14020105CITY OF CUPERTINO BUILDING PERMIT
BUILDING ADDRESS: 10520 S DE ANZA BLVD
CONTRACTOR: �l'�Y}�r- S
PERMIT NO: 14020105
UNLIMITED, INC
OWNER'S NAME: HARMAN -MANAGERS INVESTMENT INC
6850 SAN IGNACIS AVE. #K
DATE ISSUED: 02/19/2014
OWNER'S PHONE: 6509415681
SAN JOSE, CA 95119
PHONE NO: (408)224-2800
❑ LICENSED CONTRACTOR'S DECLARATION
JOB DESCRIPTION: RESIDENTIAL COMMERCIAL
ALLSTATE- CHANGE SIGN TO ILLUMINATED WHITE
�,
License Class 0 H Lic. # k D ��. (Z %
CHANNEL
LETTERS
Contractor Date
I hereby affirm that I am licensed under the provisions of Chapter 9
(commencing with Section 7000) of Division 3 of the Business & Professions
Code and that my license is in full force and effect.
I hereby affirm under penalty of perjury one of the following two declarations:
I have and will maintain a certificate of consent to self -insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
performance of the work for which this permit is issued.
Sq. Ft Floor Area:
Valuation: $1000
I have and will maintain Worker's Compensation Insurance, as provided for by
APN Number: 36939017 00
Occupancy Type:
Section 3700 of the Labor Code, for the performance of the work for which this
permit is issued.
APPLICANT CERTIFICATION
I certify that I have read this application and state that the above information is
PERMIT EXPIRES IF WORK IS NOT STARTED
correct. I agree to comply with all city and county ordinances and state laws relating
WITHIN 180 DAYS OF PERMIT ISSUANCE OR
to building construction, and hereby authorize representatives of this city to enter
upon the above mentioned property for inspection purposes. (We) agree to save
180 DA LAST CALLED INSPECTION.
indemnify and keep harmless the City of Cupertino against liabilities, judgments,
costs, and expenses whicmay accrue against said City in consequence of the
2 /f`/�
Issued by: Date:
granting of this perm t. dditionally, the applicant understands and will comply
with all non -poi s rc regulations per the Cupertino Municipal Code, Section
RE -ROOFS:
All be inspected to any roofing material being installed. If a roof is
9 18.
Date '
Signature
roofs shall prior
installed without first obtaining an inspection, I agree to remove all new materials for
inspection.
ly
❑ OWNER -BUILDER DECLARATION
Signature of Applicant: Date:
I hereby affirm that I am exempt from the Contractor's License Law for one of
the following two reasons:
ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER
I, as owner of the property, or my employees with wages as their sole compensation,
will do the work, and the structure is not intended or offered for sale (Sec.7044,
Business & Professions Code)
I, as owner of the property, am exclusively contracting with licensed contractors to
HAZARDOUS MATERIALS DISCLOSURE
construct the project (Sec.7044, Business & Professions Code).
I have read the hazardous materials requirements under Chapter 6.95 of the
California Health & Safety Code, Sections 25505, 25533, and 25534. 1 will
I hereby affirm under penalty of perjury one of the following three
maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the
declarations:
Health & Safety Code, Section 25532(a) should I store or handle hazardous
I have and will maintain a Certificate of Consent to self -insure for Worker's
material. Additionally, should I use equi ment or devices which emit hazardous
Compensation, as provided for by Section 3700 of the Labor Code, for the
air contaminants as defined by the rea Air Quality Management District I
performance of the work for which this permit is issued.
will maintain compliance with th C p tino Municipal Code, Chapter 9.12 and
I have and will maintain Worker's Compensation Insurance, as provided for by
the Health & Safety Code, Sect'o s 55 5, 2553k, and 25534.
Section 3700 of the Labor Code, for the performance of the work for which this
(�
Owner or authorized agent: Date: /
permit is issued.
