B-2017-1179CITY OF CUPERTINO BUILDING PERMIT
BUILDING ADDRESS: ]CONTRACTOR: PERMIT NO: B-2017-1179
10268 PARKWOOD DR APT 6 CUPERTINO, CA (326 27 037) THERMAL
OWNER'S NAME: AVERY GLENBROOK LP
OWNER'S PHONE: 650-961-8330
LICENSED CONTRACTOR'S DECLARATION
License Class C-4, C -1 0;C -36-C-38 Lic. #256057
Contractor THERMAL MECHANICAL Date 01/31/2018
I hereby affirm that I am licensed under, the provisions of Chapter 9 (commencing
with Section 7000) of Division 3 of the Business & Professions Code and that my
license is in full force and effect.
I hereby affirm under penalty of perjury one of the following two declarations:
m. I have and will maintain a certificate of consent to self -insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
performance of the work for which this permit is issued.
I have and will maintain Worker's Compensation Insurance, as provided for by
C Section 3700 of the Labor Code, for the performance of the work for which this
permit is issued.
APPLICANT CERTIFICATION
I certify that I have read this application and state that the above
information is correct. I agree to comply with all city and county ordinances
and state laws relating to building construction, and hereby authorize
representatives of this city to enter upon the above mentioned property for
inspection purposes. (We) agree to save indemnify qnd keep harmless the
City of Cupertino against liabilities, judgments, costs, and expenses which
may accrue against said City in consequence of the granting of this permit.
Additionally, the applicant understands and will comply with all non -point
source regulations per the Cupertino Municipal Code, Section 9.18.
1 1 is
I hereby affirm that I am exempt from the Contractor's License Law for one of the
following two reasons:
m. I, as owner of the properly, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for
sale (Seo.7044, Business & Professions Code)
2. I, as owner of the property, am exclusively contracting with licensed
contractors to construct the project (Sec.7044, Business & Professions Code).
I hereby affirm under penalty of perjury one of the following three declarations:
1. I have and will maintain a Certificate of Consent to self -insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
performance of the work for which this permit is issued.
I have and will maintain Worker's Compensation Insurance, as provided for by
Section 3700 of the Labor Code, for the performance of the work for which this
permit is issued.
I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject'to the
Worker's Compensation laws of California. If, after making this certificate of
exemption, I become subject to the Worker's Compensation provisions of the
Labor Code, I must forthwith comply with such provisions or this permit shall
be deemed revoked.
APPLICANT CERTIFICATION
I certify that I have read this application and state that the above information is
correct. I agree to comply with all city and county ordinances and state laws
relating to building construction, and hereby authorize representatives of this city
to enter upon the above mentioned property for inspection purposes. (We) agree
to save indemnify and keep harmless the City of Cupertino against liabilities,
judgments, costs, and expenses which may accrue against said City in
consequence of the granting of this permit. Additionally, the applicant understands
and will comply with all non -point source regulations per the Cupertino Municipal
Code, Section 9.18.
Signature Date 7/26/2017
SANTA CLARA, CA
95054
DATE ISSUED• 07/26/2017
PHONE NO: (408) 988-8744
BUILDING PERMIT INFO•
X BLDG X ELECT X PLUMB
X MECH X RESIDENTIAL _ COMMERCIAL
JOB DESCRIPTION
BLDG #4/UNIT#6; ADD (N) A/C; REPLACE FURNACE, SAME
LOCATION, (I) WASHER AND DRYER HOOK UPS; (I) ELECTRICAL
SERVICE (70 AMP); (I) GAS LINE FOR STOVE, (I) RECEPTACLE
OUTLETS, (N) LIGHT; (N) BATHROOM EXHAUST FANS.
