Loading...
13030030CITY OF CUPERTINO BUILDING PERMIT BUILDING ADDRESS: 10232 PASADENA AVE CONTRACTOR: SOLARCITY PERMIT NO: 13030030 OWNER'S NAME: GRIGNOUGUENDAL 3055 CLEARVIEW WAY DATE ISSUED: 03/062013 OWNER'S PHONE: 4156028865 SAN MATEO, CA 94402 PHONE NO: (650) 638-1028 ❑ LICENSED CONTRACTOR'S DECLARATION JOB DESCRIPTION: RESIDENTIALU COMMERCIAL License Class�i Lie. N g g (%: INSTALL 7 ROOF FLUSH MOUNTED SOLAR PANEL J Contractor c>(Cc -C r -fes% Date I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. I hereby affirm under penalty of perjury one of the following two declarations: I have and will maintain a.certificate of consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the Sq. Ft Floor Area: Valuation: $6000 performance of the work for which this permit is issued. 1 have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this APN Number: 35718042.10232 Occupancy Type: permit is issued. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is PERMIT EXPIRES IF WORK IS NOT STARTED correct. I agree to comply with all city and county ordinances and state laws relating WITHIN 180 DAYS OF PERMIT ISSUANCE OR to building construction, and hereby authorize representatives of this city to enter upon the above property for inspection purposes. (We)agree save i sp ctiono armless 180 DAYS LAST CALLED INSP C t against liabilities, judgments, indemnify and keep harmless the City keepg 7 costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply Issued by: Dat with all non -point source regulations per the Cupertino Municipal Code, Section v 9.18. t� RE -ROOFS: _ Signature Date All roofs shall be inspected prior to any roofing material being installed. If a roof is - installed without first obtaining an inspection, I agree to remove all new materials for inspection. ❑ OWNER -BUILDER DECLARATION -- Signature of Applicant: Date: I hereby affirm that I am exempt from the Contractor's License Law for one of the following two reasons: ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec.7044, Business & Professions Code) 1, as owner of the property, am exclusively contracting with licensed contractors to HAZARDOUS MATERIALS DISCLOSURE construct the project (Sec.7044, Business.& Professions Code). 1 have read the hazardous materials requirements under Chapter 6.95 of the California Health & Safety Code, Sections 25505, 25533, and 25534. I will I hereby affirm under penalty of perjury one of the following three maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the declarations: Health & Safety Code, Section 25532(a) should I store or handle hazardous I have and will maintain a Certificate of Consent to self -insure for Worker's material. Additionally, should I use equipment or devices which emit hazardous Compensation, as provided for by Section 3700 of the Labor Code, for the air contaminants as defined by the Bay Area Air Quality Management District 1 performance of the work for which this permit is issued. will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and I have and will maintain Worker's Compensation Insurance, as provided for by the Health & Safety Code, Sections 25505, 25533, and 25534. -7 Section 3700 of the Labor Code, for the performance of the work for which this Owner Lel Date: permit is issued. or authorized agent: 4� I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to heroine subject to the Worker's Compensation laws of California. If, atter making this certificate of exemption, 1 CONSTRUCTION LENDING AGENCY become subject to the Worker's Compensation provisions of the Labor Code, I must I hereby affirm that there is a construction lending agency for the performance of forthwith comply with such provisions or this permit shall be deemed revoked. work's for which this permit is issued (Sec. 3097, Civ C.) Lender's Name APPLICANT CERTIFICATION Lender's Address I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon theabove mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, ARCHITECT'S DECLARATION costs, and expenses which may accrue against said City in consequence of the I understand my plans shall be used as public records. granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section Licensed Professional 9.18. Signature Date ALTERNATIVE ENERGY PERMIT APPLICATION �l�v is COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION 10300 TORRE AVENUE • CUPERTINO, CA 95014-3255A E n ,,ll (408) 777-3228 • FAX (408) 777-3333 • buildinG(Ocupertino.org \ Jh CUPERTINO PROJECT ADDRESS ((1 22 �1 1 GS4 j - 0 Ave , 1IYY ..AIL Q�✓r /T APN a }��� I (j{ )b 23 2 ✓ OWNER NAhfE //-- Vfi nON �f r^.L✓l0 I PHONE E- e STREET ADDRESS(b 232 f7 -S4 CC*1 CTfY. STATE. ZIP }i.�r7 9rW1395 FAX /Ave. CONTACT NAMEA/� lam � G(../�/-„/r PHONE t w \ V C� STREET ADDRESS /CITY. STATE, ZIP FAX ❑ OWNER Cl OWNER -BUILDER ❑ OWNERAGENT CONTRACTOR ❑CONTRACTORAGENT ❑ ARCHDECT ❑ ENGINEER ❑ DEVELOPER Cl TENANT CONTRACTOR NAME ) ,.a LICENSE NUMBER npq- a (} O(J LICENSE TYPED` i(}I BUS.LI 4 F (-J C�J COMPANY NAME ; E B• I I 6 AA e_-, AX STREET ADORES CITY . 1 V,) (- ` 7 ARCHTTECl/ENGINcER NAME) LICENSENUMBER BUS. LIC0 COMPANY NAME E -MAB. FAX STREET ADDRESS CITY, STATE• ZIP PHONE USE OF XNSFD or Duplex ❑ Multi -Family STRUCTURE: ClCommercial PROJECT M WU.DLAND URBAN INTERFACE AREA Cl Yes 11NO PROIECT M FLOOD ZONE C3 Yes [I NO SOLAR PANELS I ❑ ELECTRIC VEHICLE CHARGING STATION 1 ❑ SOLAR WATER IEATNG ❑ OTHER. F R SOLAR PANELS: NUMBER OF PANEIS/UNrrS: KILOWATTS (C Shoff LIAL OM.Y): I � t TOTAL V UATIO J DESCRIPTION OF WORK 0( (A S 61/ • YOO� d I �SIM1 � W Ou/1'� 014 V, 4 ✓<P �5 �/. RECEF/ED BY• , r V er or authorize agent to act on the propertyer's behalf I have read this he pAthZiption By my signature below, I certify to each of the following:11ave application and the information I have p vid is cortect. read of `ADT and verify is is accurate. 