Press Alt + R to read the document text or Alt + P to download or print.
This document contains no pages.
B-2017-1141CITY OF CUPERTINO BUILDING PERMIT
BUILDING ADDRESS: CONTRACTOR: PERMIT NO: B-2017-1141
21717 RAINBOW DR CUPERTINO, CA 95014-4828 (366 37 006) SUNLOGIC INC
SANTA CRUZ, CA
95062
OWNER'S NAME: WOOLPERT ROSE ANN TRUSTEE I I DATE ISSUED: 07/17/2017
OWNER'S PHONE: 408-996-8007 1 ( PHONE NO: (925) 939-8300
License Class C10. C46 Lic. #932914
Contractor SUNLOGIC INC Date 05/31/2019
I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing
with Section 7000) of Division 3 of the Business & Professions Code and that my
license is in full force and effect.
I hereby affirm under penalty of perjury one of the following two declarations:
1. I have and will maintain a certificate of consent to self -insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
performance of the work for which this permit is issued.
I have and will maintain Worker's Compensation Insurance, as provided for by
Section 3700 of the Labor Code, for the performance of the work for which this
permit is issued.
APPLICANT CERTIFICATION
I certify that I have read this application and state that the above
information is correct. I agree to comply with all city and county ordinances
and state laws relating to building construction, and hereby authorize
representatives of this city to enter upon the above mentioned property for
inspection purposes. (We) agree to save indemnify and keep harmless the
City of Cupertino against liabilities, judgments, costs, and expenses which
may accrue against said Ci in conquence of the granting of this permit.
Additionally, the applicant derstaTd;s and will comply with all non -point
source regulationspe"he upertinMunicipal Code, Section 9.18.
Sig
I hereby affirm that I am exempt from
following two reasons:
Date 7/17/2017
Contractor's License Law for one of the
I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for
sale (Sec.7044, Business & Professions Code)
I, as owner of the property, am exclusively contracting with licensed
contractors to construct the project(Sec.7044, Business & Professions Code).
I hereby affirm under penalty of perjury one of the following three declarations:
t. I have and will maintain a Certificate of Consent to self -insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
performance of the work for which this permit is issued.
2. I have and will maintain Worker's Compensation Insurance, as provided for by
Section 3700 of the Labor Code, for the performance of the work for which this
permit is issued.
3. I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the
Worker's Compensation laws of California. If, after making this certificate of
exemption, I become subject to the Worker's Compensation provisions of the
Labor Code, I must forthwith comply with such provisions or this permit shall
be deemed revoked.
APPLICANT CERTIFICATION
I certify that I have read this application and state that the above information is
correct. I agree to comply with all city and county ordinances and state laws
relating to building construction, and hereby authorize representatives of this city
to enter upon the above mentioned property for inspection purposes. (We) agree
to save indemnify and keep harmless the City of Cupertino against liabilities,
judgments, costs, and expenses which may accrue against said City in
consequence of the granting of this permit. Additionally, the applicant understands
and will comply with all non -point source regulations per the Cupertino Municipal
Code, Section 9.18.
Signature Date 7/17/2017
BUILDING PERMIT INFO:
X BLDG X ELECT _ PLUMB
_ MECH X RESIDENTIAL _ COMMERCIAL
JOB DESCRIPTION:
(N) 18 -PANEL ROOF MOUNTED PV SYSTEM (6.48 KW); NEW
SUBPANEL (125 AMP) - GARAGE
Sq. Ft Floor Area: I Valuation: $31428.00
APN Number: Occupancy Type:
36637 006
PERMIT EXPIRES IF WORK IS NOT STARTED
WITHIN 180 DAYS OF PERMIT ISSUANCE OR
180 DAYS FROM LAST CALLED INSPECTION.
Issued by: Jasmine Archbold
Date: 07/17/2017
RF -ROOFS:
All roofs shall be inspected prior to any roofing material being installed. If a roof is
installed without first obtaining an inspection, I agree to remove all new materials for
inspection.
Signature of Applicant:
Date: 7/17/2017
ROOF COVERINGS TO BE CLASS "A" OR BETTER
HAZARDOUS MATERIALS DISCLOSURE
I have read the hazardous materials requirements under Chapter 6.95 of the
California Health & Safety Code, Sections 25505, 25533, and 25534. I will
maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the
Health & Safety Code, Section 25532(a) should I store or handle hazardous
material. Additionally, should I use equipment or devices which emit hazardous
air contaminants as defined by the Bay Area Air Quality Management District I
will maintain compliance with the Cuper ' o Munici al Code, Chapter 9.12 and
the Health & Safety Code, Sec ' ns 5505 5533, and 25534.
Owner or authorized agent: r_h� —
Date: 7/17/2017
CONSTRUCTION LENDING AGENC(/
I hereby affirm that there is a construction lending agency for the performance
of work's for which this permit is issued (Sec. 3097, Civ C.)
Lender's Name
Lender's Address
ARCHITECT'S DECLARATION
I understand my plans shall be used as public records.