Sq. Ft Floor Area: I Valuation: $20000.00
"N Number- Occupancy Type:
326 27 037
PERMIT EXPIRES IF WORK IS NOT STARTED
WITHIN 180 DAYS OF PERMIT ISSUANCE OR
180 DAYS FROM LAST CALLED INSPECTION.
Issued by Abby yende
Date: 07/26/2017
RE -ROOFS:
All roofs shall be inspected prior to any roofing material being installed. If a roof is
installed without first obtaining an inspection, I agree to remove all new materials for
inspection.
Signature of Applicant:
Date: 7/26/2017
ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER
HAZARDOUS MATERIALS DISCLOSURE
I have read the hazardous materials requirements under Chapter 6.95 of the
California Health & Safety Code, Sections 25505, 25533, and 25534. I will
maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the
Health & Safety Code, Section 25532(a) should I store or handle hazardous
material. Additionally, should I use equipment or devices which emit hazardous
air contaminants as defined by the Bay Area Air Quality Management District I
will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and
�7 the Health & Safety Code n. 55p) 25533, a d 25534.
Owner or authorized agent:
Date: 7126/2017 CON
TRV/CeTIONLENDIINGAGENCY
I hereby affirm that there is a construction lending agency for the performance
of work's for which this permit is issued (Sec. 3097 Civ C )
Lender's Name
Lender's Address
ARCHITECT'S DECLARATION
I understand my plans shall be used as public records.
Licensed
Professional
CONSTRUCTION PERMIT APPLICATION
COMMUNITY DEVELOPMENT DEPARTMENT BUILDING DIVISION
10300 TORRE fi�yENUE QUPERTINO, CA 95014-3255
(408) 777-3228 6,1`6408 1 77-3333 • building
Acupertino.org
.p�
LJ NEW CONSTRUCTION ❑ ADDITION ,
® AZ '1 3ATION / TI ❑ REVISION / DEFERRED ORIGINAL PERMIT #
PROJECT ADDRESSAPN #
10268 Packwood DR, BLDG 41 l
OWNERNAME - ,.as.., PHONE E-MAIL
Avery Glenbrook LLC 650-961-8330 avery@pacbell.net
STREET ADDRESS CITY, STATE, ZIP - FAX
130 East Dana Street Mt. View, CA 94041 650-961-0571
CONTACT NAME Rob Moyer PHONE 408-593-8115 E� rmoyer@thermalmech.com
STREET ADDRESS425 Aldo ave. - CITY, STATE, ZIP FAX 408-988-0233 -
Santa Clara, CA 95054
❑ OWNER ❑ OWNER -BUILDER ❑i OWNER AGENT IR CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER. ❑ TENANT
CONTRACTORNAME Thermal MSC LICENSE NUMBER 256057 LICENSE TYPE BUS.LIC# 299
Mechanical C-4,10,20,36,38
COMPANY NAME Thermal Mechanical E-MAIL rmoyer@thermalmech.com FAX 408-988-0233
STREET ADDRESS 425 Aldo ave. CITY, STATE, ZIP Santa Clara, CA 95054 PHONE 408-988-8744
ARCHITECT/ENGINEER NAME LICENSE NUMBER BUS. LIC #
COMPANY NAME _ - E-MAIL FAX
STREET ADDRESS CITY, STATE, ZIP PHONE
DESCRIPTION OFWORK add new AC, replace furnace in same location, (N) washer/dryer hook ups, (N) electrical panel (70 AMP),
(N) gas line for stove, (N) electrical outlets, (N) light, (N) bathroom exhaust fan
EXISTING USE PROPOSED USE CONSTR. TYPE # STORIES
USE. TYPE I OCC.. I SQ.FT. I VALUATION ($)
EXISTG NEW FLOOR DEMO TOTAL
AREA AREA AREA NETAREA
BATHROOM KITCHEN OTHER
REMODEL AREA REMODEL AREA REMODEL AREA
PORCH AREA DECK AREA. TOTAL DECK/PORCH AREA GARAGE AREA: DETACH
❑ ATTACH
#DWELLINGUNITS: IS A SECOND UNIT ❑YES SECONDSTORY [YES
BEUNGADDED? ❑NO ADDITION? ❑NO
PRE APPLICATION ❑ YES IF YES, PROVIDE COPY OF IS THE BLDGAN ❑ YES UECVEDBS"� TOT VALUATION:
PLANNINGAPPL# []NO PLANNING APPROVAL LETTER EICHLER HOME? []NO
By my signature below, I certify to each of the following: I am the property owner or authorize agent to a ; t on the 4operty owner's behalf. I have read this
application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local
ordinances and state laws relating to building constru on. I authorizerepresentativesof Cupertino to enter the above -identified property for inspection purposes.