1 agree to comply with all applicable local ordinances and state laws relating to b din onstruetisnoriztiv f Cu no to enter the above -identified property for inspection purposes. Signature of Applicant/Agent: Date- SAPPLEMENTAL tTORMATIONREQUIRED OFFICE USE onLY .. ;.❑-', r, yy U S bvett THE -COUNTER FMMSS TANOARD ❑ LARGE . ❑ MAJOR PYApp_2011.doc revised 03116111 CITY OF CUPERTINO IDS/% I FEE ESTIMATOR — BUILDING DIVISION `� ADDRESS: 10232 pasadena ave DATE: 03/06/2013 REVIEWED BY: Mendez l�it,'ia,i i%:,i!£{iwi. APN: BP#: `VALUATION: $6,000 *PERMIT TYPE: Building Permit PLAN CHECK TYPE: Alteration / Repair PRIMARY SFD or Duplex =# Alternative Energy System $219.00 1PHOTOVREs I Photovoltaic System,' PENTAMATION SOLAR -RES USE: Plumh. Permit Fee: PERMIT TYPE: WORK Install 7 roof flush mounted solar panel SCOPE `� FEE �W'�ii l�it,'ia,i i%:,i!£{iwi. MISC ITEMS 3'. J✓. : R ' Xfech. Plan Check Plumb. Plan Check =# Alternative Energy System $219.00 1PHOTOVREs I Photovoltaic System,' Dec.. Plan Check tbfech. Permil Fee: - Plumh. Permit Fee: -lee, Permit Fee: Other Nfech. Insp. Other Plumb Insp.Li I Other Elec. Imp. .11ech. Insp. Flee: Plumb. Lisp. Fee: Elec. Insp. Fee: NOTE: This estimate does not inchidefees due to other Departments (Le. Planning, Public Works, Fire, Sanitary Sewer District, Senooi District eta). These feav are based on the prelimina in ormadon available and are only an estimate Contact the Dept for addn'1 info. FEE ITEMS (Fee Resolution 11-053 E . 7/U12) FEE QTY/FEE MISC ITEMS Plan Check Fee: $0.00 =# Alternative Energy System $219.00 1PHOTOVREs I Photovoltaic System,' Suppl. PC Feer Q Reg. , Q OT 0.0 hrs $0.00 PME Plan Check: $0.00 Permit Fee: $0.00 Suppl. Insp. Fee -.0 Reg. O OT 0,0 hrs $0.00 PME Unit Fee: $0.00 PME Permit Fee: $0.00 Consiniction Tas: Administrative Fee: O O Work Without Permit? Q Yes Q No $0.00 Advanced Planning Fee: $0.00 Select a Non -Residential Building or Structure 0 O A T rm'e[ Documentation Fees: Strong Motion Fee: IBSEISMICR $0.60 Select an Administrative Item Bldg Stds Commission Fee: IBCBSC $1.00 l', $1.60 $219.00 I, v f<LL'G T01?AL'EE: $220.60 Revised: 01/01/2013 CUPERTINO CONTRACTOR / SUBCONTRACTOR LIST Building Department City Of Cupertino 10300 Tone Avenue Telephone: 408-777-3228 Fax: 408-777-3333 *Our municipal code requires all businessks working in the city to have a City of Cupertino business license. NO BUILDING FINAL" OR'FINAL OCCUPANCY IN ECTI N(S) WILL BE SCHEDULED UNTIL THE GENERAL CONTRACTOR AND AMSUBONTRAC ORS VE O TAINED A CITY OF CUPERTINO BUSINESS LICENSE. I am not using any subcontractors: Sigure Date Please check applicable silli contractors and comple a the following information: 3/ Date SUBCONTRACTOR BUSINESS NAME BUSINESS LICENSE # Cabinets & Millwork Cement Finishing Electrical Excavation Fencing Flooring / Carpeting., Linoleum / Wood Glass / Glazing Heating Insulation Landscaping Lathing Masonry Painting / Wallpaper' Paving Plastering Plumbing Roofing Septic Tank Sheet Metal Sheet Rock Tile 30, Date ABBREVIATIONS ELECTRICAL NOTES INDEX LICENSE JURISDICTION NOTES A AMPERE 1. WHERE ALL TERMINALS OF THE DISCONNECTING PV1 COVER SHEET CA # 888104 ALTERNATING CURRENT MEANS MAY BE ENERGIZED IN THE OPEN PV2 SITE PLAN C-46, C-10 BL BLDG BUILDING POSITION, A SIGN WILL BE PROVIDED WARNING PV3 STRUCTURAL VIEWS CONIC CONCRETE OF THE HAZARDS PER ART. 690.17. PV4 UPLIFT CALCULATIONS C COMBINER BOX 2. EACH UNGROUNDED CONDUCTOR OF THE PV5 THREE LINE DIAGRAM D DISTRIBUTION PANEL MULTIWIRE BRANCH CIRCUIT WILL BE IDENTIFIED PV6 ELECTRICAL CALCULATIONS DC DIRECT CURRENT BY PHASE AND SYSTEM PER ART. 210.5. PV7 ELECTRICAL CALCULATIONS EGC EQUIPMENT GROUNDING CONDUCTOR 3. A NATIONALLY—RECOGNIZED TESTING Cutsheets Attached (E) EXISTING LABORATORY SHALL LIST ALL EQUIPMENT IN EMT G ELECTRICAL METALLIC TUBING SOLAR GUARD METER COMPLIANCE WITH ART. 110.3. 4. CIRCUITS OVER 250V TO GROUND SHALLCOPI .y. GALV GALVANIZED COMPLY WITH ART. 250.97, 250.92(B) CUTSHEETS ATTACHED INSTALLING 7—ROOFTOP FLUSH—MOUNTED SOLAR GEC GROUNDING ELECTRODE CONDUCTOR 5. DC CONDUCTORS EITHER DO NOT ENTER MODULES (1.715 kW) GND GROUND BUILDING OR ARE RUN IN METALLIC RACEWAYS GENERAL NOTES HDG HOT DIPPED GALVANIZED OR ENCLOSURES TO THE FIRST ACCESSIBLE DC I CURRENT DISCONNECTING MEANS PER ART. 690.31(E). Imp CURRENT AT MAX POWER 6. ALL WIRES SHALL BE PROVIDED WITH STRAIN 1. THIS SYSTEM IS GRID—INTERTIED VIA A INVS INVERTERS RELIEF AT ALL ENTRY INTO BOXES AS UL—LISTED POWER—CONDITIONING INVERTER. APN #: 357-18-042 CUPERTINO Isc SHORT CIRCUIT CURRENT REQUIRED BY UL LISTING. 2. THIS SYSTEM HAS NO BATTERIES, NO UPS. kVA KILOVOLT AMPERE 7. MODULE FRAMES SHALL BE GROUNDED AT THE 3. PHOTOVOLTAIC SOURCE AND INPUT CIRCUITS AND Building Department kW KILOWATT UL—LISTED LOCATION PROVIDED BY THE INVERTER INPUT CIRCUIT ARE UNGROUNDED. LBW LOAD BEARING WALL MANUFACTURER USING UL LISTED GROUNDING 4. SOLAR MOUNTING FRAMES ARE TO BE GROUNDED MAR D .4 2013 MIN MINIMUM HARDWARE. 5. ALL WORK TO BE DONE TO 2010 CALIFORNIA Flashing will be painted to match exterior. MIR MIRROR 8. ALL EXPOSED METAL PARTS (MODULE FRAMES, 6. BUILDING CODE. ALL ELECTRICAL WORK SHALL COMPLY WITH THE A REVIEWED FOR CODE COMPLIANCE (N) NEW NATIONAL ELECTRIC CODE RAIL, BOXES, ETC.) SHALL BE GROUNDED USING UL LISTED LAY—IN LUGS LISTED FOR THE 2008 NATIONAL ELECTRIC CODE AS AMENDED BY Reviewed By: NEC THE 2010 CALIFORNIA ELECTRIC CODE. NIC NOT IN CONTRACT PURPOSE. POSTS SHALL BE MADE NTS NOT TO SCALE ELECTRICALLY CONTINUOUS WITH ATTACHED OC ON CENTER RAIL. P PANEL BOARD 9. MODULE FRAMES, RAIL, AND POSTS SHALL BE PL PROPERTY LINES BONDED WITH EQUIPMENT GROUND CONDUCTORS PV PHOTOVOLTAIC AND GROUNDED AT THE MAIN ELECTRIC PANEL. �L( i'i.Alr� PVC POLYVINYL CHLORIDE 10. THE DC GROUNDING ELECTRODE CONDUCTOR VICINITY MAP Clomw 8Y S SUBPANEL SHALL BE SIZED ACCORDING TO ART. 3 SCH SCHEDULE 250.166(B) & 690.47. SS STAINLESS STEEL MUNITY DEVELOPMENT DEPARTMENT • . .