I certify that in the performance of the work for which this permit is issued, I shall
not employ any person in any manner so as to become subject to the Worker's
CONSTRUCTION LENDING AGENCY
Compensation laws of California. If, after making this certificate of exemption, I
become subject to the Worker's Compensation provisions of the Labor Code, I must
I hereby affirm that there is a construction lending agency for the performance of
forthwith comply with such provisions or this permit shall be deemed revoked.
work's for which this permit is issued (Sec. 3097, Civ C )
Lender's Name
APPLICANT CERTIFICATION
Lender's Address
I certify that I have read this application and state that the above information is
correct. I agree to comply with all city and county ordinances and state laws relating
to building construction, and hereby authorize representatives of this city to enter
upon the above mentioned property for inspection purposes. (We) agree to save
ARCHITECT'S DECLARATION
indemnify and keep harmless the City of Cupertino against liabilities, judgments,
costs, and expenses which may accrue against said City in consequence of the
I understand my plans shall be used as public records.
granting of this permit. Additionally, the applicant understands and will comply
with all non -point source regulations per the Cupertino Municipal Code, Section
Licensed Professional
9 18.
Signature Date
SIGN PERMIT APPLICATION
COMMUNITY DEVELOPMENT DEPARTMENT - BUILDING DIVISION
10300 TORRE AVENUE - CUPERTINO, CA 95014-3255
(408) 777-3228 - FAX (408) 777-3333 - bufl�dinq
CUPERTINO - -Dcupertino,or
PROJECT ADDRESSAFN
4 �3 q O r 7
3 (P
OWNER NAME Ck"i-1 CA PHONE I f O
E-MAIL
4Si
,STREET ADDRESS
CITY, STAT13, ZIP q4l()Z t FAX
7—
CONTACT NAME
I PHOC-1-b el -41 8
E-MAIL
STREET ADDRESS 744
CITY, STATE, ZIP' I" S� 4,f (1 � 6 ZZFAX
13 OWNER :CKOWNER BUILDER 11 OWNERAGENT 13 CONTRACTOR EJCONTRACTORAGM 0 ARC=CT 0 ENGINEER 0 r)E%q-q oPER 0 TENANT
CONTRACTOR NAME
LICENSE NUMBER
TICENSE TYPE
BUS. LIC 10 �iz2
785 9,
COMPANY NAME%N^
Y�' S 0 iA, I iAk
E-MAIL
AX
Low".
STREET ADDI&SS
CITY, STATE, ZIP: C9S-7/1 A
?
ARCHITECT/FNGINEER NAME
LICENSE NUMBER
BUS. LIC it
COMPANY NAME
E-MAIL
FAX
STREET ADDRESS
CITY, STATE, ZIP
PHONE
DESCRIP`1ION OF WORK U vKi/kAa 1 E�CAA;&" 04j, A
USE OF ❑ SFD or Duplex [] Multi -Family
ILLUMINATED
SIGN TYPE
NO. OF SIGN AREA
VALUATION
STRUCTURE: E] Commercial
(Y / N)_
(CODE)
SIGNS (SQ. Fr.)
y
f 9
SIGN TYPE CODES:
B BANNER SIGN M - MONUMENT (GROUND) SIGN
BL BLADE SIGN P - PROJECTINOSIGN
D DEVELOPMENT ID SIGN SP - SPECIAL EVENT BANNER
DI DIRECTIONALSIGN T - TEMPORARY
E ELECTRONIC W - WALL SIGN
READERBOARD WT - WINDOW SIGN
RECEIVED BY:
TOTALVALUATION I WO,
By my signature below, e property owner oraUthonzea property owners behalf. T have read this
tgaeach e followin - a th
application and the information T ve ro tded is coff 't. I e read the Description of Work and verify it is accurate. I agree to comply with all applicable local
=
ordinances and state laws refs ing ing const i n authorize re Antatives,f nter the above -identified property for inspection purposes.
SignatureofApplicant/Age : -- 93�yDate: eg—
SUPPLEMENTAL INFORMATION REQIJIRIiW�0�4/0
OAK-' OFFICE USE ONLY
CHECK TYPE.....
1, ROUTING SLIP
Site Plan
❑ OVER-THE-COUNTFRBUII,D'G
U' PLAN REVIEW
Elevations
Sign Details - including UL listing(s) applicable
❑ EXPRESS
;-PLANNING PLAN REVIEW
Structural Calculations (if applicable)
EJ STANDARD
❑ OTHER -
Copy of Planning Approval Letter or Meeting with Planning prior to
El LARGE
submittal of Building Permit application.