Licensed
Professional
CUPERTINO
ALTERNATIVE ENERGY PERMIT APPLICATION
COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION
10300 TORRE AVENUE • CUPERTINO, CA 95014-3255
(408) 777-3228 • FAX (408) 777-3333 • building(&cupertino.org
AE
. Vu_1
PROJECT ADDRESS
21717 Rainbow Dr
APN #
I 366-37-006
OWNERNAME Rose Ann Woolpert
PHONE 408-996-8007
E-MAIL
STREET ADDRESS 21717 Rainbow Dr
CITY, STATE, ZIP Cupertino, CA 95014
FAX
CONTACT NAME Marina Zierk
PHONE 408-489-0793
E-MAIL mzierk@solartechnologies.com
STREET ADDRESS 705 N. Branciforte Ave
CITY, STATE, ZIP Santa Cruz, CA 95062
TFAX7
❑ OWNER ❑ OWNER -BUILDER ❑ OWNER AGENT
U CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT
CONTRACTOR NAME
Sunlogic dba Solar Technologies
LICENSE NUMBER
932914
LICENSE TYPE
C10 C46
BUS. L[
COMPANY NAME Sunlogic dba Solar Technologies.com
E-MAIL mzierk@solartechnologies.com
FAX
STREET ADDRESS
705 N. Branciforte Ave
CITY, STATE, ZIP
Santa Cruz, CA 95062
PHONE
408-489-0793
ARCHITECT/ENGINEER NAME
Solar Technologies
LICENSE NUMBER
BUS. LIC #
COMPANY NAME
E-MAIL
FAX
STREET ADDRESS
CITY, STATE, ZIP
PHONE
USE OF SFD or Duplex ❑ Multi -Family
STRUCTURE: ❑ Commercial
PROJECT IN WILDLAND
URBAN INTERFACE AREA ❑ Yes `X NO
PROJECT IN
FLOOD ZONE ❑ Yes Q NO
6 SOLAR PANELS
I ❑ ELECTRIC VEHICLE CHARGING STATION I
❑ SOLAR WATER HEATING
❑ OTHER:
FOR SOLAR PANELS.- NUMBER OF PANELS/UNITS: 18
KILOWATTS (COMMERCIAL ONLY):
TOTAL VALUATION: 31,428
DESCRIPTION OF WORK
6.48kW rooftop flush mount PV system with 18 panels with integral microinverters, new 125A subpanel in garage
RECEIVED BY -
By my signature below, I certify to each of the following: I am the property owner or authorized agent to act on the property owner's behalf. I have read this
application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local
ordinances and state laws relating to building construe auth esentatives of Cupertino to enter the above -identified property for inspection purposes.
Signature of Applicant/Agent: Date: 7/14/17
SrJjPLEME7rfjRFORMATION REQUIRED
OFFICE USE ONLY
❑ OVER-THE-COUNTER
pw
F❑
k
EXPRESS
U
w
S
U
Z
a
❑ STANDARD
❑ LARGE
❑ MAJOR
PVApp2011.doc revised 03/16/11
SMOKE / CARBON MONOXIDE ALARMS
OWNER CERTIFICATE OF COMPLIANCE
COMMUNITY DEVELOPMENT DEPARTMENT•BUILDING DIVISION
CUPERTINO 10300 TORRE AVENUE•CUPERTINO,CA 95014-3255
(408)777-3228•FAX(408)777-3333•buildincq a(�,cupertino.orq
PERMIT CANNOT BE FINALE.UNTIL THIS CERTIFICATE HAS BEEN
COMPLETED,SIGNED,AND RETURNED TO THE BUILDING DIVISION
PURPOSE
This affidavit is a self-certification for the installation of all required Smoke and Carbon Monoxide Alarms
for compliance with.2016 CRC Section R314,2016 CBC Sections 420.6 and 907.2.11.2 where no interior access
for inspections are required.
GENERAL INFORMATION
Existing single-family and multi-family dwellings shall be provided with Smoke Alarms and Carbon
Monoxide alarms. When the valuation of additions, alterations,or repairs to existing dwelling units exceeds
$1000 00, CRC Section R314 and CBC Sections 907.2.11.5 and 420.6 require that Smoke Alarms and/or Carbon
Monoxide Alarms be installed in the following locations:
AREA SMOKE ALARM CO ALARM
Outside of each separate sleeping area in the immediate vicinity of X X
the bedroom(s)
On every level of a dwelling unit including basements X X
Within each sleeping room X
Carbon Monoxide alarms are not required in dwellings which do not contain fuel-burning appliances and that
do not have an attached garage. Carbon monoxide alarms combined with smoke alarms shall comply with
CBC Section 420.6 and shall be approved by the Office of the State Fire Marshal.
Power Supply In dwelling units with no commercial power supply, alarm(s)may be solely battery operated.
In existing dwelling units, alarms are permitted to be solely battery operated where repairs or alterations do
not result in the removal of wall and ceiling finishes or there is no access by means of attic,basement or crawl
space.Refer to CRC Section R314 and CBC Sections 907.2.114 and 420 6.2.An electrical permit is required for
alarms which must be connected to the building wiring.
