Approval SetCase #
Appro%
Appro%
SignatL
CUPERTINC
Case #
Appro,.
Appro,�
SignatL
CUPERTINC
Case #
Appro�
Approx,
SignatL
PREPARED FOR
CUPERTINC
Case #
T.O. (E) BUILDING
ELEV. ±20'-5" (A.G.L.)
FINISHED GRADE
ELEV. 0'-0"
EXISTING SOUTH ELEVATION
T.O. (E) BUILDING
T.O. (P) AT&T PANEL ANTENNAS
(P) T-MOBILE ANTENNA,
(TOTAL-2) BY OTHERS
(P) VERIZON WIRELESS ANTENNA,
(TOTAL-2) BY OTHERS
(P) AT&T PANEL ANTENNAS RAD CENTER
ELEV. 19'-2" (A.G.L.)
FINISHED GRADE
ELEV. 0'-0"
Con munity Development Department
Planning Division — Cupertino
APPROVED
TUP-2020-002
Application Number(s)
i�
2'-0" 6'-0" 6-0"
1 '-01, 1 '-0" o
CV
(E) SECURITY LIGHT, TYP.
(E) BUILDING
(P) AT&T AIR 5331 ANTENNA ON (P)
SADDLE MOUNT BRACKET, (TOTAL-2)
(E) SECURITY LIGHT, TYP.
(P) VERIZON WIRELESS ANTENNA,
(TOTAL-2) BY OTHERS
(E) BUILDING
n
9
24"x36" SCALE: 3/16" = 1'-0"
1 1 %17" SCALE: 3/32" = 1'-0" 4' 2' 0" 4'
NOTE:
SADDLE MOUNT BRACKET ONLY, NOT THE ANTENNAS,
WILL BE PAINTED WITH SHERWIN WILLIAMS COLOR CODE
SW7006 - EXTRA WHITE, TO MATCH THE BUILDING.
��v---' AT&T
5001 EXECUTIVE PKWY,
SAN RAMON CA 94583
Vendor:
rap
)5 INFRASTRUCTURE
P A R T N E R S
1 150 BALLENA BLVD. UNIT 259
ALAMEDA, CA 94501
AT&T Site ID:
CCL04017
DRAWN BY: MM3
CHECKED BY: JF
5
01 /07/ 19
CHANGE ADDRESS
4
12/20/18
ILL COMMENT
3
12/07/18
VZW COMMENT
ILL COMMENT
REVISED 100% ZD
VZW COMMENT
2
12/06/18
1
12/04/ 1$
0
11 /30/18
100% ZD
REV DATE DESCRIPTION
Licensor:
It is a violation of law for any
persons, unless they are acting
under the direction of a
licensed professional engineer,
to alter this document
Issued For:
CCL04017
APPLE CAMPUS -
FORGE 1 BUILDING
18920 FORGE DRIVE
CUPERTINO, CA 95014
Sheet Title:
SOUTH ELEVATIONS
Sheet Number:
Appro,.
Appro,�
SignatL
al B&dy: Director / Staff
al D j' t e 8�20
r03cu 3OU i H cLEVATION
re I tffr Ts
se Manager
24"x36" SCALE: 3/16" = 1'-0"
1 1 %17" SCALE: 3/32" = 1'-0" 4' 2' 0" 4'
A=4
PREPARED FOR
CUPERTINC
Case #
EXISTING WEST ELEVATION
Con munity Development Department
Planning Division — Cupertino
APPROVED
TUP-2020-002
Application Number(s)
/C1 DI III nit\Ir
/D1 T &ArlDll C A KITCf`IKI A
T.O. (E) BUILDING
ELEV. ±20'-5" (A.G.L.)
FINISHED GRADE
ELEV. 0'-0"
24"x36" SCALE: 3/16" = 1'-0"
1 1 %17" SCALE: 3/32" = 1'-0" 4' 2' 0" 4'
NOTE:
SADDLE MOUNT BRACKET ONLY, NOT THE ANTENNAS,
WILL BE PAINTED WITH SHERWIN WILLIAMS COLOR CODE
SW7006 - EXTRA WHITE, TO MATCH THE BUILDING.
T.O. (E) BUILDING
ELEV. ±20'-5" (A.G.L.)
T.O. (P) AT&T PANEL ANTENNAS
ELEV. 20'-2" (A.G.L.)
_ (P) AT&T PANEL ANTENNAS RAD CENTER
ELEV. 19'-2'' (A.G.L.)
FINISHED GRADE
ELEV. 0'-0"
��v---' AT&T
5001 EXECUTIVE PKWY,
SAN RAMON CA 94583
Vendor:
rap
)5 INFRASTRUCTURE
P A R T N E R S
1 150 BALLENA BLVD. UNIT 259
ALAMEDA, CA 94501
AT&T Site ID:
CCL04017
DRAWN BY: MM3
CHECKED BY: JF
5
01 /07/ 19
CHANGE ADDRESS
4
12/20/18
ILL COMMENT
3
12/07/18
VZW COMMENT
ILL COMMENT
REVISED 100% ZD
VZW COMMENT
2
12/06/18
1
12/04/ 1$
0
11 /30/18
100% ZD
REV
DATE DESCRIPTION
Licensor:
It is a violation of law for any
persons, unless they are acting
under the direction of a
licensed professional engineer,
to alter this document
Issued For:
CCL04017
APPLE CAMPUS -
FORGE 1 BUILDING
18920 FORGE DRIVE
CUPERTINO, CA 95014
Sheet Title:
WEST
ELEVATIONS
Sheet Number:
Appro,.
Appro,�
SignatL
al B&dy: Director / Staff
al A t e /69,(Q8/20
re
se Manager
ATIO N
24"x36" SCALE: 3/16" = 1'-0"
1 1 %17" SCALE: 3/32" = 1'-0" 4' 2' 0" 4'
A=5
CUPERTINC
Case #
Appro,.
Appro,�
SignatL
Con
CUPERTINO
Case #
Approva I B
Approva I D
Signature
PREPARED FOR
AT&T
5001 EXECUTIVE PKWY,
SAN RAMON CA 94583
Vendor:
rem
INFRASTRUCTURE
P A R T N E R 5
1 150 BALLENA BLVD. UNIT 259
ALAMEDA, CA 94501
AT&T Site ID:
CCL04017
DRAWN BY: MM3
CHECKED BY: JF
1-1
__j
ell-
5
01 /07/ 19
CHANGE ADDRESS
4
12/20/18
ILL COMMENT
3
12/07/18
12/06/18
12/04/1$
VZW COMMENT
ILL COMMENT
REVISED 100% ZD
VZW COMMENT
2
1
0 1 1 /30/18 100% ZD
REV DATE DESCRIPTION
Licensor:
munity Development Department
Planning Division — Cupertino
APPROVED
TUP-2020-002
ApplicationNumber(s)
dy: Director / Staff
to 09/08/20
Jeffrey Tsumura
Case Manager
SPECIFICATIONS:
MFG / MODEL / PORT: ERICSSON / AIR 5331
DIMENSIONS: 23.6" H X 1 1.8'' W X
WEIGHT: 28.7 LBS (W/O MOUNTING
W
MECHANICAL
DOWNTILT
BRACKET
= ANTENNA
SUPPORT PIPE
_
FRONT SIDE
1 ANTENNA SPECIFICATION
N.T.S.
