERS Provider Data Registry Information
Sample Group Number (if applicable):
Dwelling Test Status in Sample Group (if applicable)
Tested
HERS Rater Information
HERS Rater Company Name:
Bay Area Energy Consultants
Responsible Rater Name:
Minxuan Liu
Responsible Rater Signature:
Responsible Rater Certification Number w/ this HERS Provider:
Date Signed:
CC2006550
2017-01-19 20:31:31
Digitally signed by CalCERTS. This digital signature is provided in order to secure the content of this registered document and in no way implies
Registration Provider responsibility for the accuracy of the information.
Registration Number: 215-N6393656A-M2300003B-M23A Registration Date/Time: 2017-01-19 20:31:31 HERS Provider: CaICERTS
CA Building Energy Efficiency Standards Report Version: 2013 Rev 1.008 Report Generated: 2017-01-19 20:26:07
2013 Residential Compliance Schema Version: 2013.1.008
L
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
SINGLE HOUSE
10334 S. TANTAU AVE.
CUPERTINO, CA 95014
Project Designer:
OFFICE COPY
Report Prepared by:
PERFECT DESIGN & DEVELOPMENT, INC.
r Buidng DcDa"t "O"t
FES
G()r. PL1AN(;E
�1AlED FUK GUJr G
RevOwed Sy
1
SUBMITTAL
#1
Job Number:
R1 5-4918
Date:
11/13/2015
RECEIVED
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards.
This program developed by EnergySoft. LLC —www.energysoft.com.
Ener Pro 6.7 by Ener Soft User Number 1919 ID: R15-4918
TABLE OF CONTENTS I
Cover Page
Table of Contents
Form CF -1 R -PRF -01-E Certificate of Compliance
Form RMS -1 Residential Measures Summary
Form MF -1 R Mandatory Measures Summary
HVAC System Heating and Cooling Loads Summary
Room Load Summary
Room Heating Peak Loads
Room Cooling Peak Loads
EnergyPro 6.7 by EnergySoft Job Number: ID: R15-4918 User Number: 1919
1
2
3
12
13
17
19
21
23
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: SINGLE HOUSE Calculation Date/Time: 10:44, Fri, Nov 13, 2015
Calculation Description: Title 24 Analysis
Input File Name: R15-4918.xml
CF1 R -PRF -01
Page 1 of 9
GENERAL INFORMATION
ENERGY USE SUMMARY
01
Project Name SINGLE HOUSE
04
05
02
Calculation Description Title 24 Analysis
08
Energy Use (kTDV/ftZ-yr)
03
Project Location 10334 S. TANTAU AVE.
Compliance Margin
Percent Improvement
04
City CUPERTINO
05
Standards Version Compliance 2015
06
Zip Code 95014
07
Compliance Manager Version BEMCmpMgr 2013-4 (744)
08
Climate Zone CZ4
09
Software Version EnergyPro 6.6
10
Building Type Single Family
11
Front Orientation (deg/Cardinal) 90
12
Project Scope Newly Constructed
13
Number of Dwelling Units 1
14
Total Cond. Floor Area (ft) 3727
15
Number of Zones 2
16
Slab Area (ft) 0
17
Number of Stories 2
18
Addition Cond. Floor Area N/A
19
Natural Gas Available Yes
20
Addition Slab Area (ft) N/A
21
Glazing Percentage (%) 20.3%
COMPLIANCE RESULTS
01 Building Complies with Computer Performance
02 This building incorporates features that require field testing and/or verification by a certified HERS rater under the supervision of a CEC-approved HERS provider.
03 This building incorporates one or more Special Features shown below
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-1310:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
ENERGY USE SUMMARY
04
05
06
07
08
Energy Use (kTDV/ftZ-yr)
Standard Design
Proposed Design
Compliance Margin
Percent Improvement
Space Heating
14.95
12.69
2.26
15.1%
Space Cooling
7.79
12.88
-5.09
-65.3%
IAQ Ventilation
0.93
0.93
0.00
0.0%
Water Heating
8.14
5.10
3.04
37.3/°
Photovoltaic Offset
----
0.00
0.00
----
Compliance Energy Total
31.81
31.60
0.21
0.7%
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-1310:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
r
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1R-PRF-01
Project Name: SINGLE HOUSE Calculation Date/Time: 10:44, Fri, Nov 13, 2015 Page 2 of 9
Calculation Description: Title 24 Analysis Input File Name: R15-4918.xml
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
• Ducts with high level of insulation
• Cathedral Ceiling
• Ceiling has high level of insulation
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications:
• IAQ mechanical ventilation
Cooling System Verifications:
• Minimum Airflow
• Verified EER
• Refrigerant Charge
• Fan Efficacy Watts/CFM
HVAC Distribution System Verifications:
• Duct Sealing
Domestic Hot Water System Verifications:
• --None --
ENERGY DESIGN RATING
This is the sum of the annual TDV energy consumption for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components not regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an
on-site renewable energy system.