As owner of the above-referenced property,I hereby certify that the alarm(s)referenced above has/have been
installed in accordance with the manufacturer's instructions and in compliance with the California Building
and California Residential Codes.The alarms specified below have been tested and are operational, as of the
date signed below
Address: t2-1)/ Permit No.8 -do/7 -OW
Specify Number of Alarms: #Smoke Alarms: I fP ( #Carbon Monoxide Detectors. 14
I have read and agree to comply with the terms and conditions of this statement
Owner(orO''wner Agent's)Name:
Vaie Af/U Signature Date:V/S/l7
Contractor Name:
Signature Lic.# Date:
Smoke and COfosm.doc revised 12/15/16
` \�I iy WATER-CONSERVING PLUMBING FIXTURES
if/ OWNER CERTIFICATE OF COMPLIANCE
-r.,r�'"' COMMUNITY DEVELOPMENT DEPARTMENT•BUILDING DIVISION
10300 TORRE AVENUE•CUPERTINO,CA 95014-3255
CUPERTINO
(408)777-3228•FAX(408)777-3333•buildinq(&.cupertino.orq
Owner Name Se47214 eej Permit No. a-oa)l? /Pi/
Address ( 7 / '7 / 2.61J Q92� o
1. Is your real property a registered historical site?
❑ Yes Civil Code Sections 1101.1 through 1101.8 do not apply. Skip the rest of the form and sign bottom of form.
o Go to Question 2.
2. Does your real property have a licensed plumber certifying that,due to the age or configuration of the property or its
plumbing,installation of water-conserving plumbing fixtures is not technically feasible?
❑ Yes Civil Code Sections 1101.1 through 1101.8 do not apply.
The licensed plumber's certification has been provided to the Building.Division.
Skip the rest of the form and sign bottom of form.
zE No Go to Question 3.
3. Is water service permanently disconnected for your building?
❑ Yes Civil Code Sections 1101.1 through 1101.8 do not apply. Skip the rest of the form and sign bottom of form.
o Go to Question 4.
4. Is your real property built and available for use or occupancy on or before January 1,1994?
CI No My real property is built and available for use or occupancy after January 1, 1994.
Civil Code Sections 1101.1 through 1101.8 do not apply. Skip the rest of the form and sign bottom of form.
Yes My real property is built and available for use or occupancy on or before January 1, 1994.
Civil Code Sections 1101.1 through 1101.8 apply. Check one of the three following statements and sign
bottom of form..
5. Ple check ONE of the following:
eas
My property is a single-family residential real property. See Civil Code Section 1101.4.
ltlZZZ////// On and after January 1,2014,building alterations or improvements shall require all non-compliant plumbing fixtures
to be replaced with water-conserving plumbing fixtures throughout the building.On or before January 1,2017,all non-
compliant plumbing fixtures shall be replaced with water-conserving plumbing fixtures (regardless of whether
property undergoes alterations or improvements).
❑ My property is a multifamily residential real property. See Civil Code Section 1101.5.
On and after January 1,2014,specified building alterations or improvements shall require non-compliant
plumbing fixtures to be replaced with water-conserving plumbing fixtures.
On or before January 1,2019,all non-compliant plumbing fixtures shall be replaced with water-
conserving plumbing fixtures throughout the building(regardless of whether property undergoes alterations or
improvements).
My property is a commercial real property. See Civil Code Section 1101.5.
On and after January 1,2014,specified building alterations or improvements shall require non-compliant
plumbing fixtures to be replaced with water-conserving plumbing fixtures.
On or before January 1, 2019, all non-compliant plumbing fixtures shall be replaced with water- conserving
plumbing fixtures throughout the building(regardless of whether property undergoes alterations or improvements).
I,as the owner or owner's agent of this property,certify under penalty of perjury that non-compliant plumbing fixtures will be
replaced prior to date specified above with water-conserving plumbing fixtures in accordance with Civil Code Sections 1101.1
through 1101.8,the current California Plumbing Code and California Green Building Standards Code,and manufacturer's
installation requirements,and that the water-conserving plumbing fixtures comply with the requirements as indicated in the
table on the following page.
Owner or Owner Agent's Signature: de A Date: 7 /5 ( 7
Upon completing and signing this Certificate,please return it to the Building Division in order to final your building permit.
SB407 2015.doc revised 01/05/17
SunPower® InvisiMount™ | Residential Mounting System
Simple and Fast Installation
• Integrated module-to-rail grounding
• Pre-assembled mid and end clamps
• Levitating mid clamp for easy placement
• Mid clamp width facilitates consistent, even
module spacing
• Simple, pre-drilled rail splice
• UL 2703 Listed integrated grounding
Flexible Design
• Addresses nearly all sloped residential roofs
• Design in landscape and portrait
• Rails enable easy obstacle management
Customer-Preferred Aesthetics
• #1 module and #1 mounting aesthetics
• Best-in-class system aesthetics
• Premium, low-profile design
• Black anodized components
• Hidden mid clamps and end clamps
and capped, flush rails
Part of Superior System
• Built for use with SunPower DC and AC modules
• Best-in-class system reliability and aesthetics
• Combine with SunPower modules and
monitoring app
sunpower.com
Elegant Simplicity
SunPower® InvisiMount™ is a SunPower-designed
rail-based mounting system. The InvisiMount system
addresses residential sloped roofs and combines faster
installation time, design flexibility, and superior aesthetics.
