Loading...
14070106CITY OF CUPERTINO BUILDING PERMIT BUILDING ADDRESS: 10795 MINETTE DR CONTRACTOR: SOLARCITY PERMIT NO: 14070106 OWNER'S NAME: ALEXANDER KIM 3055 CLEARVIEW WAY DATE ISSUED: 07/23/2014 OWNER'S PHONE: 4158125784 SAN MATEO, CA 94402 PHONE NO: (650) 638-1028 DECLARATION JOB DESCRIPTION: RESIDENTIAL E] COMMERCIAL ❑ LICENSED CONTRACTOR'S INSTALL 12 ROOF TOP, FLUSH MOUNTED PV PANELS License ClassGl'� Li,. # q`24Z( 0" (3.06 Contractor 5Cy41NLC. t -'`rt' Date ami — Z / KW) I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. I hereby affirm under penalty of perjury one of the following two declarations: I have and will maintain a certificate of consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the erfiormance of the work for which this permit is issued. Sq. Ft Floor Area: ave and will maintain Worker's Compensation Insurance, as provided for by APN Number: 37532053.00 Occupancy Type: Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is PERMIT EXPIRES IF WORK IS NOT STARTED correct. I agree to comply with all city and county ordinances and state laws relating WITHIN 180 DAYSPERMIT ISSUANCE OR to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save 180 DAYS LFALLED INSPECTION. indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the Iss Date: granting of this permit. Additionally, the applicant understands and will comply with all non -point s urce regulations per the Cupertino Municipal Code, Section RE -ROOFS: 9.18. Z Signature Date d C �3 (� All roofs shall be inspected prior to any roofing material being installed. If a roof is installed without first obtaining an inspection, I agree to remove all new materials for inspection. ❑ OWNER -BUILDER DECLARATION_ Signature of Applicant: Date: 1 hereby affirm that I am exempt from the Contractor's License Law for one of the following two reasons: ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec.7044, Business & Professions Code) 1, as owner of the property, am exclusively contracting with licensed contractors to HAZARDOUS MATERIALS DISCLOSURE construct the project (Sec.7044, Business & Professions Code). I have read the hazardous materials requirements under Chapter 6.95 of the California Health & Safety Code, Sections 25505, 25533, and 25534. 1 will I hereby affirm under penalty of perjury one of the following three maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the declarations: Ilealth & Safety Code, Section 25532(a) should I store or handle hazardous 1 have and will maintain a Certificate of Consent to self -insure for Worker's material. Additionally, should I use equipment or devices which emit hazardous Compensation, as provided for by Section 3700 of the Labor Code, for the air contaminants as defined by the Bay Area Air Quality Management District I performance of the work for which this permit is issued. will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and I have and will maintain Worker's Compensation Insurance, as provided for by for the work for which this the Health & Safety Code, Se ti s 2 O5, 5533, and 25534. 6A, �3 Section 3700 of the Labor Code, the performance of Owner or authorized agent: Date: permit is issued. I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Worker's CONSTRUCTION LENDING AGENCY Compensation laws of California. If, after making this certificate of exemption, I become subject to the Worker's Compensation provisions of the Labor Code, I must I hereby affirm that there is a construction lending agency for the performance of forthwith comply with such provisions or this permit shall be deemed revoked. work's for which this permit is issued (Sec. 3097, Civ C.) Lender's Name APPLICANT CERTIFICATION Lender's Address I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save ARCHITECT'S DECLARATION indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the I understand my plans shall be used as public records. granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section Licensed Professional 9.18. Signature _ Date CUPERTINO 1�W ALTERNATIVE ENERGY PERMIT APPLICATION \v COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION 10300 TORRE AVENUE • CUPERTINO, CA 95014-3255 AE (408) 777-3228 • FAX (408) 777-3333 • build ing(akupertino.org \ JO PROTECT ADDRESS j J� , A t bb�APN# _ 0 OWNER NAME PHONE S E-MAIL STREET ADDRESS` A T- A2 CITY, STATE.ZIP �0fv-nNCD �4 FAX CONTACT NAME / f i� J_ �— I� PHS SC! S �' E � VI L')� J�V STREET ADDRESS Z� _.-�1 CITY, STATE, ZIP FAX ER -BUILDER OWNER AGENT G CON'TR4CTOR ❑ CONTRACTOR AGENT ❑Nn El OWNER OWNElN ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT CONTRACTOR NAMED ` LICENSE NUMBER LICENSE TYPE ! tI BUS. LIC # COMPANY NAME s c�c.,tvLG t ( E-MAIL fa C c, r FAX STREET ADDRESS SS CITY, STATE, ZIP �• Q� R4uoZ PHONE v• o ARCHITECT/ENGINEER NAME LICENSE NUMBER BUS. LIC # COMPANY NAME E-MAIL FAX STREET ADDRESS CITY, STATE, ZIP PHONE USE OF SFD or Duplex ❑ Multi -Family STRUCTURE: E] Commercial PROJECT IN WILDLAND URBAN INTERFACE AREA ❑ Yes ❑ No PROTECT IN FLOOD ZONE ❑ Yes ❑ NO LAR PANELS ❑ ELECTRIC VEHICLE CHARGING STATION T��ATER HEATING ❑ OTHER: FOR SOLAR PANELS. NUMBER OF PANELS/UNITS: KILOWATTS (COMMERCIAL ONLY): 3. 0'� TOTAL VALUATION: ©Q DESCRIPTION OF WORK c� Z%00f?