KIT)
PERSPECTIVE
/ 4-PORT
3.5'' D
It is a violation of law for any
persons, unless they are acting
under the direction of a
licensed professional engineer,
to alter this document
D
Issued For:
CCL04017
APPLE CAMPUS -
FORGE 1 BUILDING
18920 FORGE DRIVE
CUPERTINO, CA 95014
Sheet Title:
DETAILS
Sheet Number:
D=1
GENERAL CONSTRUCTION NOTES:
ABBREVIATIONS:
PREPARED FOR
1.
PLANS ARE INTENDED TO BE DIAGRAMMATIC OUTLINE ONLY, UNLESS NOTED OTHERWISE. THE WORK SHALL INCLUDE FURNISHING MATERIALS, EQUIPMENT,
A.B.
ANCHOR BOLT
FDN.
FOUNDATION
SCH.
SCHEDULE
APPURTENANCES AND LABOR NECESSARY TO COMPLETE ALL INSTALLATIONS AS INDICATED ON THE DRAWINGS.
ABV.
ABOVE
F.O.C.
FACE OF CONCRETE
SHT.
SHEET
ACCA
ANTENNA CABLE COVER ASSEMBLY
F.O.M.
FACE OF MASONRY
SIM.
SIMILAR
2.
THE CONTRACTOR SHALL OBTAIN, IN WRITING, AUTHORIZATION TO PROCEED BEFORE STARTING WORK ON ANY ITEM NOT CLEARLY DEFINED OR IDENTIFIED BY
ADD'L
ADDITIONAL
F.O.S.
FACE OF STUD
SPEC.
SPECIFICATIONS
THE CONTRACT DOCUMENTS.
A.F.F.
ABOVE FINISHED FLOOR
F.O.W.
FACE OF WALL
SQ.
SQUARE
A.F.G.
ABOVE FINISHED GRADE
F.S.
FINISH SURFACE
S.S.
STAINLESS STEEL
3.
CONTRACTOR SHALL CONTACT USA (UNDERGROUND SERVICE ALERT) AT (800) 227-2600, FOR UTILITY LOCATIONS, 48 HOURS BEFORE PROCEEDING WITH ANY
ALUM.
ALUMINUM
FT.(' )
FOOT (FEET)
STD.
STANDARD
EXCAVATION, SITE WORK OR CONSTRUCTION.
ALT.
ALTERNATE
FTG.
FOOTING
STL.
STEEL
ANT.
ANTENNA
G.
GROWTH (CABINET)
STRUC.
STRUCTURAL
4.
THE CONTRACTOR SHALL INSTALL ALL EQUIPMENT AND MATERIALS IN ACCORDANCE WITH MANUFACTURER'S RECOMMENDATIONS UNLESS SPECIFICALLY
APPRX.
APPROXIMATE(LY)
GA.
GAUGE
TEMP.
TEMPORARY
INDICATED OTHERWISE, OR WHERE LOCAL CODES OR REGULATIONS TAKE PRECEDENCE.
ARCH.
ARCHITECT(URAL)
GI.
GALVANIZE(D)
THK.
THICK(NESS)
AWG.
AMERICAN WIRE GAUGE
G.F.I.
GROUND FAULT CIRCUIT
T.N.
TOE NAIL
5.
ALL CONSTRUCTION SHALL BE IN ACCORDANCE WITH THE CBC / UBC'S REQUIREMENTS REGARDING EARTHQUAKE RESISTANCE, FOR, BUT NOT LIMITED TO,
BLDG.
BUILDING
INTERRUPTER
T.O.A.
TOP OF ANTENNA
PIPING, LIGHT FIXTURES, CEILING GRID, INTERIOR PARTITIONS, AND MECHANICAL EQUIPMENT. ALL WORK MUST COMPLY WITH LOCAL EARTHQUAKE CODES
BILK.
BLOCK
GLB. (GLU-LAM)
GLUE LAMINATED BEAM
T.O.C.
TOP OF CURB
BLKG.
BLOCKING
GPS
GLOBAL POSITIONING SYSTEM
T.O.F.
TOP OF FOUNDATION
AND REGULATIONS.
BM.
BEAM
GRND.
GROUND
T.O.P.
TOP OF PLATE (PARAPET)
6.
REPRESENTATIONS OF TRUE NORTH, OTHER THAN THOSE FOUND ON THE PLOT OF SURVEY DRAWINGS, SHALL NOT BE USED TO IDENTIFY OR ESTABLISH BEARING
B.N.
BOUNDARY NAILING
HDR.
HEADER
T.O.S.
TOP OF STEEL
BTCW.
BARE TINNED COPPER WIRE
HGR.
HANGER
T.O.W.
TOP OF WALL
OF TRUE NORTH AT THE SITE. THE CONTRACTOR SHALL RELY SOLELY ON THE PLOT OF SURVEY DRAWING AND ANY SURVEYOR'S MARKINGS AT THE SITE FOR THE
B.O.F.
BOTTOM OF FOOTING
HT.
HEIGHT
TYP.
TYPICAL
ESTABLISHMENT OF TRUE NORTH, AND SHALL NOTIFY THE ARCHITECT / ENGINEER PRIOR TO PROCEEDING WITH THE WORK IF ANY DISCREPANCY IS FOUND
B/U
BACK-UP CABINET
ICGB.
ISOLATED COPPER GROUND BUS
U.G.
UNDER GROUND
CAB.
CABINET
IN. (")
INCH(ES)
U.L.
UNDERWRITERS LABORATORY
BETWEEN THE VARIOUS ELEMENTS OF THE WORKING DRAWINGS AND THE TRUE NORTH ORIENTATION AS DEPICTED ON THE CIVIL SURVEY. THE CONTRACTOR
CANT.
CANTILEVER(ED)
INT.
INTERIOR
U.N.O.
UNLESS NOTED OTHERWISE
SHALL ASSUME SOLE LIABILITY FOR ANY FAILURE TO NOTIFY THE ARCHITECT / ENGINEER.
C.I.P.
CAST IN PLACE
LB.(#)
POUND(S)
V.I.F.
VERIFY IN FIELD
CLG.
CEILING
L.B.
LAG BOLTS
W
WIDE (WIDTH)
7.
THE BUILDING DEPARTMENT ISSUING THE PERMITS SHALL BE NOTIFIED AT LEAST TWO WORKING DAYS PRIOR TO THE COMMENCEMENT OF WORK, OR AS
CLR.
CLEAR
L.F.
LINEAR FEET (FOOT)
w/
WITH
OTHERWISE STIPULATED BY THE CODE ENFORCEMENT OFFICIAL HAVING JURISDICTION.
COL.
COLUMN
L.
LONG(ITUDINAL)
WD.
WOOD
CONC.
CONCRETE
MAS.
MASONRY
W.P.
WEATHERPROOF
8.
DO NOT EXCAVATE OR DISTURB BEYOND THE PROPERTY LINES OR LEASE LINES, UNLESS OTHERWISE NOTED.
CONN.
CONNECTION(OR)
MAX.
MAXIMUM
WT.
WEIGHT
9.