The InvisiMount product was specifically envisioned and
engineered to pair with SunPower modules. The resulting
system-level approach will amplify the aesthetic and
installation benefits for both homeowners and installers.
Datasheet
SunPower® InvisiMount™ | Residential Mounting System
InvisiMount Component Details
Component Material Weight
Mid Clamp Black oxide stainless steel AISI 304 63 g (2.2 oz)
End Clamp Black anodized aluminum alloy 6063-T6 110 g (3.88 oz)
Rail Black anodized aluminum alloy 6005-T6 830 g/m (9 oz/ft)
Rail Splice Aluminum alloy 6005-T5 830 g/m (9 oz/ft)
Ground Lug
Assembly
304 stainless
(A2-70 bolt; tin-plated copper lug)106.5 g/m (3.75 oz)
End Cap Black acetal (POM) copolymer 10.4 g (0.37 oz)
Roof Attachment Hardware Supported by
InvisiMount System Design Tool
Application
• Composition Shingle Rafter Attachment
• Composition Shingle Roof Decking Attachment
• Curved and Flat Tile Roof Attachment
• Universal Interface for Other Roof Attachments
InvisiMount Operating Conditions
Temperature −40° C to 90° C (−40° F to 194° F)
Max. Load (LRFD)• 3000 Pa uplift
• 6000 Pa downforce
Roof Attachment Hardware Warranties
Refer to roof attachment hardware manufacturer’s documentation.
InvisiMount Warranties And Certifications
Warranties
• 25-year product warranty
• 5-year finish warranty
Certifications
• UL 2703 Listed
• Class A Fire Rated
*Module frame that is compatible with the InvisiMount system required for hardware interoperability.
© 2015 SunPower Corporation. All Rights Reserved. SUNPOWER, the SUNPOWER logo, and INVISIMOUNT are trademarks or registered
trademarks of SunPower Corporation. All other trademarks are the property of their respective owners.
Specifications included in this datasheet are subject to change without notice.
InvisiMount Component Images
Module* / Mid Clamp and Rail
Mid Clamp End Clamp Rail & Rail Splice Ground Lug Assembly End Cap
Module* / End Clamp and Rail
sunpower.com
Document #509506 RevC
Datasheet
Optimize System and Installation Efficiency
SunPower® AC Modules, which include a factory-integrated
SunPower microinverter, provide a revolutionary combination of high
efficiency, high reliability, and module-level DC-to-AC power conversion.
Designed specifically for use with SunPower InvisiMount™ and the
SunPower Monitoring System, SunPower AC Modules enable rapid
installation, best-in-class system aesthetics, and intuitive visibility into
system performance. All this comes with the best Combined Power
and Product Warranty.
Design-Driven Advantages
#1 module aesthetics and efficiency¹
Unmatched module reliability2
No electrolytic capacitors
25-year Combined Power and Product
Warranty
Maximize Value for Roof
Size system for roof, not string inverter
Optimize performance of each module
Expand Deployment Options
Complex roofs and partial shading
Small systems
System expandability
Simplify & Speed Installation
Factory-integrated microinverter
Robust, double-locking AC connectors
Design flexibility offsite and onsite
No DC string sizing process
Fewer installation steps than competing
systems
Intuitive commissioning
Component of Complete System
Built for use with SunPower® InvisiMount™
and the SunPower Monitoring System
Superior system reliability and aesthetics
sunpower.com
SunPower® X22-360-C-AC | Residential AC Module Series
Document # 516046 Rev C /LTR_US
Mechanical Data
Solar Cells 96 Monocrystalline Maxeon® Gen III
Front Glass High-transmission tempered glass with anti-
reflective coating
Environmental
Rating Outdoor rated
Frame Class 1 black anodized (highest AAMA rating)
Weight 45.5 lbs (20.6 kg)
Max.
Recommended
Module Spacing
1.3 in. (33 mm)
Warranties and Certifications
Warranties 25-year limited power warranty
25-year limited product warranty
Certifications
UL 1741, including compliance with
applicable requirements of IEEE 1547 and
IEEE 1547.1
FCC and ICES-003 Class B
AC module Type 2 Fire Rated
UL 2703 Listed when installed with
InvisiMount™
Class A Fire Rated when installed with
InvisiMount™ and when distance between
roof surface and bottom of SunPower
module frame is ≤ 3.5“ (8.89 cm)
Alternating Current (AC) Module designation
enables installation in accordance with NEC
690.6
PID Test Potential-induced degradation free
[11.02 in]
280 mm
1558 mm
[61.3 in]
1107 mm
[43.6 in] 46 mm1046 mm
[41.2 in]
30 mm
[1.2 in] [1.8 in]
Please read the safety and installation instructions for details.
Power Data
SPR-X22-360-C-AC
Nominal Power3 (Pnom) 360 W
Power Tolerance +5/-0%
Avg. Panel Efficiency4 22.2%
Temp. Coef. (Power) –0.30%/o C
Shade Tolerance
• Three bypass diodes
• Integrated module-level maximum power
point tracking
AC Electrical Data
Output @ 240 V (min./nom./max.)