-1-0 SCD 4A -A_ tZ By my signature below, I certify to each of the following: I am the property owner or authorized agent to on ropei r ave read this application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. e to comply with all applicable local ordinances and state laws relatin u construction. I authorize representatives of Cupertino to enter the above -identified property for inspection purposes. Signature of Applicant/Agent: Date: SUP EMENTAL INFORMATION REQUIRED OFFICE USE ONLY ❑ OVER-THE-COUNTER F 1 ❑ EXPRESS U U ❑ STANDARD < ❑ LARGE ❑ '.1LAJOR PVApp_2011.doc revised 03/16/11 IN CITY OF CUPERTINO FEE ESTIMATOR - BUILDING DIVISION ADDRESS: 10795 MINETTE DR DATE: 07/23/2014 REVIEWED BY: MELISSA APN: 375 32 053 BP#: ( `VALUATION: $7,000 PERMIT TYPE: Building Permit PLAN CHECK TYPE: Alteration / Repair PRIMARY PENTAMATION SOLAR -RES ..n,.. SFD or Duplex PERMIT TYPE: WORK INSTALL 12 ROOF TOP, FLUSH MOUNTED PV PANELS 3.06 k SCOPE - - Boz n_1--7 NOTE: This estimate does not include jeer due to other uepartments pe. rtammng, ruauc rr urna, /' a c, "I. .1y .�crrw ...... •. y �. tho Aunt fnr addn'I info. Jilstrlct, er" . mese ees urr uuecu w....o .. FEE ITEMS (Fee Resolution 11-053 Eff.' 711!13) »-»-.---- FEE _.-_ _. - QTY/FEE --__ --_- ___ MISC ITEMS Plan Check Fee: $0.00 1 # $236.00 Alternative Energy System IPHOTOVRES Photovoltaic System Suppl. PC Fee: Q Reg. Q Ol 0.0 hrs $0.00 PME Plan Check: $0.00 Permit Fee: $0.00 Suppl. Insp. Fee.S Reg. Q 01 p.Q hrs $0.00 PME Unit Fee: $0.00 PME Permit Fee: $0.00 Work Without Permit? 0 Yes No $0.00 Advanced Planning Fee: $0.00 Select a Non -Residential Building or Structure O O A �; ,�:1 t>�cr-rirrnlzrinrr 1, ��, Strong Motion Fee: IBSEISMICR $0.919 Select an Administrative Item Bide, Stds Commission Fee: IBCBSC $1.00 SUBTOTALS: $1.91 $236.00 TOTAL FEE: $237.9 Revised: 07/10/2014 ABBREVIATIONS A AMPERE AC ALTERNATING CURRENT BLDG BUILDING CONIC CONCRETE DC DIRECT CURRENT EGC EQUIPMENT GROUNDING CONDUCTOR (E) EXISTING EMT ELECTRICAL METALLIC TUBING GALV GALVANIZED GEC GROUNDING ELECTRODE CONDUCTOR GND GROUND HDG HOT DIPPED GALVANIZED I CURRENT Imp CURRENT AT MAX POWER Isc SHORT CIRCUIT CURRENT kVA KILOVOLT AMPERE kW KILOWATT LBW LOAD BEARING WALL MIN MINIMUM (N) NEW NEUT NEUTRAL NTS NOT TO SCALE OC ON CENTER PL PROPERTY LINE POI POINT OF INTERCONNECTION PV PHOTOVOLTAIC SCH SCHEDULE SS STAINLESS STEEL STC STANDARD TESTING CONDITIONS TYP TYPICAL UPS UNINTERRUPTIBLE POWER SUPPLY V VOLT Vmp VOLTAGE AT MAX POWER Voc VOLTAGE AT OPEN CIRCUIT W WATT 3R NEMA 3R, RAINTIGHT ITCFNSF CA # 888104 C-10 ELECTRICAL NOTES I JURISDICTION NOTES 1. WHERE ALL TERMINALS OF THE DISCONNECTING MEANS MAY BE ENERGIZED IN THE OPEN POSITION, A SIGN WILL BE PROVIDED WARNING OF THE HAZARDS PER ART. 690.17. 2. EACH UNGROUNDED CONDUCTOR OF THE MULTIWIRE BRANCH CIRCUIT WILL BE IDENTIFIED BY PHASE AND SYSTEM PER ART. 210.5. 3. A NATIONALLY—RECOGNIZED TESTING LABORATORY SHALL LIST ALL EQUIPMENT IN COMPLIANCE WITH ART. 110.3. 4. CIRCUITS OVER 250V TO GROUND SHALL COMPLY WITH ART. 250.97, 250.92(8) 5. DC CONDUCTORS EITHER DO NOT ENTER BUILDING OR ARE RUN IN METALLIC RACEWAYS OR ENCLOSURES TO THE FIRST ACCESSIBLE DC DISCONNECTING MEANS PER ART. 690.31(E). 6. ALL WIRES SHALL BE PROVIDED WITH STRAIN RELIEF AT ALL ENTRY INTO BOXES AS REQUIRED BY UL LISTING. 7. MODULE FRAMES SHALL BE GROUNDED AT THE UL—LISTED LOCATION PROVIDED BY THE MANUFACTURER USING UL LISTED GROUNDING HARDWARE. 8. MODULE FRAMES, RAIL, AND POSTS SHALL BE BONDED WITH EQUIPMENT GROUND CONDUCTORS AND GROUNDED AT THE MAIN ELECTRIC PANEL. 9. THE DC GROUNDING ELECTRODE CONDUCTOR SHALL BE SIZED ACCORDING TO ART. 250.166(8) & 690.47. MODULE GROUNDING METHOD: ZEP SOLAR I AHJ: Cupertino UTILITY: Pacific Gas and Electric Company GENERAL NOTES 1. THIS SYSTEM IS GRID—INTERTIED VIA A UL—LISTED POWER—CONDITIONING INVERTER. 2. THIS SYSTEM HAS NO BATTERIES, NO UPS. 3. SOLAR MOUNTING FRAMES ARE TO BE GROUNDED. 4. ALL WORK TO BE DONE TO THE 2013 CALIFORNIA BUILDING CODE AND THE 2013 CALIFORNIA RESIDENTIAL CODE. 5. ALL ELECTRICAL WORK SHALL COMPLY WITH THE 2011 NATIONAL ELECTRIC CODE AS AMENDED BY THE 2013 CALIFORNIA ELECTRIC CODE. CONFIDENTIAL — THE INFORMATION HEREIN M NUMBER: JB -9503123 00 CONTAINED SHALL NOT BE USED FOR THE l �""•"� BENEFIT OF ANYONE EXCEPT SOLARCITY INC., MOUNTING SYSTEM: NOR MALL IT BE DISCLOSED IN WHOLE OR IN ZEP Mighty Hook PART TO OTHERS OUTSIDE THE RECIPIENTS ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE MODULES: (12) Advantage Module SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN INVERTER: PERMISSION OF SOLARCITY INC. SOLAREDGE # SE3000A-US-ZB-U FLASHING WILL BE PAINTED TO MATCH EXTERIOR KIM, ALEXANDER 10795 MINETTE DR CUPERTINO, CA 95014 (415) 812-5784 VICINITY MAP rf' r 0 F1 CE el'o'i fLA",S CHECKED BY %' Zg t�A'lE RECEIVED PATE BLDG• DEPT• 'JUL 2 3 2014 se N610106 INDEX s w ;� s PV1 COVER SHEETPV2 SITE PLAN PV3 STRUCTURAL VIEWS T, PERTINO r I Attached •Ing• -..t k REVIEWED FOR CODE COMPLIANCE A' � x t� Fs' -. B01 1 1119 r Fad ©©©© 41-c 111 PN arm �r�r�nrA ,[1,rf#�t'r,,tE��•�© VKIM ~RESIDENCE 3.06 KW PV ARRAY PAGE NAME: COVER SHEET Jason Lucino �•�' ,SolarCitr l �""•"� 3055 Clearview Way Son Mateo, CA 94402 T:(650) CITY (7 5 F:9) w 636-1029 (888)—SOL—CITY (765-2489) www.solarcity.com SHEET: REV: DATE: PV 1 7 7 2014 I_1 I:.] U 0Z C 0 1 � 0 0 MOUNTING SYSTEM: NOR SHALL IT BE DISCLOSED IN WHOLE OR IN 0 CONFIDENTIAL — THE INFORMATION HEREIN JOB NUMBER: J[3-9503123 00 CONTAINED SHALL NOT BE USED FOR THE BENEFIT OF ANYONE EXCEPT SOLARCITY INC., MOUNTING SYSTEM: NOR SHALL IT BE DISCLOSED IN WHOLE OR IN ZEP Mighty Hook PART