ALL EXISTING UTILITIES, FACILITIES, CONDITIONS, AND THEIR DIMENSIONS SHOWN ON THE PLAN HAVE BEEN PLOTTED FROM AVAILABLE RECORDS. THE
CONST.
CONSTRUCTION
M.B.
MACHINE BOLT
(t
CENTERLINE
CONT.
CONTINUOUS
MECH.
MECHANICAL
P
PLATE, PROPERTY LINE
ARCHITECT / ENGINEER AND THE OWNER ASSUME NO RESPONSIBILITY WHATSOEVER AS TO THE SUFFICIENCY OR THE ACCURACY OF THE INFORMATION
d
PENNY (NAILS)
MFR.
MANUFACTURER
SHOWN ON THE PLANS, OR THE MANNER OF THEIR REMOVAL OR ADJUSTMENT. CONTRACTORS SHALL BE RESPONSIBLE FOR DETERMINING EXACT LOCATION
DBL.
DOUBLE
MIN.
MINIMUM
DEPT.
DEPARTMENT
MISC.
MISCELLANEOUS
OF ALL EXISTING UTILITIES AND FACILITIES PRIOR TO START OF CONSTRUCTION. CONTRACTORS SHALL ALSO OBTAIN FROM EACH UTILITY COMPANY DETAILED
D.F.
DOUGLAS FIR
MTL.
METAL
DIA.
DIAMETER
(N)
NEW
INFORMATION RELATIVE TO WORKING SCHEDULES AND METHODS OF REMOVING OR ADJUSTING EXISTING UTILITIES.
DIAG.
DIAGONAL
NO.(#)
NUMBER
10.
CONTRACTOR SHALL VERIFY ALL EXISTING UTILITIES, BOTH HORIZONTAL AND VERTICALLY, PRIOR TO THE START OF CONSTRUCTION. ANY DISCREPANCIES OR
DIM.
DIMENSION
N.T.S.
NOT TO SCALE
DWG.
DRAWING(S)
O.C.
ON CENTER
DOUBTS AS TO THE INTERPRETATION OF PLANS SHOULD BE IMMEDIATELY REPORTED TO THE ARCHITECT / ENGINEER FOR RESOLUTION AND INSTRUCTION, AND
DWL.
DOWEL(S)
OPNG.
OPENING
NO FURTHER WORK SHALL BE PERFORMED UNTIL THE DISCREPANCY IS CHECKED AND CORRECTED BY THE ARCHITECT / ENGINEER. FAILURE TO SECURE SUCH
EA.
EACH
P/C
PRECAST CONCRETE
EL.
ELEVATION
PCs
PERSONAL COMMUNICATION
INSTRUCTION MEANS CONTRACTOR WILL HAVE WORKED AT HIS/HER OWN RISK AND EXPENSE.
ELEC.
ELECTRICAL
SERVICES
1 1 .
ALL NEW AND EXISTING UTILITY STRUCTURES ON SITE AND IN AREAS TO BE DISTURBED BY CONSTRUCTION SHALL BE ADJUSTED TO FINISH ELEVATIONS PRIOR TO
ELEV.
ELEVATOR
PLY.
PLYWOOD
EMT.
ELECTRICAL METALLIC TUBING
PPC
POWER PROTECTION CABINET
FINAL INSPECTION OF WORK.
E. N.
EDGE NAIL
PRC
PRIMARY RADIO CABINET
12.
ANY DRAIN AND/OR FIELD TILE ENCOUNTERED / DISTURBED DURING CONSTRUCTION SHALL BE RETURNED TO IT'S ORIGINAL CONDITION PRIOR TO
ENG.
ENGINEER
P.S.F.
POUNDS PER SQUARE FOOT
EQ.
EQUAL
P.S.I.
POUNDS PER SQUARE INCH
COMPLETION OF WORK. SIZE, LOCATION AND TYPE OF ANY UNDERGROUND UTILITIES OR IMPROVEMENTS SHALL BE ACCURATELY NOTED AND PLACED ON
EXP.
EXPANSION
P.T.
PRESSURE TREATED
"AS -BUILT'' DRAWINGS BY GENERAL CONTRACTOR, AND ISSUED TO THE ARCHITECT / ENGINEER AT COMPLETION OF PROJECT.
EXST.(E)
EXISTING
PWR.
POWER (CABINET)
EXT.
EXTERIOR
QTY.
QUANTITY
13.
ALL TEMPORARY EXCAVATIONS FOR THE INSTALLATION OF FOUNDATIONS, UTILITIES, ETC., SHALL BE PROPERLY LAID BACK OR BRACED IN ACCORDANCE WITH
FAB.
FABRICATION(OR)
RAID. (R)
RADIUS
CORRECT OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) REQUIREMENTS.
F. F.
FINISH FLOOR
REF.
REFERENCE
F.G.
FINISH GRADE
REINF.
REIN FORCEMENT(ING)
14.
INCLUDE MISC. ITEMS PER AT&T SPECIFICATIONS
FIN.
FINISH(ED)
REQ'D/
REQUIRED
FLR.
FLOOR
RGS.
RIGID GALVANIZED STEEL
SYMBOLS LEGEND:
APPLICABLE CODES, REGULATIONS AND STANDARDS:
1. SUBCONTRACTOR'S WORK SHALL COMPLY WITH ALL APPLICABLE NATIONAL, STATE, AND LOCAL CODES AS ADOPTED BY THE LOCAL AUTHORITY HAVING JURISDICTION
(AHJ) FOR THE LOCATION.
2. THE
EDITION OF THE AHJ ADOPTED CODES AND STANDARDS IN EFFECT ON THE DATE OF CONTRACT AWARD SHALL GOVERN THE DESIGN.
3. SUBCONTRACTOR'S WORK SHALL COMPLY WITH THE LATEST EDITION OF THE FOLLOWING STANDARDS:
3.1.
AMERICAN CONCRETE INSTITUTE (ACI) 318, BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE
3.2.
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC), MANUAL OF STEEL CONSTRUCTION, ASD, NINTH EDITION
3.3.
TELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA) 222-G, STRUCTURAL STANDARD FOR STRUCTURAL ANTENNA TOWER AND ANTENNA SUPPORTING STRUCTURES
3.4.
INSTITUTE FOR ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE) 81, GUIDE FOR MEASURING EARTH RESISTIVITY, GROUND IMPEDANCE, AND EARTH SURFACE
POTENTIALS OF A GROUND SYSTEM IEEE 1 100 (1999) RECOMMENDED PRACTICE FOR POWERING AND GROUNDING OF ELECTRICAL EQUIPMENT.
3.5.
IEEE C62.41, RECOMMENDED PRACTICES ON SURGE VOLTAGES IN LOW VOLTAGE AC POWER CIRCUITS (FOR LOCATION CATEGORY "C3" AND''HIGH SYSTEM
EXPOSURE'')
3.6.
TIA 607 COMMERCIAL BUILDING GROUNDING AND BONDING REQUIREMENTS FOR TELECOMMUNICATIONS TELCORDIA GR-63 NETWORK
3.7.
EQUIPMENT -BUILDING SYSTEM (NEBS): PHYSICAL PROTECTION
3.8.
TELCORDIA GR-347 CENTRAL OFFICE POWER WIRING
3.9.