E3
m.-AjoR
SignApp_2011.doc revised 0313.7111
CITY OF CUPERTINO
WN FEE ESTIMATOR - BUILDING DIVISION
IPA
ADDRESS: 10520 s de anza blvd DATE: 02/19/2014
APN: BP#:
REVIEWED BY: Mendez
*VALUATION: j$1,000
PERMIT TYPE: Building Permit
PIAN 7T/'�':
PRIMARY Sign
USE: g
PENTAMATION 10EAP5
PERMIT TYPE:
WORK
Allstate- change si n to illuminated white channel letters
SCOPE
SIGN TYPE FEE ID QTY SIGN FEE
Wall Sign, Electric 1SIGNWELEC 1 $278
TOTALS: $278.00
Mh,(.h. Plant C'ht,(-k Phwib, Pluri C hcc,k # Branch Circuits 1 $47.00
'>c;/1. Perrrrit Fee: Plamh. Permit P'ae. IESIGN Elec. Permit Fee: IEPERMIT
11t;cr .1i�c;i. M"11C)ILer Pharnb Irtsr. Other Elec. Insp. 0.0 $47.00
NOTE: This estimate does not include fees due to other Departments (Le. Planning, Public Works, Fire, Sanitary Sewer District, School
nictrirt atr 1 Thoca foot aro hncod nn tho nroliminary infarmatinn availahlo and aro nnly an ectimato_ f.'nntart the Dent for addn'1 info_
FEE ITEMS (Fee Resolution 11-053 E . 711/13)
FEE
QTY/FEE
MISC ITEMS
Plan, Che(-4-
Suppl. PC Fee: (2) Reg. ® OT
0.0
hrs
$0.00
Permit Fee:
$278.00
Suppl. Insp. Fee:Q Reg. () OT
0.0
hrs
$0.00
PME Unit Fee:
$47.00
PME Permit Fee:
$47.00
Cons!i-uciior, Tax.
Work Without Permit? ® Yes No
$0.00
Sign Master Plan: ® Yes (E) No
$0.00
A
Travel Documentation Fee: ITRAVDOC
$47.00
Strom: Motion Fee: IBSEISMICO
$0.50
Select an Administrative Item
Bldg Stds Commission Fee: IBCBSC
$1.00
$420.50
�T
$0.00 0TAL FEE:
$420.50
Revised: 01/15/2014
STATE OF CALIFORNIA
CERTIFICATE OF COMPLIANCE, SIGN LIGHTING
CECSLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION
Certificate of Com
fiance (Sign Lighting)
(Page 1 of 4) SLTG-1C
Project Name:
J
I S
Title 24, Parts 1 and 6 of the California Code of Regulations.
• The design features represented on this Certificate of Compliance are consistent with the information provided to document
Date
Project Address:
I o 7-0
So
� (��i
C- �o r
Location of Sign
g0utdoor Signs
❑ Indoor Signs
City/S�tate/Zi�v— C,i'
Phase of Sign Construction
❑ New Signs
❑ Sign Alterations
Responsible Person's Name:
Type of Lighting Control
❑ New Lighting Controls
❑ Replaced Lighting Controls
❑ Not Installing Lighting Controls
This Certificate of Compliance includes the following components (check all that apply)
114 %Q
❑ Mandatory Measures (Lighting Controls) ❑ Maximum
Allowed Lighting Power
❑ Specific Lighting Sources
1. Certificate of Compliance Declaration Statement (this may be a CIO, C45 or other eligible person)
• I certify under penalty of perjury, under the laws of the State of California, the information provided on this form is true and
correct.
• I am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the lighting design.
• This Certificate of Compliance identifies the lighting features and performance specifications required for compliance with
Title 24, Parts 1 and 6 of the California Code of Regulations.
• The design features represented on this Certificate of Compliance are consistent with the information provided to document
this design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the
enforcement agency for approval with this building permit applicati n.
Name:
KQV111� YA,V \�hV��J/�
Signature
Co any:
i ay— -
Phone
*f z2y Zvoo
Addres : �–,
Zoo ti 1 act's
License number (may be contractor's lic #)
City/S�tate/Zi�v— C,i'
Date 9a
r
2. Installation Certificate (to be signed by responsible person after installation)
Pertntt number ..'x, ',`heekedbytDate
;3.
(EnforcementAgemy iTse _�
(EntoraementAgency Use
Installation Declaration statement
• I certify under penalty of perjury, under the laws of the State of California, the information provided on this form is true and
correct.
• I am eligible under Division 3 of the Business and Professions Code to accept responsibility for construction, or an authorized
representative of the person responsible for construction.
• 1 certify that the installed features, materials, components, or manufactured devices identified on this certificate conforms to all
applicable codes and regulations, and the installation is consistent with the plans and specifications approved by the
enforcement agency.