Signature of Applicant/Agent: L �� r��^ Dater
_ New SFD or Multifamily dwellings: Apply for demolition permit for
existing building(s). Demolition permit is required prior to issuance of building
permit for new building.
_ Commercial Bldgs: Provide a completed Hazardous Materials Disclosure
form if any Hazardous Materials are being used as part of this project.
Copy of Planning Approval Letter or Meeting with Planning prior to
submittal of Building Permit application.'
BldgApp_201 1. doc revised 06121111
x. : SMOKE / CARBON MONOXIDE .ALARMS •
• . OWNER CERTIFICATE OF COMPLIANCE
COMMUNITY DEVELOPMENT DEPARTMENT• BUILDING DIVISION
CUPERTINO 10300 TORRE AVENUE• CUPERTINO,CA 95014-3255
(408)777-3228• FAX(408)777-3333• buildinq(a cupertino.orq
' s ,U
a! ^.F",.'n :"b '� s r #s,S ''dYk yc' x q,aY.x irt 5 �} .✓t' 4 a5�.t C"S F�4 yk i ''� 4 .r f y j f
.i� �, p �^ 7{z 'r �..s �'y,1{- i z ✓f v x. S"Ps ,F� Y '#i'¢ C L a s � y �..
PEItI4I 11`CAVI OT;SE FI A€�Ii�A IiN�'II��U CERTIFI AT HS S BEEN t u `
•
��u.�k,19..5 E�'l%[Rt�S.n. a-�FTSii ..5� k 11�
' �, C®�'IP TT D Sli \ D 'TIS TiTR ED'i€� �1 B DINND .SION� ,
� " "� y`" ,e,.' ,.r ' 'S.e'k,1 d a 'u'' ayy,�2''`,k-''t - kilo' a .L 'M-VS:i£ ?-: i3s it ..
',�': rx!5..•.�.r....."".'3T,r'°`R,. �s,7'� 'ti ex^.-sTMxnF:�;,resrxr.;ra5cx�rn^fc�c�.,,�3e� ^,x��,.g.�="�'f„^„"^ :.s�^aaz;�aaM'
PURPOSE
`Phis affidavit is a self-certification for the installation of all required Smoke and Carbon Monoxide Alarms for
compliance with 2013 CRC Section R314, 2013 CBC Sections 420.6 and 907.2.11.2 where ho interior access for
inspections are required.
GENERAL INFORMATION .
Existing single-family and multi-family dwellings shall be provided with Smoke Alarms and Carbon
Monoxide alarms..When the valuation of additions, alterations, or repairs to existing dwelling units exceeds
$1000.00, CRC Section R314 and CBC Sections 907.2.11.5 and 420.6 require that Smoke Alarms and/or Carbon
Monoxide Alarms be installed in the following locations:
AREA SMOKE ALARM CO ALARM;__''
Outside of each separate sleeping area in the immediate vicinity of X X",
the bedroom(s)
On every level of a dwelling unit including basements _ X
Within each sleeping room
Carbon Monoxide alarms are not required in dwellings which donot contain fuel-burning appliances and,tlnat
do not have an attached garage. Carbon monoxide alarms combined with smoke alarms shall comply with
CBC Section 420.6 and shall be approved by the Office of the State Fire Marshal. ;
Power Supply: In dwelling units with no commercial.power supply, alarm(s) may be solely battery.operat�d..,
In existing dwelling units, alarms are permitted to be solely battery operated where repairs or alterations do
not result in the removal of wall and ceiling finishes or there is no access by means of attic,.basement or cr1nri' !'