TELCORDIA GR-1275 GENERAL INSTALLATION REQUIREMENTS
3.10.
TELCORDIA GR-1503 COAXIAL CABLE CONNECTIONS
3.1 1 .
ANY AND ALL OTHER LOCAL & STATE LAWS AND REGULATIONS
3.12.
FOR ANY CONFLICTS BETWEEN SECTIONS OF LISTED CODES AND STANDARDS REGARDING MATERIAL, METHODS OF CONSTRUCTION, OR OTHER REQUIREMENTS,
Co
munity Development
H E MtmOST RESTRICTIVE SHALL GOVERN. WHERE THERE IS CONFLICT BETWEEN A GENERAL REQUIREMENT AND A SPECIFIC REQUIREMENT, THE SPECIFIC REQUIREMENT
D
Planning Division — Cul$WihloGOVERN.
CUPERTINO
APPROVED
Case #
TUP-2020-002
Application Numbers)
Approva I BI
dy: Director / Staff
Approval Date
09/08/20
Signature
Jeffrey Tsumura
Case Manager
1 1
A5
A-31C
D5
Cl
A 3
A4 C4
A-113 A-113
Al
A- 3
BLDG. SECTION
WALL SECTION
DETAIL
ELEVATION
DOOR SYMBOL
WINDOW SYMBOL
TILT -UP PANEL MARK
PROPERTY LINE
CENTERLINE
+0
ELEVATION DATUM
A
GRID/COLUMN LINE
KEYNOTE, DIMENSION ITEM
KEYNOTE, CONSTRUCTION ITEM
r r WALL TYPE MARK
OFFICE
101
ROOM NAME
ROOM NUMBER
a
OH
Tel
Pwr
Coax
0
MEW
GROUT OR PLASTER
(E) BRICK
(E) MASONRY
CONCRETE
EARTH
GRAVEL
PLYWOOD
SAND
PLYWOOD
SAND
(E) STEEL
MATCH LINE
GROUND CONDUCTOR
OVERHEAD SERVICE CONDUCTORS
TELEPHONE CONDUIT
POWER CONDUIT
COAXIAL CABLE
CHAIN LINK FENCE
WOOD FENCE
(P) ANTENNA
(P) RRU
(P) DC SURGE SUPPRESSION
(F) ANTENNA
(F) RRU
(E) EQUIPMENT
AT&T
5001 EXECUTIVE PKWY,
SAN RAMON CA 94583
r
Vendor:
151NFRASTRUCTURE
P A R T N E R 5
1 150 BALLENA BLVD. UNIT 259
ALAMEDA, CA 94501
AT&T Site ID:
CCL04017
DRAWN BY: MM3
CHECKED BY: JF
5
01 /07/ 19
CHANGE ADDRESS
4
12/20/18
ILL COMMENT
3
12/07/18
12/06/18
12/04/1$
VZW COMMENT
ILL COMMENT
REVISED 100% ZD
VZW COMMENT
2
1
0 1 1 /30/18 100% ZD
REV DATE DESCRIPTION
Licensor:
It is a violation of law for any
persons, unless they are acting
under the direction of a
licensed professional engineer,
to alter this document
r
Issued For:
CCL04017
APPLE CAMPUS -
FORGE 1 BUILDING
18920 FORGE DRIVE
CUPERTINO, CA 95014
r
Sheet Title:
GENERAL NOTES
r
Sheet Number:
GN=1
CUPERTINC
Case #
Appro�
Approx,
SignatU
0 0
AT&T
This Site Operated by:
ATEtT MOBILITY
2600 CAMINO RAMON, 4W750FF
SAN RAMON, CA 94583
IN CASE OF FIRE AND THE NEED FOR SHUTDOWN
TO DEACTIVATE ANTENNAS CALL THE
FOLLOWING NUMBER:
For 24 Hour Emergency Contact and Access Please Call:
(800)832-6662
Reference Site#: CCL04017
Site Address: 18920 FORGE DRIVE CUPERTINO, CA 95014
0 O
FENCED COMPOUND SIGNAGE
N.T.S.
DANGER
FENCED COMPOUND SIGNAGE
N.T.S.
NOTICE
AUTHORIZED
PERSONNEL
ONLY
DOOR / EQUIPMENT SIGN
N.T.S.
3
Co munity Development Depart ent
Planning Division — Cupertino
APPROVED
TUP-2020-002
Application Number(s)
a I B dy: Director / Staff
a I D ty ire Je7ev 1s , „ ." QM .
ACID
2
INFORMATION
Federal Communications Communication
Tower Registration Number
1 2 3 4 5 6 7
Posted in accordance with federal Communications
Commission rules and antenna tower registration
0 47CFR 17.4(g). 0
12"
FCC ASR SIGNAGE
N.T.S.
Property of AT&T
Authorized
Personnel Only
No Trespassing
Violators will be Prosecuted
In case of emergency, or prior to performing
maintenance on this site, call
and reference cell site number
GATE SIGNAGE
N.T.S.
Property of AT&T
Authorized
Personnel Only
In case of emergency, or prior to performing
maintenance on this site, call
and reference cell site number
SHELTER / CABINET DOORS SIGNAGE
N.T.S.
12"
8"
INFORMATION
AT&T M031UTY OPERATES TELECONMUNICAT 0N ANTENNAS ATTI IIS
LOCATION. REMAIN AT LEAST 3 FEET AWAY FROM ANY ANTENNA AND OBEY
ALL POSTED SIGNS.
CO NTACT TH E OWN E R (S1 O F TH E ANTEN NA (S ) BEFO RE W O RKI N G CLOS ER
-HAN 3 FEET FROM THE ANTENNA(S1
CONTACTAT8 MOBILITY AT 8CC,638-2822 PRIOR TO P ER FO R MI N G ANY
MNNTENANCE OR REPAIRS NEAR AT&T MOBILITY ANTEN NAS.
THIS IS SITE #
CONTACT THE MANAGEMENT OFFICE IF THIS DOOR/HATCH/GATE
IS FOUND UNLOCKED.
NFORMACIO
EN ESTA PROPIEDAD SE UBICAN ANTENAS DE TELECOMUVICACIONES
OPERADAS FOR AT&T. FAVOR MANTENER JNA DISTANCIA DE NO N ENOS DE 3
PIES Y OBEDECER TO DOS LOS AVIS OS.
CON IUNIQUESE CON EL PROP ILIARI0 O LOS'ROPIE ABIOS DE ?,S ANIENAS
ANTES DE TRABAJAR O CAM INAR DE MENOS DE 3 PIES DE LA ANTENA.
COMUNIOUESE CON AT8 MOBILITY8CO-638-2822 ANTES DE REALIZAR
CUAI OUIFR MANTFNIMIFNTO O RFPARACION DF I AS ANT=NAS DF AT&T
MOBILITY.
ESTA ES LA E5TACION BASE NIIMERO
FAVOR COMINUCARSE CON LA OFICINA DE LAADMINISTRACION DEL EDIFICIO
SI ESTA PUENTA 0 COMPUERTA SE ENCUENTRA 51N CAN DADO.