• I certify that the requirements detailed on this Certificate of Compliance have been met.
1 will ensure that a completed, signed copy of this Installation Certificate shall be posted, or made available with the building
permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand
that a signed copy of this Installation Certificate is required to be included with the documentation the builder provides to the
building owner at occupancy.
Company Name: _ Q
�t �S �-� I,0 I4
Responsible Person's Name:
Responsible Person's Signature:
License number (may be contractor's lie #)
Date Signed:
Position With Company:
C 70
114 %Q
2008 Nonresidential Compliance Forms
October 2010
STATE OF CALIFORNIA
CERTIFICATE OF COMPLIANCE, SIGN LIGHTING
CECSLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION
Certificate of Compliance (Sign Lighting) (Page 2 of 4 SLTG-1C
Project Name: A I (
Date:
a Z1
3. Mandatory Sign Lighting Controls
NOTES:
1. The same responsible person may install both the sign lighting power and the sign lighting controls, or a different responsible
person may install the sign lighting controls than the responsible person installing the sign lightingpower.
2. The Mandatory Measures (sign lighting controls) are required for compliance with the sign lighting Standards. If the person
responsible for installing the sign lighting power is not also responsible for the sign lighting controls, then the owner of the
sign, general contractor, or architect shall be responsible to have the sign lighting controls installed.
3. If more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of
Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible;
alternatively, the person with chief responsibility for construction shall prepare and sign the Certificate of Compliance
Declaration Statement or the entire construction.
3a. Statements of Responsibility: Any person signing the Certificate of Compliance Declaration Statement on page 1 of
4 on this SLTG-1 C shall complete Part 3a. Check Yes or No for all of the followin statements:
1
I have responsibility for installing the sign lighting controls
§133(a)l and 2. All outdoor sign lighting is controlled with an automatic time switch control plus a photo
❑ Yes, complete parts 3a and 3b of this form ❑ No, complete part 3a of this form
N
There are no existing sign lighting controls and I will be installing compliant sign lighting controls
2
❑ Yes ❑ No
3
There are no existing sign lighting controls and someone else will be responsible to install compliant sign lighting controls
❑
❑ Yes ❑ No
Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during
There are existing sign lighting controls that do not comply with the applicable provision of §119 and §133 and I will be
4
installing compliant sign lighting controls
daylight hours.
❑ Yes ❑ No
❑
There are existing sign lighting controls that do not comply with the applicable provision of § 119 and §133 and someone else
5
will be responsible to install compliant sign lighting controls
N
❑ Yes ❑ No
3b. Mandatory Sign Lighting Controls
If the person signing the Certificate of Compliance Declaration Statement on page 1 of 4 of this SLTG-1C is responsible for
complying with the sign lighting control requirements, that person shall answer all of the following questions:
If there are construction documents, indicate where on the building plans the
mandatory measures(sign lighting control note block can be located:
§133(a)1. All indoor sign lighting is controlled with an automatic time switch control that complies with the
Y
N
NA
1
applicable requirements of § 119.
A,
❑
❑
§133(a)l and 2. All outdoor sign lighting is controlled with an automatic time switch control plus a photo
Y
N
NA
control, or an outdoor astronomical time switch, that comply with the applicable requirements of § 119.
❑
❑
2
Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during
Y
NA
daylight hours.
❑
❑
§133(a)3. All outdoor signs are controlled with a dimmer that provides the ability to automatically reduce
Y
N
NA
sign ower by a minimum of 65 percent during nighttime hours.
❑
I
❑
Exception 1 to § 133(a)3. Signs illuminated for less than one hour per day during daylight hours.
Y
N
3
Exception 2 to §133(a)3. Outdoor signs in tunnels or large covered areas that require illumination during
Y
Nf�
daylight hours.
❑
Exception 3 to §133(a)3. Only metal halide, high pressure sodium, cold cathode, or neon lamps used for
Y
NA
illuminatingsigns or arts of signs.
❑
,ice
§133(a)4. An Electronic Message Center (EMC) having a new connected lighting power load greater than
N
N/A
15 kW has a control installed capable of reducing the lighting power by a minimum of 30 percent when
❑
❑
gyp(
4
receiving a demand response signal that is sent out by the local utility.
✓T
Exception to §133(a)4. EMC required by a health or life safety statue, ordinance, or regulation, including
Y
N
but not limited to exit signs and traffic signs.