TO OTHERS OUTSIDE THE RECIPIENTS ISOLAREDGE ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE MODULES: (12) Advantage Module SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN INVERTER: PERMISSION OF SOLARCITY INC. # SE3000A—US—ZB—U PREMISE OWNER: KIM, ALEXANDER 10795 MINETTE DR CUPERTINO, CA 95014 (415) 812-5784 Front Of House Flashing to be painted to match exterior. PITCH: 22 ARRAY PITCH: 22 MP1 AZIMUTH: 217 ARRAY AZIMUTH: 217 MATERIAL: Flat Cement Tile STORY: 2 Stories PITCH: 22 ARRAY PITCH: 22 MP2 AZIMUTH: 217 ARRAY AZIMUTH: 217 MATERIAL: Flat Cement Tile STORY: 2 Stories 0 (E) UTILITY METER & WARNING LABEL Inv INVERTER W/ INTEGRATED DC DISCO & WARNING LABELS A DC DC DISCONNECT & WARNING LABELS AC AC DISCONNECT & WARNING LABELS O DC JUNCTION/COMBINER BOX & LABELS 0° DISTRIBUTION PANEL & LABELS Lc LOAD CENTER & WARNING LABELS f --IDEDICATED P, YPT f f40 `Q - :STANDOFF LbCIA IVer)artment CONDUIT RUN ON EXTERIOR ,CONDUIT RUN ON INTERIOR GATE/FENCE RP/IEV`v' TS qq4 )�� C%C AR,tV y r, -�e\ANT EQUIPidJ12, IS, SITE PLAN /T AL AR AY AREA (SF): 216 TOT RO F AREA (SF): 2793 Scale: 1/8" = 1' IQIAAY AREA IS a7.73 0 1' 8' 16' s PERC NT F TOTAL ROOF AREA DESCRIPTION: KIM RESIDENCE 3.06 KW PV ARRAY PACE NAME SITE PLAN DESIGN: Jason Lucina �\� ;;SolarCity l jJ Lter 3055 Clearhew Way Son Mateo, CA 94402 T:(650) 638-1028 F:(650) 638-1029 (B88)—SOL—CITY (765-2489) www.solarcity.com SHEET: REV: DATE: PV 2 7/7/2014 A SIDE VIEW OF MP1 NTS (E) 2x6 MPI X -SPACING X -CANTILEVER Y -SPACING Y -CANTILEVER NOTES LANDSCAPE 72" 24" 52" 52" 24" 24" PORTRAIT 48" 20" RAFTER C.J. 2X8 @ 24" OC 2x6 @24" OC ROOF AZI ARRAY AZI 217 PITCH 22 STORIES: 2 217 PITCH 22 Flat Cement Tile ZEP SPANNER BAR J" DIA BOLT & NUT (1) (2) (7) (3) ZEP SPANNER BAR CLAMP STANDOFF (E) TILE (I (E) ROOF DECKING (5) (4) 5/16" DIA LAG BOLT (2-1/2" EMBED, MIN) LOWEST MODULE SUBSEQUENT MODULES (E) RAFTER S 1 STANDOFF Scale: 1 1/2" = 1' INSTALLATION ORDER LOCATE RAFTER, MARK RAFTER LOCATION, AND REMOVE TILE. (1) PLACE STANDOFF BASE & DRILL PILOT HOLES AT THE RAFTER LOCATION. 2)CLEAN PAPER AROUND PILOT HOLE. 3) ADJUST STANDOFF TO BATTEN HEIGHT. SEAL PILOT HOLES AND BOTTOM (4) OF STANDOFF WITH POLYURETHANE SEALANT. 5) LAG STANDOFF INTO RAFTER. 6) NOTCH TILE WEATHERING TO FIT AROUND STANDOFF. 7) REINSTALL TILE. B SIDE VIEW OF MP2 NTS MP2 X -SPACING X -CANTILEVER Y -SPACING Y -CANTILEVER NOTES LANDSCAPE 72" 24" 52" 52" 24" 24" PORTRAIT 48" 20" RAFTER C.J. 2X8 @ 24" OC 2X6 @24" OC ROOF AZI ARRAY AZI 217 PITCH 22 217 PITCH 22 STORIES: 2 Flat Cement Tile CUPERTINO a Building Department JUL 2 3 2014 REVIEWED FOR CODE COMPLIANCE Reviewed By. CONFIDENTIAL —THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE JOB NUMBER: JB -9503123 00 r"`�'x Vm"" KIM, ALEXANDER KIM RESIDENCE Jason Lucina ��\�. ■ �;,;So�arCity. BENEFIT OF ANYONE EXCEPT SOLARCITY INC., 10795 MINETTE DR 3.06 KW PV ARRAY 00,1 MOUNTING SYSTEM: 13055 NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE THE RECIPIENT'S ZEP Mighty Hook 1 CUPERTINO, CA 95014 1 �'^--� 1,:, MODULES. ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE (12) Advantage Module PAGE NAME: Clearview Way San Mateo, CA 94402 SHEET: REV: DATE: SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF SOLARCITY INC. (415) 812-5784 STRUCTURAL VIEWS PV 3 7/7/2014 638-1028 F:(650) 638-1029 (888)—SOL—CITY (765-2489) www.solarcity.com INVERTER:T:(650) SOLAREDGE # SE3000A-US-ZB-U UPLIFT CALCULATIONS 07.07.2014 \�SolarCity. SleekMountTM PV System Version #37.4 Structural Desian Software Project Information & Table Of Contents Risk Category: II 10795 MINETTE DR 3.06 KW PV ARRAY PV System Type NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE THE RECIPIENT'S SolarCity SleekMount— CUPERTINO, CA 95014 Flat Tile Roof Flat Tile Roof Layers of Comp Roofing (12) Advantage Module PAGE NAME: 3055 Clearview Way San Mateo, CA 94402 Roof Slope SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF SOLARCITY INC. 221 PV 4 �/�/2014 Rafter S acin INVERTER: SOLAREDGE SE3000A—US—ZB—U 24" O.C. PV System Module Orientation Landscape and Portrait PV Module Area 211 sf PV Module Width 391, PV Module Length 65" Standoff Attachment Hardware Miqhty Hook HDG FT Reduced Ground/ Roof Live/Snow Loads Ground Snow Load Pg 0.0 PSI ASCE Table 7-1 Surrounding Roof Snow 0.0 Psf ASCE Eq: 7.4-1 Roof Snow Over PV Modules 0.0 Psf ASCE Eq: 7.4-1 Wind Design Criteria Wind Design Code ASCE 7-10 Wind Design Method Partially/Fully Enclosed Method Basic Wind Speed V 110 mph Fig. 26.5-1A Exposure Category C Section 26.7 Roof Style Gable Roof Rg. 30.4-2A/B/C-5A/B Mean Roof Height h 25 ft Section 26.2 Effective Wind Area 1 Module A 17.6 sf IBC 1509.7.1 Wind Pressure Calculation Coefficients Wind Pressure Exposure Kz 0.95 Table 30.3-1 Topographic Factor Kzt 1.00 Section 26.8 Wind Directionality Factor Kd 0.85 Section 26.6-1 Importance Factor I NA Velocity Pressure qh qh = 0.00256 (Kz) (Kzt) (Kd) (V^2) Equation 30.3-1 24.9 pslf Ext. Pressure Coefficient (Up) GCp (Up) -0.88 Fig. 30.4-2A/8/C-5A/B Ext. Pressure Coefficient Down GC Down 0.45 Fig. 30.4-2A/BIC-5A/B Design Wind Pressure P p = gh GC Equation 30.4-1 Wind Pressure Up P(UP) -21.8 psf Wind Pressure Down down 16.0 psf Allowable Standoff Spacings X -Direction Y -Direction Max Allowable Standoff Spacing Landscape 72" 52" Max Allowable Cantilever Landscape 24" 24" Standoff Configuration Landscape Not -Staggered Max Standoff Tributary Area Trib 26 sf