INFORMATION SIGN 1-1
h
SCALE: 1 /2"= 1'
7"
5"
INFORMATION
ACTIVE ANTENNAS ARE MOUNTED
❑ ON THE OUTSIDE FACE OF THIS BUILDING
❑ INFORMATION SIGN 1-2
❑ ON THIS STRUCTURE
STAY BACK A MINIMUM OF 3 FEET
FROM THESE ANTENNAS
CONTACT AT&T MOBILITY AT 800-638-2822 &
FOLLOW THEIR INSTRUCTIONS PRIOR TO
PERFORMING ANY MAINTENANCE OR
REPAIRS CLOSER THAN 3 FEET FROM THE
ANTENNAS.
THIS IS AT&T MOBILITY SITE
1. CONTRACTOR SHALL INSTALL ALL INFORMATION SIGNAGE IN
ACCORDANCE w/ AT&T WIRELESS DOCUMENT #03-0074, RF
EXPOSURE POLICY AND RF SAFETY COMPLIANCE PROGRAM, LATEST
EDITION.
2. FABRICATION:
*SIGN 1-1: ENTRANCE DOOR, SEE DETAIL 1 A, THIS SHEET
SIGN 1 IS TO BE MADE ON THE 50 MIL ALUMINUM SHEETING (SIZE 8
INCHES BY 12 INCHES) w/ FOUR (4) 4 INCH MOUNTING HOLES, ONE
EACH CORNER OF THE SIGN FOR MOUNTING w/ HARDWARE w/ TIE
WRAPS. THE MAIN BACKGROUND COLOR IS TO BE WHITE FRONT &
BACK w/ BLACK LETTERING.
THE INFORMATION BAND SHALL BE 1.2 INCH SOLID GREEN BAND w.
0.5 INCH HIGH BLACK LETTERING. THE BODY TEXT SHALL BE IN BLACK
LETTERING w/0.2 INCH HIGH LETTERS. THE REF LINE SHALL BE IN $ INCH
LETTERS.
THE PLACEMENT OF TEXT SHALL BE DONE IN A MANNER THAT WILL
PERMIT EASY READING FROM A DISTANCE OF APPROXIMATELY 6 FEET
IN FRONT OF THE SIGN.
INFORMATION SIGNAGE
N.T.S.
INFORMATION SIGN 1-2
SCALE: 3/4" = 1'
�2���
INFORMATION SIGN 1-3
SCALE: 1 /4" = 1'
S
T
A
Y
B
A
K
3
F
E
E
T
F
R
O
M
A
N
T
E
N
N
A
1-1/2"
24"
INFORMATION SIGN 1-4
SCALE: 3/16" = 1'
ALL PAINT WILL BE BAKED w/ENAMEL w/ UV PROTECTIVE COATING
OVER THE FACE OF THE SIGN.
*SIGN 1-2: POLE, SEE DETAIL 1 B, THIS SHEET
SIGN 2 MUST BE A NON METALLIC LABEL w/ AN ADHESIVE BACKING,
THE LABEL SHALL BE MADE USING VINYL OR SIMILAR WEATHERPROOF
MATERIAL. THE LABEL SHALL BE APPROXIMATELY 5X7 INCHES w/ A
WHITE BACKGROUND AND BLACK LETTERING. THE GREEN BAND
SHALL BE 1.375 INCH IN HEIGHT & THE LETTERING SHALL BE BLACK w/
0.75 INCH HIGH LETTERS. THE TEXT LETTERING SHALL BE BLACK w/' INCH
HIGH LETTERS. UV PROTECTION SHALL BE PLACED OVER THE FRONT OF
THE LABEL.
*SIGN 1-3: BACK OF ANTENNAS, SEE DETAIL 1 C & 3, THIS SHEET
*SIGN 3 IS A 1 INCH X 2 INCH PANEL THAT CAN BE APPLIED TO THE
BACK OR SI DE OF AN ANTEN NA TO I DENTI FY IT AS AN AT&T ANTEN NA.
*SIGN 1-4: SIDE OF ANTENNAS, SEE DETAIL 1 D & 3, THIS SHEET
SIGN 4 IS MADE FROM TRANSPARENT MATERIAL 1-1 /2 INCHES WIDE &
24 INCHES LONG. THE LETTERING IS TO BE BLACK w 2 INCH LETTERING IN
A VERTICAL COLUMN. THE SPACING BETWEEN WORDS MUST BE SUCH
THAT IT IS EASILY READ & FILLS THE LENGTH OF THE SIGN.
NOTE:
1. CONTRACTOR SHALL INSTALL ALL INFORMATION SIGNAGE IN
ACCORDANCE w/ AT&T WIRELESS DOCUMENT #03-0074, RF EXPOSURE
POLICY AND RF SAFETY COMPLIANCE PROGRAM, LATEST EDITION.
2. CONTRACTOR SHALL CONTACT AT&T R-RFSC FOR INFORMATION ON
MPE LEVELS AND INSTRUCTIONS ON LEVEL AND LOCATION OF SIGNAGE
WARNINGS
Beyond This Pointyou are
entering a controlled area where
RF Emissions exceed the FCC
Controlled Exposure limits
Failure to obey all posted signs and site
guidelines could result in serious injury
Ref: FCC 47CFR 1 .1307(b)
WARNING, CAUTION AND NOTICE SIGN
N.T.S.
CAUTION
Beyond This Pointyou are
entering a controlled area
where RF Emissions may exceed
the FCC Controlled Exposure
limits
Obey all posted signs and site guidelines
for working in an RF environment
Ref: FCC 47CFR 1.1307(b) at&t
NOTICE
Beyond This Pointyou are
entering an area where RF
Emissions may exceed the FCC
General Population Exposure
Limits
Follow all posted signs and site guidelines for
working in an RF environment
Ref: FCC 47CFR 1 .1307(b) at&t
SIGNAGE AND STRIPING INFORMATION
1. THE FOLLOWING INFORMATION IS A GUIDELINE w/ RESPECT
TO PREVAILING STANDARDS LIMITING HUMAN EXPOSURE TO
RADIO FREQUENCY ENERGY AND SHOULD BE USED AS
SUCH. IF THE SITE'S EMF REPORT OR ANY LOCAL, STATE OR
FEDERAL GUIDELINES OR REGULATIONS SHOULD BE IN
CONFLICT w/ ANY PART OF THESE NOTES OR PLANS, THE
MORE RESTRICTIVE GUIDELINE OR REGULATION SHALL BE
FOLLOWED AND OVERRIDE THE LESSER.
2. THE PUBLIC LIMIT OF RF EXPOSURE ALLOWED BY AT&T IS
1 mWcm*2 AND THE OCCUPATIONAL LIMIT OF RF EXPOSURE
ALLOWED BY AT&T IS 5mWcm*2
3. IF THE BOTTOM OF THE ANTENNA IS MOUNTED (8) EIGHT FEET
ABOVE THE GROUND OR WORKING PLATFORM LINE OF THE
PERSONAL COMMUNICATION SYSTEM (PCS) AND DOES NOT
EXCEED THE PUBLIC LIMIT OF RF EXPOSURE LIMIT THEN NO
STRIPING OR BARRICADES SHOULD BE NEEDED.
4. IF THE PUBLIC LIMIT OF RF EXPOSURE ON THE SITE IS
EXCEEDED AND THE AREA IS PUBLICLY ACCESSIBLE (e.g.