❑
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 2010
STATE OF CALIFORNIA
CERTIFICATE OF COMPLIANCE, SIGN LIGHTING
CEC-SLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION,.,
Certificate of Com fiance (Sign Lighting) Pa e3 of 4 SLTG-IC
Project Name: Date:
4. Maximum AllowedLightingPower Method of Compliance
Certificate of Compliance and Field Inspection Energy Checklist
Complete this part if there are signs using the maximum allowed lighting power method of compliance. (Complete part 5
of this Certificate of Compliance if there are signs using the §X ecific lighting sources method of compliance
A
B
C
D E I F G
H
I
J
Ca
Allowed Watts
Design
Complies?
Watts
Y/N
r[�
a 3
Field
71
o
t7 f.'
��
,�
o �^�
/1 ��N
y'
�°
Inspector
0
1:4U
C
a
Li.
'�
Check that
w E
C3
>' cd
sc
-�
Sign
.flo
Complies
a�
Description
✓
H
�ilsaHhx/
❑
19.E
LED
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑`
A
Symbol or code used on the plans (when plans are required) and other documents.
B
A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents.
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed, ENERGY VERIFIED label, confirming that
the sign complies with the Section 148 of the California 2008 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power
method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized
by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National
C
Standards Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual
inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY
VERIFIED label, columns `D' through `I' are not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional
method to validate compliance. An ENERGY VERIFIED label is not needed for compliance.
D
The sign area in square feet.
E
List "I" if the sign is internally illuminated. List "E" if the sign is externally illuminated.
F
Allowed watts per square foot. Enter 12 if the sign is listed as "I" in column E. Enter 2.3 if sign is listed as "E" in column E.
G
Multiply the square footage in column D times the allowed Lighting Power Density (LPD = watts) in column F.
H
Show the total installed watts in the sign, as determined according to the applicable provisions of § 130(d or e).
I
Enter Y if the number in column H is less than or equal to the number in column G. Otherwise, the sign does not comply.
J
This page doubles as a field inspection checklist.
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 2010
STATE OF CALIFORNIA
CERTIFICATE OF COMPLIANCE, SIGN LIGHTING
CECSLTG-1C (Revised 10110) CALIFORNIA ENERGY COMMISSION 46
Certificate of Compliance (Sign Lighting) (Page 4 of 4 SLTG-1C
Project Name:
Date:
5. Specific Lighting Source Method of Compliance
Certificate of Compliance and Field Inspection Energy Checklist
Complete this part if there are signs using the Specific lighting source method of compliance. (Complete part 4 of this
Certificate of Compliance if there are signs using the maximum allowed lighting ower method of compliance)
A
B
C
D
E
OPTIONAL
Field
ENERGY
Specific light source used for
Inspector
Symbol
VERIFIED
compliance
Check that
or
Description
label
Shall include only lighting
Sign
Code
(see instructions
technologies listed belowbelow
Complies
List all that apply
Fol15 1z""V%'Ke� ��-I-�e�
❑
�'
❑
o
❑
❑
❑
❑
❑
❑
A
Symbol or code used on the plans (when plans are required) and
other documents.
B
A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents
C
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed ENERGY VERIFIED label, confirming that
this sign complies with the Section 148 of the California 2008 Title 24, Part 6 Standards, using the Specific Lighting Source Method of
Compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by
Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards
Institute in accordance with ISOJEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection
program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label,
column `D' is not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An
ENERGY VERIFIED label is not needed for compliance.
Specific Light Source Compliance Method. The sign(s) identified above use only the following lighting technologies:
List all applicable numbers (1 through 10) that apply in column D above for each row.
1
High pressure sodium lamps
2
Pulse start or ceramic metal halide lamps served by a ballast with > 88% efficient
Pulse start metal halide lamps that are:5 320 watts, are not 250 watt or 175 watt lamps, and are served by a ballast
3
with > 80% efficient
4
Neon or cold cathode lamps with transformer or power supply efficiency>_ 75% with rated output current < 50 mA
5
Neon or cold cathode lamps with transformer or ower supply efficiency>_ 68% with rated output current >50 mA
D
6
Fluorescent lamps with a minimum color rendering index (CRI) of 80
(Note: when using electronic ballasts for compliance, lamps with a CRI < 80 may be used)
7
1 Light emitting diodes(LEDs) with a power supply with > 80% efficient
Single voltage LED external power supplies designed to convert 120 volt AC input into lower voltage DC or AC
8
output, having a nameplate output power less than or equal to 250 watts, and certified to the Energy Commission as
complying with the applicable requirements of the Appliance Efficiency Regulations itle 20
9
Com act fluorescent lamps that do not contain a medium screw base sockets (E24/E26)
10
Electronic ballasts with a fundamental output frequency > 20 kHz
E
This page
doubles as a field inspection checklist.