02
Reference Energy Use Energy Design Rating
Margin
Percent Improvement
Total Energy (kTDV/f2-yr)*
72.56 72.35
0.21
0.3%
* includes calculated Appliances and Miscellaneous Energy Use (AMEU)
BUILDING - FEATURES INFORMATION
01
02
03
04
05
06
07
Project Name
Conditioned Floor Area (ft2)
Number of Dwelling
Units
Number of Bedrooms
Number of Zones
Number of Ventilation
Cooling Systems
Number of Water
Heating Systems
SINGLE HOUSE
3727
1
4
2
0
1
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-13 10:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: SINGLE HOUSE
Calculation Description: Title 24 Analysis
Calculation Date/Time: 10:44, Fri, Nov 13, 2015
Input File Name: R15-4918.xml
CF1R-PRF-01
Page 3 of 9
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
HVAC System Name
Zone Floor Area
(ft)
Avg. Ceiling
Height
Water Heating System 1
Water Heating System 2
1ST FLOOR PLAN
Conditioned
1ST FLOOR AREA1
2434
9
DHW Sys 1
Gross Area (ft)
2ND FLOOR PLAN
Conditioned
2ND FLOOR AREA2
1293
9
DHW Sys 1
Back
OPAQUE SURFACES
01
02
03
04
05
06
01
02
03
04
05
06
07
08
Name
Zone
Construction
Azimuth
Orientation
Gross Area (ft)
Window & Door Area (ftZ)
Tilt (deg)
WEST WALL
1ST FLOOR PLAN
R-21 Wall
270
Back
529.3
225
90
EAST WALL
1ST FLOOR PLAN
R-21 Wall
90
Front
547.6
141.4
90
NORTH WALL
1ST FLOOR PLAN
R-21 Wall
0
Right
573.5
91.5
90
SOUTH WALL
1ST FLOOR PLAN
R-21 Wall
180
Left
606.8
95
90
R-38 Roof 3
1 ST FLOOR PLAN
R-38 Roof Attic
1324
Raised Floor 2
1 ST FLOOR PLAN
R-19 Floor W/ Crawlspace
2434
WEST WALL 2
2ND FLOOR PLAN
R-21 Wall
270
Back
342
62.1
90
EAST WALL 2
2ND FLOOR PLAN
R-21 Wall
90
Front
342
49.6
90
NORTH WALL 2
2ND FLOOR PLAN
R-21 Wall
0
Right
352
21.2
90
SOUTH WALL 2
2ND FLOOR PLAN
R-21 Wall
180
Left
352
35.4
90
R-38 Roof 4
2ND FLOOR PLAN
R-38 Roof Attic
1275
Raised Floor
2ND FLOOR PLAN
R-19 Floor W/O Crawlspacel
201
OPAQUE SURFACES — Cathedral Ceilings
01
02
03
04
05
06
07
08
09
10
11
Name
Zone
Type
Orientatio
n
Area (ft)
Skylight Area
(ft2)
Roof Rise
(x in 12)
Roof
Pitch
Roof Tilt
(deg)
Roof
Reflectance
Roof
Emittance
Framing
Factor
R-38 Roof
1ST FLOOR PLAN
R-38 Roof Attic1
Right
18.1
18
4
0.33
18.43
0.1
0.85
0.07
R-38 Roof 2
2ND FLOOR PLAN
R-38 Roof Atticl
Right
1 18.1
18
4
0.33
1 18.43
0.1
0.85
0.07
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-13 10:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: SINGLE HOUSE
Calculation Description: Title 24 Analysis
Calculation Date/Time: 10:44, Fri, Nov 13, 2015
Input File Name: R15-4918.xmi
CF1 R -PRF -01
Page 4 of 9
ATTIC
01
02
03
04
05
06
07
08
Name
Construction
Type
Roof Rise
Roof Reflectance
Roof Emittance
Radiant Barrier
Cool Roof
Attic 1ST FLOOR PLAN
Attic Roof1ST FLOOR PLAN
Ventilated
4
0.1
0.85
Yes
No
Attic 2ND FLOOR PLAN
Attic Roof2ND FLOOR PLAN
Ventilated
4
0.1
0.85
Yes
No
WINDOWS
01
02
03
04 05 06
07
08
09
10
Name
Type
Surface (Orientation -Azimuth)
Multipli
Width (ft) Height (ft) er
Area
(ft)
1.1 -factor
SHGC
Exterior Shading
WINDOWS
Window
WEST WALL (Back -270)
---- ---- 1
225.0
0.30
0.32
Insect Screen (default)
WINDOWS 2
Window
EAST WALL (Front -90)
---- ---- 1
141.4
0.30
0.32
Insect Screen (default)
WINDOWS 3
Window
NORTH WALL (Right -0)
---- ---- 1
91.5
0.30
0.32
Insect Screen (default)
WINDOWS 4
Window
SOUTH WALL (Left -180)
---- ---- 1
95.0
0.30
0.32
Insect Screen (default)
Skylight
Skylight
R-38 Roof (Right -0)
1
18.0
0.51
0.26
WINDOWS 5
Window
WEST WALL 2 (Back -270)
---- ---- 1
62.1
0.30
0.32
Insect Screen (default)
WINDOWS 6
Window
EAST WALL 2 (Front -90)
--- ---- 1
49.6
0.30 1
0.32
Insect Screen (default)
WINDOWS 7
Window
NORTH WALL 2 (Right -0)
---- ---- 1
21.2
0.30
0.32
Insect Screen (default)
WINDOWS 8
Window
SOUTH WALL 2 (Left -180)
---- ---- 1
35.4
0.30
0.32
Insect Screen (default)
Skylight 2
Skylight
R-38 Roof 2 (Right -0)
1
18.0
0.51
0.26
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-1310:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: SINGLE HOUSE Calculation Date/Time: 10:44, Fri, Nov 13, 2015
Calculation Description: Title 24 Analysis
Input File Name: R15-4918.xml
CF1 R -PRF -01
Page 5 of 9
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
Total Cavity
Winter Design
Construction Name
Surface Type
Construction Type
Framing
R -value
U -value
Assembly Layers
• Cavity/ Frame: no insul. / 2x4 Top Chrd
• Roof Deck: Wood Siding/sheathing/decking
2x4 Top Chord of Roof Truss @ 24
Tile Gap: present
Attic Roof1 ST FLOOR PLAN
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.400
Roofing: 10 PSF (RoofTile)
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/ Frame: R-9.1 /2x4
R-38 Roof Attic
attic)
Wood Framed Ceiling
2x4 @ 24 in. O.C.
R 38
0.025
Over Floor Joists: R-28.9 insul.
• Inside Finish: Gypsum Board
• Cavity / Frame: R-38 / 2x4
• Roof Deck: Wood Siding/sheathing/decking
• Tile Gap: present
R-38 Roof Attic
Cathedral Ceilings
Wood Framed Ceiling
2x4 @ 24 in. O.C.