• space.Refer to CRC Section R314 and CBC Sections 907.2.11.4 and 420.6.2. An electrical permit is required'fOr
alarms which must be connected to the building wiring.
As owner of the above-referenced property, I hereby certify that the alarm(s) referenced above has/have been
installed in accordance with the manufacturer's instructions and in compliance with the California Building
and California Residential Codes. The alarms specified below have been tested and are operational, as of the
date signed below.
Address: /Oz e, e r Q
�c.buepg1 Or. L/ Permit No.4.-z617 /) ?
Specify Number of Alarms: # Smoke Alarms: Z #Carbon Monoxide Detectors:
I have read and a ree to comp/ with the nd conditions of this statement
Owner(or Owner Agent's)Name:
34MVf G 4/ gZZO Signature Dat1/ /7
Contractor Name: 5 J
��e �( 560 Signature ' � Lica Date:?/3o/./ 7
{
(,...,1 ...,a r•n r. , a a n iii/,
MATER-CONSERVING PLUMBING FIXTURES
OWNER CERTIFICATE OF COMPLIANCE
COMMUNITY DEVELOPMENT DEPARTMENT• BUILDING DIVISION
CUPERTINO10300 TORRE AVENUE• CUPERTINO, CA 95014-3255
' (408)777-3228•FAX(408)777-3333• buildino a(�cupertino.org
Owner NameU flr;? , L. L C / Permit No. /— tl/7_// 79
Address /02-0 F Pai L /D . 11'4,
1. Is.your real property a registered historical site?
❑ Yes Civil Code Sections 11,01.1 through 1101.8 do not apply. Skip the rest of the form and sign bottom of form.
No Go to Question 2.
2. Does'your real property have a licensed plumber certifying that,due to the age or configuration of the property or its
,plumbing,installation of water-conserving plumbing fixtures is not technically feasible?
Yes Civil Code Sections 1101.1 through 1101.8 do not apply.'
(
The licensed plumber's,certification has been provided to the Building Division.
Skip the rest of the form and sign bottom of form.
❑ No Go to Question 3.
3. Is water service permanently disconnected for your building?
❑ Yes Civil Code Sections 1101.1 through 1101.8 do not apply. Skip the rest of the form and sign bottom of form.
No Go to Question 4.
4. Is your real'property built and available for use or occupancy on or before January.1, 1994?
❑ No MY real property is built and available for use or occupancy after January 1, 1994.
Civil Code Sections 1101.1 through 1101.8 do not apply. Skip the rest of the form and sign bottom of forth.
Yes My real property is built andavailable for use or occupancy on or before January 1, 1994.
Civil Code Sections 1101.1 through 1101.8 apply. Check one of the three following statements and sign
bottom of form..
5. Please check ONE of the following:
❑ My property is a single-family residential real property. See Civil Code Section 1101.4.
On and after January 1, 2014,building alterations or improvements shall require all non-compliant plumbing fixtures.
to be replaced with water-conserving plumbing fixtures throughout the building.On or before January 42017,all non-
compliant;;plumbing fixtures shall be replaced with water-conserving plumbing fixtures (regardless of whether •
property undergoes alterations or improvements).
My property is a multifamily residential real property. See Civil Code Section 1101.5.
On and after January 1, 2014,specified building alterations or improvements shall require non-compliant '
plumbing fixtures to be replaced with water-conserving plumbing fixtures. •
On or before January 1,2019,all non-compliant plumbing fixtures shall be.replaced with water-
conserving plumbing fixtures throughout the building(regardless of whether property undergoes alterations or
improvements).
El My property is a commercial real property. See Civil Code Section 1101.5.