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 2010
�, ; J i ^^p ,R-rm NT
Co;,A,,f�jt,j `( DC;:^'iI 'pa _RT1No
`oUsi-JII�,u
t
ss v w ST be'KePt at the
1r - fl ,��al%'a any
and alio\111_l�
ri n� or to
� Cial.
1 sl L lu �'Jl:ds
SHY —L i10
{ fink pjt:"'l eS ICS c,,^,,(:^ f lGdtiorS hn t1Os^a':iOi
TSF �roval of t
to p rmit ar to be an '0•pl
r roe. er s of any CitY ordinance or State Law.
P ci
F'c��v:iT ;di7.
UPERTINO
i-uiiding Department
FEB19 2014
REVIEWED FOR CODpE COMPLIANCE
Reviewed By: ' f
PLOT pyANS
CIi 'CUED BY.
ppTE
Z.9-/�
pLANNI
DEPT.
DATE .�---
10520 South De Anza Blvd. Cupertino, CA
Feb. 10th, 2014
Scope of work:
Remove existing Allstate sign from fascia
Install new LED -based Allstate sign with logo per spec
Current California Code Cycle: 2013
Submitted To:
City of Cupertino
Co Development Department Building Division
1600 Torre Avenue, Cupertino, CA 95014
SIGNS
UNLIMITED
imp -
6280 San Ignacio Ave. Suite K- San Jose, CA 95119
Ph 408-224-2800 • Fax 408-224-2818
www.esignsunlimited.com
® EXISTING
UPERTINO
SLJ"dirng OsParnent
F 19 2010
FOIA CODE COMPLIANCE
ved By: "�-;
S AGNS
tJNLI1ViITED
6280 SAN IGNACIO AVE. SUITE K • SAN JOSE, CA 95119 • Ph. 408-224-2800 • Fax 408-224-2818 • www.esignsunlimited.com
ENGINEERING
SHOP
VINYL / LAYOUT
ROUTING / KNIFE
2'-8 3/4"
V-10 1/16" Overall Length
W-7" RW Length —
5'-10 1/8"
Attach to Wall with 318" Diameter 3/16' x 2" x 2' Steel
Non -Corrosive it11 Mounting Hardware % Angle Lifting Clip.
to Suit WaA Conditions
/ See Detail Below
(Minimum B Places )
11111111711 �� -rte- -r11
_I I ■_
ii blI::I
Align Raceway Bottom With --/
Bottom Of Crossbar In "A"
Looe Face Ta WhArlonBe ick#7328 ELEVATION WA
41n, VIE
White Acrylic Vinyl
Arlon lucent E02 - ALST.CL.RW.W 1$uftan Blue 5
tat Surface Vinyl #157 Applied 15"h Ilium White RNV Chnl Ltrs
1/4" Think Plate. NOTE: All Well Dimensions MUST BE SCALE: 1" = 1'-0"
VERIFIED From Site Survey Before
1/2"Daln,eterldole. Releasing For Fabrication
1-i/2' Diameter Tube. #8 x 112" PH Phillips
Stainless Steel Screw.
STEEL MOUNTING PLATE(As Required All Around)
o
SCALE: 3" = 1'-0" 1' Metallic Silver Jewelite
1-1/2' x 2" x 3116' Thick Tdmci p. Attached Using
$ Methylene Chlodde
Steel Angle Brackets. F Followed By IPS Wald -On
112" Diameter Hardware r 40 With #8 x %" PH
Into Room Ridge. r Phillips S.S. Screws
(As Requited All Around)
114" Thick Steel Mounting `O Bltro TrIMAX Pure White -
Plate Into Fascia Board. LED's As REO'D For
1 Even Illumination. (.68w ea.)
1-i12" x 1-1/2"x 3116" Thick ,
Steel Tube Bracket. (3) Req'd. 2 9116" q
LpµV Fara To Be 118" Thick #7328 —
i- 114" Thick Bent Steel White Acrylic With Arlon Translucent
Flat Bar Welded To Tube. Sultan Blue Vinyl #157 Applied
1 $l Surface
Continuous Mounting Bar
At Top Or Raceway. Letter Feces To Be 118" Thick #7328
While Acrylic
3/8" Diameter Hardware r .050 Pre -Coat WhiteWith Trap Nuts Welded
To Flat Bar.