•�" g� I �. DAA �Dvk SSD SEE STRUCTURAL DRAWINGS BUILDING DIVISION - CUPERTINOOM �Ir by � ' - iP STC STANDARD TESTING CONDITIONS SOLAR WATER HEATER APPROVED PLANNIN'� SWH TYP UON TYPICAL UNLESS OTHERWISE NOTED This 5, plans and specifications MUST be kept at the It is unlawful to make any , UPS UNINTERRUPTIBLE POWER SUPPLY lob ring construction. jes or alterations on same, or to deviate V VOLT VOLTAGE AT MAX POWER the; I, without approval from the Building Official. Vmp Voc VOLTAGE AT OPEN CIRCUIT '7a this and specifications SHALL NOT w �� �:' I� ``I`' ° W T; WATT of plan ? Vpermit or to be an approval of the violation 3R NEMA 3R, RAINTIGHT it Ordinance or State Law. ;visions of any City P,. VI, G REV BY DATE COMMENTS � I i� _L 3 e r r �.- n i� � r ♦ 44 Li CONFIDENTIAL — THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE JOB NUMBER: J B-9501395 00 PREMISE OWNER GRIGNOU AHJ DESCRIPTION: GWENDAL GRIGNOU RESIDENCE DESIGN: TBLAU / MARKET: REST MODULES TRINA SOLAR TSM-245PC05 PA05.18 BENEFIT OF ANYONE NOR SHALL IT PART TO OTHERS EXCEPT SOLARCITY INC., BE DISCLOSED IN WHOLE OR IN OUTSIDE THE RECIPIENTS 10232 PASADENA AVE 1.715 KW PV Array CUPERTINO, CA 95014 SolarCity. PROECT MANAGER: ORGANIZATION, EXCEPT IN CONNECTION WITH MOUNTING SYSTEM: THE SALE AND USE OF THE RESPECTIVE SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN Comp Mount Type C with Lifter PACE NAME: 3055 Clearview way San Mateo, CA 94402 T:(650) 638-1028 F:(650) 638-1029 SHEET: REV: DATE: PAYMENT TYPE: INVERTER: PERMISSION OF SOLARCITY INC. PPA POWER—ONE # AURORA PVI-3.0—OUTD—S— S4156028865 COVER SHEET PV 1 3/5/2013 (888)-SOL-CrrY(765-2489) www.solarcity.com 10232 Pasadena Ave n m PITCH: 23 ARRAY PITCH: 23 MPI AZIMUTH: 180 ARRAY AZIMUTH: 180 MATERIAL: Comp Shinqle STORY: 2 Stories CUPERTINO ] Building Depart►nent ,Emil 32013 Y AREA:125.85 sq ft REVIEWED FOR CODE COIViPLIANCE AREA: 1896.8 sq ft Reviewed By J�91-v h•i w Y AREA IS -6.6 DOF AREA. LEGEND Q (E) UTILITY METER & WARNING LABEL INVERTER W/ INTEGRATED DC DISCO & WARNING LABELS © DC DISCONNECT & WARNING LABELS Ar I AC DISCONNECT & WARNING LABELS Q JUNCTION BOX Q DC COMBINER BOX & WARNING DISTRIBUTION PANEL & WARNING Q LOAD CENTER & WARNING LABELS O DEDICATED PV SYSTEM METER CONDUIT RUN ON EXTERIOR -- CONDUIT RUN ON INTERIOR GATE/FENCE - - - INTERIOR EQUIPMENT SITE PLAN N Scale: 1/8" = V W E 0 1' 8' 16' S CONFIDENTIAL — THE INFORMATION HEREIN CONTAINED SHALL NOT USED FOR THE JOB NUMBERJ B-9501395 00 PREMISE OWNER AH,k DESCRIPTION: GRIGNOU, GWENDAL GRIGNOU RESIDENCE DESIGN: MARKET: RESI MODUIfS TRINA SOLAR TSM-245PC05 PA05.18 BENEFIT OF ANYONE EXCEPT SOLARCITY INC., NOR SHALL IT BE DISCLOSED IN WHOLE OR IN 10232 PASADENA AVE 1.715 KW PV Array •-�.SolarC�T o PART TO OTHERS OUTSIDE THE RECIPIENTS ORGANIZATION, EXCEPT IN CONNECTION WITH CUPERTINO, CA 95014 PROLECr MANAGER' MOUNTING SYSTEM: THE SALE AND USE OF THE RESPECTIVE SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN Comp Mount Type C with Lifter PAGE NATE: 3055CIearviewWay San Mateo, CA 94402 SHEET. REV: DATE PAYMENT TYPE: PPA INVERTER I POWER -ONE # AURORA PVI-3.0-OUTD-S- PERMISSION OF SOLARCITY INC 54156028865 SITE PLAN PV 2 3/5/2013 T:(650)638-1028 ':(650)638-1029 (888)-SOL-CIfY(765-2489)www.solarcity.coro PV MODULE " BOLT WITH LOCK & FENDER WASHERS ZEP LEVELING FOOT ZEP ARRAY SKIRT ZEP COMP MOUNT C ZEP FLASHING C (E) COMP. SHINGLE (E) ROOF DECKING J" LAG BOLT WITH SEALING WASHER (E) RAFTER (6) (4) I I (3) (1) (2) (5) LOWEST MODULE ouwJJ ww"l\ 1 lvlwuv""J INSTALLATION ORDER LOCATE RAFTER, MARK HOLE (1) LOCATION, AND DRILL PILOT HOLE. (2) SEAL PILOT HOLE WITH POLYURETHANE SEALANT. (3) INSERT FLASHING. (4) PLACE MOUNT. (5) INSTALL LAG BOLT WITH SEALING WASHER. (6) INSTALL LEVELING FOOT WITH BOLT & WASHERS. (E) 2x8 RAFTERS 24" SPACING FRONT VIEW OF MP1 RAFTER: 2x8 SUPPORT: 2x8, 24, MAX SPAN: 10'-2" SCALE: 1/2" = 1' UPERTINO Building DePartme (E)8" F.T R F� ® a 2013 EV;EINED FOR CODE COMPLIANC ,eviewed By: L X1.1 (E) 2x6 CEILING JOIST ® 16" O.C. STANDOFF SIDE VIEW OF MP1 S1 A CONFIDENTIAL — THE INFORMATION HEREIN CONTAINED SHALL NOT USED FOR THE q8 NUMBER J B-9501395 00 PREMISE 0*8: AN't GRIGNOU, GWENDAL DESCRIPTION• GRIGNOU RESIDENCE TIGN: �,��!• ■ ��'•�O'��I� MARKET: RESI MODULES TRINA SOLAR TSM-245PC05 PA05.18 BENEFIT OF ANYONE EXCEPT SOLARCITY INC., E NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE THE RECIPIENT'S 10232 PASADENA AVE CUPERTINO, CA 95014 1.715 KW PV Array � a MANAGER: ORGANIZAl10N, EXCEPT IN CONNECTION WITH PROJECT MOUNTING SYSTEM: t 3055 Clearview Way THE SALE AND USE OF THE RESPECTIVE SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN Comp Mount Type C with LifterSan PAGE NNff: Mateo, CA 94402 T:(650)638-1028 R(650)638-1029 SHEET REV: DATE ENT TYPE: MVERTM PERMISSION OF SOLARCITY INC [�� PPA POWER—ONE # AURORA PVI-3.0—OUTD—S— 54156028865 STRUCTURAL VIEWS PV 3 3/5/2013 (868)-SOL-CItt (765-2489) www.solarcity.can CONFIDENTIAL — THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT SOLARCITY INC., NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE THE RECIPIENT'S ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF SOLARCITY INC. UPLIFT CALCULATIONS 3/5/2013 -s sx r r Version # 4.1 t . l e - o " f 1'' Project Information System & MP Information Symbol Value Related Info Occupancy Category 11 FV System Type SolarCity SleekMount"° P1 Module Y411014�� 7?Zlllllq Total [lumber of Modules 7 Roofing Material Comp Roof rdumber of Layers (Comp Roofs Only' 2 Tile Reveal (Tile Roofs Only) HA Roof Slope 2:: Spanning Vents? Yes F\` Module Orientation Landscape PV Module Length 3.2 ft FV Module vfidth 5.4 ft Attachment Type Comp Mount Type C viith Lifter Total Square Feet of Array 123 sf Wind Design Criteria Vhnd Design Code ASCE 7-05 Partially/Fully Enclosed Method Exposure Categore B Section 6.5.6.3 Basic Wind Speed 51 85 mph Fig. 6-1/1-ocal Data Least Horizontal Dimension of Buildinq LHD 30 ft Roof Style Gable Roof Fig. 6-11B/C/D-14A;B Mean Roof Height h 26 ft Section 6.2 Wind Zone Interior Edge Corner Wind Pressure Up (psf: p(up ;10.0 17.4 27.0 'diind Pressure Dovvn (psf', pfdovdn) 10.0 10.0 10.0 Snow Design Criteria Coefficients Ground Snow Load pg Table 7-1r1-ocal Data Comp Allowable Attachment Spacing (inches) and Tributary Area (sf) Interior Edge Corner Maximum Allowed Foot Spacing Landscape 48" 48" 48" Maximum Allovaed Cantilever Landscape 24" 24" 24" Max Standoff Tributary Area TribCL 13 sf 13 sf 13 sf F'o Assembly Dead Load %*j FV 3 psf 3 psf 3 psf DLPV PCL 39lbs 39lbs 39lbs 'd1LUF - 0.6 DLPV TCL -107 lbs -202 lbs -327 lbs Attachment Uplift Capacity TallOW 637 lbs 637 lbs 637 lbs TCL,Tallov: DCRLand 16.7?c 31.7; 51AP4 JOB NUMBER JB -9501395 0 0 MARKET: MODULES: RESI TRINA SOLAR # TSM-245PC05 PA05.18 PRO,ECT MANAGER: MOUNTING SYSTEM: Comp Mount Type C with Lifter PAYMENT TYPE: INVERTER: PPA POWER -ONE # AURORA PVI-3.0-OUTD- PREMISE OWNER: AHJ: GRIGNOU, GWENDAL 10232 PASADENA AVE CUPERTINO, CA 95014 156028865 DESCRIPTION: GRIGNOU RESIDENCE 1.715 KW PV Array PAGE NAME: UPLIFT CALCULATIONS CUPERTINO ; Building Depatnent F:. MAR 0 v 2013 REVIEWED FOR CODE COMPLIANCE Reviewed By: ���i DESIGN: TBLAU SHEET: REV. DATE PV 4 3/5/2013 �����SolarCi I►� 3055 Ciearview Way San Mateo, CA 94402 T:(650) 638-1028 F:(650) 638-1029 (888)-SOL-CrrY (765-2489) www.solarcity.com GROUND SPECS MAIN PANEL SPECS GENERAL NOTES INVERTER SPECS MODULE SPECS LICENSE BOND (N) #8 GEC TO (E) GROUND ROD E 200A MAIN SERVICE PANEL Inv 1: DC Ungrounded INV 1 —(1)I POVIER-ONE ALRORA �'o-OTD-S-U$ LAS` A — (y) RI AwnAR P CA # 888104 AT PANEL WITH IRREVERSIBLE CRIMP �E; 200/2P MAIN CIRCUIT BREAKER Tie—In: Load Side Top x ae 2+aSM-24 JIM. elan F,a,,, Voc: 37.3 C-46, C-10 Panel Number: INV 2 Meter Number: 1008754002 *MODULE CURRENT MODULE CURRENT RATINGS ARE SHOWN AS Isc AND Imp IN Underground Service Entrance INV 3 THE DC STRINGS IDENTIFIER OF THE SINGLE LINE DIAGRAM. MAIN SERVICE PANEL ADJUST MIN. ACTIVATION VOLTAGES! CUTLER—HAMMER Disconnect CUTLER—HAMMER Inverter 1 PAR 20OA/2P Disconnect 2 POWER—ONE A 20A AURORA PVI-3.0—OUTD—S—US A B Li zaov B L2 GFP/GFCI N EGC/ DC+ SET MI . AC NATION VOLTAGE TO 1 .13V --------------------------GEC DC- PDC+ 1String(s)Of7OnMPI EGC-------------------------------------- ---- I TO (E) Sub—Panel 1 1 N 1 I EGC/GEC C) --- z z CD TO 120/240V 1 1 SINGLE PHASE UTILITY SERVICE 1 1 f ; z `V CUPERTINO Building Department VIAR 2013 REVIEWED FOR CODE COMPLIANCE Reviewed By: POI (2) ILSOD III PC 4/0 -JB hm rodatim Piercing Coeator, Main 4/0-4, Tap 8-14 A (1 )OMER-HAMMER, DG221NR8 AC Disnecl: MA, 240Vac, Fudbl% NEMA JR DC — (1)wn OUIIER-HAMMER / DG100M ST LOAD SIDE TAP. DISCONNECTING MEANS SHALL BE PER NEC. I0 00--100k Gowd Duty (DD) TAPPING 4/0 AL CONDUCTOR — (1) OMERNW Ohne R Fuse Kit —(2)FERRAZ sHAMTM1Tr I7R20R Pv DOOM OCP Fuge; 20A, 250V. O1oee RK5 — g (I CIMER—HAMMER # DG22ItM Diaw■eal: 30A. 24oyac, Non—Fae�, NEMA 3t — (1)/N ERS tun 30A. Gawd Duty (DG) O (1) AWG ro, THW-2, Bads 13r (1) AWG p0. THMN-2. Red LULL (2) Awr no. Pv wm, mock (� (1) AN A SdM Bare Copper EGC Voc 261.1 VDC Isc - 8.47 ADC Vmp =214.9 VDC Imp = 7.98 ADC (1) AWG /10. THWN-2. Mite NWTRAL Vmp = 240 VAC Imp =14.5 AAC ......... (1) conduR KR;. 3/1'. P? ......................................... -, (,1) AWG A TH"7Z, Grean ..... EGC/GEC ...- (1) 9*01t KiC .3/4' OAT ............ CONFIDENTIAL -TIN INFORMATION HEREIN CONTAINED SHALL NOT E USED FOR THE BENEFIT OF ANYONE EXCEPT SOI.ARgTY INC., NOR SHALL IT BE DISCLOSED IN WHOLE OR IN JB -950137 0 0'" JOB NUMBERTBLAU °MNQ� "'� GRIGNOU, GWENDAL 10232 PASADENA AVE DESCRIPTION: GRIGNOU 1.715 KW RESIDENCE PV Array DESIGN: .�', solarcity. MAPo(ET: MODULES PART TO OTHERS OUTSIDE THE RECIPIENTS RESI TRINA SOLAR TSM-245PC05 PA05.18 C U P E R TI N 0, C A 9 5014 PROJECT MANAGER: ORGANIZATION, EXCEPT IN CONNECTION WITH MOUNTING SYSTEM: i THE SALE AND USE THE RESPECTIVE SOLARCITY EQUIPMENTT,, WITHOUT THE WRITTEN COm Mount T e C with Lifter PAGE NAME: 3055 Clearview Way San Mateo, CA 94402 SHEET: REV. DATE: PAYMENT TYPE: PPA INVERTER POWER—ONE # AURORA PVI-3.0—OUTD—S— PERMISSION OF SOLARCITY IK S 156028865 THREE LINE DIAGRAM 3 5 2013 PV 5 / / T:(650)638-1028 F:(650)638-1029 (888)-SOL-C1TY(765-2489) www.solarCty.com a. Conductor must have 30 deg. C ampacity >= 125% of continuous current per Art 215.2(A)(1). b. Conductor must have (after corrections for conditions of use) >= continuous current per Table 310.16. c. Evaluate conductor temperature at terminations per 110.14(C). Ampacity of wire derated for conditions of termination must be >= continuous current*1.25. All string terminations are rated at 90* C. ------------------------------------------ 2. OCP Sizing per Art 690.8(B)(1) a. Round up to next size per Art 240.4(B) ------------------------------------------- 3. Conductor Sizing per Art 690.8(6)(1) a. Conductor must have 30 deg. C ampacity >= 125% of continuous current per Art 215.2(A)(1). b. Conductor must have (after corrections for conditions of use) >= continuous current per Table 310.16. c. Evaluate conductor temperature at terminations per Art 110.14(C). Ampacity of wire derated for conditions of termination must be >= continuous current*1.25. All branch terminations are rated at 75* C min. ------------------------------------------ 4. OCP Sizing a. Round up to next size per Art 240.4(8) ------------------------------------------ 5. Conductor Sizing per Art 690.8(B)(1) a. Conductor must have 30 deg. C ampacity >= 125% of continuous current per Art 215.2(A)(1). b. Conductor must have (after corrections for conditions of use) >= continuous current per Table 310.16. c. Evaluate conductor temperature at terminations per Art 110.14(C). Ampacity of wire derated for conditions of termination must be >= continuous current*1.25. All inverter output terminations are rated at 75' C_ --- ------------------------------ 6. OCP Sizing a. Round up to next size per Art 240.4(8) 7. Conductor Sizing per Art 690.8(B)(1) a. Conductor must have 30 deg. C ampacity >= 125% of continuous current per Art 215.2(A)(1). b. Conductor must