On and after January 1, 2014,specified building alterations or improvements shall require non-compliant
plumbing fixtures to be replaced with water-conserving plumbing fixtures.
On or before January .1, 2019, all non-compliant plumbing fixtures shall be replaced with water- conserving
plumbing fixtures throughout the building(regardless of whether property undergoes alterations or improvements).
I,as the owner,or owner's agent of this property,certify under penalty of perjury that non-compliant plumbing fixtures will be
replaced prior.;to date specified above with water-conserving plumbing fixtures in accordance with Civil Code Sections 1101.1
through 1101','.8,the current California Plumbing Code and California Green Building Standards Code,and manufacturer's.
installation requirements, and that the water-conserving plumbing fixtures comply with the requirements as indicated in the
table on the following .age.
Owner or Owner Agent's Signature: 7,3M6' PC/14.1&.0) Date: 740h 'I .•
Upon completing and signing this Certificate,please return it to the Building Division in order to final your building permit. •
SB407 2015.doc revised 08/26/15 •
•
� a'I7L�liX l3�,,1��3.1W 1. M 3A.B�i13aIL'�Y7Jl7 n.Y.1LL' 1.31`li,s ?, n is � �r i t
FtStEitifF ' WP s4" b,, a1-501-1 * litr gag x , � E
5 e x' t .`�'' < z�j '� j �'. �k s »,'`� ��r- 31�rev>>r �r�a �a`esv1" �,.,- :
� "�° w$n. vwazrts.;!'�r.� .�z. .a.•:
.. ,roxm.,zr�m,,m�res� •.r>"raxc+gwnsmmez ss-raz:x-uew�n.�.vxvsraxxn.u.�.azs�er+ae,:�x.•�-ewn�*m'sms�xc�.•a•
Non-Compliant • Water-Conserving Plumbing Fixture
Plumbing Fixture1 (Fixture Complying with Current Code Applicable to New Construction)
Maximum Water Usage/Flow Rate
Fixture Type 2013 CPC Ch.4 2013 CPQ Ch. 4 2013 CPC Ch.4
Water Usage 2013 CALGreen Div. 4.3 2013 CALGreen Div. 4.3 2013 CALGreen Div. 5.3
(Flow Rate Single-Family Multi-Family Commercial
Residential Residential
Water Closets Exceed'1.6 Single flush toilets: 1.28 gallons/flush
(Toilets) Gallons/flush Dual flush toilets; 1.28 gallons/flush effective flush volume (the composite,
average flush volume of two reduced flushes and one full flush)
Urinals Exceed 1.0
Gallons/flush 0.5 gallons/flush
;
Showerheads Exceed 2.5 2.0 gallons per minute @ 80 psi. Also certified to the performance criteria of
gallons per minute U.S. EPA WaterSene Specification for.Showerheads
(A hand-held showeriis considered a showerhead;)
For multiple showerheads serving one shower,the combined flow rate of all
showerheads and/or bther shower outlets controlled by a single valve shall not
exceed 2.0 gallons per minute @ 80 psi, or the shower shall be designed to
allow only one shower outlet to be in operation at a time.
Faucets a Exceed 2.2 gallons Maximum 1.5 gallons per Within units: 0.5 gallons per minute @ 60
Lavatory per minute minute @ 60 psi; minimum Maximum 1.5 gallons psi
Faucets 0.8 gallons per minute @ per minute @ 60 psi;
20 psi minimum 0.8 gallops
per minute @ 20 psi
In common and public
use areas: 0.5 gallons
per minute @ 60 psi
1.8 gallons per minute
@ 60 psi
Faucets- Exceed 2.2 gallons 1.8 gallons per minute @ 1.8 gallons per minute 1.8.gallons per minute @ 60
Kitchen per minute 60 psi @ 60 psi psi
Faucets May temporarily increase May temporarily
up to 2.2 gallons per increase up to 2.2
minute @ 60 psi, and must gallons per minute @
default to maximum 60 psi, and must
1.8 gallons per minute @ default to maximum
60 psi 1.8 gallons per minute
Where faucets meeting @ 60 psi
the above are unavailable, Where faucets meeting
aerators or other means the above are
may be used to achieve unavailable, aerators or
reduction. other means may be
used to achieve
reduction.