PV Assembly Dead Load W -PV 3 psf Net Wind Uplift at Standoff T -actual -296 lbs '= { Uplift Capacity of Standoff T -allow 500 lbs Standoff Demand/Capacity DCR 59.3% Max Allowable Standoff Spacing Portrait 48" 52" Max Allowable Cantilever Portrait 20" 24" Standoff Configuration Portrait Not -Staggered Max Standoff Tributary Area Trib 17 sf PV Assembly Dead Load W -PV 3 psf Net Wind Uplift at Standoff T -actual -198 lbs Uplift Capacity of Standoff T -allow 500 lbs Standoff Demand/Capacity DCR 39.5% JPERTINO dingg3� Department li I't COMPLIANCE CONFIDENTIAL A THE INFORMATION HEREIN CONTAINED MALL NOT FO USED FOR THE JB -9503123 0 0 JOB NUMBER:\okll PREMISE OWNER: DESCRIPTION: KIM, ALEXANDER KIM RESIDENCE DESIGN: Jason Lucina �'iP SolarCity. MOUNTING SYSTEM: BENEFIT OF ANYONE EXCEPT SOLARCITY INC., 10795 MINETTE DR 3.06 KW PV ARRAY NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE THE RECIPIENT'S ZEP Mighty Hook CUPERTINO, CA 95014 1 I"�+� MODULES: ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE (12) Advantage Module PAGE NAME: 3055 Clearview Way San Mateo, CA 94402 SHEET: REV: DATE: SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF SOLARCITY INC. (415) 812-5784 UPLIFT CALCULATIONS PV 4 �/�/2014 T:(650) 638-1028 F:(650) 638-1029 (888) -SOL -CITY (765-2489) www.solarcity.com INVERTER: SOLAREDGE SE3000A—US—ZB—U GROUND SPECS MAIN PANEL SPECS GENERAL NOTES INVERTER SPECS MODULE SPECS LICENSE BOND (N) #8 GEC TO (N) GROUND ROD Panel Number: Square D Inv 1: DC Ungrounded INV 1 — (1) SOLAREDGESE3000A—US—ZB—U LABEL: A — (12) Advantage Module Poly, 60cell, Blck Frame, White Bcksht, ZEP CA # 888104 C-10 AT PANEL WITH IRREVERSIBLE CRIMP Meter Number: 1006676778 Inverter; 300## 0W, 240V, 97.5%; w/Unifed Disco and ZB, AFCI PV Module; 255W, INV 2 Overhead Service Entrance Voc: 37,7 Vpmax: 30,2 INV 3 Isc AND Imp ARE SHOWN IN THE DC STRINGS IDENTIFIER (E) 200A MAIN SERVICE PANEL E 20OA/2P MAIN CIRCUIT BREAKER Inverter 1 20OA/2P 3 SOLAREDGE SE3000A—US—ZB—U (E) LOADSLl17za71 SolarCity L2 N 2 A I 2OA/2P — — — — — — — _ _ _ _ EGCI DC+ DC+ m A r — — — — — — — —— ————— —— ————— ——————— ———— — — — — —— GEC ---�N DC DC_ I String(s) Of 12 On MP 1 EGCj EGC — —------———— —— — —— — — —--'-- —— — ---------------------------- I I I N i I I EGCIGEC — z z _-- GEC TO 120/240V i SINGLE PHASE UTILITY SERVICE i i I I Voc* = MAX VOC AT MIN TEMP 0I (1 ) SOUARE D # HgM220 PV BACKFEED BREAKER Breaker; 20A/2P, 2 Spaces /f, /—� A (1) Sox2 Sy 4 STRING JD, GROUNDED BOX DC 2x2 STRINGS, UNFUSED, GROUNDED — (1)Ground Rod; 5/8" x 8', Copper I )\ / r V (12)SOLAREDGE JiP300-2NA4AZS PowerBox Optimizer, 30OW, H4, DC to DC, ZEP CUPERTINO� 1 AWG 110, THWN-2, Black OIsh— (1) AWG 110, THWN-2, Red 1 )AWG 110, THWN-2, Black Voc* = 500 VDC Isc — 15 ADC O (1) AWG 110, THWN-2, Red Vmp — 350 VDC Imp— 8.63 ADC 9F (2)AWG 11 4 k Vgf*�lal r�VID,C 1 1155 ADC O (i) AWG 11� lid tlarq, _ er ECC " ' �3 ADC Lr 1 AWG 10, THWN-2, White NEUTRAL Vm = 240 VAC Im —12.5 AAC ( ) i P P— (1) AK 18,. THYM-2,. Green EGC/GEC 0 ) Conduit. Kit;. 3/4' (1 AWG 10, THWN-2, Green EGC — (1) Conduit Kit; 3 4 EMT ....... )...# ..............................Ki ./ �............. ` ............................. .............. J L 3 2014 .7 , , .- .EMT ..... ,� REVIEWED FOR CODE COMPLIANCE Reviewed By. CONFIDENTIAL —THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR THE JOB NUMBER: J B- 9 5 0 312 3 0 0 PREMISE OWNER: DESCRIPTION: KIM, ALEXANDER KIM RESIDENCE DESIGN: Jason Lucina �:,;So�arCity. w4 MOUNTING SYSTEM: BENEFIT OF ANYONE EXCEPT SOLARCITY INC., 10795 MINETTE DR 3.06 KW PV ARRAY NOR SHALL IT BE DISCLOSED IN WHOLE OR IN PART TO OTHERS OUTSIDE THE RECIPIENTS ZEP Mighty Hook CUPERTINO, CA 95014 MODULES ORGANIZATION, EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE (12) Advantage Module PAGE NAME: 3055 Gearview Way San Mateo, CA 94402 SHEET: REV: DATE: SOLARCITY PEERMSSIONEOFISOLARCITY INC. THE WRITTEN (41 5) 812-5784 ) THREE LINE DIAGRAM PV 5 7/7/2014 638-1029 (888) (SOL)CITY (765-2489) w,w.solarcty.com INVERTER: SOLAREDGE SE3000A-US-ZB-U Label Location: (C)(IC)(CB) Per Code: CRC R331.2 Label Location: (DC) (INV) Per Code: CEC 690.14.C.2 Label Location: (DC) (INV) Per Code: CEC 690.53 Label Location: (DC) (CB) Per Code: CEC 690.17 Label Location: (INV) Per Code: CEC 690.5(C) Label Location: (AC) (POI) Per Code: CEC 690.14.C.2 Label Location: (AC) (POI) Per Code: CEC 690.54 Label Location: (AC) Label Location: (DC) Per Code: CEC 690.17 Label Location: (POI) Per Code: CEC 705.12.D.7 Label Location: (POI) Per Code: CEC 690.54; CEC 690.17 Label Location: (D) (POI) Per Code: CEC 690.64.B.4 Label Location: (POI) Per Code: CEC 705.12.D.7 Label Location: (DC)(INV)(CB) Per Code: CEC 690.35(F) TO BE USED WHEN INVERTER IS UNGROUNDED CUPERTINO Building Department 1 2 3 2014 REAVl WED FOR CODE COMPLIANCE(AC): C Disconnect (C): CondWtvlewed By. (CB): Combiner Box (D): Distribution Panel (DC): DC Disconnect (IC): Interior Run Conduit (INV): Inverter With Integrated DC Disconnect (LC): Load Center (M): Utility Meter (POI): Point of Interconnection CONFIDENTIAL — THE INFORMATION HEREIN CONTAINED SHALL NOT BE USED FOR r��i7�j 3055 Cleaview Way THE BENEFIT OF ANYONE EXCEPT SOLARCITY INC., NOR SHALL IT BE DISCLOSED San Mateo, CA 94402 SC - CA Label Set T:(650)638-1028 F:(650)638-1029 IN WHOLE OR IN PART TO OTHERS OUTSIDE THE RECIPIENT'S ORGANIZATION, 'I' solatti y (888) -SOL -CITY (765-2489) www.solardtyxom EXCEPT IN CONNECTION WITH THE SALE AND USE OF THE RESPECTIVE o SOLARCITY EQUIPMENT, WITHOUT THE WRITTEN PERMISSION OF SOLARCITY INC. SolarCity SleekMountTM - Tile The SolarCity SleekMount hardware solution is optimized to achieve superior strength and aesthetics while minimizing roof disruption and labor. The elimination of visible rail ends and mounting clamps, combined with the addition of array trim and a lower profile all contribute to a more visually appealing system. SleekMount utilizes Zep Compatible TM modules with strengthened frames that attach directly to Zep Solar standoffs, effectively reducing the number of standoffs required, when compared to conventional rail -based systems. 