have (after corrections for conditions of use) >= continuous current per Table 310.16. c. Evaluate conductor temperature at terminations per Art 110.14(C). Ampacity of wire derated for conditions of termination must be >= continuous current*1.25. All inverter output terminations are rated at 75* C min. CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT SOLARCITY INC., NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE THE RECIPIENTS ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF SOLARCITY INC. JOBNIIAm JB -9501395 00 MARKET I MODULES ELECTRICAL CALCULATIONS Module: 7 Trina TSM-245PCO5.18 Black ZEP 222.9 InvPwr W PTC StrLen Voltage Drop Calculations Version 59.8 Inverter 1: 1 Power -One PVI -3.0S 96.0% 3,300 1,498 10 Vdrop = (Imp) * (2 " Length) * (Resistance) / (Vmp) Module: X I Imp (A) Max. Length (ft) Wire Inverter 2: String: 1 7-98 35 1 C AWG 10 I at Max Ave Hi: 84 deg F Module: Vdrop = (7.98 A * 70 ft * 0.00124 Ohms) / 196 V = 0.35% Inverter 3: Branch: 7.98 60 1 C AWG 10 at Max Ave Hi: 84 deg F Module: Vdrop = (7.98 A * 120 ft * 0.00124 Ohms) / 196 V = 0.61% Inverter 4: Total voltage drop in DC conductors =r 0.96% Inverter 14.50 20 1 C AWG 10 at 240V Total: 7 modules Total Inv Pwr 3,300 1,498 PTC Vdrop = (14.50 A * 40 it * 0.00120 Ohms) / 240 V 0.29% Photovoltaic Module Electrical SpeciticaUons: Total STC 1,715 Combined 14.50 0 1 E AWG 06 at 240V Voc= 37.3 V deg F deg C Vdrop = (14.50 A * 0 It * 0.00049 Ohms) / 240 V 0.000/0 Vmp= 30.7 V Record Low Temp: 32 0 Total voltage drop in AC conductors = 0.29°,6 Isc= 8.47 A Max Average Hi Temp: 84 28.88888889 Total voltage drop in AC and DC conductors = 1 1.25% Imp= 7.98 A Twc= -0.11936 V/deg C Power -One Strings: Parallel MPPT Tisc= 3.981 mA/deg C String Type A and 2 Combined Strings Type A Voc Correction Method: Manuf Tvoc data Branch Circuit Type A 1 -way wire length: 60 ft PovuerOne PVI -3.0-S 1 strings per branch 1 7 Trina TSM-245PCO5.18 Black ZEP Inverter Min Vdc Input: 120 Vdc 7 modules per series string Voc= 261.1 V Min Vmp at Max Temp: 196 Vdc Voc= 261.1 V Vmp= 214.9 V Max Voc at Min Temp: 282 Vdc Vmp= 214.9 V Isc= 8.47 A Inverter Max Vdc Input: 600 Vdc Isc= 8.47 A Imp= 7.98 A Max String Size: 14 Imp= 7.98 A (cont-- 10.59 A Art 690.8(A)(1) 1 -way wire length: 35 it (cord= 10.59 A Art 690.8(A)(1) 1.a Conductor. C AWG 10 PV Wire Za Conductor 1: C AWG 10 PV Wire Conductor 1: Icont * 1.25 = (Amps) 13.23 (cont * 1.25 = (Amps) 13.23 30 deg C ampacity = 40 30 deg C ampacity = 40 1.b Icont-- (Amps) 10.59 Zb Icont-- (Amps) 10.59 Start ampacity 40 Start ampacity 40 Temperature derate (%=F) 0.76 Temp. derate (%=F) 0.76 Conduit fill derate (°r6=#) 1 Cn dt. fill derate (%_ 1 _ Derated ampacity 30.40 Derated ampacity 30.41 1_ a Term 1 To -uildirig Departrne 1.c Icont*1.25= (Amps) 13.23 Temp table 75degC 75d@E Ampacity 40 2.c Icont*1.25= (Amps) 13.23 !}; =x 2d Ampacity EGC 35 C AWG 10 Art. 250.122 1.d Icont * 1.25 = (Amps) 13.23 OCP size = 15 OCP size = 15 1 s PGR 4 Inverter Two A Outout Combined Inverter Output Reviewed By. ��� Power -One PVI -3.0S 1 -way wire length: 20 ft Service Voltage- 240 Volts (cont= 14.50 A Art 690.8(A)(1) Total Inverter Power- 3,300 Nameplate Watts 1 -way wire length: 0 it Icont = # of inverters*max inverter current Art 690.8(A)(1) 3.a Icont *1.25 - (Amps) 18.13 A Art 690.8(B)(1) OCP size = 20 A Art. 240.6(A) kront = (Amps) 14.50 3.b Conductor C AWG 10 THWN-2 at 90 deg C: Table 310.16 4.a Icont *1.25 = (Amps) 18.13 A Art 690.8(B)(1) (cont * 1.25 = (Amps) 18.13 OCP size = 20 A Art. 240.6(A) 30 deg C ampacity = 40 4.b Conductor E AWG 06 Icont * 1.25 = (Amps) THWN-2 at 90 deg C: Table 310.16 18.13 3.c Icont-- (Amps) 14.50 Start ampacity 40 30 deg C ampacity = 75 Temperature derate (%=F) 0.91 4.c Icont= (Amps) 14.50 Conduit fill derate (%_ 1 Start ampacity 75 Derated ampacity 36.4 Temp. derate (%=F) Cn dt. fill derate (%=#) 0.91 1 3.d Icont*1.25= (Amps) 18.13 Ampacity 35 Derated ampacity 68.25 3.e EGG/GEC = D AWG 08 Art. 690.47(C)(3), 250.166(6) 4 d Icontt*1.25= (Amps) 18.13 Ampacity 65 PKtMttol MMAbtn: MOUNTING SYSTEM: Comp Mount Type C with Lifter ONE # AURORA PVI-3.0-OUTD-S- PREMISE OWNER: AH1 GRIGNOU, GWENDAL 10232 PASADENA AVE CUPERTINO, CA 95014 156028865 GRIGNOU RESIDENCE 1.715 KW PV Array PAGE NAME: ELECTRICAL CALCULATIONS TBLAU SHEET. REV: DATE: PV 6 3/5/2013 t 0 3055 Cleandew Way San Mateo, CA 94402 T:(6SO) 638-1028 F:(650) 638-1029 (888)-SOL-CrnY (765-2489) www.solarcity.com (E) LOAD CALCULATIONS* CONFIDENTIAL - THE INFORMATION HEREIN JOB NUMBS JB -9501395 0 0 CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT SOLARCITY INC., MARKET: MODULES NOR SHALL IT BE DISCLOSED IN WHOLE OR IN RESI TRINA SOLAR J TSM— PART TO OTHERS OUTSIDE THE RECIPIENT'S ORGANIZATION, EXCEPT IN CONNECTION WITH PROJECT MANAGER: MOUNTING SYSTEM: THE SALE AND USE OF THE RESPECTIVE Comp Mount Type C with Lifter SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PAYMENT TYPE: INVERTER: PERMISSION OF SOLARCITY INC. PPA I POWER—ONE # AURORA PVI-3.0—OUTD- PREMISE OWNER: Mi.. GRIGNOU, GWENDAL 10232 PASADENA AVE CUPERTINO, CA 95014 156028865 DESCRIPTION: GRIGNOU RESIDENCE 1.715 KW PV Array PAGE NAME: ELECTRICAL CALCULATIONS CUPERT'INO Building Department MAR 0 a 2013 REVIEWED FOR CODE COMPLIANCE Reviewed By: J�91-( *Per conversation with Larry Squarcia, load calculations are provided for plan checker's review. TBLAU ;P; � ' ' II SHEET: REV: DATE: PV 7 3/5/2013 SolarCity. 