1. If the existing plumbing fixture water usage/fly rate is equal to or lower than the figure shown,it is not required to be upgraded.
1
SB407 2015.doc revised 08/26/15
Arnold Hom
07/26/17
SHEET NO. DESCRIPTION
SYMBOL ABBREV. DESCRIPTION ABBREV. SYMBOL DESCRIPTION
ELECTRICAL CONN. LAYOUT 1
SCALE: NONE
·
·
GAS CONNECTION SCHEMATIC DIAGRAM 2
SCALE: NONE
DESCRIPTION UNIT TYPE
(FLOOR PLAN)
PIPE PENETRATION THRU (E) JOIST3
SCALE: NONE
MARK MAKE MODEL COMMENTSVOLTAGEWT.,
LBS
·
LOCATION
·
·
·
·
·
·
·
·
·
·
MODELMAKE MARK SEER VOLTAGE MCA COMMENTS
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
A P A R T M E N T S
G L E N B R O O K
MANUFACTURER
& MODEL NO.TAG SERVICE CFM @
0.1 WG
AMPERAGE
CAPACITY
VENT
SIZE WATTAGE
VOLTAGE OPER. WTG
LBS COMMENTS
·
·
·
·
·
·
·
·
·
·
·
·
AREA OF
WORK
·
MATERIAL SERVICE
·
·
·
·
·
NEW DRYER DUCT IN (E) JOIST BAY4
SCALE: NONE
Arnold Hom
07/26/17
07/26/17
B-2017-1179
Abby Ayende
MANUFACTURER INFORMATION:
PABCO® Gypsum
a division of PABCO® building products, LLC
PO Box 419074
Rancho Cordova, CA 95741
Technical Services: 866-282-9298
www.PABCOgypsum.com
PABCO® Gypsum Specification PGS-002
ASTM specification C 1396
DESCRIPTION:
The FLAME CURB® family of gypsum panel
products is composed of a fire-resistant gypsum
core, reinforced with glass fibers that provide
increased strength and enhanced fire-resistant
properties. The paper encasing the proprietary
core is manufactured with 100% recycled paper
and is folded around the long edges to reinforce
in addition to protecting the core; the panel
ends are cut square. The long panel edges are
tapered, allowing a recessed joint area to be
reinforced and concealed to create a monolithic
surface suitable for decoration. FLAME CURB®
Type X and 1/2” FLAME CURB® Type XXX meets
and/or exceeds the requirements specified by
ASTM under its wallboard standard ASTM C 1396
Type X.
FLAME CURB® Super ’C’ is appropriate for
applications requiring an extended fire resistance
performance that exceeds the Type X “classified”
core formulation in fire-resistive performance.
This product was developed with the addition of
mineral additives integrated into the product’s
core to enhance the gypsum core’s performance
during the exposure to fire. For fire and sound
rated systems it is important to consult the
appropriate fire resistance directory or test
report for specific components and assembly
that are acceptable for use in the specific system.
Systems using FLAME CURB® Super ‘C’ qualify
for fire ratings up to 4 hours in walls, 3 hours in
ceilings and 4 hours for column protection.
FLAME CURB® Type X and FLAME CURB® Super
C are “classified” by Underwriters Laboratories in
accordance with ASTM E 119 UL 263.
continued on back
Job name:
Contractor: Date:
PRIMARY USES:
FLAME CURB® products are a non-structural
gypsum panels intended for interior walls,
ceilings, and partitions in residential and
commercial applications which often require
specific fire-resistant assemblies. FLAME CURB®
Type C is appropriate for applications requiring
an extended fire resistance performance that
exceeds the Type X “classified” core formulation
in fire-resistive construction. Additional
applications include use as a roof underlayment
per GA-276. This product is designed for direct
mechanical attachment to metal or wood
framing members. With the wallboard joints
properly treated per GA-216 and GA-214, FLAME
CURB® products will resist the passage of smoke.