0 B SolarCity, January 2013 • Utilizes Zep Solar hardware and UL 1703 listed Zep CompatibleTM modules • Interlock and grounding devices in system UL listed to UL 2703 • Interlock and Ground Zep ETL listed to UL 1703 as "Grounding and Bonding System" • Ground Zep UL and ETL listed to UL 467 as grounding device • Anodized components for corrosion resistance • Applicable for vent spanning functions Components Cam Foot Spanner Bar 3/8" Machine Screw and Nut Spanner Bar Clamp Tile Hook Lag Screw (2) V�OMPA l�B` ON LISTED OOMPPr SolarCity SleekMountTM - Tile 1 SolarCity. January2013 Installation Instructions Remove tile and locate rafter Drill pilot holes of proper diameter for fastener size per NDS section 1.1.3.2 Seal pilot holes with roofing sealant Place tile hook Install lags pursuant to NDS section 11.1.3 with fender washer Notch underside of tile and reinstall tile Attach Spanner Clamps and tighten firmly in place Insert Cam Foot into Spanner Bar and rotate Cam Nut 100 degrees Place modules ar CUPERTINO . A Building Depatrenp I � }� �JL 2 3 2014 REVIEWED R=JR CODE COMPLIANCE Reviewed By. solar- • • Power Optimizer Module Add -On PV power optimization at the module -level - Up to 25% more energy - Superior efficiency (99.5%) - Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading - Flexible system design for maximum space utilization Solar `■ SolarEdge Power Optimizer Module Add -On for North America P300 / P350 / P400 -r— P300 P350 PI00 (for 60-ceg PV (for 72�e11 PV (for 96 -cell PV modules) modules) modules) INPUT — 350 400 W Rated Input DC PoweOu Absolute Maximum Input Voltage (Voc at lowest temperature) 48 60 8o Vdc MPPT Operating Range 8-48 8-60 8-80 Parallel Strings of Different Lengths or Orientations Vdc Maximum Short Circuit Current (Isc) 10 Ado Maximum DC Input Current 12.5 Ado Maximum Efficiency 99.5 % Weighted Efficiency 98.8 1 % Overvoltage Category II OUTPUT DURING OPERATION (POWER OPTIMIZERCONNECTEDTOOPERATINGINVERTER) _ ..... Maximum Output Current 15 ���� Maximum Output Voltage __ _ 60 Vdc OUTPUT DURING STAN DBY (PO W ER OPTIMIZE_ R DISCONNECTED FROM INVERTER OR INVERTER O_FF) Safety Output Voltage per Power Opdmizer 1 Vdc STANDARD COMPLIANCE _ EMC FCC Part15 Class B, IEC61000-6-2, IEC61000b3 Safety IEC62109-1(class II safety), UL1741 RoHS Yes INSTALLATION SPECIFICATIONS Maximum Allowed System Voltage 1000 Vdc Dimensions (W x L x H) 143 x 212 x 40.5/ 5.55 x 8.34 It 1.59 mm/in Weight (including cables) 950/2.1 gr/tb Input Connector MC4 / Amphenol / Tyco . Output Wire Type / Connector Double Insulated; Amphenol Output Wlre Length 0.95/3.0 I 1.2/3.9 m/ft Operating Temperature Range -40-+85/-40-+185 'C/'F Protection Rating IP65 / NEMA4 Relative Humidity I 0-200 % a� xaha rrc oo...ot m. r..a.k. xwaw. w.ow.sx oowermim�a yx,..n PV SYSTEM DESIGN USING A SOLAREDGE THREE PHASE THREE PHASE INVERTER SINGLE PHASE 209V 480V Minimum String Length (Power Optimizers)8 30 18 Maximum String Length (Power Optimizers) 25 25 50 Maximum Power per String 5250 60M 12750 W Parallel Strings of Different Lengths or Orientations Yes CUPERINO uilding Dep rtmenr 3 2614 REVIEWED FOR COME COMP6ANCE Reviewed By SolarCity Advantage Module The SolarCity Advantage module represents a 60 Cell, ZEP enabled module. The values shown are the most extreme potential values from SolarCity's portfolio of CEC approved and UL or ETL listed modules. Modules will have a minimum 10 year warranty. The module installed will be one of the following: Trina Solar: TSM255PA05.18 Canadian Solar: CS6P-255PX Electrical Parameters at Standard Test Conditions (STC) Power Output Power Output Pmax W 255 Power Output Tolerances OPmax W -0/+5 Module Efficiency nm % 15.85 Maximum Power Voltage Vmp V 30.2 Maximum Power Current Impp I A 1 8.43 Open -circuit voltage Voc V 37.7 Short-circuit current Isc A 9 Values at Standard Test Conditions STC (Air Mass AM1.5, Irradiance 1000W/ml, Cell Temperature 25°C). Electrical Parameters at Nominal Operating Cell Temperature (NOCT) Power Output Pmax W 185 Voltage at Pmax Vmpp V 27.4 Current at Pmax Impp A 6.77 Open -circuit voltage Voc V 34.4 Short-circuit current Isc I A 7.31 NOCT: Irradiance at 800W/ml, Ambient Temperature 20°C, Wind Speed 1M/s. Thermal Characteristics Nominal operating cell temperature NOCT °C 46+/-2 Temperature coefficient of Pmax y %/°C -0.43 Temperature coefficient of Voc PVoc %/°C -0.34 Temperature coefficient of Isc alsc %/°C 0.065 General Characteristics Solar Cells Multicrystaline Frame Aluminum alloy/ anodized black Weight 45.2 lbs (20.5 kg) CUPERTINO Building Department .;JL 2 3 2014 REVIEWED FOR CODE COMPLIANCE Reviewed By: �� �� Mono Multi Solutions TSM-PA05.18 THE TRINAMOUNT MODULE 60 CELL MULTICRYSTALLINE MODULE WITH