3055 Clearview Way San Mateo, CA 94402 T:(650) 638-1028 R(650) 638-1029 (888) -SOL -CITY (765-2489) www.solarcity.com NEC 2008 220.82 - Residential Load Calculation Version 2.1 L1/L2 240 V NEC 220.82(B) "The general calculated load shall be not less than 100% of the first 10 kVA plus 40% of the remainder of the following loads..." NEC 220.82(B)(1) "The calculated floor area shall not include open porches, garages, or unused ... spaces..." Floor Area 3,600 square feet x 3VA/sq ft 10,800 VA NEC 220.82(B)(2) "1500 volt-amperes for each 2 --wire, 20 -ampere small appliance branch circuit and each laundry branch circuit..." Small Appliance Circuits 12 circuits x 1500VA/circuit 18,000 VA Laundry Circuits 1 circuits x 1500VA/circuit 1,500 VA Bathroom Circuits 3 circuits x 1500VA/circuit 4,500 VA NEC 220.82(Bx3) "The nameplate rating of all appliances... ranges, wall -mounted ovens, counter -mounted cooking & 220.82(B)(4) units... clothes dryers that are not connected to the laundry branch circuit... [and] water heaters" 2P Breaker VA Oven- Sub#1 40 7,680 Dryer- Sub#1 30 5,760 Dishwasher- Sub#1 15 2,880 Lights- Sub#1 15 2,880 Dryer-Sub#2 30 5,760 0 0 0 0 0 0 24,960 total VA Total of non air-conditioning loads: 59,760 total VA First 10 kVA of load at 100% 10,000 Remainder of load at 400/6 19,904 Adjusted total of non air-conditioning load 29,904 VA NEC 220.82(C) "Heating and air-conditiong load..." 2P Breaker VA A/C- Sub#1 30 5,760 Total of A/C Loads and All Other Loads: 35,664 total VA Total Proposed Calculated Load: 148.60 Amps JB - 9501395 larCi ® copyright Solaraty 2013 CONFIDENTIAL - THE INFORMATION HEREIN JOB NUMBS JB -9501395 0 0 CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT SOLARCITY INC., MARKET: MODULES NOR SHALL IT BE DISCLOSED IN WHOLE OR IN RESI TRINA SOLAR J TSM— PART TO OTHERS OUTSIDE THE RECIPIENT'S ORGANIZATION, EXCEPT IN CONNECTION WITH PROJECT MANAGER: MOUNTING SYSTEM: THE SALE AND USE OF THE RESPECTIVE Comp Mount Type C with Lifter SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PAYMENT TYPE: INVERTER: PERMISSION OF SOLARCITY INC. PPA I POWER—ONE # AURORA PVI-3.0—OUTD- PREMISE OWNER: Mi.. GRIGNOU, GWENDAL 10232 PASADENA AVE CUPERTINO, CA 95014 156028865 DESCRIPTION: GRIGNOU RESIDENCE 1.715 KW PV Array PAGE NAME: ELECTRICAL CALCULATIONS CUPERT'INO Building Department MAR 0 a 2013 REVIEWED FOR CODE COMPLIANCE Reviewed By: J�91-( *Per conversation with Larry Squarcia, load calculations are provided for plan checker's review. TBLAU ;P; � ' ' II SHEET: REV: DATE: PV 7 3/5/2013 SolarCity. 3055 Clearview Way San Mateo, CA 94402 T:(650) 638-1028 R(650) 638-1029 (888) -SOL -CITY (765-2489) www.solarcity.com CAUTION POWER TO THIS BUILDING IS ALSO SUPPLIED FROM THE FOLLOWING SOURCES WITH DISCONNECTS LOCATED AS SHOWN: - Address: 10232 Pasadena Ave FRONT OF HOME 7 INVERTER & X SOLAR AC DISCONNECT PHOTOVOLTAIC X ON ROOF U11UTy X SERVICE PHOTOVOLTAIC BACK -FED CIRCUIT BREAKER IN MAIN ELECTRICAL PANEL IS A/C DISCONNECT PER NEC 690.17 OPERATING VOLTAGE = 240 V MAX CURRENT = 16 A CONFIDENTIAL — THE INFORMATION HEREIN ,TOB NUMBER: JB -9501395 00 CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT SOLARCITY INC., MARKET: MODULES NOR SHALL IT BE DISCLOSED IN WHOLE OR IN RESI TRINA SOLAR PART TO OTHERS OUTSIDE THE RECIPIENT'S ORGANIZATION, EXCEPT IN CONNECTION WITH PROJECT MANAGER: MOUNTING SYSTEM: THE SALE AND USE OF THE RESPECTIVE Comp Mount Type C with Lifter SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PAYMENT TYPE: INVERTER: PERMISSION OF S"CITY INC. PPA I POWER—ONE # AURORA PVI -3.1 PREMISE OWNER: AH,k GRIGNOU, GWENDAL 10232 PASADENA AVE CUPERTINO, CA 95014 156028865 GRIGNOU RESIDENCE 1.715 KW PV Array PAGE NAME: SI TE OUPERTINO Building Department MAR 0 0 2013 REVIEWED FOR CODE COMPLIANCE Reviewed By: "5 r �lftT DESIGN: TBLAU ;5;� ;iol-- II SHEET' REV: DATE: PV 8 3/5/2013 ry aoiarCitj 3055 Clearview Way San Mateo, CA 94402 T:(650) 638-1028 R(650) 638-1029 (888) -SOL -CITY (765-2489) www.solarcity.com Label Location: (AC), (D), (LC) Per Code: CEC 690.8.A.3 & CEC 690.54, NEC Label Location: (AC), (LC) Per Code: CEC 690.17, NEC 690.14 (4) Label Location: (INV), (AC), (LC), (M) Label Location: (CB) Label Location: (POI) Label Location: (CB) Label Location: (POI) Label Location: (DC), (INV) Per Code: CEC 690.53, NEC 690.53 (888) SOL -CITY CUPERTINO r i;; ,ilding Department .4 Label Location:MAR Q 2013 (DC), (INV) Label Location: CAUTION: SOLAR CIRCUIT (C) REvlFrdav��' 0R �.u!�E COMPLIANCE Reviewed By Label Location: (CB), (DC), (INV) Per Code: CEC 690.35.F (AC): AC Disconnect (C): Conduit (CB): Combiner Box (D): Distribution Panel (DC): DC Disconnect (IC): Interior Run Conduit (INV): Inverter With Integrated DC Disconnect (LC): Load Center (M): Utility Meter (POI): Point of Interconnection CONFIDENTIAL - THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR 4�11i!" 3055 Cleaview Way THE BENEFIT OF ANYONE EXCEPT SOLARCITY INC., NOR SHALL IT BE DISCLOSED a- San Mateo, CA 94402 N WHOLE OR IN PART TO OTHERS OUTSIDE S E THE RECIPIENTS ORGANIZATION, Labels ��T:(650)638-1028 F:(650)638-1029 EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE ��OfarC�t 888) -SOL -CITY (765-2489)wwwsolarcty.com SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF SOLARCITY INC. mono multi - -- .. ---------- solutions THnamount • II Iw Trinasolar FOR PITCHED ROOF 10 YEAR PRODUCT WARRANTY FOR MODULE AND MOUNTING SYSTEM 5X FASTER TO INSTALL ULTRA LOW RESISTANCE SUITABLE FOR ® COMPOSITION SHINGLE ® TRAPEZOIDAL METAL ® STANDING SEAM ROOF COMBINING PV MODULE EXPERTISE WITH A HIGHLY INNOVATIVE MOUNTING SYSTEM SOLUTION. Trina Solar is introducing Trinamount - the fastest, easiest and least expensive way to mount PV modules onto residential and commercial rooftops. With a series of drop-in and quarter -turn connections on a specialized module frame, this mounting solution installs up to 5 times faster than conventional mounting systems. Trinamount connects directly to the module frame, eliminating the need for long rails. By drastically reducing the number of parts, cost of materials and installation time, Trinamount offers the optimal solution for residential and commercial installations. Trinamount II FOR PITCHED ROOF TSM-PC05 / PA05.18 mono multi solutions DIMENSIONS OF PV MODULE TSM-PC05 / PA05.18 ELECTRICAL DATA @ STC TSM-225TSM-230 TSM -230 TSM -235 TSM -240 TSM -245 *t� Module dimension PC/PA05.18 PC/PA05.18 PC/PA05.18 PC/PAOS.18 PC/PA05.18 Peak Power