LIMITATIONS:
• Intended for interior applications, and shall not
be used where there will be direct exposure
to water or continuous high humidity before,
during, and after construction.
• Non-load bearing
• Avoid exposure to temperatures exceeding
125 degree F (52 degree C) for an extended
period of time.
• PABCO® FLAME CURB® is a non-structural
panel, not to be used as a structural fastener
base or to support wall or ceiling mounted
objects.
• All materials used in conjunction with the
application of FLAME CURB® Type X, XXX
or Super ‘C’ gypsum panels in Fire or Sound
Rated systems shall be installed as specified in
the applicable specific test report.
APPLICATION:
PABCO® Gypsum endorses the Gypsum
Association’s publication GA-214, GA-216 (www.
gypsum.org) and ASTM Standard Specification
C840 (www.astm.org) as its application
specification that provide detailed instructions
on the standard application of wallboard panels
and proper joint finishing procedures. For fire
and sound rated systems it is important that you
consult the appropriate fire resistance directory
or test report for the complete assembly
documentation and related information. These
systems must be installed in strict compliance
with the detailed fire test assembly description,
including core types and other components
such as studs, fastener spacing and fasteners
type and installed as tested. To qualify for listed
sound ratings, special caulking, insulation or clips
are generally added to the systems as detailed in
the test report.
FIRE RESISTANT RATINGS:
Fire Resistance Rated Designs are promulgated
from tests performed at IAS* certified
independent testing laboratories, and these
designs include specific materials assembled
in a precise configuration. When choosing
construction details to achieve specific fire-
resistance rated requirements, care must be
taken to insure that each component of the
specified assembly is the proper one specified
in the referenced fire-resistance rated design,
and assembled in accordance with the specific
requirements of the assembly.
*The International Accreditation Service — IAS
— is a non-profit, public benefit corporation and
a leading accreditation body in the United States.
Internationally recognized, accreditation by IAS
makes it easier to market products and services
both inside and outside the United States.
STORAGE & HANDLING:
FLAME CURB®
Type X, Type XXX, Type C, Super C
what the job demands
Arnold Hom
07/26/17
Store all PABCO® gypsum panels flat; do not
store on edge as panels are heavy and may fall
over causing injury or death. Store in an area
that offers protection from adverse weather
conditions, condensation, and other forms of
moisture. Avoid job site conditions that expose
gypsum board to water or moisture. Plastic
shipping bags are temporary, and intended
for protection during transit only, and must be
removed promptly upon arrival. Store gypsum
board under protected cover, off the ground
with sufficient support to prevent sagging.
Exercise proper care to avoid impact and/or
scuffing of the glass faces, undue flexing, and
damage to panel’s edges, corners, and ends.
WARRANTIES & REMEDIES:
Current warranty information for this product is
available online at www.PABCOgypsum.com.
LEGAL NOTICES:
PABCO® Gypsum, the PABCO® logo, what
the job demands™, and FLAME CURB® are
trademarks or registered trademarks of Pacific
Coast Building Products, Inc. and licensed to
PABCO® Gypsum in the United States and other
countries. Products described herein may not
be available in all geographic markets. Consult
your PABCO® Gypsum sales representative
for information. Product features and
Information subject to change without notice.
Visit www.PABCOgypsum.com for product
updates and current information.