R 38
0.034
Roofing: 10 PSF (RoofTile)
• Inside Finish: Gypsum Board
• Cavity / Frame: R-21 / 2x6
• Exterior Finish: Wood
R-21 Wall
Exterior Walls
Wood Framed Wall
2x6 @ 16 in. O.C.
R 21
0.066
Siding/sheathing/decking
• Floor Surface: Carpeted
Floors Over
Floor Deck: Wood Siding/sheathing/decking
R-19 Floor W/ Crawlspace
Crawlspace
Wood Framed Floor
2x6 @ 16 in. O.C.
R 19
0.049
Cavity/Frame: R-19 /2x6
• Cavity/ Frame: no insul. / 2x4 Top Chrd
• Roof Deck: Wood Siding/sheathing/decking
2x4 Top Chord of Roof Truss @ 24
Tile Gap: present
Attic Roof2ND FLOOR PLAN
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.400
Roofing: 10 PSF (RoofTile)
• Floor Surface: Carpeted
• Floor Deck: Wood Siding/sheathing/decking
• Cavity / Frame: R-19 / 2x6
R-19 Floor W/O Crawlspace
Interior Floors
Wood Framed Floor
2x6 @ 16 in. O.C.
R 19
0.048
Ceiling Below Finish: Gypsum Board
• Floor Surface: Carpeted
• Floor Deck: Wood Siding/sheathing/decking
R-19 Floor W/O Crawlspace1 1
Exterior Floors IWood
Framed Floor
2x6 @ 16 in. O.C.
R 19
0.050
Cavity/Frame: R -19/2x6
BUILDING ENVELOPE - HERS VERIFICATION
01 02 03 04
Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage CFM50
Not Required Not Required Not Required ---
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-13 10:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: SINGLE HOUSE
Calculation Description: Title 24 Analysis
Calculation Date/Time: 10:44, Fri, Nov 13, 2015
Input File Name: R15-4918.xml
C F1 R -PRF -01
Page 6 of 9
WATER HEATING SYSTEMS
01 02 03 04 05 06
Name System Type Distribution Type Water Heater Number of Heaters Solar Fraction (%)
DHW Sys 1 - 1/1 DHW Standard DHW Heater 1 1 .0%
WATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation
R -value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Small Instantaneous
0.5
0.95
199900-Btu/hr
0
0.038
WATER HEATING - HERS VERIFICATION
01
02
03
04
05
06
07
Name
Pipe Insulation
Parallel Piping
Compact Distribution
Point -of Use
Recirculation
Control
Central DHW
Distribution
DHW Sys 1 - 1/1
---
---
Air Distribution System 1
2ND FLOOR AREA2
Other Heating and Cooling
System
Heating Component 2
SPACE CONDITIONING SYSTEMS
01
02
03
04
05
06
SC Sys Name
System Type
Heating Unit Name
Cooling Unit Name
Fan Name
Distribution Name
IST FLOOR AREA1
Other Heating and Cooling
System
Heating Component 1
Cooling Component 1
HVAC Fan 1
Air Distribution System 1
2ND FLOOR AREA2
Other Heating and Cooling
System
Heating Component 2
Cooling Component 2
HVAC Fan 2
Air Distribution System 2
HVAC - HEATING UNIT TYPES
01
02
03
Name
Type
Efficiency
Heating Component 1
CntrlFurnace - Fuel -fired central furnace
80 AFUE
Heating Component 2
CntrlFurnace - Fuel -fired central furnace
80 AFUE
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-13 10:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: SINGLE HOUSE Calculation Date/Time: 10:44, Fri, Nov 13, 2015
Calculation Description: Title 24 Analysis
Input File Name: R15-4918.xml
CF1 R -PRF -01
Page 7 of 9
HVAC - COOLING UNIT TYPES
01
02
03 04
05
06
07
Name
Verified Airflow
Efficiency
Verified EER
Multi -speed
Verified Refrigerant
Charge
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond
12.2
14
Not Zonal
Single Speed
Cooling Component
Attic
None
Air Distribution System
2 -hers -dist
Not Required
Not Required
Not Required
1 -hers -cool
Cooling Component 2
SplitAirCond
12.2
14
Not Zonal
Single Speed
Cooling Component
1 -hers -cool
HVAC COOLING - HERS VERIFICATION
01
02
03
04
05
06
Name
Verified Airflow
Airflow Target
Verified EER
Verified SEER
Verified Refrigerant
Charge
Cooling Component 1 -hers -cool
Required
350
Required
Not Required
Required
Cooling Component 2 -hers -cool
Required
350
Required
Not Required
Required
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
05
06
07
Name
Type
Duct Leakage
Insulation R -value
Duct Location
Bypass Duct
HERS Verification
Air Distribution System 1
DuctsAttic
Sealed and tested
8
Attic
None
Air Distribution System
1 -hers -dist
Air Distribution System 2
DuctsAttic
Sealed and tested
8
Attic
None
Air Distribution System
2 -hers -dist
HVAC DISTRIBUTION - HERS VERIFICATION
01
02
03
04
05
06
07
08
Name
Duct Leakage
Verification
Duct Leakage
Target (%)
Verified Duct
Location
Verified Duct
Design
Buried
Ducts
Deeply Buried
Ducts
Low -leakage
Air Handler
Air Distribution System 1 -hers -dist
Required
6.0
Not Required
Not Required
Not Required
Not Required
---
Air Distribution System 2 -hers -dist
Required
6.0
Not Required
Not Required
Not Required
Not Required
HVAC -FAN SYSTEMS
01
02
03
04
Name
Type
Fan Power (Watts/CFM)
HERS Verification
HVAC Fan 1
Single Speed PSC Furnace Fan
0.58
HVAC Fan 1 -hers -fan
HVAC Fan 2
Single Speed PSC Furnace Fan
0.58
HVAC Fan 2 -hers -fan
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-13 10:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: SINGLE HOUSE Calculation Date/Time: 10:44, Fri, Nov 13, 2015
Calculation Description: Title 24 Analysis
Input File Name: R15-4918.xml
CF1 R -PRF -01
Page 8 of 9
HVAC FAN SYSTEMS - HERS VERIFICATION
01
02
01
02
03
Name
Verified Fan Watt Draw
Required Fan Efficiency (Watts/CFM)
HVAC Fan 1 -hers -fan
Required
0.58
HVAC Fan 2 -hers -fan
Required
0.58
IAQ (Indoor Air Quality) FANS
01
02
03
04
05
06
Dwelling Unit
IAQ CFM
IAQ Watts/CFM
IAQ Fan Type
IAQ Recovery
Effectiveness(%)
HERS Verification
SFam IAQVentRpt
74.77
0.25
Default
0
Required
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-13 10:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: SINGLE HOUSE Calculation Date/Time: 10:44, Fri, Nov 13, 2015
Calculation Description: Title 24 Analysis Input File Name: R15-4918.xml
IL
CF1 R -PRF -01
Page 9 of 9
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature: ("
Raymond Zhong
Company:
Signature Date:
Perfect Design
2015-11-13 10:49:20
Address:
CEA/HERS Certification Identification (If applicable):