Wafts-P-(Wp) 225 230 235 240 245 Power Output Tolerance -P -x (%) 0/+3 0/+3 0/+3 0/+3 0/+3 Maximum Power Voltage -V- (V) 29.4 29.8 30.1 30.4 30.7 Maximum Power Cunent-l- (A) 7.66 7.72 7.81 7.89 7.98 Open Circuit Voltage-Voc (V) 36.9 37.0 37.1 37.2 37.3 Short Circuit Cunent-Isc (A) 8.20 8.26 8.31 8.37 8.47 Module Efficiency rlm %) 13.7 14.1 14.4 14.7 15.0 Values at Standard Test Condifians STC (Air Mass AM 1.5, Irradiance 1 OOOW/m', Cell Temperature 25°C). ELECTRICAL DATA @ NOCT TSM -225 TSM -230 TSM -235 TSM -240 TSM -245 *t� Module dimension PC/PA05.18 PC/PA05.18 PC/PA05.18 PC/PA05.18 PC/PA05.18 Maximum Power (W) 164 168 172 175 178 Maximum Power voltage (V) 26.9 27.1 27.4 27.7 27.8 Maximum Power Current (A) 6.12 6.20 6.27 6.32 6.41 Open Circuit Voltage (V) 33.8 33.9 34.0 34.1 34.2 Short Circuit Current (A) 6.62 6.68 6.70 6.75 6.83 NOCT: Irradiance at 800W/m', Ambient Temperature 20-C. Wind Speed IM/s. MECHANICAL DATA Solar cells Multicrystalline 156 x 156mm (6 inches) l� Cell orientation 60 cells (6 x 10) *t� Module dimension 1650 x 992 x 40mm (64.95 = 39.05 x 1.57 inches) _ 8� ------------------- Weight 20.3kg (44.81b) Glass High transparancy solar glass 3.2mm (0.13 inches) Frome Anodized aluminium alloy _ J -Box IP 65 rated A -A Cables / Connector Photovoltaic Technology cable 4.0mm' (0.006 inches'), 11 00m (43.3 inches), MC4 / H4 I-V CURVES OF PV MODULE TSM-230PCO5 / PA05.18 9°D IOODW/m° _ 8� ------------------- ----------- .___.. TEMPERATURE RATINGS 7° - r eonw/m=------- --- --- - --- -------_ - 6°0 -___-__..._._._-_____ ........ .... Nominal Operating Cell Temperature (NOCT) 46°C (±2°C) Imo... !° V + f r V } p.. 1 :. Sm , __ 400w/mT _ __ _ .._--- -., Temperature Coefficient of PMAx - 0.43%/°C `a i' d i n 9 Department Temperature Coefficient of Voc /CD 2O --- -- -_ - ---._ _ -- - Temperature Coefficient of Isc 0.047%/°C I - --- -- -- I� .. g MAR O S ZOt Om ---------- -Voltage -- - 0°° lOm 2000 3D°° 40" (v) MAXIMUM RATINGS �VIEVVED FOR CODE C IVIPLIANCE Operational Temperature Maximum System Voltage -40-+g5°C 10WV DC(IEC)/ 6WVp Review d m DC(UL) CERTIFICATION Max Series Fuse Rating 15A C E ®1 PV ff 4 SL c us - WARRANTY V fared � I R IM,,w 10 year workmanship warranty 25 year linear performance warranty o (Please refer to product warranty for details) H 011 P4r� Trinasolar Trinasolar `A,° CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT. The power behind the panel eopppt� The power behind the panel 02011 Trina Sola Limited Allhts ' reserved. rg Specifications ircWded in this dalosheet ae subject to chonge without notice. SolarCity SleekMountT"" - Comp The SolarCity SleekMount hardware solution is optimized to achieve superior strength and aesthetics while minimizing roof disruption and labor. The elimination of visible rail ends and mounting clamps, combined with the addition of array trim and a lower profile all contribute to a more visually appealing system. SleekMount utilizes modules with strengthened frames that attach directly to Zep standoffs, effectively eliminating the need for rail and reducing the number of standoffs required. In addition, composition shingles are not required to be cut for this system, allowing for minimal roof disturbance. • Utilizes Zep hardware and Zep compatible modules. • Interlock ETL listed to UL 1703 as ground bond means • Ground Zep UL and ETL listed to UL 467 as grounding and bonding device • Full system listed to UL 2703 for grounding • Galvanized aluminum waterproof flashing • Anodized components for corrosion resistance • Applicable for vent spanning functions Components 5/16" Machine Screw Zep Leveling Foot +� Lag Screw Zep Comp Mount Zep Comp Mount Flashing SolarCity, January 2013 SolarCity SleekMountT"" - Comp i CD 14 SolarCity, January 2013 Installation Instructions 1 Drill Pilot Hole of Proper Diameter for Fastener Size Per NDS Section 1.1.3.2 2 Seal pilot hole with roofing sealant 3 Insert Comp Mount flashing under upper layer of shingle 4 Place Comp Mount centered upon flashing 5 Install lag pursuant to NDS Section 11.1.3 with sealing washer. 6 Secure Leveling Foot to the Comp Mount using machine Screw 7 Place module CUPERTINO I ?uildino Cepartmeni ! MAR 0 7 2013 REVIEVVED FOR CODE COMPLIANCE Reviewed By: `5�,,, t00% power -ONO -11 `JRenewoble Energy Solutions M -3.04L PVI -3.64L PVI -4.24L GENERAL SPECIFICATIONS OUTDOOR MODFIS The most common residential inverter is the ideal size for an average - sized family home. This family of single-phase string inverter complements the typical number of rooftop solar panels, allowing home -owners to get the most efficient energy harvesting for the size of the property. This rugged outdoor inverter has been designed as a completely sealed unit to withstand the harshest environmental conditions. One of the key benefits of the Uno family of single-phase inverters is the dual input section to process two strings with independent MPPT especially useful for rooftop installations with two different orientations (ie East and West). The high speed MPPT offers real-time power tracking and improved energy harvesting. The transformerless operation gives the highest efficiency of up to 97.0%. The wide input voltage range makes the inverter suitable to low power installations with reduced string size. AURORA 11 • Each inverter is set on specific grid codes which can be selected in the field • Single phase output • Dual input sections with independent MPPT, allows optimal energy harvesting from two sub -arrays oriented in different directions • Wide input range • High speed and precise MPPT algorithm for real time power tracking and improved energy harvesting • Flat efficiency curves ensure high efficiency at all output levels ensuring consistent and stable performance across the entire input voltage and output power range • Outdoor enclosure for unrestricted use under any environmental conditions • Integrated DC disconnect switch in compliance with international