Output @ 208 V (min./nom./max.)
211/240/264 V
183/208/229 V
Operating Frequency (min./nom./max.) 59.3/60.0/60.5 Hz
Output Power Factor (min.) 0.99
AC Max. Continuous Output Current @ 240 V
AC Max. Continuous Output Current @ 208 V
1.33 A
1.54 A
AC Max. Cont. Output Power 320 W
DC/AC CEC Conversion Efficiency 96.0%
Max. Units Per 20 A Branch Circuit @ 240 V
Max. Units Per 20 A Branch Circuit @ 208 V
12 (single phase)
10 (two pole)
Tested Operating Conditions
Operating Temp. –40° F to +185° F (–40° C to +85° C)
Max. Ambient Temp. 122° F (50° C)
Max. Load Wind: 62 psf, 3000 Pa, 305 kg/m² front & back
Snow: 125 psf, 6000 Pa, 611 kg/m² front
Impact Resistance 1 inch (25 mm) diameter hail at 52 mph (23
m/s)
©2016 SunPower Corporation. All rights reserved. SUNPOWER, the SUNPOWER logo, MAXEON, and INVISIMOUNT
are trademarks or registered trademarks of SunPower Corporation in the U.S. and other countries as well.
Specifications included in this datasheet are subject to change without notice.
See www.sunpower.com/facts for more reference information. For more details, see extended datasheet: www.sunpower.com/datasheets.
¹Highest of over 3,200 silicon solar panels, Photon Module Survey, Feb. 2014
2#1 rank in "PV Module Durability Initiative Public Report," Fraunhofer CSE, Feb 2013. Five out of the top eight largest manufacturers were tested. Campeau, Z. et al. "SunPower Module Degradation Rate," SunPower white paper, Feb 2013. See www.sunpower.com/facts for details.
3Standard Test Conditions (1000 W/m² irradiance, AM 1.5, 25° C). NREL calibration standard: SOMS current, LACCS FF and voltage. All DC voltage is fully contained within the module.
4Based on average of measured power values during production.
SunPower® X22-360-C-AC | Residential AC Module Series
PV1.1
SITE PLAN
SHEET
DATE
5/17/2017
DESIGNED
KS
DRAWN
JK
CHECKED
MZ
SCALE
SOLAR TECHNOLOGIES
705 N BRANCIFORTE AVE
SANTA CRUZ, CA 95062
PHONE: (831) 920-4918
LIC: CSLB 932914 C10, C46
PROJECT
PHOTOVOLTAIC INSTALLATION
WOOLPERT RESIDENCE
21717 RAINBOW DR
CUPERTINO, CA 95014
R AIN BO W D R
60'
ɓ
MAIN SERVICE PANEL
ROOFTOP
PV ARRAY
ɓ
ɓ
4 0 ' E S M T
NEW SOLAR SUBPANEL
IN GARAGE
EXISTING SINGLE
FAMILY DWELLING
EXISTING POOL
Jasmine
Archbold07/17/17
SHEET
DATE
5/17/2017
DESIGNED
KS
DRAWN
JK
CHECKED
MZ
SCALE
SOLAR TECHNOLOGIES
705 N BRANCIFORTE AVE
SANTA CRUZ, CA 95062
PHONE: (831) 920-4918
LIC: CSLB 932914 C10, C46
PROJECT
PHOTOVOLTAIC INSTALLATION
WOOLPERT RESIDENCE
21717 RAINBOW DR
CUPERTINO, CA 95014 PV1
VICINITY MAP
SCOPE OF WORK PHOTOVOLTAIC - RESIDENTIAL FLUSH
ROOF MOUNT, GRID TIED.
SYSTEM SIZE 6.48 kW (DC STC)
PROJECT ADDRESS 21717 RAINBOW DR
APN / JURISDICTION 366-37-006 / CITY OF CUPERTINO
PROPERTY OWNER WOOLPERT, ROSE ANN
OWNER'S ADDRESS 21717 RAINBOW DR
CUPERTINO, CA 95014
OWNER'S PHONE (408) 996-8007
PROJECT VALUATION: $31,428
CODE SUMMARY
2016 CALIFORNIA ELECTRICAL CODE (CEC)
ARTICLE 690, 705, 250, 310 ET AL
2016 CALIFORNIA BUILDING CODE (CBC)
2016 CALIFORNIA FIRE CODE (CFC)
ARTICLE 605.11
2016 CALIFORNIA RESIDENTIAL CODE (CRC)
ABBREVIATIONS USED
EMT ELECTRICAL METALLIC TUBING
GND GROUND
O.C. ON CENTER
MC METAL CLAD
OCPD OVERCURRENT PROTECTION DEVICE
PV PHOTOVOLTAIC
SHEET INDEX
PV1 COVER
PV1.1 SITE PLAN
PV2 GARAGE ROOF PLAN
PV2.1 RAFTER DETAIL
PV3 MOUNTING DETAILS
PV4 ELECTRICAL DIAGRAM
PV5 ELECTRICAL NOTES
PV6 SIGNAGE DETAILS
NTS
SOLAR PHOTOVOLTAIC INSTALLATIONSOLAR PHOTOVOLTAIC INSTALLATION
Jasmine
Archbold
07/17/17
07/17/17
B-2017-1141
Jasmine Archbold
PV2.1
RAFTER DETAIL
SHEET
DATE
5/17/2017
DESIGNED
KS
DRAWN
JK
CHECKED
MZ
SCALE
SOLAR TECHNOLOGIES
705 N BRANCIFORTE AVE
SANTA CRUZ, CA 95062
PHONE: (831) 920-4918
LIC: CSLB 932914 C10, C46
PROJECT
PHOTOVOLTAIC INSTALLATION
WOOLPERT RESIDENCE
21717 RAINBOW DR
CUPERTINO, CA 95014
3/8"
NOTE: 2X6 TRUSSES EVERY 24" O.C.