2416 W. Valley Blvd.
City/State/Zip:
Phone:
Alhambra, CA 91803
626-289-8808
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
Responsible Designer Name:
Responsible Designer Signature:
1
Raymond Zhong
Company:
Date Signed:
Perfect Design
2015-11-13 10:49:20
Address:
License:
2416 W. Valley Blvd.
M-27635
City/State/Zip:
Phone:
Alhambra, CA 91803
626-289-8808
Digitally signed by Ca10ERTS. This digital signature is provided in order to secure the content of this registered document and in noway implies Registration Provider responsibility for the accuracy of the
information.
Registration Number: 215-N6393656A-000000000-0000 Registration Date/Time: 2015-11-13 10:49:20 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-08252015-744 Report Generated at: 2015-11-13 10:45:27
RESIDENTIAL MEASURES SUMMARY
RMS -1
Project Name
SINGLE HOUSE
Building Type 10 Single Family ❑ Addition Alone
❑ Multi Family ❑ Existing+Addition/Alteration 11111312015
Date
Project Address
10334 S. TANTAU AVE. CUPERTINO
California Energy Climate Zone
CA Climate Zone 04
Total Cond. Floor Area
3,727
Addition
n/a
# of Units
1
INSULATION
Construction Type
Area
Cavity (ft) Special Features Status
Roof Wood Framed Attic R 38 2,599 New
Wall Wood Framed R 21 2,924 New
Floor Wood Framed w/Crawl Space R 19 2,434 New
Demising Wood Framed w/o Crawl Space R 19 1,293 New
FENESTRATION I Total Area: 757 Glazing Percentage: 20-3%1 New/Altered Average U -Factor: 0.31
Orientation Area(ft2) U -Fac SHGC Overhang Sidefins Exterior Shades Status
Skylight 18.0 0.510
0.26 none none None New
Rear (1/0 287.1 0.300
0.32 none none Bug Screen New
Front (E) 191.0 0.300
0.32 none none Bug Screen New
Right (N) 112.7 0.300
0.32 none none Bug Screen New
Left (S) 130.4 0.300
0.32 none none Bug Screen New
Skylight 18.0 0.510
0.26 none none None New
HVAC SYSTEMS
Qty. Heating Min. Eff
Cooling Min. Eff Thermostat Status
1 Central Furnace 80% AFUE
Split Air Conditioner 14.0 SEER Setback New
1 Central Furnace 80% AFUE
Split Air Conditioner 14.0 SEER Setback New
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R -Value Status
1ST FLOOR AREA Ducted
Ducted Attic 8.0 New
2ND FLOOR AREA Ducted
Ducted Attic 8.0 New
WATER HEATING
Qty. Type Gallons Min. Eff Distribution Status
1 Small Instantaneous Gas 1
0.95 Standard New
Ener Pro 6.7 by Ener Soft User Number: 1919
RunCode: 2015-11-13T10:54:33 ID. R15-4918 Pae 12 of 24
2013 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the
In Nnnra nnnrnnrh iiced Frcentinns mnv nnnly Review the resnective code .rection for more information.
Building Envelope Measures:
§ 110.6(a)1:
Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
§I 10.6(a)5:
Coefficient (SHGC), and infiltration that meets therequirements of §10-111 a).
§ 110.7:
Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed.
§ 110.8(a):
Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R.
§ 110.8(i):
The thermal emittance and aged solar reflectance values of the cool roofing material meets the requirements of § 110.8(i) when the
installation of a cool roof is specified on the CF I R.
§ 110.80):
A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CFI R.
Minimum R-30 insulation in wood -frame ceiling; or the weighted average U -factor shall not exceed 0.031. Minimum R-19 in a
§ 150.0(a):
rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The
attic access shall be gasketed to prevent air leakage.
§ 150.0(b):
Loose fill insulation shall conform with manufacturer's installed design labeled R -value.
§150.0(c):
Minimum R-13 insulation in 2x4 inch wood framing wall or have a U -factor of 0.102 or less (R-19 in 2x6 or 0.074 maximum U -
factor).
§ 150.0(d):
Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U -factor.
In Climate Zones 14 and 16 a Class II vapor retarder shall be installed on the conditioned space side of all insulation in all exterior
§150.0(g)l:
walls, vented attics and unvented attics with air -permeable insulation.
In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class 1 or Class Il
§ 150.0(g)2:
vapor retarder.
In a building having a controlled ventilation crawl space, a Class I or Class lI vapor retarder shall be placed over the earth floor of
§ 150.0(g)3:
the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section
150.0(d).
§150.0(1):
Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%;
have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration:
and when installed as part of a heated slab floor meets the requirements of § 110.8
150.0
§ (q)'
Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U-
factor of 0.58; or the weighted averse U -factor of all fenestration shall not exceed 0.58.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
§ 150.0(e) IA:
Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150.0(e)IB:
Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a readily accessible, operable, and tight -fitting damper or a combustion -air control device.