PRODUCT DATA, SIZES & TYPES:
Product Thickness Width Length1
Edge Type Weight2 UL Core Type
Type XXX
1/2"
(12.7 mm)
48"
(1219 mm)
8’ - 12'
(2438 mm to
3658 mm)
Tapered 1.9 lbs/ft
2
PG-3
Super C
1/2”
(12.7 mm)
48”
(1219 mm)
12’
(3658 mm)
Tapered 2.0 lbs/ft
2
PG-C
Type X
5/8”
(15.8 mm)
48”
(1219 mm)
8’ - 12’
(2438 mm to
3658 mm)
Tapered,
Round
2.2 lbs/ft
2
PG-11
Type X
5/8”
(15.8 mm)
54”
(1372 mm)
8’ - 12’
(2438 mm to
3658 mm)
Tapered 2.2 lbs/ft2
PG-11
Type C
5/8”
(15.8 mm)
48”
(1219 mm)
12’
(3658 mm)
Tapered 2.4 lbs/ft2
TYPE C
PACKAGING: 2 pieces per bundle, face-to-face, and end labeled.
1Length availability may change; other lengths may be available on a special order basis. Consult with your local
PABCO® representative
2Represents approximate weight for design and shipping purposes. A more exact weight may be available for your area; consult
with your local PABCO® representative.
APPLICABLE STANDARDS & TECHNICAL DATA:
FLAME CURB® Thickness 1/2” 5/8”
Manufacturing: ASTM C 1396
Installation:
Gypsum Association GA-214, GA-216 – www.gypsum.org
ASTM C 840 – www.astm.org
Surface Burning Characteristics (ASTM E 84): Flame Spread 15; Smoke Developed 0
Combustibility (ASTM E 136): Non-Combustible
Fire-Resistant Assemblies:
Gypsum Association GA-600, Fire Design Manual Underwriters
Laboratories, UL Fire Resistance Directory
Permeance (perms; ng/Pa.s.m2) (ASTM E 96): > 1 > 1
Flexural Strength, Load lbf (N) (ASTM C 473): Test Method B
Perpendicular to substrate edge 110 lbf (489 N) 107 lbf (476 N)
Parallel to substrate edge 40 lbf (178 N) 46 lbf (205 N)
Humidified deflection (ASTM C 473): 10/8” (32 mm) 5/8” (16 mm)
Thermal resistance R value (ASTM C 518): 0.45 0.48
Composition: 100% recycled paper face, gypsum core
Material Safety Data Sheet MSDS: MSDS available at www.PABCOgypsum.com, Technical Data
Foil Application:
Foil may be applied to the back of ASTM C 1396 gypsum
wallboard for the purpose of complying with ASTM C 1396
paragraph 5.1.
PABCO® Gypsum literature: “Construction Guide: Fire & Sound Rated Systems”
Recycled Content: Refer to PABCO® Sustainable Materials Data Sheet for plant
specific details.
Federal Specification SS-L-30D Type III, Grade X. For Type C products should the Grade for the Federal Spec be ‘’R’. The federal
specification for gypsum board, SS-L-30d was withdrawn in 1984. It is provided here for informational purposes only.
NEED HELP WITH A PROJECT OR HAVE
QUESTIONS ABOUT THIS PRODUCT?
Contact the PABCO® Gypsum Technical
Services Team at (866) 282-9298.
ACHIEVE HIGH STC DESIGNS LIKE
NEVER BEFORE WITH QUIETROCK!
Visit www.QuietRock.com or call
(800) 797-8159 to speak with a product
specialist.
FLAME CURB®
Type X, Type XXX, Type C, Super C
what the job demands
Arnold Hom
07/26/17
·
·
·
MECHANICAL FLOOR PLAN - DEMOLITION (UNIT TYPE "C") 1
SCALE: 1/4"=1'-0"
MECHANICAL FLOOR PLAN - NEW (UNIT TYPE "C")
2
SCALE: 1/4"=1'-0"
Arnold Hom
07/26/17
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
ELECTRICAL FLOOR PLAN - DEMOLITION (UNIT TYPE "C") 1
SCALE: 1/4"=1'-0"
ELECTRICAL FLOOR PLAN - NEW (UNIT TYPE "C")
2
SCALE: 1/4"=1'-0"
Arnold Hom
07/26/17