7' MAX SPAN < 10'-4" SO OK.
ARRAY DEAD LOAD CALCULATION
COMPONENT QTY. LBS/UNIT TOTAL
MODULE 18 45.5 819
MOUNTING RAIL 126' 1.0 PLF 126
STANCHION 24 1.8 43
TOTAL 988
ARRAY AREA (SF) 323
DISTRIBUTED DEAD LOAD (PSF) 3.05
CONCENTRATED DEAD LOAD (LBS) 41.2
7'
7'
7'
Jasmine
Archbold07/17/17
PV2
GARAGE ROOF PLAN
KEYED SHEET NOTES
1. 39 $55$< ,6 02'8/(6 $=,087+ ,6 7,/7
,6
2. MOUNTING SYSTEM IS SUNPOWER INVISIMOUNT
WITH 2" MOUNTING RAIL.
3. STANCHIONS ARE SOLAR ROOF HOOK 17520
SPANISH TILE ROOF HOOK.
4. NEW SOLAR SUBPANEL
5. EXISTING MAIN SERVICE PANEL IS SOLAR POINT
OF CONNECTION.
SHEET NOTES
x
ROOF IS CLAY TILE IN GOOD CONDITION, 1
STORY, 4:12 ROOF PITCH, 2X6 TRUSSES @ 24"
O.C.
x
PV MODULES ARE (18) SUNPOWER
SPR-X22-360-C-AC, MODULE DIMENSIONS ARE
61.4" X 41.2" X 1.81", MODULE WEIGHT IS 45.5 LBS.
x
INSTALLERS NOTE: STUB DOWN CONDUIT UNDER
ARRAY AND RUN INTERNAL TO NEW SOLAR
SUBPANEL.
SHEET
DATE
5/17/2017
DESIGNED
KS
DRAWN
JK
CHECKED
MZ
SCALE
SOLAR TECHNOLOGIES
705 N BRANCIFORTE AVE
SANTA CRUZ, CA 95062
PHONE: (831) 920-4918
LIC: CSLB 932914 C10, C46
PROJECT
PHOTOVOLTAIC INSTALLATION
WOOLPERT RESIDENCE
21717 RAINBOW DR
CUPERTINO, CA 95014
3/16"
CUSTOMER HEREBY ACKNOWLEDGES AND AGREES TO THE SYSTEM DESIGN AS
DETAILED IN THESE PLANS. ANY CHANGES AGREED UPON BY THE CUSTOMER
AND SOLAR TECHNOLOGIES SHALL BE NOTED IN RED PEN IN THE PLANS AND
INITIALED AND DATED BY BOTH PARTIES.
X ___________________________________________
21'
SLOPE
4:12
3' MIN
3' MIN
3' MIN
1 2 3
4 5
Jasmine
Archbold07/17/17
PV3
MOUNTING DETAILS
SHEET
DATE
5/17/2017
DESIGNED
KS
DRAWN
JK
CHECKED
MZ
SCALE
SOLAR TECHNOLOGIES
705 N BRANCIFORTE AVE
SANTA CRUZ, CA 95062
PHONE: (831) 920-4918
LIC: CSLB 932914 C10, C46
PROJECT
PHOTOVOLTAIC INSTALLATION
WOOLPERT RESIDENCE
21717 RAINBOW DR
CUPERTINO, CA 95014
AS NOTED
2
3
STANCHION DETAIL
SCALE: 3" = 1'
ASSEMBLY DETAIL - SECTION VIEW
SCALE: 1 1/2" = 1'
KEYED SHEET NOTES
1. PV MODULE
2. SUNPOWER INVISIMOUNT 2" MOUNTING RAIL, 8'
MAX SPAN BETWEEN STANCHIONS
3. INVISIMOUNT MODULE CLAMPS
4. STANCHION: SOLAR ROOF HOOK 17520, (2) 1/4" X
3" LAG SCREWS TO RAFTER, 2.5" RAFTER
EMBED.
5. 2X6 TRUSSES @ 24" O.C.