ROOF ACCESS DOOR THAT CANNOT BE LOCKED, OR FIRE
EGRESS) THEN BOTH BARRICADES AND STRIPING SHALL BE
PLACED AROUND THE ANTENNAS. THE EXACT EXTENT OF THE
BARRICADES AND STRIPING SHALL BE DETERMINED BY THE
EMF REPORT FOR THE SITE DONE BEFORE OR SHORTLY AFTER
COMPLETION OF SITE CONSTRUCTION. USE THE PLANS AS A
GUIDELINE FOR PLACEMENT OF SUCH BARRICADES AND
STRIPING.
5. IF THE PUBLIC LIMIT OF RF EXPOSURE ON THE SITE IS
EXCEEDED AND THE AREA IS PUBLICLY ACCESSIBLE (e.g.
ROOF ACCESS DOOR THAT CANNOT BE LOCKED, OR FIRE
EGRESS) THEN BOTH BARRICADES AND STRIPING SHALL BE
PLACED AROUND THE ANTENNAS. THE EXACT EXTENT OF THE
BARRICADES AND STRIPING SHALL BE PLACED AROUND THE
ANTENNAS. THE EXACT EXTENT OF THE BARRICADES &
STRIPING SHALL BE DETERMINED BY THE EMF REPORT FOR THE
SITE DONE BEFORE OR SHORTLY AFTER COMPLETION OF SITE
CONSTRUCTION. USE THE PLANS AS A GUIDELINE FOR
PLACEMENT OF SUCH BARRICADES AND STRIPING.
6. ALL TRANSMIT ANTENNAS REQUIRE A THREE LANGUAGE
WARNING SIGN WRITTEN IN ENGLISH, SPANISH, AND
CHINESE. THIS SIGN SHALL BE PROVIDED TO THE
CONTRACTOR Y THE AT&T CONSTRUCTION PROJECT
MANAGER AT THE TIME OF CONSTRUCTION. THE LARGER
SIGN SHALL BE PLACED IN PLAIN SIGHT AT ALL ROOF
ACCESS LOCATIONS AND ON ALL BARRICADES. THE
SMALLER SIGN SHALL BE PLACED ON THE ANTENNA
ENCLOSURES IN A MANNER THAT IS EASILY SEEN BY ANY
PERSON ON THE ROOF. WARNING SIGNS SHALL COMPLY w/
ANSI C95.2 COLOR, SYMBOL, AND CONTENT
CONVENTIONS. ALL SIGNS SHALL HAVE AT&T'S NAME AND
THE COMPANY CONTACT INFORMATION (e.g. TELEPHONE
NUMBER) TO ARRANGE FOR ACCESS TO THE RESTRICTED
AREAS. THIS TELEPHONE NUMBER SHALL BE PROVIDED TO THE
CONTRACTOR BY THE AT&T CONSTRUCTION PROJECT
MANAGER AT THE TIME OF CONSTRUCTION.
7. PHOTOS OF ALL STRIPING, BARRICADES & SIGNAGE SHALL
BE PART OF THE CONTRACTORS CLOSE OUT PACKAGE &
SHALL BE TURNED INTO THE AT&T CONSTRUCTION PACKAGE
& SHALL BE TURNED INTO THE AT&T CONSTRUCTION
PROJECT MANAGER AT THE END OF CONSTRUCTION.
STRIPING SHALL BE DONE w/ FADE RESISTANT YELLOW
SAFETY PAINT IN A CROSS -HATCH PATTERN AS DETAILED BY
THE CONSTRUCTION DRAWINGS. ALL BARRICADES SHALL BE
MADE OF AN RF FRIENDLY MATERIAL SO AS NOT TO BLOCK
OR INTERFERE w/ THE OPERATION OF THE ANTENNAS.
BARRICADES SHALL BE PAINTED w/ FADE RESTRAINT YELLOW
SAFETY PAINT. THE CONTRACTOR SHALL PROVIDE ALL RF
FRIENDLY BARRICADES NEEDED, & SHALL PROVIDE THE AT&T
CONSTRUCTION PROJECT MANAGER w/ A DETAILED SHOP
DRAWING OF EACH BARRICADE. UPON CONSTRUCTION
COMPLETION.
GENERAL NOTES
N.T.S.
PREPARED FOR
AT&T
5001 EXECUTIVE PKWY,
SAN RAMON CA 94583
raold
)51NFRASTRUCTURE
P A R T N E R 5
1 150 BALLENA BLVD. UNIT 259
ALAMEDA, CA 94501
AT&T Site ID:
CCL04017
DRAWN BY: MM3
CHECKED BY: JF
5
01 /07/ 19
CHANGE ADDRESS
4
12/20/18
LL COMMENT
3
12/07/18
VZW COMMENT
2
12/06/18
LL COMMENT
1
12/04/ 18
REVISED 100% ZD
VZW COMMENT
0
1 1 /30/18
100% ZD
REV
DATE
DESCRIPTION
Licensor:
It is a violation of law for any
persons, unless they are acting
under the direction of a
licensed professional engineer,
to alter this document
issued For:
CCL04017
APPLE CAMPUS -
FORGE 1 BUILDING
18920 FORGE DRIVE
CUPERTINO, CA 95014
Sheet Title:
SITE SIGNAGE
Sheet Number:
GN=2
ger
Con
CUPERTINO
Case #
Approva I B
Approva I D
Signature
PREPARED FOR
�- = AT&T
5001 EXECUTIVE PKWY,
SAN RAMON CA 94583
Vendor:
INFRASTRUCTURE
P A R T N E R S
1 150 BALLENA BLVD. UNIT 259
ALAMEDA, CA 94501
AT&T Site ID:
CCL04017
DRAWN BY: MM3
CHECKED BY: JF
L4x4x1 /4", TYP. 1 /4"CLEAR
TYP.
H S S 4x4x1 /4"
HILTI 3/8" 0 KB TZ ,
TYP.
5 01107119 CHANGE ADDRESS
4 12/20/18 LL COMMENT
3 12/07/18 VZW COMMENT
(E) CONCRETE WALL.
6" MIN. THK.
V.I.F.
2 12/06/18 LL COMMENT
1 12/04/18 REVISED 100%ZD
VZW COMMENT
0 1 1 /30/18 100% ZD
REV DATE DESCRIPTION
Licensor:
CSECTION
N.T.S.
8"
NOTE:
PER END CAP, TYP. OF (4) 1. PIPE MOUNTING FRAME MUST BE PLUMB AND
ARCH'L VERTICAL WHEN INSTALLED ON WALL.
V.I.F.
HSS 4x4x1 /4"
2. FIELD VERIFY ALL DIMENSIONS PRIOR TO OFF SITE
w FABRICATION.
U 3. SUBCONTRACTOR TO SUPPLY ALL HARDWARE AS
It is a violation of law for any
persons, unless they are acting
REQUIRED
under the direction of a
L4x4x1 /4", TYP.
4. CONTRACTOR TO CUT AND RE -WORK THE
licensed professional engineer,
OL T.O. (E) BUILDING — — — —
— — — FLASHING IN THE MOUNTING AREA TO PROVIDE
to alter this document
A PLUMB SURFACE FOR BOLTING.
r 5. INSTALL CAULKING ON EACH PROPOSED BOLT
Issued For:
0 2
PENETRATION
j
CCL04017
TELCO EQUIPMENT PER
ARCHITECTURAL
APPLE CAMPUS -
I
I I
FORGE 1 BUILDING
HILTI 3/8" 0 KB TZ ,
TYP.