§150.0(e)IC:
Masonry or factory -built fireplaces have a flue damper with a readily accessible control.
§ 150.0(e)2:
Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside
of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§ 110.0-§ 110.3:
HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission.
§ 110.3(c)5:
Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation
valve, and recirculation loop connection requirements of § 110.3(c)5.
Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appl i-
§ 110.5:
ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool
and spa heaters.
§ 150.0(h)l:
Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified
in §150.0(h)2.
§ 150.0(h)3A:
Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any
dryer vent.
§ 150.0(i):
Heating systems are equipped with thermostats that meet the setback requirements of § 110.2(c).
§ 150.00)1 A:
Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§ 150.00)]B:
Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external
insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank.
For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage
tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system
§ 150.06)2A:
regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and
all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3-
A.
§ 150.06)2B:
All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve
that allows for installation, removal, and replacement of the enclosed pipe and insulation.
2013 Low -Rise Residential Mandatory Measures Summary
§ 150.00)2C:
Pipe for cooling system lines shall be insulated as specified in § I50.06)2A. Piping insulation for steam and hydropic heating
systems or hot waters stems with pressure > 15 psig shall meet therequirements in TABLE 120.3-A.
§ 150.06)3:
Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For
§ 150.00)3A:
example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or
painted with coating that is water retardant and provides shielding from solar radiation that degrades the material.
Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I
§ 150.06)3B:
or Class II vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class II vapor
retarder.
Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3
feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the
§150.0(n)]:
space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000
Btu/hr.
§ 150.0(n)2:
Recirculating loops serving multiple dwelling units shall meet the requirements of § 110.3(c)5.
§ 150.0(n)3:
Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC)
or by a testing agency approved by the Executive Director.
Ducts and Fans Measures:
All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CMC §601.0, §602.0,
§603.0, §604.0, §605.0 and ANSI/SMACNA-006-2006 HVAC Duct Constriction Standards Metal and Flexible 3rd Edition.
Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-6.0 (or higher if required by CMC
§605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed
§150.0(m)l:
with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181B or
aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than ''A inch, the
combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums
defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying
conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms
shall not be compressed to cause reductions in the cross-sectional area of the ducts.
Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints
§150.0(m)2:
and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is
used in combination with mastic and draw bands.
§150.0(m)3-6:
Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastics, sealants, and other
requirements specified for duct construction; duct insulation R -value ratings; duct insulation thickness; and duct labeling.
§ 150.0(m)7:
All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic
dampers.
§ 150.0(m)8:
Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers
except combustion inlet and outlet air openings and elevator shaft vents.
Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not
§ 150.0(m)9:
limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum.
sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is
water retardant and provides shielding from solar radiation.
§150.0(m)10:
Flexible ducts cannot have porous inner cores.
When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be
§ 150.0(m)11:
sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference
Residential Appendix RA3.
Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§150.0(m)12:
conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of
§150.0(m)12.
Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the
placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The
§150.0(m)13:
space conditioning system must also demonstrate airflow > 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy <_ 0.58 W/CFM as confirmed by field verification and diagnostic testing, in
accordance with Reference Residential Appendix RA3.
Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode,
§ 150.0(m)l5:
an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of> 350 CFM per ton of nominal cooling
capacity, and operating at an air -handling unit fan efficacy of:5 0.58 W/CFM as confirmed by field verification and diagnostic
testing, in accordance with Reference Residential Appendix RA3.
All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of
§150.0(o):
central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the
Whole Building Ventilation.
§150.0(o)IA:
Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.
Pool and Spa Heating Systems and Equipment Measures:
Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
§ 110.4(a):
Regulations; an on-off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat
setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating.
2013 Low -Rise Residential Mandatory Measures Summary
Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction
§I 10.4(b)1:
and return lines, or built-up connections for future solar heating.
§ 110.4(b)2:
Outdoor pools or spas that have a heat pump or gas heater shall have a cover.
Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro-
§ 110.4(b)3:
grammed to run only during off-peak electric demand periods.
§ 110.5:
Natural gas pool and spa heaters shall not have a continuous burning pilot light.
§ 150.0(p):
Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements.
Lighting Measures:
§ 110.9:
All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of § 110.9.
Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with § 150.0(k) in accordance with TABLE
§ 150.0(k)] A:
150.0-A or TABLE 150.0-B, as applicable.
When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply
§150.0(k)IB:
with the applicable provisions of § 150.0(k).
The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with
§ 130.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has
§150.0(k)IC:
been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180
watts of low efficacy lighting er electrical box.
§150.0(k)ID:
Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz.
Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no
§150.0(k)IE:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § 130.0(c). Night lights do not need to
be controlled by vacancy sensors.
§150.0(k)IF:
Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable
requirements of § 150.0(k).
§ 150.0(k)2A:
High efficacy luminaires must be switched separately from low efficacy luminaires.
§ 150.0(k)2B:
Exhaust fans shall be switched separately from lighting systems.
§ 150.0(k)2C:
Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF.
§ 150.0(k)2D:
Controls and equipment are installed in accordance with manufacturer's instructions.
§ 150.0(k)2E:
No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with §150.0(k).
§ 150.0(k)2F:
Lighting controls comply with applicable requirements of § 110.9.
An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if: it functions as a dimmer
§150.0(k)2G:
according to §110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements of §130.5; and all other
requirements in §150.0(k)2.
An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of §I50.0(k) if: it
§ 150.0(k)2H:
functions as a vacancy sensor according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements
of § 130.5; and all other requirements in § 150.0(k)2.
§150.0(k)21:
A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the
functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in §150.0(k)2.
§150.0(k)3A:
A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only
§ 150.0(k)3B:
the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are
considered kitchen lighting if they are not separately switched from kitchen lighting.
§ 150.0(k)4:
Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated
cabinet.