1
ARRAY DETAIL - PLAN VIEW
SCALE: 1/2" = 1'
32" MAX 8' MAX
1 2 3 4
5
5
1
3
2
4
4
Jasmine
Archbold07/17/17
PV4
ELECTRICAL DIAGRAM
2P
40A
2P
200A
(3) #8 THWN-2
#10 GND
3/4" EMT
EQUIPMENT SCHEDULE
1. PV MODULES ARE (18) SUNPOWER
SPR-X22-360-C-AC (240V), 2 BRANCH
CIRCUITS.
2. NEMA 3R ROOFTOP JUNCTION BOX TO
TRANSITION SUNPOWER AC CABLE IN
FREE AIR TO THWN-2 IN EMT.
3. SUNPOWER PRODUCTION
MONITORING DEVICE
4. NEW SOLAR SUBPANEL IS 120/240
VAC, 125A BUS, 15A MONITORING
OCPD, (2) 20A SOLAR OCPDS.
5. EXISTING MAIN SERVICE PANEL IS
120/240 VAC, 200A BUS, 200A MAIN
OCPD, 40A NEW SOLAR SUBPANEL
OCPD.
SHEET
DATE
5/17/2017
DESIGNED
KS
DRAWN
JK
CHECKED
MZ
SCALE
SOLAR TECHNOLOGIES
705 N BRANCIFORTE AVE
SANTA CRUZ, CA 95062
PHONE: (831) 920-4918
LIC: CSLB 932914 C10, C46
PROJECT
PHOTOVOLTAIC INSTALLATION
WOOLPERT RESIDENCE
21717 RAINBOW DR
CUPERTINO, CA 95014
NTS
(3) #12 THWN-2
#12 GND
EMT
SUNPOWER AC CABLE
INTEGRATED GROUND
FREE AIR
(4) #10 THWN-2
#10 GND
3/4" EMT
OR
#10 TYPE NM
#10 GND
INTERNAL
MONITORING USED
PV
SUPERVISOR
5X (PVS5x)
SUNPOWER WEB ENABLED PRODUCTION
MONITORING SYSTEM CONNECTS TO
TWO POLE BREAKER.
2P
20A
2P
20A
2P
15A
1
2
3
4
5
Jasmine
Archbold07/17/17
PV5
ELECTRICAL NOTES
DESIGN AMBIENT TEMPERATURES (FROM ASHRAE)
LOCATION USED MOFFETT FIELD
LOW TEMPERATURE &
HIGH TEMPERATURE &
SHEET
DATE
5/17/2017
DESIGNED
KS
DRAWN
JK
CHECKED
MZ
SCALE
SOLAR TECHNOLOGIES
705 N BRANCIFORTE AVE
SANTA CRUZ, CA 95062
PHONE: (831) 920-4918
LIC: CSLB 932914 C10, C46
PROJECT
PHOTOVOLTAIC INSTALLATION
WOOLPERT RESIDENCE
21717 RAINBOW DR
CUPERTINO, CA 95014
NTS
NOTES FOR AC CIRCUITS
1. SIZE CONDUCTOR SUPPLY FEEDS AND OVERCURRENT DEVICES BASED ON CEC
TABLE 310.15(B)(16). USE GREATER OF MAXIMUM INVERTER OUTPUT CURRENT
CORRECTED FOR CONTINUOUS DUTY (1.25 FACTOR) OR MAXIMUM INVERTER
OUTPUT CURRENT CORRECTED FOR MAXIMUM AMBIENT TEMPERATURE AND
MULTIPLE CONDUCTORS.
2. SUM OF INVERTER OCPDS AND SUPPLY FEEDS SHALL NOT EXCEED 120% OF THE
RATING OF THE BUS BARS OR OR CONDUCTORS PER CEC 705.12(D)(2)(3)(B).
3. IF THE SUM OF THE SUPPLY FEEDS TO A BUS BAR EXCEEDS 100% OF THE BUS BAR
RATING, LOCATE FEEDS AT OPPOSITE ENDS OF THE BUS BAR PER CEC
705.12(D)(2)(3)(B).
GROUNDING NOTES
1. ARRAY GROUNDING WITH INVISIMOUNT UL LISTED GROUNDING SYSTEM.
2. MODULES GROUNDED WITH SUNPOWER AC CABLE
3. MOUNTING RAILS GROUNDED TO MODULES WITH INVISIMOUNT GROUNDING MODULE
CLAMPS. DETAIL BELOW.
4. EQUIPMENT GROUNDING CONDUCTORS SHALL BE INSTALLED IN ACCORDANCE WITH
NEC 690.43-50 AND SIZED PER NEC 250.122.