� � � I
L
18920 FORGE DRIVE
CUPERTINO, CA 95014
OL T.O. (E) ROOF
MANUFACTURER'S
STANDARD MOUNT
Sheet Title:
munity Development Department
Planning Division — Cupertino
PIPE 2 STD.
STRUCTURAL
DETAILS
APPROVED
TUP-2020-002
ApplicationNumber(s)
(E) CONCRETE WALL, NOTE:
6" MIN. THK. SADDLE MOUNT BRACKET ONLY, NOT THE ANTENNAS,
V.I.F. WILL BE PAINTED WITH SHERWIN WILLIAMS COLOR CODE
Sheet Number:
dy: Director/ Staff
to 09/08/20
SW7006 - EXTRA WHITE, TO MATCH THE BUILDING.
Jeffrey Tsumura
NTENNA MOUNT DETAILcase
&N.T.S.
Manager
Con
CUPERTINO
Case #
Approval B
Approva I D
Signature
CODE COMPLIANCE
APPROVALS
THE FOLLOWING PARTIES HEREBY APPROVE AND ACCEPT THESE
PREPARED FOR
ALL WORK AND MATERIALS SHALL BE PERFORMED AND INSTALLED IN
ACCORDANCE WITH THE CURRENT EDITIONS OF THE FOLLOWING CODES
DOCUMENTS & AUTHORIZE THE SUBCONTRACTOR TO PROCEED WITH
AS ADOPTED BY THE LOCAL GOVERNING AUTHORITIES. NOTHING IN
CONSTRUCTION DESCRIBED HEREIN. ALL DOCUMENTS ARE SUBJECT
f
AT&T
THESE PLANS IS TO BE CONSTRUED TO PERMIT WORK NOT CONFORMING
I t `� TO REVIEW BY LOCAL BUILDING DEPARTMENT & MAY IMPOSE
TO THESE CODES.
CHANGES AND MODIFICATIONS.
1) 2016 CALIFORNIA ADMINISTRATIVE CODE, CHAPTER 10, PART 1,
'k
5001 EXECUTIVE PKWY,
TITLE 24 CODE OF REGULATIONS
2) 2016 CALIFORNIA BUILDING CODE (CBC)
f
DISCIPLINE. SIGNATURE DATE
SAN RAMON CA 94583
3) 2016 CALIFORNIA RESIDENTIAL CODE (CRC) WITH APPENDIX H,
PATIO COVERS, BASED ON THE 2015 IRC (PART 2.5)
4) 2016 CALIFORNIA GREEN BUILDINGS STANDARDS CODE
R F ENGINEER:
SITE(CALGREEN) NUMBER: CCL
Vendor:
(PART 11) (AFFECTED ENERGY PROVISIONS ONLY)
AT&T PM.
5) 2016 CALIFORNIA FIRE CODE (CFC), BASED ON THE 2015 IFC,
WITH CALIFORNIA AMENDMENTS (PART 9)
SITE NAME: APPLECAMPUSFORGE I BUILDING
6) 2016 CALIFORNIA MECHANICAL CODE (CMC), BASED ON THE 2015
. CIVIL:
INFRASTRUCTURE
UMC (PART 4)
7) 2016 CALIFORNIA PLUMBING CODE (CPC), BASED ON THE 2015 UPC
A&E.
(PART 5)
2016 CALIFORNIA ELECTRICAL CODE (CEC) WITH CALIFORNIA
SITE TYPE:R FT P8)
SAQ PM.
1 150 BALLENA BLVD. UNIT 259
ALAMEDA, CA 94501
AMENDMENTS,
BASED ON THE 2014 NEC (PART 3)
ADDRESS: 18920 FORGE DRIVE
9) 2016 CALIFORNIA ENERGY CODE (CEC)- PART 6
US I D : 151553 PROPERTY
10) ANSI / EIA-TIA-222-G
1 1) 2016 NFPA 101, LIFE SAFETY CODE
FA# : 10147300CUPERTINO,OWNER:
A 1
AT&T Site ID:
12) 2016 NFPA 72, NATIONAL FIRE ALARM CODE
13) 2016 NFPA 13, FIRE SPRINKLER CODE
FFA 5G N R 39GHz OVERLAY PROJECT
PTN#: 3701 AOGTV6
CCL04017
PACE#: MRSFR049566
PROJECT TEAM
VICINITY MAP
LOCAL MAP
PROJECT DESCRIPTION
APPLICANT LESSEE: PROJECT MANAGER,
LEASING &ZONING:
` -` 'I_ _ .- .� � _, _�•..�_: ti !• :+: *' .: �' I � . i - � } . � .. 1. . �.
___: �._. _ �__� �, ,._ _ r ! I, i _ _
'' "� `' nrI - �_`I?
MODIFICATION TO AN UNMANNED TELECOMMUNICATIONS FACILITY,
CONSISTING OF THE FOLLOWING:
W&C4 ' ' '
AT&T MOBILITY SERVICES, LLC
5001 EXECUTIVE PKWY, J5 INFRASTRUCTURE PARTNERSpartment
y
`" _ _`
'l3t
Thy H''r' - _ �'" ' ' �' - "� :; I -
mes _ � �: �` -' -• "` _' - �'
4 -- Y J� i J
• INSTALL 2 PROPOSED AIR 5331 ANTENNAS MOUNTED ON 2
DRAWN BY: MM3
SAN RAMON, CA 94583 1 150 BALLENA BLVD. SUITE 259
`" ' ''
I y'` - L ;'I '
I ' �`
! '"
PROPOSED SADDLE MOUNT BRACKETS
CHECKED BY: JF
CONTACT: JENNIFER MATHEWS ALAMEDA, CA 94501
Site Acquisition Manager CONTACT: CHARLES OTIS
_ "' -
��,�*,�#,a� ice• 9 F• -
I '
"1= ;. _ #_p�q� -,--• Fes;
• INSTALL PROPOSED CABLES WITHIN PROPOSED CONDUITS
• INSTALL (2) PROPOSED T-MOBILE ANTENNAS MOUNTED ON (2)
.�!._ I
EMAIL: jm5344att.com EMAIL: cotis@j5ip.com--,�
'� -- i '
PROPOSED SADDLE MOUNT BRACKETS, BY OTHERS
PH: (925) 277-6374 PH: (805) 680-5453�
CELL: 310 740-0691
( )
'� - = -- ,r� :. - �-
eA d it
dF
o a �'`" i.
• INSTALL (2) PROPOSED VERIZON ANTENNAS MOUNTED ON (2)
PROPOSED SADDLE MOUNT BRACKETS, BY OTHERS
CONSTRUCTION MANAGER: A&E MANAGER:
_ m P-
AT&T MOBILITY SERVICES, LLC J5 INFRASTRUCTURE PARTNERS
5001 EXECUTIVE PKWY, 2030 MAIN STREET, SUITE 200
SAN RAMON, CA 94583 IRVINE, CA 92614
pe0113�VE, ~ i- T•: i :r`; _ -
- -' Hoixxj�_k Dr
° i v _: _ ., �. __ •, ,- :._�� '_ ;.�
CONTACT: PHUNG NGUYEN CONTACT: JOE FITZSIMONS'
m �` :� �� . •�i -r � 'iF - •'�-� -, _ .
Sr. Specialist -Tech EMAIL: jfitzsimons@j5ip.com
Vendor Management PH: (603) 275-9581
Technology Operations
_ �.., cam_
�
�
„ I T t4�' P '
�' _ j
'� _ ;• "• 4 F}j „� '
L.. * •-.� , -•. l !3 •.
T�F _
I
•.- E*'r
5
01 /07/ 19
CHANGE ADDRESS
4
12/20/18
ILL COMMENT
EMAIL: phung.nguyen@att.com
Vail '''�, i -'.. f-. f �. _ .
E _ ' : • -
'Y ',' '
3
12/07/18
VZW COMMENT
PH: 925 277-6480
( )
CELL: (408) 391-0786
1. _-- _i =' `' i =
4 � •,- �' � Y' t. � '' ' ' -- -�
- - -
2
12/06/18
12/04/1$
ILL COMMENT
REVISED 100%ZD
VZW COMMENT
1
0 1 1 /30/ 18 100% Z D
RF ENGINEER:
-"
M MainStroot Cupurti00 �� - � - - :Y_�� q , . •�� �.
- `•
_ _ 4 ��II _ _
�11lresGreei€H19rd [e ena Creek Blvd
REV DATE DESCRIPTION
AT&T MOBILITY SERVICES, LLC
5001 EXECUTIVE PKWY,.
SAN RAMON, CA 94583
CONTACT: TARUN SETHI
_ }F 9LH�'r
p.. ` �.
Dr yi• .-._ II :. k p ��,
F •k n 4r a I. _
C A L V E R T
Licensor:
RF Design
sty,
'1
EMAIL: ts458v@att.com
L .. ,
� Dupertinn, High Sehml ' �_ - _._ . _ f: �_ , _ -
-' -
PH: (317) 201-9601
ti I _J%
o - •_ --4-_ -' ,. '' �
NORTH '
� _ r. �.� ' '-'� �' -
i �� -
SITE INFORMATION
GENERAL CONTRACTOR NOTES
DRIVING DIRECTIONS
SHEET INDEX REV.
PROPERTY OWNER:
DO NOT SCALE DRAWINGS
FROM: 5001 EXECUTIVE PARKWAY, SAN RAMON, CA 94583
T-1 TITLE SHEET 5
It is a violation of law for any
APPLE, INC.
TO: 18920 FORGE DRIVE,CUPERTINO, CA 95014
persons, unless they are acting
INFINITE
1 INFLOOP
THESE PLANS ARE FORMATTED TO BE FULL SIZE AT 24'' X 36". CONTRACTORS SHALL VERIFY ALL
GN-1 GENERAL NOTES 5
under the direction of a
CUPERTINO, CA 95014
PLANS AND EXISTING DIMENSIONS AND CONDITIONS ON THE JOB SITE AND SHALL
1. HEAD NORTHEAST ON BISHOP DR TOWARD SUNSET DR
GN-2 SITE SIGNAGE 5
licensed professional engineer,
IMMEDIATELY NOTIFY THE ARCHITECT/ENGINEER IN WRITING OF ANY DISCREPANCIES BEFORE
2. TURN LEFT ONTO SUNSET DR
to alter this document
PROCEEDING WITH THE WORK OR MATERIAL ORDERS OR BE RESPONSIBLE FOR THE SAME.
3. USE THE RIGHT TWO LANES TO TURN RIGHT ONTO BOLLINGER CANYON RD
A-1 OVERALL SITE PLAN 5
Issued For:
JURISDICTION: CITY OF CUPERTINO
4. USE THE RIGHT LANES TO MERGE ONTO 1-680 S VIA THE RAMP TO SAN JOSE
A-2 ENLARGED SITE PLAN 5
A.P.N.: 316-09-030
CURRENT ZONING: P (MP) - PLANNED INDUSTRIAL ZONE
EXISTING USE: OFFICE BUILDING & COMMUNICATIONS FACILITY
5. MERGE ONTO 1-680 S
6. CONTINUE ONTO 1-280 N
7. TAKE THE EXIT TOWARD LAWRENCE EXPWY
A-3 PROPOSED ANTENNA PLAN 5
A-4 SOUTH ELEVATIONS 5
CCL04017
GENERAL NOTES
PROPOSED USE: NO CHANGE
8. USE THE LEFT TWO LANES TO TURN LEFT ONTO STEVENS CREEK BLVD
LATITUDE (NAD 83): N 370 20' 04"
9. TURN RIGHT ONTO N TANTAU AVE
A-5 WEST ELEVATIONS 5
APPLE CAMPUS -
LONGITUDE (NAD 83): W 122' 00' 12''
THE FACILITY IS UNMANNED AND NOT FOR HUMAN HABITATION. A TECHNICIAN WILL VISIT THE SITE
10. TURN LEFT AT TANDUM DRIVEWAY
A-6 PROPOSED SOUTHWEST PERSPECTIVE 5
FORGE 1 BUILDING
AS REQUIRED FOR ROUTINE MAINTENANCE. THE PROJECT WILL NOT RESULT IN ANY SIGNIFICANT
ACCESSIBILITY REQUIREMENTS: FACILITY IS UNMANNED AND NOT FOR
DISTURBANCE OR EFFECT ON DRAINAGE; NO SANITARY SEWER SERVICE, POTABLE WATER, OR
D-1 DETAILS 5
18920 FORGE DRIVE
HUMAN HABITATION. ACCESSIBILITY IS NOT REQUIRED PER CBC2016,
TRASH DISPOSAL IS REQUIRED AND NO COMMERCIAL SIGNAGE IS PROPOSED.
S-1 STRUCTURAL DETAILS 5
CUPERTINO, CA 95014
SECTION 1 1 B-203.4 (LIMITED ACCESS SPACE)
STATEMENTS
rSheet Title:
STRUCTURAL ANALYSIS IS NOT WITHIN THE SCOPE OF WORK CONTAINED IN THIS DRAWINGS SET.
mpdEIvA�P1�nYt: Department PG&E
PImdgEyivision - Cupertino
T
TITLE SHEET
(800) 743-5000
1
APPROVED
FOR ANALYSIS OF EXISTING AND/OR PROPOSED COMPONENTS, REFER TO STRUCTURAL ANALYSIS
AT&T RFDS VERSION: 4.00
��Application ' '
PROVIDED UNDER SEPARATE COVER.
Sheet Number:
Num6er(s)
DATE UPDATED: 12/19/18
Director / Staff
ANTENNA MOUNT ANALYSIS IS NOT WITHIN THE SCOPE OF WORK CONTAINED IN THIS DRAWING
ANTENNA
'
to 09
to
FOR ANALYSIS OF MOUNT TO SUPPORT EXISTING AND/OR PROPOSED COMPONENTS, REFER
T=1
TO ANTENNA MOUNT STRUCTURAL ANALYSIS PROVIDED UNDER SEPARATE COVER.
800-227-2600
Jeffrey Tsumusumura
Case Manager
Call 2 Full Working Days In Advance