TRINAMOUNT FRAME 240-26OW POWER OUTPUT RANGE 15.90 MAXIMUM EFFICIENCY 0w-+37 POWER OUTPUT GUARANTEE As a leading global manufacturer of next generation photovoltaic products, we believe close cooperation with our partners is critical to success. With local presence around the globe, Trina is able to provide exceptional service to each customer in each market and supplement our innovative, reliable products with the backing of Trina as a strong, bankable partner. We are committed to building strategic, mutually beneficial collaboration with installers, developers, distributors and other partners as the backbone of our shared success in driving Smart Energy Together. Trina Solar Limited www.trinosolar.com Trinasolar Smart Energy Together Our most versitile product Compatible with all major BOS components and system designs One of the industry's most trusted modules • Over 2 GW sold across all major global markets • Field proven performance TSM-PA05.18 TRINAMOUNT II WITH THE UNIVERSAL MODULE DIMENSIONS OF PV MODULE TSM-PA05.18 E E 0 941 mm IUN'TKN: raueroure +a z.rz �nsrnuin'c nae 3 ;¢13c UNDINGn E A iaoaan nog= A a12mm tau Back View 11 I-V CURVES OF PV MODULE TSM -245 PA05.18 Z Highly reliable due to stringent quality control • Over 30 in-house tests (UV, TC, HF, and many more) • In-house testing goes well beyong certification requirements Certified to withstand challenging environmental ®conditions • 130 km/hr wind load (2400 Pa) • 900 kg snow load per module (5400 Pa) LINEAR PERFORMANCE WARRANTY 10 Year Product Warranty • 25 Year Linear Power Warranty `0100% o tlditional 0 90% Value from Trino Solo linear warranty (� 80% Years 5 10 15 20 25 N is ■ Trina Solar m O 0 0.00 10.00 20.0° 30.m 40.00 Voltage(V) CERTIFICATION ® " O- sA [IM mangy t, PV CYCLE Lulea \7 Trinasolar Smart Energy Together TEMPERATURE RATINGS Nominal Operating Cell 45-C (t2°C) Temperature (NOCT) Temperature Coefficient of P- - 0.43%/•C Temperature Coefficient of Voc - 0.32%/•C Temperature Coefficient of Isc 0.047%/°C i WARRANTY _ �F'"`•^�f ya 10 year Product Workmanship Warr 25 year Linear Power Warranty (Please refer to product warranty for detai MAXIMUM RATINGS Operational Temperature -40-+85•C Maximum System 1000V DC(IEC)/ Voltage 600V DC(UL) Max Series Fuse Rating 15A CIJPERTI 0 Building Depa er Ju VL 2 3 2014 - REVIEWEP FOR CODE COMP PACKAGING CONFIGURATION Modules per box: 24 pieces Revl wed By. Modules per 40' container: 672 pieces CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT. p01APAt,B C, 2013 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change without notice. (� , eaMPP1111 F TSM -240 TSM -245 TSM -250 TSM -255 TSM -260 ELECTRICAL DATA @STC PA05.18 PA05.18 PA05.18 PA05.18 PA05.18 Peak Power Wafts-P.A% [WP) 240 245 250 255 260 Power Output Tolerance -Pr 0/+3 0/+3 0/+3 0/+3 0/+3 Maximum Power Voltage-VMr (V) 29.7 30.2 30.3 30.5 30.7 Maximum Power Current -l- (A) 8.10 8.13 8.27 8.36 8.47 Open Circuit Voltage-Voc (V) 37.3 37.5 37.6 37.7 37.9 Short Circuit Current-Isc (A) 8.62 8.68 8.85 8.92 9.00 Module Efficiency qn, (%) 14.7 15.0 15.3 15.6 15.9 STC: Irradiance 1000 W/m2. Cell Temperature 25°C, Air Mass AMI.S according to EN 60904-3. Average efficiency reduction of 4.5% at 200 W/m2 according to EN 60904-I. TEMPERATURE RATINGS Nominal Operating Cell 45-C (t2°C) Temperature (NOCT) Temperature Coefficient of P- - 0.43%/•C Temperature Coefficient of Voc - 0.32%/•C Temperature Coefficient of Isc 0.047%/°C i WARRANTY _ �F'"`•^�f ya 10 year Product Workmanship Warr 25 year Linear Power Warranty (Please refer to product warranty for detai MAXIMUM RATINGS Operational Temperature -40-+85•C Maximum System 1000V DC(IEC)/ Voltage 600V DC(UL) Max Series Fuse Rating 15A CIJPERTI 0 Building Depa er Ju VL 2 3 2014 - REVIEWEP FOR CODE COMP PACKAGING CONFIGURATION Modules per box: 24 pieces Revl wed By. Modules per 40' container: 672 pieces CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT. p01APAt,B C, 2013 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change without notice. (� , eaMPP1111 F TSM '240 TSM -245 TSM -250 TSM -255 TSM -260 ELECTRICAL DATA @ NOCT PA05.18 PA05.18 PA05.18 PA05.18 PA05.18 Maximum Power -P -x (Wp) 174 178 181 184 188 Maximum Power Voltage-Vrwr (V) 26.6 26.8 27.0 27.2 27.4 Maximum Power Current-Iw,ry (A) 6.55 6.64 6.70 6.77 6.86 Open Circuit Voltage (V)-Voc (V) 34.1 34.2 34.3 34.4 34.6 Short Circuit Current (A)-Isc (A) 7.04 7.10 7.25 7.31 7.37 NOCT: Irradiance at 800 W/m'. Ambient Temperature 20°C. Wind Speed 1 m/s. MECHANICAL DATA Solar cells Multicrystalline 156 x 156 mm (6 inches) Cell orientation 60 cells (6 x 10) Module dimensions 1650 x 992 x 40 mm (64.95 x 39.05 x 1.57 inches) Weight 18.6 kg (41.0 lbs) Glass High transparency solar glass 3.2 mm (0.13 inches) Backsheet White Frame Black Anodized Aluminium Alloy with Trinamount Groove J -Box IP 65 or IP 67 rated Cables Photovoltaic Technology cable 4.0 mm' (0.006 inches'), 1100 mm (43.3 inches) Connector Original MC4 TEMPERATURE RATINGS Nominal Operating Cell 45-C (t2°C) Temperature (NOCT) Temperature Coefficient of P- - 0.43%/•C Temperature Coefficient of Voc - 0.32%/•C Temperature Coefficient of Isc 0.047%/°C i WARRANTY _ �F'"`•^�f ya 10 year Product Workmanship Warr 25 year Linear Power Warranty (Please refer to product warranty for detai MAXIMUM RATINGS Operational Temperature -40-+85•C Maximum System 1000V DC(IEC)/ Voltage 600V DC(UL) Max Series Fuse Rating 15A