AC DISCONNECT LABELING
PHOTOVOLTAIC POWER SOURCE AC POINT OF CONNECTION
AC OUTPUT CURRENT: 1.33 A X 18 = 23.9 A
OPERATING VOLTAGE: 240 V
THIS PANEL FED BY MULTIPLE SOURCES (UTILITY AND SOLAR)
TEETH
PIERCE
ANODIZED
LAYER
MOUNTING
RAIL
BONDING
MID CLAMP
MODULE
FRAME
ACPV MODULE SPECIFICATIONS
MAKE SUNPOWER
MODEL SPR-X22-360-C-AC
DC NOMINAL POWER 360 W
MAX AC OUTPUT POWER 320 W
NOMINAL AC VOLTAGE 240 V
MAX AC OUTPUT CURRENT 1.33 A
MAX OCPD RATING 20 A
MAX UNITS PER BRANCH 12
1
GROUNDING DETAIL
SCALE: 6" = 1'
Jasmine
Archbold07/17/17
PV6
SHEET
DATE
5/17/2017
DESIGNED
KS
DRAWN
JK
CHECKED
MZ
SCALE
SOLAR TECHNOLOGIES
705 N BRANCIFORTE AVE
SANTA CRUZ, CA 95062
PHONE: (831) 920-4918
LIC: CSLB 932914 C10, C46
PROJECT
PHOTOVOLTAIC INSTALLATION
WOOLPERT RESIDENCE
21717 RAINBOW DR
CUPERTINO, CA 95014
NTS
SIGNAGE DETAILS
SIGNAGE NOTES
1. SIGNAGE IN ACCORDANCE WITH CEC 690, 705 AND CFC 605.11.
2. OUTDOOR SIGNAGE SHALL BE REFLECTIVE, UV STABLE, AND
SUITABLE FOR ITS ENVIRONMENT PER UL STANDARD 969.
3. SIGNS SHALL HAVE RED BACKGROUND WITH WHITE
LETTERING THAT IS ALL CAPS, ARIAL OR SIMILAR FONT, WITH
3/8" MIN LETTER HEIGHT, AND BE PLACED ON ALL COMBINERS,
JUNCTION BOXES AND RACEWAYS.
4. AT POINT OF CONNECTION "AC OPERATING CURRENT ____,"
AC OPERATING VOLTAGE ____."
5. ALL DISCONNECTS SHALL HAVE "WARNING: ELECTRIC SHOCK
HAZARD. DO NOT TOUCH TERMINALS, BOTH LINE AND LOAD
SIDES MAY BE ENERGIZED IN THE OPEN POSITION."
SOLAR DISCONNECT
WARNING - ELECTRIC SHOCK HAZARD
DO NOT TOUCH TERMINALS
TERMINALS ON BOTH LINE AND LOAD SIDES
MAY BE ENERGIZED IN THE OPEN POSITION
WARNING - DUAL POWER SOURCES
SECOND SOURCE IS A PHOTOVOLTAIC SYSTEM
WARNING: INVERTER OUTPUT
CONNECTION. DO NOT RELOCATE
THIS OVERCURRENT DEVICE.
PHOTOVOLTAIC POWER SOURCE AC
POINT OF CONNECTION
AC OUTPUT CURRENT: 23.9 A
OPERATING VOLTAGE: 240 V
THIS PANEL FED BY MULTIPLE SOURCES
(UTILITY AND SOLAR)
2
AC DISCONNECT
NTS
1
MAIN SERVICE PANEL
NTS
3
AC DISCONNECT LABELING
NTS
4
SOLAR OCPD
NTS
PHOTOVOLTAIC SYSTEM EQUIPPED
WITH RAPID SHUTDOWN
5
MAIN SERVICE PANEL
NTS
Jasmine
Archbold07/17/17
QIMS.E466981
Mounting Systems, Mounting Devices, Clamping Devices and Ground Lugs for
Use with Photovoltaic Modules and Panels
Page Bottom
Mounting Systems, Mounting Devices, Clamping Devices and Ground Lugs for Use
with Photovoltaic Modules and Panels
See General Information for Mounting Systems, Mounting Devices, Clamping Devices and Ground Lugs for Use with Photovoltaic Modules and
Panels
SUNPOWER CORP E466981
77 RIO ROBLES
SAN JOSE,CA 95134 USA
Cat. No.
Investigated
for
Bonding
Investigated
for
Mechanical
Loading
System Fire
Classification
(A, B or C)
Tested in
Combination
With
Photovoltaic mounting system
InvisiMount - consisting
of the following
components: L-Foot,
Rail, Rail Splice, Mid
Clamp, Ground Lug
Assembly
Y Y A UL Listed PV Modules:
Sunpower Corp: Models SPR-XYY-###, where YY
represents numbers 18, 19, 20 or 21, and ###
represents any number from 365 to 310 and 274 to
233; SPR-EYY-###, where YY represents numbers
18, 19, 20 or 21, and ### represents any number
from 345 to 285 and 250 to 225. All models identified
must have the Gen 5 frame and have a Type 2 module
characterization.
Y Y A NRTL Listed:
SPR-XXXE/NE-WHT/BLK-U-YYYACPV and SPR-V-
WW-XXX-Y-Z-G-AC, where "XXX" is the wattage of the
panel and ranges from 250 to 225; and where "YYY"
indicates the inverter voltage used in the module, and
can be blank, 240 or 208/240. All models identified
must have the Gen 5 frame and have a Type 2 module
characterization.
Last Updated on 2015-03-12
Questions?Print this page Terms of Use Page Top
© 2015 UL LLC
When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment database
for additional information regarding this product's certification.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading
manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format:
"© 2015 UL LLC".
QIMS.E466981 - Mounting Systems, Mounting Devices, Clamping Devi...http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpa...
1 of 1 7/21/2015 9:57 AM