§ 150.0(k)5:
A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom
shall be high efficacy or controlled by vacancy sensors.
§ 150.0(k)6:
Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and
controlled by vacancy sensors.
§ 150.0(k)7:
Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high
efficacy, or shall be controlled by either dimmers or vacancy sensors.
Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other
nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0
CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing
§150.0(k)8:
and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and
allow ballast maintenance and replacement without requiring cutting holes in the ceiling.
For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with § 150.0(k), the ballasts
shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9.
For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the
same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements:
i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and
§ 150.0(k)9A:
ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a
motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically
reactivates the motion sensor within 6 hours; and
iii. Controlled by one of the following methods:
2013 Low -Rise Residential Mandatory Measures Summar
a. Photocontrol not having an override or bypass switch that disables the photocwntrol; or
b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is
programmed to automatically turn the outdoor lighting OFF during daylight hours; or
c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of
an astronomical time clock in accordance with § 110.9; meets the Installation Certification requirements in § 130.4; meets the
requirements for an EMCS in § 130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and,
is programmed to automatically turn the outdoor lighting OFF during daylight hours.
For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor
lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the
§ 150.0(k)9B:
following requirements:
i. Shall comply with §150.0(k)9A; or
ii. Shall comply with the applicable requirements in § 110.9, § 130.0, § 130.2, § 130.4, §140.7 and § 141.0.
For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by § 150.0(k)9B or 150.0(k)9D
§ 150.0(k)9C:
shall comply with the applicable requirements in § 110.9, § 130.0, § 130.2, § 130.4, § 140.7 and § 141.0.
Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply
§ 150.0(k)9D:
with the applicable requirements in § 110.9, 130.0, § 130.2, § 130.4, § 140.7 and § 141.0.
Internally illuminated address signs shall comply with § 140.8; or shall consume no more than 5 watts of power as determined
§ 150.0(k)10:
according to § 130.0(c).
§ I50.0(k)11:
Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for
' ' '
nonresidential garages in § 110.9, § 130.0, 130. 1, 130.4, § 140.6, and 141.0.
In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of
§150.0(k)12A:
the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or
controlled by an occupant sensor.
In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20
percent of the floor area, permanently installed lighting in that building shall:
§ 150.0(k)12B:
i. Comply with the applicable requirements in § 110.9, § 130.0, § 130. 1, § 140.6 and § 141.0; and
ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each
space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of
ingress and egress.
Solar Ready Buildings:
Single family residences located in subdivisions with ten or more single family residences and where the application for a
§ 110.10(a)l :
tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014,
shall comply with the requirements of 110.10(b) through 110.10(e).
§ 110.10(a)2:
Low-rise multi -family buildings shall comply with the requirements of § 110.10(b) through § 110.10(d).
The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke
ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a
local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than
80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for
§ 110.10(b)l:
buildings with roof areas greater than 10,000 square feet.
For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less
than 250 square feet. For low-rise multi -family buildings the solar zone shall be located on the roof or overhang of the building or
on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the
building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area.
§ 110.10(b)2:
All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north.
§ 110.10(b)3A:
No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be
located in the solar zone.
Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice
§ 110.10(b)3B:
the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the
horizontal projection of the nearest point of the solar zone, measured in the vertical plane.
§ 110.10(b)4:
For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly
indicated on the construction documents.
The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit
§ 110.10(c):
from the solar zone to the point of interconnection with the electrical service (for single family residences the point of
interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating
system.
§ l 10.10(d):
A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(c)
shall be provided to the occupant.
§ 110.10(e)l:
The main electrical service panel shall have a minimum busbar rating of 200 amps.
The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a
§ 110.10(e)2:
future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or
main circuit location, and permanently marked as "For Future Solar Electric".
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
Project Name
SINGLE HOUSE
Date
11/13/2015
System Name
1 ST FLOOR AREA
Floor Area
2,434
ENGINEERING CHECKS
SYSTEM LOAD
Number of Systems
1
COIL
CFM
Total Room Loads 1,018
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation 0
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COOLING
PEAK COIL HTG.
PEAK
Heating System
Sensible
Latent CFM
Sensible
Output per System 95,200
24,730
1,089 523
20,605
Total Output (Btuh) 95,200
0
Output Btuh/s ft 39.1
965
976
Cooling System
0
0
Output per System 57,000
0
0 0
0
Total Output Btuh 57,000
0
1,089
0
Total Output Tons 4.8
965
976
Total Output Btuh/s ft 23.4
Total Output sgft/Ton 512.4
26,660
22,557
Air System
CFM per System
1,970
HVAC EQUIPMENT SELECTION
Airflow (cfm)
1,970
CARRIER 24ABB360/58CVA-155-22 (5 TON)
46,537 8,175
95,200
Airflow cfm/s ft
0.81
Airflow (cfm/Ton)
414.7
Outside Air (%)
0.0%
Total Adjusted System Output
(Adjusted for Peak Design conditions)
TIME OF SYSTEM PEAK
46,537 8,175 95,200
Aug 3 PM Jan 1 AM
Outside Air (cfm/sgft) 0.00
Note: values above given at ARI conditions
HEATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating
Peak
28"F
Outside Air
0 cfm
68 OF
68 °F
Heating Coil Supply Fan
1,970 cfm
n
ROOM
68 OF
COOLING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Cooling
Peak)
Outside Air Ar
0 cfm
78 / 62 OF 55 / 54 OF 551 54 OF
f fi►7 � � �
Cooling Coil Supply Fan
1,970 cfm
z
55154 OF
OOM
ROOM
EnergyPro 6.7 by EnergySoft
User Number: 1,919 RunCode: 2 01 5-11-13 71 0:54:33
/D: R15-4918 Page 17 of 24
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
Project Name
SINGLE HOUSE
Date
11/13/2015
System Name
2ND FLOOR AREA
Floor Area
1,293
ENGINEERING CHECKS
SYSTEM LOAD
Number of Systems
1
COIL
CFM
Total Room Loads 371
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation 0
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COOLING
PEAK COIL HTG.
PEAK
Heating System
Sensible
Latent CFM
Sensible
Output per System 68,000
9,082
851 241
9,532
Total Output (Btuh) 68,000
0
Output Btuh/s ft 52.6
354
452
Cooling System
0
0
Output per System 33,400
0
0 0
0
Total Output (Btuh) 33,400
0
851
0
Total Output (Tons) 2.8
3541
452
Total Output Btuh/sgft) 25.8
Total Output sgft/Ton) 464.6
1 9,791
10,436
Air System
CFM per System
1,200
HVAC EQUIPMENT SELECTION
Airflow cfm
1,200
CARRIER 24ABB336/58CVA-110-20 (3 TON)
27,506 4,556
68,000
Airflow cfm/sgft
0.93
Airflow cfm/Ton)
431.1
Outside Air (%)
0.0%
Total Adjusted System Output
(Adjusted for Peak Design conditions)
TIME OF SYSTEM PEAK
27,506 4,556 68,000
Aug 3 PM Jan 1 AM
Outside Air (cfm/sqft) 0.00
Note: values above given at ARI conditions
HEATING SYSTEM PSYCHROMETRICS (Airstream
Temperatures at Time of Heating
Peak
28 "F
Outside Air Ar
0 cfm
68 OF
68 IF
Heating Coil Supply Fan
1,200 cfm
ROOM
68 OF
COOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling
Peak)
10,
Outside Air
0 cfm
78 / 62 °F 55 / 54 °F 551 54 IF
f E►� J
I
Cooling Coil Supply Fan
1,200 cfm
I__�
55 / 54 OF
�y...._._..,_....__,,,,
41.2% ROOMff
., 1
EnergyPro 6.7 by EnergySoft User Number 1919 RunCode: 2015-11-13710:54:33
/D. R15-4918 Page 18 of 24
ROOM LOAD SUMMARY
Project Name Date
SINGLE HOUSE 11/13/2015
1 ST FLOOR AREA 2,434
ROOM LOAD SUMMARY
ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK
Zone Name I Room Name Mult. I CFM I Sensible I Latent CFM I Sensible Latent CFM I Sensible
1STFLOORPLAN I 1ST FLOOR PLAN 1 1 1,0181 24,7301 1,089 1,0181 24,7301 1,089 5231 20,605
PAGE TOTAL
TOTAL*
1, 018 24,7301
1,0891
523
20,605
1,0181 24,7301
1,0891
523
20,605]
* Total includes ventilation load for zonal systems.
Ener Pro 6.7 by Ener Solt User Number 1919 RunCode: 2015-11-13T10:54:33 ID. R15-4918 Pa e 19 of 24
ROOM LOAD SUMMARY
Project Name Date
SINGLE HOUSE 11/13/2015
System Name Floor Area
2ND FLOOR AREA 1,293
ROOM LOAD SUMMARY
ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK
Zone Name Room Name Mult. I CFM I Sensible I Latent CFM Sensible Latent CFM I Sensible
2ND FLOOR PLAN 12ND FLOOR PLAN I 1 1 3711 9,0821 851 371 9,0821 851 2411 9,532
PAGE TOTAL
TOTAL*
371 9,0821
851
241
9,532
371 9,082
851
241
9,532
' Total includes ventilation load for zonal systems.
Ener Pro 6.7 by Ener Soft User Number: 1919 RunCode: 2015-11-13710:54:33 /D. R15-4918 Page 20 of 24
ROOM HEATING PEAK LOADS
Project Name
SINGLE HOUSE
Date
11/13/2015
ROOM INFORMATION
DESIGN CONDITIONS
Room Name 1 ST FLOOR PLAN
Floor Area 2,434.0 ft2
Indoor Dry Bulb Temperature 68 OF
Time of Peak Jan 1 AM
Outdoor Dry Bulb Temperature 28 OF
Conduction
Area
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
to
Ceiling
U -Value
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
AT °F
=
=
=
_
0
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
40
Btu/hr
R-38 Roof Attic
1,324.0
0.0250
40
1,324
Double Metal Clear..
18.0
0.5100
40
367
R-21 Wall
1,704.3
0.0690
40
4,704
Double Non Metal Clear (6)
552.9
0.3000
40
6,635
R-19 Floor W/ Crawlspace
21434.0
0.0370
40
3,602
Items shown with an asterisk (") denote conduction
Infiltration: 1.00 X 1.077
Schedule Air Sensible
Fraction
through an interior surface
X 2,434 X
Area
another room
9.00 X 0.253
Height ACH
Page Total
/60] X
AT
16.632
= 3,973
TOTAL HOURLY HEAT LOSS FOR ROOM 20,605
EnergyPro 6.7 by EnergySoft User Number: 1919 RunCode: 2015-11-13T10:54:33 0 R15-4918 Page 21 of 24
t
f
ROOM HEATING PEAK LOADS
Project Name
SINGLE HOUSE
Date
11/13/2015
ROOM INFORMATION
DESIGN CONDITIONS
Room Name 2ND FLOOR PLAN
Floor Area 1,293.0 ft2
Indoor Dry Bulb Temperature 68 OF
Time of Peak Jan 1 AM
Outdoor Dry Bulb Temperature 28 OF
Conduction
Area
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
to
Ceiling
U -Value
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
AT 'F
=
=
=
_
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
40
Btu/hr
R-38 Roof Attic
1,275.0
0.0250
40
1,275
Double Metal Clear...