CIJPERTI 0 Building Depa er Ju VL 2 3 2014 - REVIEWEP FOR CODE COMP PACKAGING CONFIGURATION Modules per box: 24 pieces Revl wed By. Modules per 40' container: 672 pieces CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT. p01APAt,B C, 2013 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change without notice. (� , eaMPP1111 F gCetlt0\$ m Key Features Quick and easy to install - dramatically reduces installation time Lower system costs - can cut rooftop installation costs in half Aesthetic seamless appearance - low profile with auto leveling and alignment • Built-in hyper -bonded grounding system - if it's mounted, it's grounded Theft resistant hardware • Ultra-low parts count - 3 parts for the mounting and grounding system • Industry first comprehensive warranty insurance by AM Best rated leading insurance companies in the world • Industry leading plus only power tolerance: 0 -5W • Backward compatibility with all standard rooftop and ground mounting systems • Backed By Our New 10/25 Linear Power Warranty Plus our added 25 year insurance coverage 100% Ad dad Value From Ware.... 90% 80%7 0% 6 10 1s 20 25 *14 to CanadianSolar 10 year product warranty on materials and workmanship • 25 year linear power output warranty Next Generation Solar Module NewEdge, the next generation module designed for multiple types of mounting systems, offers customers the added value of minimal system costs, aesthetic seamless appearance, auto groundingand theft resistance. The black -framed CS6P-PX is a robust 60 cell solar module incorporating the groundbreaking Zep compatible frame. The specially designed frame allows for rail -free fast installation with the industry's most reliable grounding system. The module uses high efficiency poly -crystalline silicon cells laminated with a white back sheet and framed with black anodized aluminum. The black -framed CS6P-PX is the perfect choice for customers who are looking for a high quality aesthetic module with lowest system cost. Best Quality • 235 quality control points in module production • EL screening to eliminate product defects • Current binning to improve system performance • Accredited Salt mist resistant Best Warranty Insurance • 25 years worldwide coverage • 100% warranty term coverage • Providing third party bankruptcy rights • Non -cancellable • Immediate coverage • Insured by 3 world top insurance companies Comprehensive Certificates • IEC 61215, IEC 61730, 1EC61701 ED2, UL1703, CEC Listed, CE and MCS • IS09001: 2008: Quality Management System • ISO/TSI 6949:2009: The automotive quality management system • IS014001:2004: Standards for Environmental management system • QC080000 HSPM: The Certification for Hazardous Substances Regulations • OHSAS 18001:2007 International standards for occupational health and safety • REACH Compliance O sl► C E O,�., E www.canadlansolar.com CS6P-235/240/245/250/255PX Electrical Data STC CS6P-235P CS6P-240P CS6P-245P CS6P-250PX CS6P-255PX Nominal Maximum Power (Pmax) 235W 24OW 245W 25OW 255W Optimum Operating Voltage (Vmp) 29.8V 29.9V 30.OV 30.1V 30.2V Optimum Operating Current (Imp) 7.90A 8.03A 8.17A 8.30A 8.43A Open Circuit Voltage (Voc) 36.9V 37.0V 37.1V 37.2V 37.4V Short Circuit Current (Isc) 8.46A 8.59A 8.74A 8.87A 9.00A Module Efficiency 14.61% 14.92% 15.23% 15.54% 15.85% Operating Temperature -40'C -+85•C Maximum System Voltage 1000V IEC /600V UL Maximum Series Fuse Rating 15A Application Classification Class A Power Tolerance 0-+5W Under Standard Test Conditions (STC) of irradiance of 1000W/m', spectrum AM 1.5 and cell temperature of 25-C NOCT CS6P-235P CS6P-240P CS6P-245P CS6P-250PX CS6P-255PX Nominal Maximum Power (Pmax) 17OW 174W 178W 181W 185W Optimum Operating Voltage (Vmp) 27.2V 27.3V 27AV 27.5V 27.5V Optimum Operating Current (Imp) 6.27A 6.38A 6.49A 6.60A 6.71A Open Circuit Voltage (VOC) 33.9V 34.OV 34.1 V 34.2V 34AV Short Circuit Current (Isc) 6.86A 6.96A 7.08A 7.19A 7.29A Under Normal Operating Call Temperature, Irradiance of 800 W/m', spectrum AM 1.5, ambient temperature 201C, wind speed 1 m/s MPrhaniral Data Cell Type Poly -crystalline 156 x 156mm, 2 or 3 Busbars Cell Arrangement 60 (6 x 10) Dimensions 1638 x 982 x 40mm (64.5 x 38.7 x 1.57in) Weight 20.5kg (45.2 lbs) Front Cover 3.2mm Tempered glass Frame Material Anodized aluminium alloy J -BOX IP65, 3 diodes Cable 4mm'(IEC)/12AWG(UL), 1000mm Connectors MC4 or MC4 Comparable Standard Packaging (Modules per Pallet) 24pcs Module Pieces per container (40 ft. Container) 672pcs (40'HQ) -V Curves (CS6P-255PX) •i al 71 Pmax -0.43 %rc Voc -0.34 %/•C _ —Bo+uw/m2 t cpaw/m2 3 \y Section A -A 350 _e �s l o 0 3 -3 C 2 -aSC - Sc 'Specifications included in this datasheel are subject to change without prior notice. About Canadian Solar Canadian Solar Inc. Is one of the world's largest solar companies. As a leading vertically -integrated manufacturer of ingots, wafers, cells, solar modules and solar systems, Canadian Solar delivers solar power products of uncompromising quality to worldwide customers. Canadian Solar's world class team of professionals works closely with our customers to provide them with solutions for all their solar needs. EN -Rev 10.17 Copydghl ® 2012 Canadian Solar Inc. Black -framed Temperature Characteristics Temperature Coefficient Pmax -0.43 %rc Voc -0.34 %/•C Isc 0.065 %/•C Normal Operating Cell Temperature 45±2°C Performance at Low Irradiance Industry leading performance at