To Back
Chase Nipple
Attach Letters To Raceway With -
#10 x 3/4" Hex Head Screws
Stapled Construction
Drain Slots In Backs \\
Leave 2"Clearence Between Of Letters \
PLAN VIEW Roof And Tube. 4"x.040 Wht/SINer Alum.
MOUNTING BRACKET �/ Rooluted Aluminum Back osD
(3) Rewired Terra -Cotta Reef r La NOT
Be Penelretetl Per Landlord.
SCALE: 1" = V-0"
MOUNTING HARDWARE SECTION
Note: This sign Is intended to he installed In accordance with the requirements of SCALE: 1" = V-0"
Article 600 of the National Electrical Code and/or other applicable local codes.
This includes proper grounding and bonding of the sign.
SQUARE FOOTAGE: 19.06
ELECTRICAL LOAD
(1.16) Amps @ 120 Volts
ELECTRICAL REQ'MTS
(1) 20 Amo/120 Voll Circuits
LEDPower Supply
BitroTrlMex
11te ERTw,O
LEDs (.69w eat 'V
ins Per Module Tding CepartMent
�eel�Tube Brac"k'4tGu(BL?1'dt LL/oi
Tork 3000 Photo Cell LL�I YY i$
T " 11il',c-)UE
COMPLIANCE
Reviewed
Letter ces FaTo Be 118" Thick 07328 By:
White Acrylic
4 W x 4'h -Aluminum
Extruded Raceway With Lid.
NOTE: A Detailed Survey Of The Storefront
Paint To Match Fascia
And Fascia Band MUST BE COMPLETED
Prior To Fabrication,
STANDARD LETTER NOTES:
4" O.A.W.
1. Sufficient Primary Circuit In Vicinity Of Sign
By Others.
2. Letter To Letter Wiring 8 Final Primary Hook-up
By Sign Installer, Where Allowed By Local Codes.
3. Sign Shall Be U.L. Listed.
4. Mounting Hardware By Sign Installer,
5. Full Size Drilling Template Furnished With Sign.
Continuous Extruded Alum.
Mounting Tab @ Top Of RIW.
Paint To Match Raceway
1/4" Thick Bent Steel
/— Flat Bar Welded To Tube.
4 %z" r
Raceway Depth / / Attach to Flat Bar With
3/8" Dia. Hex Head Bolts
And Trap Nuts Behind
r Flat Bar. (MIn. 6 Placas)
,
r i
�
Tork 3000 Photo Call
C'
C
1/4" Thk Alum Flat Bar
ti
�
— �Weided At Mounting Points
t
r BITRO- ABU -60-12U
I to
60 Watt LED Power Supply
�I 1+_
�-� (.58 Amps Each)
�, t1)
`ter -.040" Alum Bollom Tray
j
4 %" x 4 "/:"Extruded
O
Westrlm
Shut-off
Aluminum Raceway
\ With Lid Paint To
Switch Match Fascia
Access Hole 2" From
Bottom Of Tube.
TYPICAL SIGN SECTION Extruded Aluminum
SCALE: 3" = 1'-D" Mounting Clips At Bottom
Of RIW. Palnl To Match
Raceway
6280 SAN IGNACIO AVE. SUITE K • SAN JOSE, CA 95119 • Ph. 408-224-2800 • Fax 408-224-2818 • www.esignsunlimited.com
ESITE PLAN
10520 South De Anza Blvd. Cupertino, CA
m
M
N
Q
171
�vA
R d"'9 DRQ �C�
{ F`' A ��� °amen
cc)
cc)
rnLIg1VCE
►GNS
UNLIMITED
6280 SAN IGNACIO AVE. SUITE K • SAN JOSE, CA 95119 • Ph. 408-224-2800 • Fax 408-224-2818 • www.esignsunlimited.com
ilding
partment
2014
COMPLIANCE
S► GNS
UNLIMITED
6280 SAN IGNACIO AVE. SUITE K • SAN JOSE, CA 95119 • Ph. 408-224-2800 • Fox 408-224-2818 • www.esignsunlimited.com