18.0
0.5100
40
367
R-21 Wall
1,219.7
0.0690
40
3,366
Double Non Metal Clear (6)
168.3
0.3000
40
2,020
`R-19 Floor W/O Crawlspace
1,092.0
0.0490
0
0
R-19 Floor W/O Crawlspace
201.0
0.0490
40
394
Items shown with an asterisk (') denote conduction
Infiltration:[ 1.00 X 1.077
Schedule Air Sensible
Fraction
through an interior surface
X 1,293 X
Area
another room
9.00 X 0.253
Height ACH
Page Total
/60] X
AT
7,422
__ 2,110
TOTAL HOURLY HEAT LOSS FOR ROOM 9,532
EnergyPro 6.7 by EnergySoft User Number: 1919 RunCode: 2015-11-13710:54:33 ID. R15-4918 Page 22 of 24
RESIDENTIAL ROOM COOLING LOAD SUMMARY
Project Name
Date
SINGLE HOUSE
11/13/2015
ROOM INFORMATION
DESIGN CONDITIONS
Room Name
1ST FLOOR PLAN
Outdoor Dry Bulb Temperature
88 OF
Floor Area
2,434.0 ft2
Outdoor Wet Bulb Temperature
68 OF
Indoor Dry Bulb Temperature 78 OF
Outdoor Daily Range:
30 OF
Opaque Surfaces
Orientation Area U -Factor
CLTD'
Btu/hr
R-38 Roof Attic
(N) 1,324.0 X 0.0250
X
37.0 =
1,225
R-21 Wall
(W) 304.3 X 0.0690
X
13.0 =
273
R-21 Wall
(E) 406.2 X 0.0690
X
13.0 =
364
R-21 Wall
(N) 482.0 X 0.0690
X
3.0 =
100
R-21 Wall
(S) 511.8 X 0.0690
X
6.0 =
212
R-19 Floor W/ Crawlspace,
2,434.0 X 0.0370
X
4.0 =
360
X
X
=
X
X
=
X
X
=
Page Total
2,534
Items shown with an asterisk (')
denote conduction through an interior surface to another room.
1. Cooling Load Temperature
Difference (CLTD)
Shaded
Unshaded
Fenestration
Orientation Area GLF
Area
GLF
Btu/hr
Skylight
(N) 0.0 X 10.3 +
18.0 X
46.9 =
844
WINDOWS
(W) 0.0 X 12.9 +
225.0 X
32.4 =
7,292
WINDOWS
(E) 0.0 X 12.9 +
141.4 X
32.4 =
4,583
WINDOWS
(N) 0.0 X 12.9 +
91.5 X
12.9 =
1,184
WINDOWS
(S) 0.0 X 12.9 +
95.0 X
17.8 =
1,688
X +
X
=
X +
X
=
X +
X
=
X +
X
-
Page Total
15,591
Internal Gain
Btu/hr
Occupants
7.3 Occupants X 245
Btuh/occ.=
1,789
Equipment
2,434 Floor Area X 0.50
w/sq ft
=
4,154
Infiltration: 1.077
X 0.61 X 100.39 X 10 =
663
Air Sensible
CFM ELA AT
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM
24,730
Latent Gain
Btu/hr
Occupants
7.3 Occupants X 155
Btuh/occ.
=
1,132
Infiltration: 4,830
X 0.61 X 100.39 X 0.00015 =
-43
Air Sensible
CFM ELA Aw
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM
832
Ener Pro 6.7 by Ener Soft
User Number: 1919 RunCode: 2015-11-13710:54:33 ID: R15-4918
Page 23 of 24
RESIDENTIAL ROOM COOLING LOAD SUMMARY
Project Name
Date
SINGLE HOUSE
11/13/2015
ROOM INFORMATION
DESIGN CONDITIONS
Room Name
2ND FLOOR PLAN
Outdoor Dry Bulb Temperature
88 OF
Floor Area
1,293.0 ft2
Outdoor Wet Bulb Temperature
68 OF
Indoor Dry Bulb Temperature 78 OF
I Outdoor Daily Range:
30 OF
Opaque Surfaces
Orientation Area U -Factor
CLTD'
Btu/hr
R-38 Roof Attic
(N) 1,275.0 X 0.0250 X
37.0 =
1,179
R-21 Wall
(W) 279.9 X 0.0690 X
13.0 =
251
R-21 Wall
(E) 292.4 X 0.0690 X
13.0 =
262
R-21 Wall
(N) 330.8 X 0.0690 X
3.0 =
68
R-21 Wall
(S) 316.6 X 0.0690 X
6.0 =
131
'R-19 Floor W/O Crawlspace
1,092.0 X 0.0490 X
0.0 =
0
R-19 Floor W/O Crawlspace
201.0 X 0.0490 X
4.0 =
39
X X
=
X X
=
Page Total 1
1,932
Items shown with an asterisk (')
denote conduction through an interior surface to another room.
1. Cooling Load Temperature
Difference (CLTD)
Shaded Unshaded
Fenestration
Orientation Area GLF Area
GLF
Btu/hr
Skylight
(N) 0.0 X 10.3 + 18.0
X 46.9 =
844
WINDOWS
(W) 0.0 X 12.9 + 62.1
X 32.4 =
2,013
WINDOWS
(E) 0.0 X 12.9 + 49.6
X 32.4 =
1,608
WINDOWS
(N) 0.0 X 12.9 + 21.2
X 12.9 =
274
WINDOWS
(S) 0.0 X 12.9 + 35.4
X 17.8 =
629
X +
X =
X +
X =
X +
X =
X +1
X =
Page Total
5,36
Internal Gain
Btu/hr
Occupants
3.9 Occupants X 255 Btuh/occ.
=
990
Equipment
1,293 Floor Area X 0.10 w/sgft
=
441
Infiltration: 1.077
X 0.61 X 53.33 X 10 =
352
Air Sensible
CFM ELA 4T
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM
9,082
Latent Gain
Btu/hr
Occupants
3.9 Occupants X 225 Btuh/occ.
=
874
Infiltration: 4,830
X 0.61 X 53.33 X 0.00015 =
-23
Air Sensible
CFM ELA AW
TOTAL HOURLY LATENT
HEAT GAIN FOR ROOM
555
Ener Pro 6.7 by Ener Soft
User Number. 1919 RunCode: 2015-11-13T10:54:33 ID: R15-4918
Page 24 of 24
