HomeMy WebLinkAboutReso 24054-Z-83
RESOLUTION NO. 2405
OF THE PLANNING COMMISSION OF THE CITY OF CUPERTINO
RECOMMENDING APPROVAL OF REZONING APPROXIMATELY 10
GROSS ACRES FROM CITY OF CUPERTINO OP (PLANNED OFFICE)
ZONE TO P (PLANNED DEVELOPMENT) ZONE.
APPLICANT: Design Analysis (Town Center Associates)
ADDRESS: 1659-A West San Carlos Street, San Jose, California 95128
SUBMITTED: May 2, 1983
LOCATION: Southwest quadrant of De Anza Boulevard and Rodrigues Avenue
-------------------------------------------------------------------------------------
FINDINGS AND SUBCONCLUSIONS:
:
Approval is recommended subject to the findings as set forth on Page 1 and
subconclusions as set forth in the minutes of the Planning Commission meeting
of June 13, 1983.
CONDITIONS:
1-14. Standard Conditions to the extent that they do not conflict with the
special conditions enumerated herein. In the event a conflict does
exist, the special conditions enumerated herein shall apply.
15. The approval is based upon Exhibit A of Application 4-Z-83 and Exhibit A
of Application 11-U-83 as may be modified by additional conditions contained
herein.
16. The development on the property shall not exceed a floor area ratio of .33
for the entire 10 acre site. Uses may include general office, corporate
administrative .office, proto-type research as defined below, and incidential
and related commercial usesas approved by the Director of Planning and
Development.
Proto-type research and development activities may be conducted in
conjunction with the above mentioned office activites subject to the
definition and guidelines listed below:
floc;,,;,-4—
Proto-type R & D refers to research and development activities which
lead to the development of a new product or a new manufacturing and
assembly process. Products which are developed, manufactured and/or
assembled as a part of a proto-type facility are not intended to be
mass produced for sale.
Guidelines for Proto-type Research and Development
1. Control of hazardous materials: The type, use and storage of hazardous
materials for proto-type research and development or assembly is
regulated by the Uniform Building Code, the Uniform Fire Code and
any new ordinance or other regulation which controls hazardous materials.
- 2 -
wmnhission Resolution No. 2405 4-Z-83
2. Control of physical appearance: There shall be no outward
appearance that a proto-type research and development or assembly
process is in place. There will be no exterior storage, and receiving
facilities shall be limited in scale. Generally, no more than 25%
of the total space occupied by the firm will be devoted to a
proto-type research and development or assembly activity.
The Director of Planning and Development shall review each request
for proto-type research and development or assembly activities. The
Director will review each application based upon the general guidelines
above and may approve, disapprove or modify the submitted plans.
The Director's decision may be appealed to the City Council as provided
in the City of Cupertino's Procedural Ordinance.
--------------------------------------------------------------------------------------
PASSED AND ADOPTED this 13th day of June, 1983, at a regular meeting of the
Planning Commission of the City of Cupertino, State of California, by the
following roll call vote:
AYES: Commissioners Blaine, Claudy, Chairman Adams
NAYS: None
ABSTAIN: None
ASENT: Commissioner Koenitzer
APPROVED:
/s/ Victor J. Adams
Victor J. Adams, Chairman
Planning Commission
ATTEST:
/s/ Robert Cowan
Robert Cowan
Assistant Planning Director
- 3 -