low irradiation environment, +95.5% module efficiency from an irradiance of 1000w/m'to 200w/m= (AM 1.5, 25 -C) Engineering Drawings CUPERTINC Building Deeart-rnenf REVIEWED FOR CODE C,OMF UANOE Canadian Solar was founded In Canada In: 2001tant#CAeIQ11/ successfully listed on NASDAQ Exchange (symbol: CSIQ) In November 2006. Canadian Solar has module manufacturing capacity of 2.05GW and cell manufacturing capacity of 1.3GW. solar SolarEdge Single Phasi For North America SE3000A-US / SE380OA-US / SE5000A SE760OA-US / SE1000OA-US / SE11400 IA �pv e rtes ' 25 1�yeats WattantY d The best choice for SolarEdge enabled systems Integrated arc fault protection (Type 1) for NEC 2011 690.11 compliance Superior efficiency (98%) Small, lightweight and easy to install on provided bracket Built-in module -level monitoring Internet connection through Ethernet or Wireless Outdoor and indoor installation Fixed voltage inverter, DC/AC conversion only Pre -assembled AC/DC Safety Switch for faster installation Optional - revenue grade data, ANSI C12.1 USA -GERMANY -ITALY -FRANCE-JAPAN-CHINA-AUSTRALIA -THE NETHERLANDS -ISRAEL www.solaredge.us so I a r " • • Single Phase Inverters for North America SE3000A-US / SE3800A-US / SE5000A-US / SE6000A-US / Recommended Max. OC Power- 3750 4750 6250 7500 1 9500I 12400 14250 W SE7600A-US / SE10000A-US / SE11400A-US " minimum / 1-2 strings / 24-6 AWG 3/4" minimum / 1-2 strings /14-6 AYV AWG range Dimensions with AC/DC Safety SE3000A-US SE3800A-US SESOOOA-Us SEWWA-Us SE7600A-US SEj 10000ill sE11400A-US I 30.5 x 12.5 x 10.5 / + x 315.x 26 0 t _ _ OUTPUT Yes I 775 x 315 x 191 . Max. Input Voltage Nominal AC Power Output 3000 3800 5000 6000 7600 9980 @ 208V 10000 @24V 11400 VA Max. AC Power Output 3300 4150 5400 @ 208V 6000 8350 10800 @ 208V 12000 VA Vdc Max. Input Current"'" 5450 @240V 10950 @240V 18 23 I 115.5 I AC Output Voltage Min. -Nom. -Max.* Adc _ • For other regional settings please contact SolarEdge support. @ 240V 183 - 208 - 229 Vac high temperature is above 77'F/25'C and to 135% for locations where it Is below 77'F/25'C. For detailed Information, refer to had 11-solaredee Max. Input Short Circuit Current , AC Output Voltage Min. -Nom. -Max.* 45 01 V Reverse -Polarity Protection 211 - 240 - 264 Vac Yes . Ground -Fault Isolation Detection AC Frequency Min: Nom: Max.* 59.3 - 60 - 60.5 (with HI country setting 57 - 60 - 60.5) Hz Max. Continuous Output Current 12.5 I 16 24 @ 208V 25 I 32 r 48 @208V 47.5 A % CEC Weighted Efficiency 21 @ 240V 42 @ 240V 97.5 @ 208V 97.5 97.5 97 @ 208V GFDI % 1 I A Utility Monitoring, Islanding Nighttime Power Consumption Protection, Country Configurable _ < 4 Yes W ADDITIONAL FEATURES Recommended Max. OC Power- 3750 4750 6250 7500 1 9500I 12400 14250 W (STC) " minimum / 1-2 strings / 24-6 AWG 3/4" minimum / 1-2 strings /14-6 AYV AWG range Dimensions with AC/DC Safety 30.5 x 12.5 x 7 / 30.5 x 12.5 x 7.5 / Transformer -less, Ungrounded I 30.5 x 12.5 x 10.5 / + x 315.x 26 0 t Switch (HxWxD) Yes I 775 x 315 x 191 . Max. Input Voltage 51.2 / 23.2 54.7/24.7 500 88.4 / 461 "s .. Cooling Vdc Nom. DC Input Voltage Fans(user replLF ft'bl_ @jtt_� Noise 325 @ 208V / 350 @ 240V < 50 Vdc Max. Input Current"'" 9.5 I 13 18 23 I 115.5 I 34'5 Adc _ • For other regional settings please contact SolarEdge support. @ 240V 30.5 @224 V high temperature is above 77'F/25'C and to 135% for locations where it Is below 77'F/25'C. For detailed Information, refer to had 11-solaredee Max. Input Short Circuit Current ••• A higher current source may be used; the Inverter 30 45 •••• CAN PINS are eligible for the Ontario FIT and mKroFIT Adc Reverse -Polarity Protection Yes . Ground -Fault Isolation Detection 600ka Sensitivity Maximum Inverter Efficiency 97.7 II 98.2 98.3 98.3 98 98 98 % CEC Weighted Efficiency 97.5 98 97.5 @ 208V 97.5 97.5 97 @ 208V 97.5 % I 98 @ 240V 97.5 @ 240V Nighttime Power Consumption < 2.5 _ < 4 W ADDITIONAL FEATURES _ _ Supported Communication Interfaces RS485, RS232, Ethernet, ZigBee (optional) Revenue Grade Data, ANSI C12.1 Optional STANDARD COMPLIANCE Safety UL1741, UL1699B, UL1998 , CSA 22.2 , Grid Connection Standards IEEE1547 Emissions FCC part15 class B INSTALLATION SPECIFICATIONS AC output conduit size / AWG range 3/4" minimum / 24-6 AWG 3/4" minimum /&3 Awr ' / DC input conduit size / # of strings3/4 " minimum / 1-2 strings / 24-6 AWG 3/4" minimum / 1-2 strings /14-6 AYV AWG range Dimensions with AC/DC Safety 30.5 x 12.5 x 7 / 30.5 x 12.5 x 7.5 / I 30.5 x 12.5 x 10.5 / + x 315.x 26 0 t Switch (HxWxD) 775 x 315 x 172 I 775 x 315 x 191 Weight with AC/DC Safety Switch 51.2 / 23.2 54.7/24.7 88.4 / 461 "s .. Cooling Natural Convection _ Fans(user replLF ft'bl_ @jtt_� Noise <25 < 50 Min:Max.Operating Temperature -13 to+140/-25 to +60 (CAN version**** -40 to +60) REVIEWED Range , Protection Rating NEMA 311 _ • For other regional settings please contact SolarEdge support. rte v I ew •• Limited to 125% for locations where the yearly average high temperature is above 77'F/25'C and to 135% for locations where it Is below 77'F/25'C. For detailed Information, refer to had 11-solaredee usMles/Ddfs nyerter do oversizina ••• A higher current source may be used; the Inverter tedaulde.Ddf will limit Its input current to the values sta. •••• CAN PINS are eligible for the Ontario FIT and mKroFIT (mimFrF m. SE11400A-US-CAN). CUPERTINO In/ Building Department MITI 1469 d8A i POR CODE COMPLIANCE ,ed By