Standards (-S Version) • RS -485 communication interface (for connection to laptop or datalogger) • Compatible with PVI-RADIOMODULE for wireless communication with Aurora PVI -DESKTOP Maximum Output Power Rated Grid AC Voltage Input Side IDC) Number of Independent MPPT Channels Maximum Usable Power for Each Channel Absolute Maximum Voltage (Vmax) Start -Up Voltage (Vstart) Full Power MPPT Voltage Range Operating MPPT Voltage Range Maximum Current (ldcmax) for both MPPT in Parallel Maximum Usable Current per Channel Maximum Short Circuit Current Limit per Channel Number of Wire Landing Terminals Per Channel Array Wiring Termination Output Side (AC) Grid Connection Type Adjustable Voltage Range (Vmin-Vmax) Grid Frequency Adjustable Grid Frequency Range Maximum Current (lacmax) Power Factor Total Harmonic Distortion At Rated Power Grid Wiring Termination Type Protection Devices Input Reverse Polarity Protection Over -Voltage Protection Type PV Array Ground Fault Detection Output Anti-Islanding Protection Over -Voltage Protection Type Maximum AC OCPD Rating Efficiency Maximum Efficiency CEG Efficiency Operating Performance Stand-by Consumption Night time consumption Communication User -Interface Remote Monitoring (1xRS48S incl.) Wired Local Monitoring (1 xRS48S incl.) Wireless Local Monitoring Environmental Ambient Air Operating Temperature Range Ambient Air Storage Temperature Range Relative Humidity Acoustic Noise Emission Level Maximum Operating Altitude without Derating Mechanical Specifications Enclosure rating Cooling Dimensions (H x W x D) Weight Mounting System Conduit Connections*** W 3000 3300** 3300** 3600 4000** 4000** 4200 4600** 4600** Natural Convection V 208 240 277 208 240 277 208 240 277 <47.3(213)-S version 2 2 2 Wall bracket W 2000 3000 3000 Trade size KOs: (2ea x 1/2") and V 600 600 600 f� (2eax1- 3placessldL;fiont; 'J� Cvl�c V 200 (adj. 120-350) 200 (adj. 120-350) 200 (adj. 120-350) J V 160-530 120-530 140-530 V 0.7xVstart-580 0.7xVstart-580 0.7xVstart-580 A 20 32 32 A 10 16 16 A 12.5 20 20 2 Pairs (1 on -S version) 2 Pairs (1 on -S version) 2 Pairs 0 on -S version) Terminal block, Pressure Clamp, AWG10-AWG4 10/2W Split- 10/2W 10/2W Split- 10/2W 10/2W Split- 10/2W 0/3W 0/3W 0/3W V 183-228 211-264 244304 183-228 211-264 244304 183-228 211-264 244304 Hz 60 60 60 Hz 57-660.5 57-60.5 57-60.5 ARMS 14.5 14.5 12 17.2 16 16 20 20 20 > 0.995 > 0.995 > 0.995 % <2 <2 <2 Terminal block, Pressure Clamp, AWG10-AWG4 Yes Yes Yes Varistor, 2 for each channel Varistor, 2 for each channel Varistor, 2 for each channel Pre start-up Riso and dynamic GFDI (Requires Floating Arrays) Meets UL 1741/IEE1547 Meets UL 1741/IEE1547 Meets UL 1741/IEE1547 requirements requirements requirements Varistor, 2(L,-L,/L,-G) Varistor, 2(L.-L,/L.-G) Varistor, 2(L.-L,/L.-G) A 20 20 15 25 20 20 25 25 25 % 96.9 97 97 % 96 96 96 W., <8 <8 <8 WRMS < 0.6 < 0.6 < 0.6 16 characters x 2lines LCD display AURORA -UNIVERSAL (opt.) PVVUSB-RS485_232 (opt.), PVI -DESKTOP (opt.) PVI -DESKTOP (opt.) with PVI-RADIOMODULE (opt.) -13 to +140 (-25 to +60) with -13 to +140 (-25 to +60) with -13 to +140 (-25 to +60) with F (°q derating above 131 (55) derating above 131 (55) derating above 113 (45) 7 (°q -40 to 176 (40 to +80) -40 to 176 (40 to +80) 40 to 176 (40 to +80) %RH db(A)@lm 0-100 condensing <50 0-100 condensing <50 0-.00-coodensigg: / --LJPERI'INO ft(m) 6560 (2000) 6560 (2000) t'31_I! hf i ('j Dapartment 9 in (mm) Ib/(kg) DC Switch Rating -(Per Contact) AN Safety Isolation Level Safety and EMC Standard Safety Approval Warranty Standard Warranty years Extended Warranty years Available Models Standard - Without DC Switch and Wiring Box With DC Switch and Wiring Box •AII data is subject to change without notice "Capability enabled at nominal AC ,oitage and with sufficient DC power available — When equipped with optional a Switch and Wldng Box NEMA 4X NEMA4X Natural Convection Natural Convection V ectiosi 33.8 x 12.8 x 8.7 (859 x 325 x 222) -S Version _� .°� �p f� MAR <47.3(213)-S version <47.3(21.3)-S version �- < yr.s lz rs1=`ryersibn ' Wall bracket Wall bracket Wall bracket Trade size KOs: (tea x 1/2") and Trade size KOs: (2ea x 1/2") and Tradel�R4 elf and - r (2ea x 1-1/4", 3 places side, front, (2eax1-1/4',3places side, front, f� (2eax1- 3placessldL;fiont; 'J� Cvl�c Ct�hPF%L�ANCE rear) 25/600 rear) 25/600 rear) zs/W_s;jOWnr-d By: J '1 Transformerless (Floating Array) Transformerless (Floating Array) Transformerless (Floating Array) UL 1741, CSA -C22.2N. 107.1-01 UL1741,CSA-C22.2N.107.1-01 UL1741,CSA-C22.2N.107.1-01 .CSAR, .CSAR, CSA�, 10 15&20 PVI-3.0-OUTD-US PVI-3.0-OUTD-S-US 10 15&20 PVI-3.6-OUTD-US PVH3.6-OUTD-S-US 10 15&20 PVI-4.2-OUTD-US PVI-4.2-OUTD-S-US CSA INTERNATIONAL Certificate of Compliance Certificate: 2096477 Project: 2439385 Issued to: Power -One, Inc 740 Calle Plano Camarillo, CA 93012 USA Attention: Robert White Master Contract: 173688 Date Issued: July 19, 2011 The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. Roo- He'KPSt01Ck Issued by: Rob Hempstock, AScT. C us PRODUCTS CLASS 531109 - POWER SUPPLIES - Distributed Generation Power Systems Equipment CLASS 531189 - POWER SUPPLIES - Distributed Generation - Power Systems Equipment - Certified to U.S. Standards Utility Interactive Inverter, Models PVI4.2-OUTD-US, PVI-3.6-OUTD-US, PVI-3.0-OUTD-US, PVI4.2- OUTD-S-US, PVI-3.6-OUTD-S-US, PVI-3.0-OUTD-S-US, PVI4.2-OUTD-US-W, PVI-3.6-OUTD-US-W and PVI-3.0-OUTD-US-W; provided with two DC input channels, permanently connected. For details related to ratings, reference should be made to the CSA Certification Record, Appendix 1 or the Descriptive Report. APPLICABLE REQUIREMENTS CSA -C22.2 No. 107.1-01 - General Use Power Supplies UL Std No. 1741 -Second Edition - Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources (January 28, 2010) DQD 507 Rm 2009-09-01 Pagc: I in ::UPERTINO Buildina Departmeni MAR G 2013 E}I!Ei�'t •: r'�`< GODt COMPLIANCE reviewed By: