The URL can be used to link to this page

15100119CITY OF CUPERTINO BUILDING PERMIT BUILDING ADDRESS: CONTRACTOR: PERMIT NO: 15100119 20682 HOMESTEAD RD (326 10 066)120682 HOMESTEAD RD (326 10 066) KITAMI SAN CARLOS, CA 94070 OWNER'S NAME: SOBRATO INTERESTS 1 ETAL DATE ISSUED: 01/12/2016 OWNER'S PHONE: (408) 446-0700 PHONE NO: (650) 591-7651 LICENSED CONTRACTOR'S DECLARATION BUILDING PERMIT INFO: License Class @ Lic. #503600 Contractor KITAM1 Date 01/31/2017 — BLDG _ELECT —PLUMB MECH RESIDENTIAL COMMERCIAL I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing — — — with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. JOB DESCRIPTION: YAYOI - T.I. TO COMBINE STE 20682 & STE 20684 TO I hereby affirm under penalty of perjury one of the following two declarations: CREATE (N) RESTAURANT (2,663 S.F.) 1. I have and will maintain a certificate of consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the REV# 1 - Change kitchen equipment and dining layout. Change lighting performance of the work for which this permit is issued. fixture plan. Adding wal$-in cooler. No change in mechanical plan. 2. I have and will maintain Worker's Compensation Insurance, as provided for by / Section 3700 of the Labor Code, for the performance of the work for which this Sq. Ft Floor Area: Valuation: $185000.00 permit is issued. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances APN Number: Occupancy Type: and state laws relating to building construction, and hereby authorize 326 10 066 representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which PERMIT EXPIRES IF WORK IS NOT STARTED may accrue against said City in consequence of the granting of this permit. WITHIN 180 DAYS OF PERMIT ISSUANCE OR Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. 180 DAYS FROM LAST CALLED INSPECTION. Signature Date 10/03/2016 Issued by: Susan Winslow .�� 1193/ " OWNER -B 1fr.D DECLARATION Date: 01/12/2016 . .R I hereby affirm that I am exempt from the Contractor's License Law for one of the RF ROOFS: following two reasons: All roofs shall be inspected prior to any roofing material being installed. If a roof is 1. I, as owner of the property, or my employees with wages as their sole installed without first obtaining an inspection, I agree to remove all new materials for compensation, will do the work, and the structure is not intended or offered for inspection. sale (Sec.7044, Business & Professions Code) 2. I, as owner of the property, am exclusively contracting with licensed Signature of Applicant: contractors to construct the project (Sec.7044, Business & Professions Code). Date: 10/03/2016 I hereby affirm under penalty of perjury one of the following three declarations: ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER 1. I have and will maintain a Certificate of Consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. HAZARDOUS MATERIALS DISCLOSURE 2. I have and will maintain Worker's Compensation Insurance, as provided for by I have read the hazardous materials requirements under Chapter 6.95 of the Section 3700 of the Labor Code, for the performance of the work for which this California Health & Safety Code, Sections 25505, 25533, and 25534. I will permit is issued. maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the 3. I certify that in the performance of the work for which this permit is issued, I Health & Safety Code, Section 25532(a) should I store or handle hazardous shall not employ any person in any manner so as to become subject to the material. Additionally, should I use equipment or devices which emit hazardous air contaminants as defined by the Bay Area Air Quality Management District I Worker's Compensation laws of California. If, after making this certificate of will malntain compliance with the Cupertino Municipal Code, Chapter 9.12 and exemption, I become subject to the Worker's Compensation provisions of the the Health & Safety Code, Sections 25505, 25533, and 25534. Labor Code, I must forthwith comply with such provisions or this permit shall be deemed revoked. Owner or authorized agent: 4. APPLICANT CERTIFICATION Date: 10/03/2016 1 certify that I have read this application and state that the above information is CONSTRUCTION LENDING AGENCY correct. I agree to comply with all city and county ordinances and state laws I hereby affirm that there is a construction lending agency for the performance relating to building construction, and hereby authorize representatives of this city of work's for which this permit is issued (Sec. 3097, Civ C.) to enter upon the above mentioned property for inspection purposes. (We) agree Lender's Name to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in Lender's Address consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal ARCHITECT'S DECLARATION Code, Section 9.18. 1 understand my plans shall be used as public records. Signature Date 10/03/2016 Licensed Professional CITY OF CUPERTINO BUILDING PERMIT BUILDING ADDRESS: 20682 HOMESTEAD RD CUPERTINO CA 95014 (326 10 066) CONTRACTOR: ( KITAMI ) SAN CARLOS, CA 94070 PERMIT NO: 15100119 OWNER'S NAME: SOBRATO INTERESTS 1 ETAL DATE ISSUED: OWNER'S PHONE: PHONE NO: LICENSED CONTRACTOR'S DECLARATION License Class Lic. # Contractor ( KITAMI ) Date I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. I hereby affirm under penalty of perjury one of the following two declarations: 1.I have and will maintain a certificate of consent to self-insure for Worker’s Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2.I have and will maintain Worker’s Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non-point source regulations per the Cupertino Municipal Code, Section 9.18. Signature___________________________________ Date OWNER - BUILDER DECLARATION I hereby affirm that I am exempt from the Contractor’s License Law for one of the following two reasons: 1.I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec.7044, Business & Professions Code) 2.I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.7044, Business & Professions Code). I hereby affirm under penalty of perjury one of the following three declarations: 1.I have and will maintain a Certificate of Consent to self-insure for Worker’s Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2.I have and will maintain Worker’s Compensation Insurance, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 3.I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Worker’s Compensation laws of California. If, after making this certificate of exemption, I become subject to the Worker’s Compensation provisions of the Labor Code, I must forthwith comply with such provisions or this permit shall be deemed revoked. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non-point source regulations per the Cupertino Municipal Code, Section 9.18. Signature___________________________________ Date BUILDING PERMIT INFO: BLDG ELECT PLUMB MECH RESIDENTIAL COMMERCIAL JOB DESCRIPTION: YAYOI - T.I. TO COMBINE STE 20682 & STE 20684 TO CREATE (N) RESTAURANT (2,663 S.F.) Sq. Ft Floor Area: Valuation: $185000.00 APN Number: 326 10 066 Occupancy Type: PERMIT EXPIRES IF WORK IS NOT STARTED WITHIN 180 DAYS OF PERMIT ISSUANCE OR 180 DAYS FROM LAST CALLED INSPECTION. Issued by: -1 Date: RE-ROOFS: All roofs shall be inspected prior to any roofing material being installed. If a roof is installed without first obtaining an inspection, I agree to remove all new materials for inspection. Signature of Applicant:_______________________________ Date: ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER HAZARDOUS MATERIALS DISCLOSURE I have read the hazardous materials requirements under Chapter 6.95 of the California Health & Safety Code, Sections 25505, 25533, and 25534. I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Section 25532(a) should I store or handle hazardous material. Additionally, should I use equipment or devices which emit hazardous air contaminants as defined by the Bay Area Air Quality Management District I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Sections 25505, 25533, and 25534. Owner or authorized agent: ________________________________ Date: CONSTRUCTION LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of work's for which this permit is issued (Sec. 3097, Civ C.) Lender's Name Lender's Address ARCHITECT’S DECLARATION I understand my plans shall be used as public records. Licensed Professional________________________________________________ CUPERTINO CONSTRUCTION PERMIT APPLICATION COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION 10300 TORRE AVENUE • CUPERTINO, CA 95014-3255 (408) 777-3228 • FAX (408) 777-3333 • building(d)cupertino.org P�v 11 1 /G10011 q ❑ NEW CONSTRUCTION ❑ ADDITION ❑ ALTERATION/TI x❑ REVISION/ DEFERRED ORIGINAL PERMIT # PROJECT ADDRESS 20682 & 20684 Homestead Rd. Cupertino APN # LP I ou S. ,i -/ PHONE 415 231 9565 E-MAIL OWNER NAME Y Ui-u `4 STREET ADDRESS 1900 S Norfolk St. CITY, STATE, ZIP San Mateo FAX CONTACT NAME Chiaki Koyama PHONE 650 591 7651 E-MAIL c.koyama@d-kitami.com STREET ADDRESS 929 Washington St. CITY, STATE. ZIP San Carlos FAX ❑ OWNER ❑ OWNER -BUILDER ❑ OWNER AGENT 13 CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT CONTRACTOR NAME Yasuo Ito LICENSE NUMBER .5503600 LICENSE TYPE B BUS. LIC # COMPANY NAME Kltaml Inc. E-MAIL c.koyama@d-kitami.com FAX STREET ADDRESS 929 Washington St. CITY, STATE, ZIP San Carlos PHONE 650 591 7651 ARCHITECT/ENGINEER NAME Hiroshi Sakamoto LICENSE NUMBER 33824 BUS. LIC # COMPANY NAME Kltaml Inc. E-MAIL c.koyama@d-kitami.com FAX STREET ADDRESS 929 Washington St. CITY, STATE, ZIP San Carlos PHONE 650 591 7651 DESCRIPTION OF WORK Change Kitchen equipment and dining layout. Change lighting fixture plan. Adding Walkin Cooler. No change on mechanical Plan. EXISTING USE PROPOSED USE CONSTR. TYPE #STORIES Restaurnat V -B 1 USE TYPE OCC. SQ.FT. VALUATION (3) EXISTG NEW FLOOR DEMO TOTAL AREA 2663 AREA AREA NETAREA 2663 restaurnat V -B A-2 2663 BATHROOM KITCHEN OTHER REMODEL AREA REMODELAREA REMODELAREA PORCH AREADECK AREA TOTAL DECKTORCH AREA GARAGE AREA: DETACH []ATTACH # DWELLING UNITS: ISA SECOND UNIT © YES SECOND STORY ❑ YES BEINC ADDED? NO ADDITION? QNO PRE -APPLICATION ❑ YES IF YES. PROVIDE COPY OF IS THE BLDC AN ❑ YES RECEIVED BY: / TOTAL VALUATION: PLANNING APPL # []NO PLANNING APPROVAL LETTER EICHLER HOME? 0 NO f By my signature below, I certify to each of the following: I am the property owner or authorized agent to act on the property owner's behalf. I have read this application and the information 1 have provided is correct. 1 have read the Description of Work and verify it is accurate. I agree to comply with all applicable local ordinances and state laws relating to building construction. I authorize representatives of Cupertino to enter the above-iidentt'iified pr pertly for inspection purposes. Signature Applicant/Agent: Date: �% 6 of / SUPPLEMENTAL INFORMATION REQUIRED PLAN CHECK TYPE ROUTING SLIP ❑ OVER-THE-COUNTER BUILDING PLAN REVIEW New SFD or Multifamily dwellings: Apply for demolition permit for existing building(s). Demolition permit is required prior to issuance of building permit for new building. ❑ ExPRESS PLANNING PLAN REVIEW Commercial Bldgs: Provide a completed Hazardous Materials Disclosure ❑, STANDARDUBLIC WORKS form if any Hazardous Materials are being used as part of this project. © ��^yy_� � LARGE S�+�IRE DEPT" Copy of Planning Approval Letter or Meeting with Planning prior to ❑ MAJORrr sANITARXSEwERDISTRIc�I' submittal of Building Permit application. y� ENVIRONMENTAL HEALTH BldgApp 2011.doc revised 06/21/11 CITY OF CUPERTINO BUILDING PERMIT BUILDING ADDRESS: CONTRACTOR: PERMIT NO: 15100119 20682 HOMESTEAD RD CUPERTINO CA 95014 (326 10 066) (KITAMI ) SAN CARLOS, CA 94070 --- ............. — ___ .......... ____ OWNER'S NAME: SOBRATO INTERESTS I ETAL ------- ----- ____ _....... -- —_........ __._ .._.__-------.. DATE ISSUED: ww OWNER'S PHONE: PHONE NO: - ---........ LICENSED CONTRACTOR'S DECLARATION BUILDING PERMIT INFO: License Class Lic. # 6 5.0360D Contractor ( KITAMI ) Date — BLDG —ELECT —PLUMB MECH RESIDENTIAL COMMERCIAL I hereby affirm that I am licensed under the provisions of Chapter 9 (commencing — — — with Section 7000) of Division 3 of the Business & Professions Code and that my license is in full force and effect. JOB DESCRIPTION: YAYOI - T.I. TO COMBINE STE 20682 & STE 20684 TO I hereby affirm under penalty of perjury one of the following two declarations: CREATE (N) RESTAURANT (2,663 S.F.) t. I have and will maintain a certificate of consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. 2. I have and will maintain Worker's Compensation Insurance, as provided for KW\ by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. Sq. Ft Floor Area. Valuation: $185000.00 APPLICANT CERTIFICATION certify that I have read this application and state that the above . ----- information is correct. I agree to comply with all city and county APN Number: Occupancy Type: ordinances and state laws relating to building construction, and hereby 326 10 066 _.._..... -._.. ._.._....... authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and PERMIT EXPIRES IF WORK IS NOT STARTED expenses which may accrue against said City in consequence of the WITHIN 180 DAMOF PERMIT ISSUANCE OR granting of this permit, Additionally, the applicant understands and willcomply with all non -point source regulations per the Cupertino Municipal 180 Y S PECTION. Code, Section 9.18. �'�� Signature /' t�"� Date Date: OWN ER -B MDER D .. •ARATION I hereby affirm that I am exempt from the Contractor's License Law for one of the RF.. -ROOFS: All roofs shall be inspected prior to any roofing material being installed. If a roof is following two reasons: installed without first obtaining an inspection, I agree to remove all new materials for t. I, as owner of the property, or my employees with wages as their sole inspection. compensation, will do the work, and the structure is not intended or offered for sale (See.7044, Business & Professions Code) Signature of Applicant: 2. I, as owner of the property, am exclusively contracting with licensed Date: contractors to construct the project (Sec.7044, Business & Professions Code). I hereby affirm under penalty of perjury one of the following three declarations: ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER t. I have and will maintain a Certificate of Consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the HAZARDOUS MATERIALS DISCLOSURE performance of the work for which this permit is issued. I have read the hazardous materials requirements under Chapter 6.95 of the 2. I have and will maintain Worker's Compensation Insurance, as provided for California Health & Safety Code, Sections 25505, 25533, and 25534. I will by Section 3700 of the Labor Code, for the performance of the work for which maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the this permit is issued. Health & Safety Code, Section 25532(a) should I store or handle hazardous 3. I certify that in the performance of the work for which this permit is issued, I material. Additionally, should I use equipment or devices which emit hazardous shall not employ any person in any manner so as to become subject to the air contaminants as defined by the Bay Area Air Quality Management District I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and Worker's Compensation laws of California. If, after making this certificate of the Health & Safety Code, Sections 25505, 25533, and 25534. exemption, I become subject to the Worker's Compensation provisions of the Labor Code, I must forthwith comply with such provisions or this permit sbalI Owner or authorized agent: be deemed revoked. Date: 12 12 01'Z APPLICANT CERTIFICATION CONSIRLIC110N LENDING AGENCY I certify that I have read this application and state that the above information is I hereby affirm that there is a construction lending agency for the performance correct. I agree to comply with all city and county ordinances and state laws of work's for which this permit is issued (Sec. 3097, Civ C.) relating to building construction, and hereby authorize representatives of this city Lender's Name to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, Lender's Address judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant ARCHITECT'S DECLARATION understands and will comply with all non -point source regulations per the I understand my plans shall be used as public records. Cupertino Municipal Code, Section 9.18. Licensed Signature Date Professional WON CITY OF CUPERTINO FEE ESTIMATOR - BUILDING DIVISION OCCUPANCY TYPE: ADDRESS: 20682 HOMESTEAD RD DATE: 10/15/2015 REVIEWED BY: MELISSA PC FEE ID APN: 36110066.20682 BP#: *VALUATION: 1$185,000 PERMIT TYPE: Building Permit PLAN CHECK TYPE: Tenant Improvement PRIMARY Commercial Building USE: 7 PENTAMATION 1A TI PERMIT TYPE: 14 WORK YAYOI - T.I. TO COMBINE STE 20682 & STE 20684 TO CREATE N RESTAURANT (2,663 S.F. SCOPE OCCUPANCY TYPE: TYPE OF CONSTR. FLR AREA s1 PC FEES PC FEE ID BP FEES BP FEE ID A (Tenant Improvements) II-B,III-B,IV,V-B 2,663 $2,531.18 IATIPLNCK $1,516.14 /ATHNSP $0.00 PME Plan Check: $0.00 Permit Fee: $1,516.14 Suppl. Insp. Fee:Q Reg. © OT 0.0 hrs $0.00 PME Unit Fee: $0.00 PME Permit Fee: $0.00 TOTALS: 2,663 $2,531.18 $1,516.14 MECH, HOURLY 0 Yes 'Q No PLUMB, HOURLY' Q Yes Q No EIEC, HOURLY 0 Yes Q No NOTE: This estimate does not include fees due to other Departments (Le. Planning, Public Works, Fire, Sanitary Sewer District, School District. etc.). These fees are haled an the nreliminary information available and are only an estimate. Contact the Dent for addn'l info. FEE ITEMS (Fee Resolution 11-053 EI: 7/ /1/131 FEE QTY/FEE MISC ITEMS Plan Check Fee: $2,531.18 Select a Misc Bldg/Structure or Element of a Building 19 Suppl. PC Fee: (F) Reg. © OT 0.0 1 hrs $0.00 PME Plan Check: $0.00 Permit Fee: $1,516.14 Suppl. Insp. Fee:Q Reg. © OT 0.0 hrs $0.00 PME Unit Fee: $0.00 PME Permit Fee: $0.00 „ ,rr E) Work Without Permit? © Yes (j) No $0.00 Advanced Planning Fee: $0.00 Select a Non -Residential Building or Structure 0 i I air l'rx trl� snrF�r 1, f��7 Strong Motion Fee: IBSEISMICO $51.80 Select an Administrative Item Bldtr Stds Commission Fee: IBCBSC $8.00 SUBTOTALS: $4,107.12 $0.00 TOTAL FEE:. $4,107.12 Revised: 10/01/2015 Signature Date Please check applicable subcontractors and complete the following of ation SUBCONTRACTOR BUSINESS LICENSEp Cement, Finisshing, Electrical Excavation Fencing Flooring/ Carpeting Linoleum / Wood Mass I Glazing Heating Insulation Landscaping Catrin Masonry Painting 1 Wallpaper Pavia Plastering Plumbing Roofing Septic Tank Sleet Metal Sheet Rock Tile Cie• r Contractor Signature Date _ �� CONSTRUCTION PERMIT APPLICATION COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION 10300 TORRE AVENUE • CUPERTINO, CA 95014-3255 ' I (408) 777-3228 • FAX (408) 777-3333 • building(cDcupertino.org CUPERTINO ❑ NEW CONSTRUCTION ❑ ADDITION © ALTERATION / TI ❑ REVISION/ DEFERRED ORIGINAL PERMIT # PROJECT ADDRESS 20682 & 20684 Homestead Rd. APN# 326-10-066 OWNER NAME The SOBATO Organization PHONE (408) 446-0700 E-MAM STREET ADDRESS 10600 N De Anza Blvd. #200 CITY, STATE, Cupertino, CA 95014 FAX (409) 446-0583 CONTACT NAME Koichi Matono PHONE (650) 591-7651 E-MAIL k.matono@d-kitami.com STREET ADDRESS 929 Washington St. CITY, STATE, ZIP San Carlos, CA 94070 FAX (650) 591-3316 ❑ OWNER ❑ OWNER -BUILDER ❑ OWNERAGENT LSI CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGBNEER ❑ DEVELOPER ❑ TENANT CONTRACTOR NAME Yasuo Ito LICENSE NUMBER 503600 LICENSE TYPE B BUS. LIC# COMPANYNAME KITAMI Inc. EmAL k.matono@d-kitami.com FAX (650) 591-3316 STREETAD°RESS929 Washington St. CITY, STATE, ZIP San Carlos, CA 94070 PHONE (650) 591-7651 ARCHITECTIENGINEER NAME Hiroshi V Sakamoto LICENSE NUMBER 33824 BUS. LIC# COMPANY NAME KITAMI Inc. E-MAII, k.matono@d-kitami.com FAX (650) 591-3316 STREETAD°RESS 929 Washington St. CITY, STATE, ZIP San Carlos, CA 94070 PHONE (650) 591-7651 DESCRIPTION OF WORK Interior tenant improvement for restaurant including ADA restrooms, commercial kitchen and dining area EXISTING USE PROPOSED USE CONSTR. TYPE # STORIES Restaurant V -B 1 USE TYPE OCC. SQ.F'I-. VALUATION (S) EXLSTG AREA 2663 NEW FLOOR AREA 1 DEMO AREA TOTAL 11 -ARF -2663 Restautant V -B A-2 2663 $185,000 BATHROOM REMODEL AREA 188 KITCHEN REMODELAREA 686 OTHER REMODELAREA 1789 PORCH AREA DECK AREA TOTALDECK/PORCHAREA GARAGEAREA: TJDETACH ATTACH I M DWELLING UNITS: IS A SECOND UNIT El YES SECOND STORY LJYES BEINGADDED? 54NO ADDITION? IRNO PRE -APPLICATION []YES IF YES, PROVIDE COPY OF ISTHEBLDGAN ❑YES UAT10N: PLANNING ADPL # []NO PLANNING APPROVAL LETTER EICHLER HOME? IR NO "�: S a U By my signature below, I certify to each of the following: I am the property ner or authorized ag on the pr ow s behalf. I have read this application and the information III vided is correct. I have read the es ption of Work and verify it is rate. a to comply with al I applicable local ordinances and state laws relatin u' i construc ' thorize re res tatives of Cupertino to enter e -Identified property for inspection purposes. Signature ofApplicant/Age is _ Date: } -] - SUPPLEMENTA,TL INFORMAT109REQUIRED PLAN CHECK TYPE - ROUTWGSLID p ovER-Tut coUNTER ❑ �IUH nIxGPIArt>R�vI>�w _ New SFD or Multifamily dwellings: Apply for demolition permit for existing building(s). Demolition permit is required prior to issuance of building permit for new building. ❑ AVRESS ❑ PLANNING PLAN REVIEW _ Commercial Bldgs: Provide a completed Hazardous Materials Disclosure STANDARD r-1PUBLICWORKS form if any Hazardous Materials are being used as part of this project. © LARGE ❑ FIRE DEPT _ Copy of Planning Approval Letter or Meeting with Planning prior to ❑ MAJOR El SANITARY submittal of Building Permit application. ❑ ENVIRONMENTAL HEALTH BldgApp_2011.doc revised 06/21/11 CALGREEN NON-RESIDENTIAL CHECKLIST — MANDATORY ITEMS COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION CUPERTINO ALBERT SALVADOR, P.E., C.B.O., BUILDING OFFICIAL''. 10300 TORRE AVENUE • CUPERTINO. CA 95014-3255 (408) 777-3228 • FAX (408) 777-3333 • building(a.cupertino.org PURPOSE:" The non-residential provisions of the 2013 CalGreen Code outline planning, design and developmd`nt° nethods that include environmentally responsible site selection, building design, building siting and development to protect, restore and enhance the environmental quality of the site and respect the integrity of adjacent properties; establishes the means of conserving water used indoors, outdoors and in wastewater conveyance; outlines means of achieving material conservation and resource efficiency; and outlines means of reducing the quantity of air contaminants. OFFIr.F r..na% Project Name: YAYOI Project Address: 20682 & 20684 Homestead Road, Cupertino, CA 95014 Project Description: Interior tenant improvement for restaurant Instructions: 1. The Owner or the Owner's agent shall employ a licensed professional experienced with the 2013 California Green Building Standards Codes to verify and assure that all required work described herein is properly planned and implemented in the project. 2. The licensed professional, in collaboration with the owner and the design professional shall initial Column 2 of this checklist, sign and date Section 1 - Design Verification at the end of this checklist and have the checklist printed on the approved plans for the project. 3. Prior to final inspection by the Building Department, the licensed professional shall complete Column 3 and sign and date Section 2 - Implementation Verification at the end of this checklist and submit the completed form to the Building Inspector. MANDATORY FEATURE OR MEASURE The project meets all the requirements of Divisions 5.101 through 5.508. 5.106.1 Storm water pollution prevention. For projects of one acre or less, develop a Storm Water Pollution Prevention Plan (SWPPP) that has been designed, specific to its site, conforming to the State Storm water NPDES Construction Permit or local ordinance, whichever is stricter, as is required for projects over one acre. The plan should cover prevention of soil loss by storm water run-off and/or wind erosion, of sedimentation and/or of dust/particulate matter air pollution. Column 2 Project ,quirements ❑X Column 3 Verification 10 Page l of 9 CalGreen Non -Res Checklisi.doc revised 0//23//4 5.106.4 Bicycle parking. Comply with Sections 5.106.4.1 and 5.106.4.2; or meet local ordinance, whichever is stricter. ❑ ❑ 5.106.4.1.1 Short -Term bicycle parking. If the qualified project is anticipated to generate visitor traffic, provide permanently anchored bicycle racks within 200 feet of the visitors' entrance, readily visible to passers-by, ❑ ❑ for 5 percent of visitor motorized vehicle parking spaces being added, with a minimum of one two -bike capacity rack. 5.106.4.1.2 Long -Term bicycle parking. For qualified buildings with over ❑ ❑ 10 tenant -occupants, provide secure bicycle parking for 5 percent of tenant vehicle parking spaces being added, with a minimum of one space. 5.106.5.2 Designated parking. Provide designated parking for any combination of low -emitting, fuel-efficient and carpool/van pool vehicles as ❑ ❑ shown in Table 5.106.5.2. 5.106.8 Light pollution reduction. Outdoor lighting systems shall be ❑ ❑ designed and installed to comply with the following: 1. The minimum requirements in the California Energy Code for lighting zones ❑ ❑ 1 — 4 as defined in Chapter 10 of the California Administrative Code; and 2. Backlight, Uplight and Glare (BUG) ratings as defined in IES TM -15-11; and ❑ ❑ 3. Allowable BUG rating not exceeding those shown in Table 5.106.8, or ❑ ❑ Comply with a local ordinance lawfully enacted pursuant to Section 101.7, whichever is more stringent. 5.106.10 Grading and paving. The site shall be planned and developed to keep surface water away from buildings. Construction plans shall indicate how ❑ ❑ site grading or a drainage system will manage all surface water flows. Division Perfo rW301ce Requirements 5.201.1 Scope. The California Energy Commission will continue to adopt ❑ ❑ mandatory building standards. -;ion 5.3 WATER EFFICIENCY AND CONSERVATION 77 ,777777w ,i Indoor AOir Use SIS r 5.303.1 Meters. Separate meters shall be installed for the uses described in Sections 503.1.1 and 503.1.2. 5.303.1.1 New building or additions in excess of 50,000 square feet. ❑ ❑ Separate submeters shall be installed as follows: 1. For each individual leased, rented or other tenant space within the ❑ ❑ building projected to consume more than 100 gal/day. 2. Where separate submeters are unfeasible, for water supplied to the following systems: a. Makeup water for cooling towers where flow through is greater ❑ El 500 gpm. b. Makeup water for evaporative coolers greater than 6 gpm. c. Steam and hot-water boilers with energy input > 500,000 Btu/h. Page 2 of 9 Cn(Green Non -Res Check(ist.doc revised 01/23/14 5:303.1.2 Excess consumption. A separate submeter shall be provided for any tenant within a new building or within an addition that is projected ❑ ❑ to consume > 1,000 gal/day. 5.303.2 Water reduction. Plumbing fixtures shall meet the maximum flow rate values shown in Table 5.303.2.3. ❑%� ❑ Exception: Building that demonstrate 20 -percent overall water use reduction. 5.303.2.1 Areas of addition or alteration. For those occupancies within the authority of the California Building Standards Commission, as specified in Section 103, the provisions of Section 5.303.2 and Section 5.303.3 shall ❑ ❑ apply to new fixtures in additions or areas of alterations to the buildings. 5.303.4 Wastewater reduction. Each building shall reduce by 20 percent wastewater by one of the following methods: 1. The installation of water -conserving fixtures or ❑ ❑ 2. Utilizing non -potable water systems. ❑ ❑ 5.303.6 Standards for plumbing fixtures and fittings. Plumbing fixtures and fittings shall be installed in accordance with the California Plumbing Code ❑ ❑ (CPC), and shall meet the applicable standards referenced in CPC Table 1401.1 and CalGreen Chapter 6. Chu#d r r t "U", . , / �/ 5.304.1 Water budget. A water budget shall be developed for landscape ❑ ❑ irrigation use. 5.304.2 Outdoor potable water use. For new water service or for addition or alteration requiring upgraded water service for landscaped areas of at least ❑ ❑ 1,000 sq.ft. but not more than 5,000 sq.ft., separate submeters or metering devices shall be installed for outdoor potable water use. 5.304.3 Irrigation design. In new nonresidential construction or building addition or alteration with at least 1,000 but not more than 2,500 sq.ft. of cumulative landscaped area, install irrigation controllers and sensors which include the following criteria, and meet manufacturer's recommendations. ❑ ❑ 5.304.3.1 Irrigation controllers. Automatic irrigation system controllers installed at the time of final inspection shall comply with the following: 1. Controllers shall be weather- or soil moisture -based controllers that automatically adjust irrigation in response to changes in plants' needs as ❑ ❑ weather conditions change. 2. Weather -based controllers without integral rain sensors or communication systems that account for local rainfall shall have a separate wired or wireless rain sensor which connects or communicates ❑ ❑ with the controller(s). Soil moisture -based controllers are not required to have rain sensor input. / A / 5.407.1 Weather protection. Provide a weather -resistant exterior wall and foundation envelope as required by California Building Code Section 1403.2 ❑ ❑ and California Energy Code Section 150, manufacturer's installation instructions or local ordinance, whichever is more stringent.' Page 3 of 9 CalGreen Non -Res Checklisl.doc revised 01123114 5.407.2 Moisture control. Employ moisture control measures by the following methods; 5.407.2.1 Sprinklers. Prevent irrigation spray on structures. ❑ ❑ 5.407.2.2 Entries and openings. Design exterior entries and/or openings ❑ ❑ to prevent water intrusion into buildings. 5.407.2.2.1 Exterior door protection. Primary exterior entries shall be covered to prevent water intrusion by using nonabsorbent floor and ❑ ❑ wall finishes within at least 2 ft around and perpendicular to such openings plus at least one of the following: 1. An installed awning at least 4 ft in depth. 2. The door is protected by a roof overhang at least 4 ft in depth. 3. The door is recessed at least 4 ft. 4. Other methods which provide equivalent protection. 5.407.2.2.2 Flashing. Install flashings integrated with a drainage El El//�� plane. �/ p 1d i1.�4r�C�ot1 WaS3tE:' ef'�UC�O,�'13,�SQS�±�� R�cyclrig.. , R 5.408.1 Construction waste management. Recycle and/or salvage for reuse a minimum of 50 percent of the nonhazardous construction and demolition waste in accordance with Section 5.408.1.1, 5.408.1.2, or 5.408.1.3; or meet a ❑ ❑ local construction and demolition waste management ordinance, whichever is more stringent. 5.408.1.1 Construction waste management plan. Submit plan per this ❑ ❑ section to enforcement authority. 5.408.1.2 Waste management company. Utilize a waste management company that can provide verifiable documentation that the percentage of ❑ ❑ construction and demolition waste material diverted from the landfill complies with CalGreen Section 5.408. 5.408.1.3 Waste stream reduction alternative. The combined weight of new construction disposal that does not exceed two pounds per square ❑ ❑ foot of building area may be deemed to meet the 50 percent minimum requirement as approved by the enforcing agency. 5.408.1.4 Documentation. Provide documentation of the waste ❑ ❑ management plan that meets the requirements listed in Section 5.408.1.1 through 5.408.1.3. 5.408.3 Excavated soil and land clearing debris. 100 percent of trees, stumps, rocks and associated vegetation and soils resulting primarily from land ❑ ❑ clearing shall be reused or recycled. BUI�t��t1�Iit4f�t1GE till ; 5.410.1 Recycling by occupants. Provide readily accessible areas that serve the entire building and are identified for the depositing, storage and collection ® ❑ of nonhazardous materials for recycling. 5.410.2 Commissioning. For new buildings 10,000 square feet and over, building commissioning for all building systems covered by T24, Part 6, process systems and renewable energy systems shall be included in the ❑ ❑ design and construction processes of the building project. Commissioning requirements shall include items listed in Section 5.410.2. Page 4 of 9 CalGreen Non -Res Checklisi.doc revised 0//23//4 5.410.2.1 Owner's Project Requirements (OPR). Documented before the design phase of the project begins the OPR shall include items listed in ❑ ❑ Section 5.410.4. 5.410.2.2 Basis of Design (BOD). A written explanation of how the design of the building systems meets the OPR shall be completed at the design phase of the building project and updated periodically to cover the systems ❑ ❑ listed in Section 5.410.2.2. 5.410.2.3 Commissioning plan. A commissioning plan describing how the project will be commissioned shall be started during the design phase of ❑ ❑ the building project and shall include items listed in Section 5.410.2.3. 5.410.2.4 Functional performance testing. Functional performance testing shall demonstrate the correct installation and operation of each component, system and system -to -system interface in accordance with the ❑ ❑ approved plans and specifications. 5.410.2.5 Documentation and training. A Systems manual and systems operations training are required. ❑ ❑ 5.410.2.5.1 Systems manual. The systems manual shall be delivered to the building owner or representative and facilities operator and shall ❑ ❑ include the items listed in Section 5.410.2.5.1. 5.410.2.5.2 Systems operations training. The training of the appropriate maintenance staff for each equipment type and/or system ❑ ❑ shall include items listed in Section 5.410.2.5.2. 5.410.2.6 Commissioning report. A complete report of commissioning process activities undertaken through the design, construction and ❑ ❑ reporting recommendations for post -construction phases of the building project shall be completed and provided to the owner or representative. 5.410.4 Testing and adjusting. Testing and adjusting of systems shall be required for buildings less than 10,000 square feet or new systems to serve an addition or alteration subject to Section 303.1. 5.410.4.2 Systems. Develop a written plan of procedures for testing and adjusting systems. Systems to be included for testing and adjusting shall include, as applicable to the project, the systems listed in Section ❑X ❑ 5.410.3.2. 5.410.4.3 Procedures. Perform testing and adjusting procedures in accordance with industry best practices and applicable national standards ❑ 1:1on each system. 5.410.4.3.1 HVAC balancing. Before a new space -conditioning system serving a building or space is operated for normal use, the system should be balanced in accordance with the procedures defined by ❑X ❑ national standards listed in Section 5.410.3.3.1. 5.410.4.4 Reporting. After completion of testing, adjusting and balancing, provide a final report of testing signed by the individual responsible for ® 1:1performing these services. 5.410.4.5 Operation and maintenance manual. Provide the building owner with detailed operating and maintenance instructions and copies of El for each system prior to final inspection. 5.410.4.5.1 Inspections and reports. Include a copy of all inspection El and reports required by the enforcing agency. Page 5 of 9 CalGreen Non -Res Cheeklisi. doe revised 01123114 5.503.1 Install only a direct -vent sealed -combustion gas or sealed wood - burning fireplace or a sealed woodstove and refer to res-dential requirements ❑ ❑ in the California Energy Code, Title 24, Part 6, Subchapter 7, Section 150. 5.503.1.1 Woodstoves. Woodstoves shall comply with US EPA Phase II emission limits. ❑ ❑ 5.504.3 Covering of duct openings and protection of mechanical equipment during construction. At the time of rough installation or during storage on the construction site and until final startup of the heating and cooling equipment, all duct and other related air distribution component ❑X ❑ openings shall be covered with tape, plastic, sheet metal or other methods acceptable to the enforcing agency to reduce the amount of dust or debris which may collect in the system. 5.504.4 Finish material pollutant control. Finish materials shall comply with Sections 5.504.4.1 through 5.504.4.4. 5.504.4.1 Adhesives, sealants, caulks. Adhesives and sealants used on the project shall meet the requirements of the following standards. 1. Adhesives, adhesive bonding primers, adhesive primers, sealants, sealant primers and caulks shall comply with local or regional air pollution control or air quality management district rules where applicable or ❑ ❑ SCAQMD Rule 1168 VOC limits, as shown in Tables 5.504.4.1 and 5.504.4.2. 2. Aerosol adhesives and smaller unit sizes of adhesives and sealant or caulking compounds (in units of product, less packaging, which do not weigh more than one pound and do not consist of more than 16 fluid ounces) shall comply with statewide VOC standards and other ❑X ❑ requirements, including prohibitions on use of certain toxic compounds, of California Code of Regulations, Title 17, commencing with Section 94507. 5.504.4.3 Paints and coatings. Architectural paints and coatings shall comply with Table 5.504.4.3 unless more stringent local limits apply. ❑X ❑ 5.504.4.3.1 Aerosol paints and coatings. Aerosol paints and coatings shall meet the Product -Weighted MIR Limits for ROC in Section 94522(a)(3) and other requirements, including prohibitions on use of ❑ ❑ certain toxic compounds and ozone depleting substances (CCR, Title 17, Section 94520 et seq). 5.504.4.3.2 Verification. Verification of compliance with this section shall be provided at the request of the enforcing agency. X❑ ❑ 5.504.4.4 Carpet systems. All carpet installed in the building interior shall meet the testing and product requirements of at least one of the standards ❑ ❑ listed in Section 5.504.4.4. 5.504.4.4.1 Carpet cushion. All carpet cushion installed in the building interior shall meet the requirements of the Carpet and Rug Institute ❑ ❑ Green Label program. 5.504.4.4.2 Carpet adhesive. All carpet adhesive shall meet the requirements of Table 5.504.4.1. ❑ ❑ Page 6 of 9 CnlGreen Non -Res Checklistdoc revised 0//23//4 5.04.4.5 Composite wood products. Hardwood plywood, particleboard and medium density fiberboard composite wood products used on the interior or exterior of the building shall meet the requirements for © ❑ formaldehyde as specified in Table 5.504.4.5. 5.504.4.5.3 Documentation. Verification of compliance with this section ❑ ❑ shall be provided as requested by the enforcing agency. Documentation shall include at least one of the following standards listed in Section 5.504.5.3. 5.504.4.6 Resilient flooring systems. For 80 percent of floor area receiving resilient flooring, installed resilient flooring shall meet at least one ❑ ❑ of the following standards listed in Section 5.504.4.6. 5.504.5.3 Filters. In mechanically ventilated buildings, provide regularly occupied areas of the building with air filtration media for outside and ❑ ❑ return air prior to occupancy that provides at least a MERV of 8. 5.504.7 Environmental tobacco smoke (ETS) control. Prohibit smoking within 25 feet of building entries, outdoor air intakes and operable windows where outdoor areas are provided for smoking and in buildings; or as enforced ❑ ❑ by ordinances, regulations or policies of any city, county, city and county, California Community College, campus of the California State University or campus of the University of California, whichever are more stringent. Ind©otr Moisture and Radon Control 5.505.1 Indoor moisture control. Buildings shall meet or exceed the provisions of California Building Code, CCR, Title 24, Part 2, Sections 1203 ❑ ❑ and Chapter 14.1. Air Quality and:Ekhaust 5.506.1 Outside air delivery. For mechanically or naturally ventilated spaces in buildings, meet the minimum requirements of Section 121 of the California ❑ ❑ Energy Code, CCR, Title 24, Part 6 and Chapter 4 of CCR, Title 8 or the applicable local code, whichever is more stringent.' 5.506.2 Carbon dioxide (CO2) monitoring. For buildings equipped with demand control ventilation, CO2 sensors and ventilation controls shall be ❑ ❑ specified and installed in accordance with the requirements of the latest edition of the California Energy Code, CCR, Title 24, Part 6, Section 121(c).' EnWronmiantal Camf©rk 5.507.4 Acoustical control. Employ building assemblies and components ❑ ❑ with STC values determined in accordance with ASTM E 90 and ASTM E 413. 5.507.4.1 Exterior noise transmission. Wall and floor -ceiling assemblies making up the building envelope shall have an STC of at least 50 and exterior windows shall have a minimum STC of 30 for any of the building ❑ ❑ locations listed in Items 1 through 3 in Section 5.507.5.1. 5.507.4.2 Interior sound. Wall and floor -ceiling assemblies separating tenant spaces and tenant spaces and public places shall have an STC of ❑ ❑ at least 40. Page 7 of 9 CalGreen Non -Res Checklist.doc revised 01123114 5.508.1 Ozone depletion and greenhouse gas reductions. Installations of HVAC, refrigeration and fire suppression equipment shall comply with Sections 5.508.1.1 and 5.508.1.2. 5.508.1.1 Chlorofluorocarbons (CFCs). Install HVAC and refrigeration ❑ equipment that does not contain CFCs. 5.508.1.2 Halons. Install fire suppression equipment that does not contain ElHalons. ED Page 8 of 9 CalGreen Non -Res Cheeklist.doe revised 01/23/14 CALGREEN SIGNATURE DECLARATIONS Project Name: YAY D Z Project Address: 2-06Q-2- 0 1068-+ H o vwe 5s ,e J Project Description: _TL - PZ-zsfiuurA,,,,t SECTION 1 - DESIGN VERIFICATION Complete all lines of Section 1 — "Design Verification" and submit the completed checklist (Columns 1 and 2) with the plans and building permit application to the Building Department. The owner and design professional responsible for compliance with CalGreen Standards have revised the plans and certify that the items checked above are hereby incorporated into the project plans and will be implemented into the project in accordance with the requirements�,et forth in the 2013 California Green Building Standards Code as ad9pt6_d)6y the City of Cupertino. Signature/, R ich 0-r6k Trt rtmP 1-e_r Date i L_ .So 4 v4v U�'�auiLcr Owner's Name (Please Priest) "—- qn.A w_ Design Professional's Signature k_6 Ck-i iUl at -0" Design Professional's Name (Please Print) Signature of License Professional responsible for CalGreen compliance Name of License Professional responsible for CalGreen compliance (Please Print) Wtt0ft 9 d- itccwli . CoM Email Address for License Professional responsible for CalGreen compliance SECTION 2 - IMPLEMENTATION VERIFICATION . `l-/C- Signature f l-QC- to/13/ 2015 Date Date (-6 ) 01- 65 I Phone Complete, sign and submit the competed checklist, including column 3, together with all original signatures on Section 2 to the Building Department prior to Building Department final inspection. I have inspected the work and have received sufficient documentation to verify and certify that the project identified above was constructed in accordance with this Green Building Checklist and in accordance with the requirements of the 2013 California Green Building Standards Code as adopted by the City of Cupertino. Signature of License Professional responsible for CalGreen compliance Date Name of License Professional responsible for CalGreen compliance (Please Print) Phone for CalGreen Page 9 of 9 CalGreen Non -Res Checklisi.doc revised 01123114 0 1 'PPIICI r"ll"Wo"W, Cray„1,, Food service equipment cut sheets YAYOI 20682 & 20684 Homestead Road, Cupertino, CA 95014 zuM ® Z1996-24 MOP SERVICE BASIN 24 x 24 [610 x 6101 LIGHT COMMERCIAL IC TAG 1 Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice 12 24 [610] 24 [610] OPTIONS (Check/specify appropriate options) 24 [610] 24 [610] 0 [254] I O �10 [254]x{ ENGINEERING SPECIFICATION: Z1996-24 Mop Service Basin 24 x 24 x 10 [610 x 610 x 254] Molded high density composite basin, PVC drain body, stainless steel strainer and 3 [76] gasketed outlet connection. Certifications: Meets ANSI Z124.6, CSA listed,and IAPMO listed under file # 3561. SUFFIXES -AW White Body -BS Stainless Steel Bumper Guard -BV Vinyl Bumper Guard -HH Hose and Hose Bracket -MH Mop Hanger -NHG PVC Drain Gasket for No -Hub Pipe -PRP Pipe Reducer for PVC Drain -PRS Pipe Reducer for Stainless Steel Drain -SDL Stainless Steel Drain with Dome Strainer, Lint Basket and LockingNut -SF Service Faucet ® UPC -WG Wall Guard #20 Gage Type 304 Stainless Steel (2 Panels -Indicate Size) ZURN INDUSTRIES, LLC ♦ SPECIFICATION DRAINAGE OPERATION ♦ 1801 Pittsburgh Ave. ♦ Erie, PA 16514 Phone: 8141455-0921 ♦ Fax: 8141454-7929 ♦ World Wide Web: wwwzum.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 9054405-8272 Fax: 9 05140 5-1 292 Rev. K Date: 03/06/13 C.N. No. 128895 Prod./Dwg. No. Z1996-24 Appprox. Product Mop Basin Size Wt. Lbs. [kg] Z1996-24 24 x 24 x 10 50 [610 x 610 x 254] [23] OPTIONS (Check/specify appropriate options) 24 [610] 24 [610] 0 [254] I O �10 [254]x{ ENGINEERING SPECIFICATION: Z1996-24 Mop Service Basin 24 x 24 x 10 [610 x 610 x 254] Molded high density composite basin, PVC drain body, stainless steel strainer and 3 [76] gasketed outlet connection. Certifications: Meets ANSI Z124.6, CSA listed,and IAPMO listed under file # 3561. SUFFIXES -AW White Body -BS Stainless Steel Bumper Guard -BV Vinyl Bumper Guard -HH Hose and Hose Bracket -MH Mop Hanger -NHG PVC Drain Gasket for No -Hub Pipe -PRP Pipe Reducer for PVC Drain -PRS Pipe Reducer for Stainless Steel Drain -SDL Stainless Steel Drain with Dome Strainer, Lint Basket and LockingNut -SF Service Faucet ® UPC -WG Wall Guard #20 Gage Type 304 Stainless Steel (2 Panels -Indicate Size) ZURN INDUSTRIES, LLC ♦ SPECIFICATION DRAINAGE OPERATION ♦ 1801 Pittsburgh Ave. ♦ Erie, PA 16514 Phone: 8141455-0921 ♦ Fax: 8141454-7929 ♦ World Wide Web: wwwzum.com In Canada: ZURN INDUSTRIES LIMITED ♦ 3544 Nashua Drive ♦ Mississauga, Ontario L4V1L2 ♦ Phone: 9054405-8272 Fax: 9 05140 5-1 292 Rev. K Date: 03/06/13 C.N. No. 128895 Prod./Dwg. No. Z1996-24 MODEL: HS -5 PROJECT: YAYOI Cupertino PRODUCT IMAGES HS -9 HS -2 HS -4 i„ '/imm ria r OF ' a HS -5 HS -6 HS -7 ri Ala m HS -8 HS -10 HS -20 1 .X HAND SINKS WALL MOUNT HAND SINKS ITEM #: 2 QTY: 2 STANDARD FEATURES ■ Fabrication 20 gauge stainless steel. All seams tig welded and polished ■ Bowl Deep drawn with stamped rim to prevent spillage ■ Wall Mounting Bracket Offset design for added strength ■ Faucet 4" on center wall mount faucet included on most models ■ Drain Stainless Steel ■ Drain with Overflow Stainless Steel with plastic overflow tube and inlet ■ Plumbing '/2" IPS hot and cold water. 1 V2" IPS drain outlet. Install at 36" working height.'/2" faucet supply 12" from floor. 1 '/2" drain line 23'/4" from floor. (3'/2" IPS drain on Model HS -20) ■ Low Lead Compliance Low Lead Compliant faucet options are available to meet California AB -1953 and Vermont S152 standards OPTIONAL ACCESSORIES ■ H-100 Chrome Plated 1 '/2" IPS P -Trap ■ H-101 Deck Mount Soap Dispenser ■ H-102 Upgrade: Low Lead Wrist Handle Faucet ■ H-103 Wrist Handle Kit ■ H-104 Wall Mount Soap Dispenser ■ H-105 Wall Mount Towel Dispenser ■ H-106 One Side Splash (Specify Side) ■ H-107 Two Side Splashes ■ H-108 Stainless Steel Skirt ■ H-109 Upgrade: Low Lead Royal Series Faucet ■ H-110 Side Support Brackets ■ H-111 Soap & Towel Dispenser ■ H-200 Upgrade: Low Lead Commercial Series Faucet APPROVED BY: CERTIFICATIONS: Due to our commitment to continued product improvement, specifications are subject to change without notice. Printed in the USA Krowne Metal Corporation Rev. 112013 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 No. 2.1 sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal MODEL: PROJECT: WALL MOUNT HAND SINKS HS -9 HS -5 15" 10., HS -2 HAND SINKS WALL MOUNT HAND SINKS ITEM #: HS -6 15 lbs. 76 14"� 15" 0" 06 oW - O11 -_6-58.. 10'• t9 -t 2" - �, cz-ia a sa ~ 11 lbs HS -4 QTY: 16 14 lbs. II 1a.._ II a ,q -4 10" 1&12" HS -7 18" 23' HS -8 HS -10 HS -20 16-- 1-14 35 lbs. 19 lbs. 16' 4' f 1 z.. I iI 1 7 i - 1 q1'-- sa r14' Z L� I. �' r I 1 1 �. 116. fi �u NSF APPROVED BY: CERTIFICATIONS: Due to our commitment to continued product improvement, specifications are subject to change without notice. Printed in the USA Krowne Metal Corporation Rev. 1/2013 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 No. 2.1 sales@krowne.com 9 www.krowne.com 9 www.facebook.com/KrowneMetal 9 www.twifter.com/KrowneMetal REFR/GERATOR IWANUFACTURER kulin,� �0 a 1250 Victoria St 90746 Carson, 0-100 Tel. 310-9-9 00-1000 more durable,convenient,beautiful Fax. 310-900-1077 www.turboairinc.com FEATURES N ITS ■ EASY TO ASSEMBLE ■ ALL EDGES ARE FINISHED TO PROVIDE SAFETY NSF ■ H/L FINISHED STAINLESS STEELTOP ■ TOP REINFORCED WITH WELDED "HAT" CHANNEL FRAMEx SOUND -DEADENING TAPE BETWEEN CHANNEL FRAME AND TOP ■ GUSSETS ARE RECESSED INTO CHANNEL FRAME TO PREVENT LATERAL MOVEMENT 3 ■ ENDS ARE TURNED DOWN 90 DEGREES PROVIDING FLUSH' INSTALLATION ■ GALVANIZED LEGS, UNDER SHELF AND GUSSETS ARE STANDARD ON ALL MODELS EXCEPT ON ALL S/S MODELS ■ ECONOMIC MODELS AVAILABLE (430 S/S) Project: YAYCI Cupertino Model # :TSW-2424E. TSW-3036E, TSW-2430E, TSW-2472E, Item # : 3,15,19,28,34,35 QtY : 9 Available WIH : Approval : Model: TSW it • TSW-2436E (Unit: inch) Model Ga. W L H Net Weight t S/S 430 S/S 304 S/S 304 S/S 304 Flat Top Flat Top 11/T Rear Up -turn Flat Top. All S/S E S SB SS TSW'-2424E TSW-24245 TSW'-2424SB TSW-2424SS 18 24 24 34 31 31 31 31 'I'SW-2430E TSW-2430S "1'SW-2430SB TSW-2430SS 18 24 30 34 37 37 37 37 TSW-2436E TSW-2436S TSW-2436SB "1'SW-2436SS 18 24 36 34 42 42 42 42 TSW-2448E rSW-2448S TSW-2448SB TSW-2448SS 18 24 48 34 52 52 52 52 TSW-2460E TSW-2460S 'CSW-2460SB TSW'-2460SS 18 24 60 34 66 66 66 66 "CSW -2472E TSW-2472S TSW-2472SB TSW-2472SS 18 24 72 34 70 70 70 70 TSW-2496E TSW-2496S TSW-2496SB TSW-2496SS 18 24 96 34 104 104 104 104 TSW-3018E TSW-3018S TSW-3018SB TSW-30I8SS 18 30 18 34 30 30 30 30 TSW-3030E TSW-3030S TSW-3030SB TSW-303OSS 18 30 30 34 42 42 42 42 TSW-3036E TSW-3036S TSW-3036SB TSW-3036SS 18 30 36 34 48 48 48 48 TSW-304SE TSW-30485 TSW-3048SB TSW-3048SS 18 30 48 34 59 59 59 59 TSW-3060E TSW-30605 TSW-3060SB TSW-3064SS 18 30 60 34 74 74 74 74 TSW-3072E TSW-30725 TSW-3072SB TSW'-3072SS 18 30 72 34 90 90 90 90 TSW-3084E 18 30 84 34 102 - - - "I'SW-3096E TSW-3096S TSW-3096SB TSW-3096SS 18 30 96 34 117 117 117 117 Information and specifications are .ubject to change without notice. ' All units shipped knocked -down. Ver 2013.02 f All net weights are approximated. Crafting fee will be added for shipping via common carriers (Please confirm at the time of the purchase). TSW-2436E //////N►MERCIAL GAS Rl r RER-55AS is great for cooking ......, smctl� `ar large quantities of rice to perfection.. i% it CC Rice Cooker in North America with both CSA & NSF Certification 'C;iaGcs Rice in Large or Small Ovantities (25-55 cups ' * Automatic Two -Stage Burner Automatic Simmer' • ''Accurate & Dependable Thermostat • Propane and Natural Gas for More Efficient Cooking • Durable Handles H IF I UTI ON S OTHER RINNAI PRODUCTS AVAILABLE TAN CONVECTORS RESIDENTIAL TANKLESS HEARTHPRODUCTS WATER HEATERS i � iimii 1 � � ijv rve,cryrea�r axe, rf Olt+rxrawr +r�rret �/� Rinnai Corporation 103 International Drive Peachtree City, GA 30269 TOLL FREE: 1-800-621-9419 FAX: 678.364.8643 Visit our website: www.rinnai.us Email: marketing@rinnai.us cC 2006 Rinnai Corporation CAPACITY 25 - 55 Cups GAS -INPUT/ BURNER 35,000 34,000 GAS CONNECTION 1/2' NPT Female, i GAS SUPPLY Win 6"WC Min Tl"WC PRESSURE (WO Max 103" WC Max 13" WC MANIFOLD PRESSURE 10"WC Max 10.5"WC WEIGHT 35 lbs Rinnoi is continually updating and improving products, therefore, specifications are subject to charige without prior notice. total, stale, provincial and federal codes must be adhered to prior to installation. Sell awners manual for complete, specificotions. CONTACT YOUR LOCAL AUTHORIZED DEALER OR CALL 1-866-RININAI-1 Rinnai. LIT_RER55AS 3/2006 y HIGH QUALITY 304 STAINLESS STEEL ONSF, Faucet sold seperately Project : YAYOI Cupertino Model # : TSB -1-N _..... -- ....... ._ Item #: 5 Qty Available W/H : Approval : 1 Model: TSA-1MOP TSA -1-N / TSB -1-N / TSC -1-N ■ ENTIRE ASSEMBLY IS FUSED, SHIELDED AND POLISHED PROVIDING A ONE-PIECE SEAMLESS SINK UNIT ■ WELDED AREAS ARE HIGH-SPEED BELT BLENDED TO MATCH ADJACENT SURFACES WITH THE CONTINUITY OF A SATIN FINISH ■ ALL SINK COMPARTMENTS ARE COVERED ON A FULL 5/8" RADIUS AND CONSTRUCTED USING STATE OF THE ART SEAMLESS WELDING TECH- NIQUES ■ DIE -STAMPED CREASED DRAIN BOARDS FOR POSITIVE DRAINAGE ■ SWIRL AWAY BOWL DRAINAGE ■ GALVANIZED LEGS AND GUSSETS ■ ADJUSTABLE ABS BULLET FEET ■ STAINLESS STEEL LEGS AVAILABLE (OPTIONAL) M (unit: inch) Model 1250 Victoria St 7ui �0 �,� 90746 Carson, -9 0-100 Tel. 310-900-1000 Width Fax. 310-900-1077 more durable,convenient,beautiful www.turboairinc.com HIGH QUALITY 304 STAINLESS STEEL ONSF, Faucet sold seperately Project : YAYOI Cupertino Model # : TSB -1-N _..... -- ....... ._ Item #: 5 Qty Available W/H : Approval : 1 Model: TSA-1MOP TSA -1-N / TSB -1-N / TSC -1-N ■ ENTIRE ASSEMBLY IS FUSED, SHIELDED AND POLISHED PROVIDING A ONE-PIECE SEAMLESS SINK UNIT ■ WELDED AREAS ARE HIGH-SPEED BELT BLENDED TO MATCH ADJACENT SURFACES WITH THE CONTINUITY OF A SATIN FINISH ■ ALL SINK COMPARTMENTS ARE COVERED ON A FULL 5/8" RADIUS AND CONSTRUCTED USING STATE OF THE ART SEAMLESS WELDING TECH- NIQUES ■ DIE -STAMPED CREASED DRAIN BOARDS FOR POSITIVE DRAINAGE ■ SWIRL AWAY BOWL DRAINAGE ■ GALVANIZED LEGS AND GUSSETS ■ ADJUSTABLE ABS BULLET FEET ■ STAINLESS STEEL LEGS AVAILABLE (OPTIONAL) M (unit: inch) Model Ga. Bowl Size (L' x W' x H') Length Width Height # of Faucet Accepted Net Weight " (Ibs.) TSA-1MOP 18 18x18x13 21 211/2 441/2 1 30 TSA -1-N 18 18x18x13 21 211/2 441/2 1 30 TSB -1-N 16 24x24x14 27 271/2 441/2 1 51 TSC -1-N - 18x21 x14 21 241/2 441/2 1 - Ver20121I Information and specifications are subject to change without notice, All net weights are approximated. Crafting fee will be added for shipping via common carriers (Please confirm at the time of the purchase). Range of California, Inc. Deep Fat Fryer Item: 6 Quantity: Project: Models: ❑ RFT -25 ❑ RFT -2525 9RFT-50 ❑ RFT -DS Standard Features ■ All stainless steel front and sides YAYOI Cupertino Gas Type: ❑ Natural ❑ LP Elevation (if above 2000 ft.): Options and Accessories ❑ Stainless steel tank cover ❑ Stainless steel side splash guard ❑ Stainless steel joiner strip ❑ 48" quick disconnect and restraining cable ❑ 5" swivel casters (set of four - 2 locking) ■ 50 Ib capacity stainless steel tank assembly (RFT -50) ■ 25 Ib capacity stainless steel tank assembly (RFT -25) ■ Frying Area: 14" x 14" (RFT -50), 6%" x 14" (RFT -25) ■ Cast iron burners rated at 38,000 BTU/hr each ■ Millivolt control system with 100% safety shut off ■ Thermostatic control with 2000 - 400° F range ■ Twin fry baskets with plastic coated handles for ease of handling ■ 11/4" full port drain valve ■ 6" high adjustable heavy duty legs ■ Five year limited (prorated) warranty on SIS tank ■ DS - Dump Station Royal Range of California, Inc. NSF® 3245 Corridor Dr. • Eastvale, CA 91752 • (800) 769-2414 • (951) 360-1600 Fax: (951) 360-7500 • www.royalranges.com • sales@royalranges.com MADE IN U. S. A. 4 L LL i� L^ CL 0 I-- 15z RFT -2525 RFT -50 Range of California, Inc. 304" 454" Model Number Cooking Area Number of Burners Total BTU Ship Weight RFT -25 63/4" x 14" 2 76,000 115 lbs. RFT -2525 (2)61/4" x 14" 4 152,000 230 lbs. RFT -50 14" x 14" 3 114,000 210 lbs. RFT -DS I 1 1 130 lbs. Notes: ■ Burner rated at 38,000 BTU/hr each Gas Connection: 3/4" NPT on the left hand rear of the appliance. No external pressure regulator required. Gas Pressure: 4" W.C. Natural Gas 11" W.C. Propane Clearances: Specify type of gas and altitude, if over 2,000 feet, when ordering. Due to continuing product development to ensure best possible performance, these specifications are subject to change without prior notification. Royal Range of California, Inc. 3245 Corridor Dr. • Eastvale, CA 91752 • (800) 769-2414 • (951) 360-1600 Fax: (951) 360-7500 • www.royalranges.com • sales@royalranges.com 1/15 Combustible Non -Combustible Rear 6" 0" Sides 6" 0" Specify type of gas and altitude, if over 2,000 feet, when ordering. Due to continuing product development to ensure best possible performance, these specifications are subject to change without prior notification. Royal Range of California, Inc. 3245 Corridor Dr. • Eastvale, CA 91752 • (800) 769-2414 • (951) 360-1600 Fax: (951) 360-7500 • www.royalranges.com • sales@royalranges.com 1/15 ZZZCRMR27/48 Z3 rCRMR2/ 3 3/ 1 13 Item # 13286 Commercial Series Undercounter Refrigerators Hoshaaki America, Inc. reserves the right to change specifications without notice. MSF C UL US LISTED • Stainless steel exterior front, sides and top • Anodized Aluminum interior sides and back with stainless steel interior floor • Stainless steel exterior door with ABS interior liner • Cabinet and doors are insulated with 2" of CFC free, foamed in place polyurethane • Exclusive "stepped" door design to protect door gasket • Spring assisted self-closing doors with stay open feature • Extruded aluminum flush mount door handle • Field reversible doors • Magnetic door gasket is easily removable for cleaning • Enamel coated evaporator coil • Anodized aluminum shelf supports adjustable in ''/2" increments • Standard with 4" stem casters (two with brakes) • Three years parts and labor warranty • Five year compressor warranty • 8 ft. cord and plug ' CRMR27 and CRMR48 are ENERGY STAR qualified Dimensions / Capacity Model # One Section CRMR27 Two Section CRMR48 Nominal Storage Capacity (CF) 7.2 ft' 13.66 f' Interior Storage Capacity (CF) (ARAM) 6.22 ft' 11.95 ft' Overall Width x Depth 27" x 30" 48" x 30" Height (including 4" casters) 33.63" 33.63" Door Opening Width x Height 22.6' x 22.9" 19.5' x 22.9" Depth with Door open at 90° 54.5' 51.5" Adjustable Shelves 1 2 Shelf Dimensions W x D 22.0" x 16.0" 21.3"x 16.0" Crated Shippinq Weight 160 lbs 222 lbs Crated Height x Width x Depth 36.5" x 31.5" x 34" 36.5" x 52.5- x 34' Electrical / Refrizeration Data Model # One Section CRMR27 Two Section CRMR48 Amperage 2.6 2.6 Energy Consumption (kwh/day) ENERGY STAR .65 1.44 Heat Rejection (BTU/Hr.) @NSF 180 327 Approx. Nominal Compres. BTU/HR(HP) 1029(1/6HP) 1029(1/6HP) Item # 7 Project: YAYOI Cuperyno Qty 5 °AutoCad available on KCL CRMR Dimensions W x D x H Section - 27" x 30" x 33.63- 2 Section - 48" x 30" x 33.63"* *with 4" casters Electrical/Refrigeration Voltage 115/60/1 HACR Breaker I & 2 Section - 15.0 Electrical Connection (NEMA) I & 2 Section - 5 -ISP Voltage Range 104-126 Ambient Temp. Range 45` -100' F Control Setpoint Range 20' w52' F *Refrigerant R -134a Warranty Valid in United States, Canada, Puerto Rico, and U.S.Territories. Contact factory for warranty in other countries. Three Year - Parts & Labor on entire machine. Five Year - Parts on: Compressor. Options • 2.25" Casters - to meet ADA 6" Casters Additional epoxy shelves Cylinder locks -01 (factory installed) 1 1 © HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com ZZZ CRMR27/48 Commercial Series Undercounter Refrigerators I ® I I I I I I I I I— 22.75" 33.63' I I I I I I I — — — — — — — — — — — ®I T 3.63" CRMR27 FRONT 30' SIDE (Cross Section) PLAN VIEW I 27' I I 51.5" I I 43.74" — I I I I I CRMR48 FRONT 54.5' I I I I 33.63' I fr I I I I T 3.63" Cabinet Construction The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are anodized aluminum with an ABS ceiling and stainless steel floor. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the shelves are adjustable in ''/2" increments. Cabinet walls and doors are insulated with 2" of environmentally friendly, CFC free, foamed in place polyurethane. 4" polyolefin, stem casters (two with brakes) are standard. Door Construction Doors are constructed of high grade stainless steel exterior with an ABS interior liner. Hoshizaki's exclusive "stepped" design protects the gasket while product is removed from the cabinet. Doors are provided with a one piece, extruded aluminum, flush mount handle. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Snap -in magnetic door gaskets are durable and easily removed for cleaning. Field reversible door hinging is standard. Refrigeration System The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non -electric evaporation system. A capillary tube controls the Flow of environmentally friendly R-134Arefrigerant through the evaporator. Refrigeration system utilizes an "off cycle" defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less). © HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 • TEL 800-438-6087 • FAX 800-345-1325 • www.hoshizaki.com C U� LISTED' zzz �JB C(TI' c 1 I usQ 1 Intertek Intertek � CR2S-FS Commercial Series Refrigerators • Stainless steel interior with stainless steel exterior front and sides • Refrigerant flow is controlled with a thermostatic expansion valve (TXV) • Unique "ducted" air distribution system • Solid state digital controller with temperature alarms and LED display (Fahrenheit or Celsius) • Cabinet and doors are insulated with 2-3/8" of CFC free, foamed in place polyurethane • Stainless steel exterior and interior doors come standard with locks • Exclusive stepped door design to protect recessed door gasket • Spring assisted self closing doors with stay open feature • Sturdy 8 gauge stainless steel hinge plate with welded hinge pin • Extruded aluminum flush mount door handle • Field reversible doors (with optional kit) • Evaporator coils are epoxy electrocoated (E -Coat) to help fight corrosion • Energy efficient automatic hot gas condensate evaporator • Stainless steel shelf supports • (3) epoxy coated wire shelves are standard • Standard with 4" casters factory installed (two with brakes) • Stackable (two units high) to conserve warehouse floor space • Three years parts and labor warranty • Five year compressor warranty • 8 ft. cord and plug Dimensions / Capacity Model # Two Section CR2S-FS Interior Storage Capacity (CF) 50.48 ft' Interior Storage Capacity (CF) (ARAM) 47.2 it' Overall Width x Depth 55" x 33.75" Height (including 4" casters) 79.75" Door Opening Width x Height 22" x 595' Depth with Door Open at 90° 59.25" Adjustable Shelves 6 Shelf Dimensions (W x D) 21.25" x 26" Crated Shipping Weight 540 lbs Crated Height x Width x Depth 83" x 59" x 395' Electrical / Refrigeration Data Model # Two Section CR2S-FS Amperage 5.8 Energy Consumption kwh/da @ASHRAE 3.45 Heat Rejection (BTU/Hr.) @NSF 786 Approx. Nominal Com res. BTWHR (HP) 2373 1/4HP • CR2SJS 5/29/15 Item # 13366 HoshFZalcl America, Inc. reserves the right to change specifcauons without notice. Item # 8 Project: YAYOI Cupertino Qty 2 "AuLoCad available on KCL CR2S-FS Dimensions W x D x H 2 Section - 55" x 33.75" x 79.75"* with 4" casters Electrical/ Refrigeration Voltage 115/60/1 HACR Breaker 2 Section - 15.0 Amps Electrical Connection (NEMA) 2 Section - 5-15P Voltage Range 104-126 Ambient Temp. Range 45° to 100°F Control Setpoint Range 34° to 521 *Refrigerant R- 134a Warranty Valid in United States, Canada, Puerto Rico, and U.S. Territories. Contact factory for warranty in other countries. • Three Year - Parts & Labor on entire machine. • Five Year - Parts on: Compressor. Options • Door reversal kit • Additional epoxy shelves • Stainless steel shelves Tray/Pan slides • Foot pedal door opener • Air filter • 1 � ni © HOSHIZAKI AMERICA, INC. 618 Hwy, 74 S., Peachtree City, GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com 79.75" 33.75" FRONT VIEW PLAN VIEW CR2S-FS Commercial Series Refrigerators 33.75" V 59.50" SIDE VIEW 59.25" 79.75" 75.75" 1 59.25" Cabinet Construction The exterior cabinet front, and sides, are constructed of high quality stainless steel.The exterior top, back, and bottom are constructed of coated steel. The cabinet interior is constructed of stainless steel with a unique "ducted" air flow system. Three (3) heavy duty epoxy coated shelves per section are standard. Mounted on stainless steel pilasters shelves are adjustable in I" increments. Cabinet walls and doors are insulated with 2-3/8" of environmentally friendly, CFC free, foamed in place polyurethane. An interior light is automatically activated when doors are opened. 4" factory installed polyolefin casters (two with brakes) are standard. Door Construction Doors are constructed of a high grade stainless steel exterior and interior and are standard with locks. Hoshizaki's exclusive "stepped" design protects the recessed gasket while product is being removed from the cabinet. Doors are provided with a one piece, full length extruded aluminum flush mount handle and are mounted on eight (8) gauge stainless steel hinge plates with a welded hinge pin. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Snap -in magnetic door gaskets are easily removed for cleaning. Door hinging is field reversible (with an optional door reversal hinge kit). Refrigeration System The high efficiency refrigeration system is self-contained with an epoxy electrocoated (E -Coat) evaporator for extended Iife.Top mounted refrigeration system is easily accessible for service. The refrigeration system components are assembled on a high density expanded polypropylene platform that is removable from the main unit. A unique ducted air flow system achieves uniform air distribution within the cabinet to eliminate hot spots. Condensate removal is accomplished with an energy efficient non -electric evaporation system.A thermostatic expansion valve (TXV) controls the flow of environmentally friendly R -134a refrigerant through the evaporator. Refrigeration system utilizes a heated defrost to eliminate any ice on the evaporator coil. Solid state digital controls monitor the operation and performance of the refrigeration system. The controls also provide visual high and low temperature and high and low voltage alarms. A LED display shows the cabinet temperature and is adjustable to Fahrenheit or Celsius. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less). © HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 • TEL 800-438-6087 • FAX 800-345-1325 • www.hoshizaki.com Eta catu J \ / Intertek Intertek �%• ZZZ al (op.s Intertek Intertek CF2S-FS Commercial Series Freezers • Stainless steel interior with stainless steel exterior front and sides • Refrigerant flow is controlled with a thermostatic expansion valve (TXV) • Unique "ducted" air distribution system • Solid state digital controller with temperature alarms and LED display (Fahrenheit or Celsius) • Cabinet and doors are insulated with 2-318" of CFC free, foamed in place polyurethane • Stainless steel exterior and interior doors come standard with locks • Exclusive stepped door design to protect recessed door gasket • Spring assisted self closing doors with stay open feature • Sturdy 8 gauge stainless steel hinge plate with welded hinge pin • Extruded aluminum flush mount door handle • Evaporator coils are epoxy electrocoated (E -Coat) to help fight corrosion • Field reversible doors (with optional kit) • Energy efficient automatic hot gas condensate evaporator • Stainless steel shelf supports • (3) epoxy coated wire shelves are standard • Standard with 4" casters factory installed (two with brakes) • Stackable (two units high) to conserve warehouse floor space • Three years parts and labor warranty • Five year compressor warranty • 8 ft. cord and plug CF2S-FS is ENERGY STAR qualified Dimencinns ! Canarity Model # Two Section CF2S-FS Interior Storage Capacity (CF) 50.4811' Interior Storage Capacity (CF) (ARAM) 47.21t' Overall Width x Depth 55" x 33.75' Height (including 4" casters) 79.75' Door Opening Width x Height 22" x 59.50" Depth with Door Open at 90` 59.25' Adjustable Shelves 6 Shelf Dimensions (W x D) 21.25"x 26" Crated Shipping Weight 545 lbs Crated Helciht x Width x Depth 83" x 59" x 39.5' Electrical 1 Refrigeration Data Model # Two Section CF2S-FS Amperage 11 Energy Consumption kwh/da @ASHRAE 12.11 Heat Rejection (BTU/Hr.) @NSF 2240 Approx. Nominal Com res. BTU/HR HP 3000 5/8HP CF2S-fS 5/29/ 15 Item # 13367 Hoshimkl America, Inc. reserves the right to change s peafications without notice. Item # 9 Project: YAYOI Cupertino Qty:1 "AutoCad available on KCL CF2S-FS Dimensions WxDxH 2 Section - 55" x 33.75" x 79.75"* *with 4" casters Electrical/Refrigeration Voltage 1 15/60/ 1 HACR Breaker 2 Section - 15.0 Amps Electrical Connection (NEMA) 2 Section - 5-15P Voltage Range 104-126 Ambient Temp. Range 45° to 100°F Control Setpoint Range -10° to + 12°F *Refrigerant R -404A Warranty Valid in United States, Canada, Puerto Rico, and U.S. Territories. Contact factory for warranty in other countries. • Three Year - Parts & Labor on entire machine. • Five Year - Parts on: Compressor. Options • Door reversal kit • Additional epoxy shelves • Stainless steel shelves • Tray/Pan slides • Foot pedal door opener • Air filter • n� @ HOSHIZAKI AMERICA, INC. 618 Hwy, 74 S., Peachtree City, GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com ZZZ CF2S.FS m Commercial Series Freezers " 33.75" 79.75" FRONT VIEW 55" 33.75' PLAN VIEW Cabinet Construction 59.50" SIDE VIEW 59.25" 79.75" 75.75" 59.25" The exterior cabinet front, and sides, are constructed of high quality stainless steel.The exterior top, back, and bottom are constructed of coated steel. The cabinet interior is constructed of stainless steel with a unique "ducted" air flow system. Three (3) heavy duty epoxy coated shelves per section are standard. Mounted on stainless steel pilasters shelves are adjustable in I" increments. Cabinet walls and doors are insulated with 2-3/8" of environmentally friendly, CFC free, foamed in place polyurethane. Perimeter door heaters prevent condensation from forming on the face of the cabinet. An interior light is automatically activated when doors are opened. 4" factory installed polyolefin, casters (two with brakes) are standard. Door Construction Doors are constructed of a high grade stainless steel exterior and interior and are standard with locks. Hoshizaki's exclusive "stepped" design protects the recessed gasket while product is being removed from the cabinet. Doors are provided with a one piece, full length extruded aluminum flush mount handle and are mounted on eight (8) gauge stainless steel hinge plates with a welded hinge pin. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Snap -in magnetic door gaskets are easily removed for cleaning. Door hinging is field reversible (with an optional door reversal hinge kit). Refrigeration System The high efficiency refrigeration system is self-contained with an epoxy electrocoated (E -Coat) evaporator for extended Iife.Top mounted refrigeration system is easily accessible for service. The refrigeration system components are assembled on a high density expanded polypropylene platform that is removable from the main unit. A unique ducted air flow system achieves uniform air distribution within the cabinet to eliminate hot spots. Condensate removal is accomplished with an energy efficient non -electric evaporation system.A thermostatic expansion valve (TXV) controls the flow of environmentally friendly R -404A refrigerant through the evaporator. Refrigeration system utilizes a heated defrost to eliminate any ice on the evaporator coil. Solid state digital controls monitor the operation and performance of the refrigeration system. The controls also provide visual high and low temperature and high and low voltage alarms. A LED display shows the cabinet temperature and is adjustable to Fahrenheit or Celsius. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less). © HOSHIZAKI AMERICA, INC. 618 Hwy, 74 S., Peachtree City, GA 30269 • TEL 800-438-6087 • FAX 800-345-1325 • www.hoshizaki.com ua � Et4 us �0 Intertek Intertek � ZZZ CRMF27-DCRMF27-Q Item #13337 1/15 Commercial Series Undercounter Freezer with Drawers Al Hoshizakl America, Inc. reserves the right to change specifications without notice. ' OURS Intertek Intertek • Stainless steel exterior front, sides and top • Anodized Aluminum interior sides and back with stainless steel interior floor • Front breathing air flow design • Stainless steel exterior drawer with ABS interior liner • Cabinet and drawers are insulated with 2" foamed in place polyurethane • Drawer slides are constructed of 16 gauge stainless steel with acetal rollers • Drawers will accommodate (1) 12" x 20" x 6" deep pan (pans by others) • Extruded aluminum flush mount drawer handle • Magnetic drawer gasket is easily removable for cleaning • Enamel coated evaporator coil • Automatic defrost • Standard with 4" stem casters (two with brakes) • Three years parts and labor warranty • Five year compressor warranty • 8 ft. cord and plug Dimensions / Caaacity Model # One Section CRMF27-D Nominal Storage Capacity (CF) 7.2 ft' Interior Storage Capacity (CF) (ARAM) 6.22 ft' Overall Width x Depth 27" x 30' Height (including 4" casters) 33.63" Drawer Opening Width x Height 22.6" x 22.9" Depth with Drawer Fully Open 49.25" Pan Capacity (12" x 20" x 6" DP Pans) 1 pan per drawer Crated Shippinq Weight 176 Ibs Crated Height x Width x Depth 36.5' x 31.5" x 34" Electrical / Refrigeration Data Model # One Section CRMF27-D Amperage 3.4 Energy Consumption (kwh/day) @NSF 3.9 Heat Rejection (BTU/Hr.) @NSF 560 Approx. Nominal Compres. BTU/HR(HP) 841(1/5HP) Item # 10 Project: YAYOI Cupertino Qty: 1 `AutoCad available on KCL CRMF-D Dimensions W x D x H Section - 27" x 30" x 33.63"" `with 4" casters Electrical/Refrigeration Voltage 115/60/1 HACR Breaker I Section - 15.0 Electrical Connection (NEMA) I Section - 5 -ISP Voltage Range 104-126 Ambient Temp. Range 45'-100'F Temperature Range -18°ro 10`F "Refrigerant R -134a Warranty Valid in United States, Canada, Puerto Rico. and U.S. Territories. Contact factory for warranty in other countries. Three Year - Parts & Labor on entire machine. Five Year - Parts on: Compressor. Options 2.25" Casters - to meet ADA 6" Casters 6" Legs Stainless steel back 00- HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City. GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com ZZZ CRMF27-D l f, Commercial Series Undercounter Freezer with Drawers i I 22.75" I 33.63" ——————— — — — — — ® T 3.63" CRMF27-D FRONT 30" i 27" CRMF27-D PLAN VIEW RIGHT SIDE VIEW 49.25" N Cabinet Construction The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are anodized aluminum with an ABS ceiling and stainless steel floor. Cabinet walls and drawers are insulated with 2" of environmentally friendly, CFC free, foamed in place polyurethane. 4" polyolefin, stem casters (two with brakes) are standard. Drawer Construction Drawer fronts are constructed of high grade stainless steel inside with ABS interior liners and are insulated with R -134a CFC free foamed in place polyurethane. Each drawer accommodates (1) 12" x 20" x 6" deep pan (pans by others). Drawer frames are formed of 14 gauge stainless steel and securely fastened in the cabinet.The drawer slides are 16 gauge stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap -in magnetic drawer gaskets are durable and easily removed for cleaning. Refrigeration System The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non -electric evaporation system. A capillary tube controls the flow of environmentally friendly R -134A refrigerant through the evaporator. Unit is provided with an automatic electric defrost to remove any ice on the evaporator coil. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less). © HOSHIZAKI AMERICA, INC. ETA c ETA j 1� .,11� (0 618 Hwy. 74 S., Peachtree City, GA 30269 •TEL 800-438-6087 •FAX 800-345-1325 • www.hoshizaki.com Intertek Intertek ... CRMR27-D ,CRMR27_ 21144 Item #13316 Commercial Series Undercounter Refrigerator with Drawers HoshFtakl America. Inc. reserves the right to change specifications without notice. Eta-0N.s �, 9 Intertek Intertek • Stainless steel exterior front, sides and top • Anodized Aluminum interior sides and back with stainless steel interior floor • Stainless steel exterior drawer with ABS interior liner • Cabinet and drawers are insulated with 2" foamed in place polyurethane • Drawer slides are constructed of 14 gauge stainless steel with acetal rollers • Drawers will accommodate (1) 12" x 20" x 6" deep pan (pans by others) • Extruded aluminum flush mount drawer handle • Magnetic door gasket is easily removable for cleaning • Enamel coated evaporator coil • Standard with 4" stem casters (two with brakes) • Three years parts and labor warranty • Five year compressor warranty • 8 ft. cord and plug Dimensions / Capacity Model # One Section CRMR27-D Nominal Storage Capacity (CF) 7.2 ft' Interior Storage Capacity (CF) (ARAM) 6.22 ft' Overall Width x Depth 27" x 30" Height (including 4" casters) 33.63" Drawer Opening Width x Height 22.6" x 22.9" Depth with Drawer Fully Open 43.25" Pan Capacity (12" x 20" x 6" DP Pans) 2 Crated Shipping Weight 176 lbs Crated Height x Width x Depth 36.5' x 31.5' x 34" Electrical / Refrigeration Data Model # One Section CRMR27•D Amperage 2.6 Energy Consumption (kwh/day) @NSF 1.4 Heat Rejection (BTUIHr.) @NSF 202.8 Approx. Nominal Compres. BTU/HR(HP) 1029(1/6HP) Item # 11 Project: YAYOI Cupertino Qty 4 "AutoCad available on KCL CRMR-D Dimensions W x D x H I Section - 27" x 30" x 33.63"" *with 4" casters Electrical/Refrigeration Voltage 115/60/1 HACR Breaker I Section - 15.0 Electrical Connection (NEMA) I Section - 5 -ISP Voltage Range 104-126 Ambient Temp. Range 45.-100'F Control Setpoint Range 20' m52 F *Refrigerant R -134a Warranty Valid in United States, Canada, Puerto Rico. and U.S. Territories. Contact factory for warranty in other countries. Three Year - Parts & Labor on entire machine. Five Year - Parts on: Compressor. Options 2.25" Casters - to meet ADA 6" Casters • t� © HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City. GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com ZZZ CRMR27-D Commercial Series Undercounter Refrigerator with Drawers ` '- - r i I I I I I I I 22.75' i 33.63" i I 1 I I I I I --- _ _---------® 3.63" CRMR27-D FRONT 30" 1 27" CRMR27-D PLAN VIEW RIGHT SIDE VIEW 43.25" M Cabinet Construction The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are anodized aluminum with an ABS ceiling and stainless steel floor. Cabinet walls and drawers are insulated with 2" of environmentally friendly, CFC free. foamed in place polyurethane. 4" polyolefin, stem casters (two with brakes) are standard. Drawer Construction Drawer fronts are constructed of high grade stainless steel inside with ABS interior liners and are insulated with R -134a CFC free foamed in place polyurethane. Each drawer accommodates ( I ) 12" x 20" x 6" deep pan (pans by others). Drawer frames are formed of 14 gauge stainless steel and securely fastened in the cabinet.The drawer slides are 14 gauge stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear.The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear.The flush mount handles are constructed of extruded aluminum. Snap -in magnetic drawer gaskets are durable and easily removed for cleaning. Refrigeration System The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non -electric evaporation system. A capillary tube controls the flow of environmentally friendly R -134A refrigerant through the evaporator. Refrigeration system utilizes an "of cycle" defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less). © HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com Intertek Intertek 5 14 Cecilwarreo BV GMCW' GAS FLOOR FRYER Project YAYOI Cupertino Features Date Models FMS403LP MS705LI Item# 12 FMS403NAT FMS504NAT FMS705NAT model FMS705 Quantity 2 • Heavy-duty stainless steel construction and fry pot for long life and easy maintenance • Models available in either natural or LP gas • 6 -inch adjustable legs • 36.25" working height • Invensys® thermostat 200 - 400 degrees Fahrenheit • Auto reset high limit • 1-1/4" ball type full port drain • Cool zone in fry tank • Two nickel chrome wire mesh fry baskets included "'GMCW" �)R� Food 1013 Form k CW -238-02 Service � w Models & Dimensions T Ou S Gas Floor Fryer C�+ A�STN 0 model FMS705 represented measurements in mm [inches] kpecifications Model BTU / Hour Burners Product Dimensions Tank Size Capacity and Construction FMS403LP 90,000 Three (30,000) 15.5" W x 30.25" D x 48.125" H 14" x 14" 40 lbs. (555700) BTU tubes mm: 394 W x 768 D x 1,222 H mm: 356 x 356 18 kg. FMS403NAT (555710) Stainless steel tank and galvanized sides FMS504LP 120,000 Four (30,000) 15.5" W x 30.25" D x 48.125" H 14" x 14" 50 lbs. (555720) BTU tubes mm: 394 W x 768 D x 1,222 H mm: 356 x 356 23 kg. FMS504NAT (555730) Stainless steel tank and galvanized sides FMS705LP 150,000 Five (30,000) 21.0" W x 30.25" D x 48.125" H 19.5" x 14" 70 lbs. (555740) BTU tubes mm: 533 W x 768 D x 1,222 H mm: 495 x 356 32 kg. FMS705NAT (555750) Stainless steel tank and galvanized sides TM GMCW' GMCWTm 4003 Collins Lane, Louisville, KY 40245 USA Tel: +1.502.425.4776 / 800.695.4500 (USA & Canada only) • Fax: +1.502.425.4664 • www.gmcw.com • Email: info@gmcw.com 0 2013 GMCWTM PRINTED IN USA 1013 Form # CW -238-02 REFRIGERATOR MANUFA= TUBER 4184 F. Conant st. Long Beach, CA unbo air Tell. 10-900-11000 808 Fax. 310-900-1077 more durable, efficient, beautiful WWW.tLirboairinc.com HIGH QUALITY 304 STAINLESS STEEL BODY ■ ALL 304 STAINLESS STEEL ■ WIDE SELECTION OF SIZES ■ DIE -FORMED MOUNTING BRACKETS ■ SPACE -SAVING WALL MOUNT DESIGN "moil Project : YAYOI Cupertino Model # : TSWS-1224 Item # : 13 Available W/H Approval D -_ Qty : 1 Model: TSWS- (Unit : inch) Model' Ga. L D H Net Weight t TSW'S-1224 18 24 12 10 8 TSWS-1236 18 36 12 10 10 TSWS-1248 18 48 12 10 13 TSW'S-1260 18 60 12 10 16 TSWS-1272 18 72 12 10 18 TSWS-1284 18 84 12 10 21 TSWS-1296 18 96 12 10 23 TSWS-1424 18 24 14 11 9 TSWS-1436 18 36 14 11 12 TSWS-1448 18 48 14 11 15 TSWS-1460 18 60 14 11 18 TSWS-1472 18 72 14 11 21 T h1 W S-1922 18 22 19 10 10 Ver.201at0 Information and specifications are subject to change without notice. 'All units shipped knocked -down. t All net weighls are approximated. Crafting fee will be added for shipping via common carriers (Please confirm at the time of the purchase). 1111IRaoiancc— 4184 E. Conant st., Long Beach, CA 90808 Tel. 800-500-3519 Fax. 310-900-1066 www.turboairinc.com Project: YAYOI Cupertino Model-# : - ..... —-- ................. Item # : 14 Qty = 1 Available W/H Approval 210 210 FEATURES & BENEFITS ■ Adjustable gas valve ■ Individual left and right gas controls ■ Spring balanced grid ■ 5 locking positions Model: TASM-36 ■ Can be mounted over Radiance range and can also be wall or counter mounted ■ Stainless steel grid ■ Stainless steel front & sides ■ CSA certified for safety / sanitation for ■ Rolling out grid for easy loading and unloading USA and Canada ■ Removable grease pan for easy cleaning �— SANITATION NSF/ANSI a Model Weight (lbs.) Length (inches) Total BTUs TASM-36 TASM-36-LP 210 210 36 36 35,000 35,000 Ver.201501 Model: TASM-36 DATA Gas Type Gas Connection Regulator Gas Pressure DIMENSIONAL DATA Ext. Length Overall (inch) ....... -......... ....... .-�.�.._....... Ext. Depth Overall (Inch) Ext. Height Overall (inch) TASM-36 TASM-36-LP NAT _..-.... LPG 3/4" ._....... 3/4" 1 1 S.W.C" 10.W.C" 36 (914mm) 36 (914mm) 201/2 (519mm) __........ 201i,, (519mmi _.- 19 (483mm) 19 (483mm) Design and specifications subject to change without notice. Actual shipping weight may differ due to extra packing materials for product protection. ■ WARRANTY : 1 Year Parts and Labor Warranty Ver.201501 PLAN VIEW nn 7 (unit : inch) T 7I'A .... IlR3m01) (36mm) v; fr TOP VIEW 36 OI,imm) FRONT VIEW SIDE VIEW ......_a. t43mml c1p ■ Turbo Air: 800-627-0032 ■ GK: 800-500-3519 ` O■ Warranty: 800-381-7770 toAC: 888-900-1002 SANITATION NSF/ANSI 4 Turbo ci/r GER KN/FE IIIRamanCC GRILN WORLD "i air ZZZ CRMR48-D4 CRMR488/144 Item #13333 Commercial Series Undercounter Refrigerator with Drawers Hoshiald America Inc. reserves the right to change specifications without notice. Eta CON Intertek Intertek • Stainless steel exterior front, sides and top • Anodized Aluminum interior sides and back with stainless steel interior floor • Front breathing air flow design • Stainless steel exterior drawer with ABS interior liner • Cabinet and drawers are insulated with 2" foamed in place polyurethane • Drawer slides are constructed of 16 gauge stainless steel with acetal rollers • Drawers will accommodate (1) 1/2 and (1) 1/3 size pans, 6" deep (pans by others) • Extruded aluminum flush mount drawer handle • Magnetic drawer gasket is easily removable for cleaning • Enamel coated evaporator coil • Standard with 4" stem casters (two with brakes) • Three years parts and labor warranty • Five year compressor warranty • 8 ft. cord and plug Dimensions / Capacity Model # _ Nominal Storage Capacity (CF) Two Section CRMR48-D4 13.66 ft Interior Storage Capacity (CF) (AHAM) 11.95 ft' Overall Width x Depth 48" x 30" Height (including 4" casters) 33.63" Drawer Opening Width x Height 19.5" x 22.9" Depth with Drawer Fully Open 49.25" Pan Capacity (1) 112 size and (1) 1/3 size, 6" deep Crated Shipping Weight 262 lbs Crated Height x Width x Depth 36.5" x 52.5" x 34" Electrical / Refrigeration Data Model # Two Section CRMR48 Amperage 2.6 Energy Consumption (kwh/day) @NSF 2.3 Heat Rejection (BTU/Hr.) @NSF 327 Approx. Nominal Compres. BTU/HR(HP) 1029(1/6HP) Item # 16 Project: YAYOI Cupertino Qty: 1 °AutoCad available on KCL CRMR-D4 Dimensions W x D x H 2 Section - 48" x 30" x 33.63" `with 4" casters Electrical/Refrigeration Voltage 115/60/1 HACR Breaker 2 Section - 15.0 Electrical Connection (NEMA) 2 Section - 5-15P Voltage Range 104-126 Ambient Temp. Range 45'-100'F Temperature Range 32'to52'F *Refrigerant R -134a Warranty Valid in United States, Canada, Puerto Rico, and U.S. Territories. Contact factory for warranty in other countries. Three Year - Parts & Labor on entire machine. Five Year - Parts on: Compressor. Options 2.25" Casters - to meet ADA • 6" Casters 6" Legs Stainless steel back • t„ © HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com ZZZ CRMR48-D4 Commercial Series Undercounter Refrigerator with Drawers i ® , �— 19.5 33.63' T 3.63" CRMR48-D4 FRONT 48' � 30' � CRMR48-D4 PLAN VIEW 6' Cabinet Construction The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are anodized aluminum with an ABS ceiling djustable and stainless steel floor. RIGHT SIDE VIEW 49.25' One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the shelves are ain '/�" increments. Cabinet walls and doors are insulated with 2" of environmentally friendly, CFC free, foamed in place polyurethane. 4" polyolefin h ABS int er, b" de , stem casters (two with brakes) are standard. 1" Drawer Construction Drawer fronts are constructed of high grade stainless steel inside wit erior liners and are insulated with R -134a CFC free foamed in place polyurethane. Each drawer accommodates (I) I/2 size and (I) I/3 size pan per drawep (pans by others). Drawer frames are formed of 14 gauge stainless steel and securely fastened in the cabinet.The drawer slides are Ib gauge stainless steel 75 lbs. an ucted of e with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear.The drawer slides have a dynamic load capacity of 1d have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear.The flush mount handles are constrxtruded aluminum. Snap -in magnetic drawer gaskets are durable and easily removed for cleaning. Refrigeration System The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non -electric evaporation system. A capillary tube controls the e on the flow of environmentally friendly R -134A refrigerant through the evaporator. Refrigeration system utilizes an "off cycle" defrost to eliminate any icevaporator coil. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less). ©HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 •TEL 800-438-6087 •FAX 800 -345-1325 • www.hoshizaki.com Eta C Eta - s Intertek Intertek 1111IRaDlancc— 4184 E. Conant st., Long Beach, CA 90808 Tel. 800-500-3519 Fax. 310-900-1066 www.turboairinc.com Project : YAYOI Cupertino Model #: Item # : 17 OtY : 1 Available W/H Approval W x D x H'(inches) Model: TAMG-24 _ FEATURES & BENEFITS ■ Stainless steel front, sides and 4" front top ■ Adjustable stainless steel standing pilot for ledge each burner ■ 4" backsplash with tapered side splashes ■ One 22,000 BTU/hr U shaped aluminized burner for every 12" of griddle width ■ Ergonomically designed heat resistant PPS (Poly Phenylene Sulfide) On -Off knob ■ %" polished steel griddle plate ■ 2" stainless steel legs included ■ High efficiency griddle will provide faster cooking and recovery but use less gas ■ '/<" rear gas connection and gas pressure regulator ■ Available in 12", 24"1 36". and 48" wide SANIT TION '� NSF/ANSI 4 Model Control #of Burners Total BTUs plate Crated W x D x H'(inches) Depth Weight (lbs.) TAMG-24 Manual 2 44,000 22 220 24 x 301/2 x 121/2 Ver.201501 Depth does not include 3/4" for rear gas connection. t Height does not include 2" for leg height. Model: TAMC -24 DATA Gas Type NAT/LP Convertible Gas Connection 3/4" Regulator 3/4' Gas Pressure NAT : 5W.C" / LP . 1 MC" SHIPPING DATA Class 85 Length (in.) -- —...__.__...-_._..--------- 24 (610mm) Depth (in.)' 301-2 (775mm) Height (in.)t 121/2 (317mm) Shipping Weight (lbs.) 220 Desien and specificanons subject to change without notice, Actual shipping weight may differ due to e..xtra packing materials for product protection. - Depth does not include 3/4" for rear gas connection. t Height does not include 2" for leg height. ■ WARRANTY : 1 Year Labor and Parts Warranty PLAN VIEW (unit : inch) TOP TOP VIEW FRONT VIEW 301-2 (7751nm) �709a//'`.., GEA KN/FE ii�f2e-1f�Iance- �\' WORLD Tu- a/I' 4 Project: YAYOI Cupertino ori Rartg� of Ga�iforr�ia, �r�c_ STANDARD FEATURES: pal Item # 18 RHP Hotplates RHP -24-4 Shown ♦ Compact heavy gauge chassis for long life. ♦ Stainless steel sides, valve cover and plate ledge for easy cleaning. ♦ Double side panels for better insulation. ♦ 30,000 BTU cast iron burners featuring removable non -clog lift off heads with flat top design. ♦ Heavy cast iron 12" x 12" top grates with unique bowl design, level to the plate ledge so large pots are easily moved. ♦ Protected standing pilot for each burner to provide immediate safe ignition. ♦ Manual control for each burner. ♦ Full width removable crumb pan. ♦ 4" high adjustable heavy duty legs included. OPTIONS: ♦ 10" diameter Stainless Steel wok rings to fit on top grate ♦ Interchangeable wok or saute burner heads ♦ Stainless steel stand with adjustable legs ♦ Casters for stand Step up models also available (see specifications on the back) tj Royal Hot Plates are user friendly, designed to last and easy to clean. They are made of heavy gauge stainless steel with a heavy gauge chassis. The heavy cast iron top grates and large plate ledge complement the work surface. Models ranging from one to eight open burners are available. The heavy duty cast iron top grates in 12" x 12" sections can be removed easily and safely. A protected standing pilot light for each burner provides immediate safe ignition. ROYAL RANGE OF CALIFORNIA, INC. 3245 CORRIDOR DRIVE, EASTVALE, CA 91752 (800) 769-2414 in the U.S. (951) 360-1600 Fax: (951) 360-7500 1 f Ns www.royalrarrges.com E-mail: royalrange@alslextreme.com _` �1 PAIVEDIN'iHfV5A,GMl Y4 NPT RHP -24-4 Shown 4 30-3/4 Hot Plate Specifications "A" - 14" _i —2-114 a" { Step up side view Standard Hot Plates MODEL NO. WIDTH (A) DEPTH NUMBER OF TOTAL BTU SHIP WEIGHT — — — — — — —1 — — — — — — — — BURNERS' — — RHP -12-1 2" 15-3/4bs. " — — — 1 — —30,0 —00 — — — —60 L — — — RHP -12-2 12" 30-3/4" 2 60,000 95 Lbs. RHP -24-2 24" 15-3/4" 2 60,000 95 Lbs. RHP -24-4 24" 30-3/4" 4 120,000 155 Lbs. RHP -36-6 36" 30-3/4" 6 180,000 215 Lbs. RHP -48-8 48" 30-3/4" 8 240,000 280 Lbs. ' Each burner is rated @ 30,000 BTU/hr Step-up Hot Plates MODEL NO. WIDTH (A) DEPTH NUMBEROF TOTAL BTU SHIP WEIGHT BURNERS' — --2S — — RHP --12 — — —1 2" — — — — — — — 30-3/4" — — — — — 2 — —60,00 — 0— — — — — — — 95 Lbs. RHP -24-4S 24" 30-3/4" 4 120,000 155 Lbs. RHP -36-6S 36" 30-3/4" 6 180,000 215 Lbs. RHP -48-8S 48" 30-3/4" 8 240,000 280 Lbs. ' Each burner is rated @ 30,000 BTU/hr Gas Connection: 3/4" NPT on the right hand rear of the appliance Gas pressure: 5" W.C. - Natural Gas The pressure regulator (supplied) is to be connected here by the installer. 10" W.C. - Propane Combustible Clearances: Non-combustible clearances: Specify type of gas and altitude, 15 inches sides 0 inches sides if over 2,000 feet, when ordering. 6 inches rear 0 inches rear Due to continuing product development to ensure best possible performance, these specifications are subject to change without prior notification ROYAL RANGE OF CALIFORNIA, INC. 3245 CORRIDOR DR. EASTVALE, CA 91752 www.royalranges.com (8M) 769.2414, in the U.S. (951) 360-1600, Fax: (951) 360-7500, E-mail: royalrange@ds[extreme.com PRINTED IN THE u A.0a 1 n Project: YAYOI Cupertino / 4184 E. Conant St. ---.-.__ Long Beach, CA 90808 Model # : TSA -1-N Tel 800-500-3519 GREENWORLD - Fax. 310-900-1066 Item # : 20,30 Qty www.turboairinc.com Available W/H Approval HIGH QUALITY 304 STAINLESS STEEL = FEATURES & BENEFITS = ■ Entire assembly is fused, shielded and polished providing a one-piece seamless sink unit ■ Welded areas are high-speed belt blended to match adjacent surfaces with the continuity of a satin finish ■ All sink compartments are covered on a full 5/8" radius and constructed using state of the art seam- less welding techniques ■ Die -stamped creased drain boards for positive drainage ■ Swirl away bowl drainage ■ Galvanized legs and gussets are standard on all models ■ Our strainers are built with brass nuts instead of aluminum (standard) ■ Adjustable ABS bullet feet ■ Crating service available ■ Stainless steel legs available (optional) W 2 Model: TSA-1MOP TSA -1-N / TSB -1-N / TSC -1-N Faucet sold seperately (unit : inch) Model Ga. Bowl Size (L' x W' x H') Length Width Height # of Faucet Accepted Net Weight " (lbs.) TSA-1MOP 18 18 x 18 x 13 21 211/2 441/2 1 30 TSA -1-N 18 18 x 18 x 13 21 211/2 441/2 1 30 TSB -1-N 16 24 x 24 x 14 2_1 211/2 441/2 1 51 TSC -1-N - 18 x 21 x 14 j 21 211/2 441/2 1 - ver.zutbol Information and specifications are subject to change without notice. All net weights are approximated. Crafting fee will be added for shipping via common carriers (Please confirm at the time of the purchase). TAHP-12-2 Model: TAHP- TAHP-48-8 FEATURES / BENEFITS= ■ STAINLESS STEEL FRONT, SIDE AND 4" FRONT TOP LEDGE. ■ EASY CLEANING, DETACHABLE LIFT-OFF 2 PIECE BURNER. ■ CENTER CONCENTRATE DESIGN HIGH PERFORMANCE 32,000 BTU/HR BURNER. ■ REMOVABLE 12" X 12" HEAVY CAST-IRON TOP GRATES ■ GROOVED DESIGN TOP GRATE ENSURE DIRECT HEAT TO COOKING SURFACE. In TOP GRATE IS DESIGNED TO ALLOW POT TO SLIDE WITHOUT LIFTING. ■ REMOVABLE FULL WIDTH GREASE PAN. ■ ERGONOMICALLY DESIGNED HEAT RESISTANT PPS ON-OFF KNOB. ■ ADJUSTABLE STAINLESS STEEL STANDING PILOT FOR EACH BURNER. ■ 3/4" REAR GAS CONNECTION AND GAS PRESSURE REGULATOR. ■ 2" STAINLESS STEEL LEGS INCLUDED. ■ 4" STAINLESS STEEL LEGS AVAILABLE AS OPTION. ■ AVAILABLE IN 12", 24", 36" AND 48" WIDE. :�iirc:� ■ A FULL ONE YEAR LIMITED PARTS AND LABOR WARRANTY. SA4� % t,K„t SANITATION NSF(ANSI 4 Model Project : YAYOI Cupertino 1111IRaDiancc-_11111111 __ _ Model # : TAHP-24 4 — 1250 Victoria St, Carson, CA 90746 ...... - ---- - _... Item #: 21 Qty : 2 Tel. 310-900-1000 Fax. 310-900-1077 64,000 www.turboairinc.com Available W/H : TAHP-24-4 Approval : TAHP-12-2 Model: TAHP- TAHP-48-8 FEATURES / BENEFITS= ■ STAINLESS STEEL FRONT, SIDE AND 4" FRONT TOP LEDGE. ■ EASY CLEANING, DETACHABLE LIFT-OFF 2 PIECE BURNER. ■ CENTER CONCENTRATE DESIGN HIGH PERFORMANCE 32,000 BTU/HR BURNER. ■ REMOVABLE 12" X 12" HEAVY CAST-IRON TOP GRATES ■ GROOVED DESIGN TOP GRATE ENSURE DIRECT HEAT TO COOKING SURFACE. In TOP GRATE IS DESIGNED TO ALLOW POT TO SLIDE WITHOUT LIFTING. ■ REMOVABLE FULL WIDTH GREASE PAN. ■ ERGONOMICALLY DESIGNED HEAT RESISTANT PPS ON-OFF KNOB. ■ ADJUSTABLE STAINLESS STEEL STANDING PILOT FOR EACH BURNER. ■ 3/4" REAR GAS CONNECTION AND GAS PRESSURE REGULATOR. ■ 2" STAINLESS STEEL LEGS INCLUDED. ■ 4" STAINLESS STEEL LEGS AVAILABLE AS OPTION. ■ AVAILABLE IN 12", 24", 36" AND 48" WIDE. :�iirc:� ■ A FULL ONE YEAR LIMITED PARTS AND LABOR WARRANTY. SA4� % t,K„t SANITATION NSF(ANSI 4 Model #of Bumers Total BTUs Crated Weight (Ihs.) W x D x H' (inches) TAHP-12-2 2 64,000 101 12 x 30 x 10 TAHP-24-4 4 1281000 167 24 x 30 x 10 TAHP-36-6 6 192,000 233 36 x 30 x 10 TAHP-48-8 8 256,000 295 48 x 30 x 10 Vec201203 ' Height does not include 2" for leg height. Model: TAHP- GAS DATA Gas Type NAT/LP Convertible Gas Connection 3/4" Regulator 3/4" SHIPPING DATA Class 85 Width (in.) 16 / 28 / 40 / 52 Depth (in.) 32 Height (in.) 17 Shipping Weight (lbs.) 101 / 167 / 233 / 295 Design and specifications subject to change without notice. Actual shipping weight may differ due to extra packing materials for product protection. ■ WARRANTY : 1 Year Labor and Parts Warranty 0 C0 Ver.201203 TAN P-36-6 TAN P-48-8 TOP VIEW A N PLAN VIEW (unit : inch) 12 of � VIVI T=T NEJ TANP-12-2 24 o � 1 N �/�� TANP-24-4 f 36 oI� A" N TAN P-36-6 48 N UNP -48-8 FRONT VIEW SIDE VIEW �PF OCP Turbo Air:800 G27-0032 ■ GK:800-500-3519 Ps t�r;A.tt SANITATION ■ Warranty: 800-381-7770 ■ AC: 888-900-1002 NSF/ANSI 4 A—W, a1/� GER/1XM FE HlRaniancc rptt-�\) W0 1) ADVANCE TABCO, .MART FABRICATION" NEW Tile Edge Design 0 ....... . . 6 Optional Stainless Steel UNDERSHELF Die Cast LEG CLAMP secured to shelf eliminates unsightly nuts & bolts 10-1/2"" EXTRA LARGE Bold Looking Backsplash with 2" return and tile edge Nominal sizing on all dishtables for ease of Installation. STAINLESS STEEL t r DISHTABLES CLEAN STRAIGHT Item #: 22,29 Qty #: 2 Model #: DTC -S70 -36L, DTC -S70 -36R Project #: YAYOI Cupertino Spec -Line: 14 ga. 304 Series Stainless Steel Top. 16 ga 304 Stainless Steel Legs Stainless Steel Legs with Welded Cross Bracing & Stainless Steel Bullet Feet. 16 ga. 304 Series Stainless Steel Top. Standard: 16 ga. 304 Stainless Steel Legs Stainless Steel Legs with Welded Cross Bracing & Stainless Steel Bullet Feet. DTC -S60 -60R Shown Super Saver: 16 ga. 304 Series Stainless Steel Top. Optional Undershelf Galvanized Legs with Plastic Bullet Feet. Shown FEATURES: Tile edge for ease of installation. D shtable system consists of SOIL and CLEAN sections. Table is furnished with 10-1/2" splash with a 2" return. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. Stainless Steel Gussets welded to a stainless steel support channel. ACCESSORIES IT, rerds Faucet Wall Shelf Undershelf 7 7 14 Gauge 304 16 Gauge 304 16 Gauge 304 16 Ga. Stainless Steel Legs Stainless Steel Legs I Galvanized Legs Size SPEC -LINE STANDARD SUPER SAVER Approx.Nominal wt. 2 Ft. 23" DTC -S30 -24L or R DTC -S70 -24L or R DTC -S60 -24L or R 35 lbs. 3 Ft. 35" DTC -S30 -36L or R DTC -S70 -36L or R DTC -S60 -36L or R 45 lbs. 4 Ft. 47" DTC -S30 -48L or R DTC -S70 -48L or R DTC -S60 -48L or R 60 lbs. 5 Ft. 59" DTC -S30 -60L or R DTC -S70 -60L or R DTC -S60 -60L or R 70 lbs. 6 Ft. 71 " DTC -S30 -72L or R DTC -S70 -72L or R DTC -S60 -72L or R 85 lbs. 7 Ft. 83" DTC -S30 -84L or R DTC -S70 -84L or R DTC -S60 -84L or R 100 lbs. 8 Ft. 95" DTC -S30 -96L or R DTC -S70 -96L or R DTC -S60 -96L or R 110 lbs. 9 FT. 107' DTC -S30 -108L or R DTC -S70 -108L or R DTC -S60 -108L or R 225 lbs. 10 Ft. 119" DTC -S30 -120L or R DTC -S70 -120L or R DTC -S60 -120L or R 250 lbs. 12 Ft. 143" DTC -S30 -144L or R I DTC -S70 -144L or R DTC -S60 -144L or R 260 lbs. Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. Email Orders To: customer@advancetabco.com. For Smart Fabrication" Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 ADVANCE TABCO, NEW YORK GEORGIA TEXAS NEVADA -A- FCA 0 . www.advancetabco.corn Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578 P-2 N i DIMENSIONS and SPECIFICATIONS TOL ± .500" ALL DIMENSIONS ARE TYPICAL CLEAN LEFT Splash Detail DISH MACHINE OPERATOR CLEAN RIGHT CUSTOMIZE YOUR OWN SYSTEM by Ordering Optional Accessories from our PRODUCT & PRICE GUIDE Description Material 2' i STANDARD 16 Ga. 304 Series SUPER SAVER 16 Ga. 304 Series _T Stainless Steel Stainless Steel Galvanized Gussets Stainless Steel Stainless Steel 21 3/8" Bullet Feet (1" adj.) 21 3/8 J....�.. 1 1 /2" 1 1 1/2" OPERATOR CLEAN RIGHT CUSTOMIZE YOUR OWN SYSTEM by Ordering Optional Accessories from our PRODUCT & PRICE GUIDE Description Material SPEC -LINE 14 Ga. 304 Series STANDARD 16 Ga. 304 Series SUPER SAVER 16 Ga. 304 Series 1 5/8" Dia. Legs Stainless Steel Stainless Steel Galvanized Gussets Stainless Steel Stainless Steel Stainless Steel Bullet Feet (1" adj.) Stainless Steel Stainless Steel Plastic Cross Bracing Welded Welded Optional '1111 wamn,nu ADVANCE TABM P -2a 200 Heartland Boulevard, Edgewood, NY 11717-8380 2" 30" ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. © ADVANCE TABCO, DECEMBER 2009 • Auto -Chlor System's proprietary WaterSaverTM design uses as little as 1.09 gallons/rack • Powerful 1 HP purrip delivers high pressure spray and mechanical cleaning action for single pass cleaning performance • Built in water pressure regulator provides consistent water usage and cleaning results • Exclusive fill -through -the -pump feature flushes and cleans the wash pump and spray system with every cycle • External sump and screen provide easy access for cleaning • Regularly scheduled 28 -day service ensures sparkling results, minimizes mechanical problems and reduces operating costs • Benefiting from more than 75 years of improvements and dishwashing experience and knowledge A4 watersaver TM Single Rack • In Line • Low Energy Dishmachine Prnicrt• VAVCII (i incrtlnn Energy Efficient Exceeds Energy Star requirements Low temperature chemical sanitizing saves energy MiNII�N9l�'�IBU'IiIIIiYP,+NkI��IIUU,�7rNJ�1NAn1iVWYaI�W�//�I�APY�i1�/tiiioG.ii, /vrdi .,,,,, i r Total Service. Total Satisfaction. rM-c T E MJ autochloccom AM I TM 01 A44 watersaver Single Rack - In Line - Low Energy Dishmachine T Specifications Standard 90 second cycle, 38 rack/hr A - Electrical -115 VAC, 60Hz, 1 PH - 20A Dedicated Circuit Recommended - Connects to Grounded Wall Outlet or 1/2" Conduit depending on local building codes B - Water Consumption 1.09 gal/rack (41.3 GPH) - Water Supply Flow Rate 7.5 GPM Minimum Water Supply Temp 120°F Minimum - Water Supply Connection 1/2" NPT female - Backflow protection provided by ASS 1001 Vacuum Breaker C - Drain Connection 2" MPT - 20" above floor C* - Optional Scrap Accumulator - Connection 2" MPT Centerline 151/" above floor D - Wash Cavity Clearance 17" Max Height E - Rack Clearance - 20'/" between tracks - Rack Size 20" x 20" F - Table Height at Machine Entrance 34" Available Options: - Auto -Start - Leg Extensions : 3" - Vapor Removal System (VRX) - 72 second cycle, 47 Racks/hr, 51 GPH - 60 second cycle, 55 Racks/hr, 60 GPH -Tall Hood 27" Max. Height Wash Cavity Optional Supplemental Water Heaters Available An optional integrated water heating system is availatale for this model dishmachine. The integrated system mounts within the framework of the machine so no additional floor space is required. The integrated heater is ideal for facilities with insufficient water heating capacity, on -demand style water heaters, or remotely located heaters. The heater can operate on 50Aa208-240V circuits using either single or three phase power. Contact your local Auto -Chlor System representative for more information. Note: This unit does not produce heat or steam Total Service.Total Satisfaction. o W.� NSF O CIO t �. SYSTTEM LISTED ACM30002 autochlor.com R / 4184 E. Conant St. providing a one-piece seamless sink unit Long Beach, CA 90808 1 Tel. 800-500-3519 GRZEN WOR Fax. 310-900-1066 ■ All sink compartments are covered on a full 5/8" radius www.turboairinc.com HIGH QUALITY 304 STAINLESS STEEL NSF i Project: YAYOI Cu Model #: TSA -3-D1 Item # : 24 Available W/H Approval Qty : 1 Model: TSA -3-12-01 TSA -3-14-D1 TSA -3-14-02 TSA -3-D1 TSB -3-D2 FEATURES & BENEFITS seperately ■ Entire assembly is fused, shielded and polished of Swirl away bowl drainage providing a one-piece seamless sink unit ■ Galvanized legs and gussets are standard on all ■ Welded areas are high-speed belt blended to match models adjacent surfaces with the continuity of a satin finish ■ Our strainers are built with brass nuts instead of ■ All sink compartments are covered on a full 5/8" radius aluminum (standard) and constructed using state of the art seamless ■ Adjustable ABS bullet feet welding techniques 441/2 1 ■ Crating service available ■ Die -stamped creased drain boards for positive drainage 18 18 x 18 x 14 ■ Stainless steel legs available (optional) Model Ga. Bowl Size (L' x VV x H') Length Width Height # of Faucet Accepted Net Weight' (Ibs.) TSA -3-12-D1 18 18 x 18 x 12 90 24 441/2 1 84 TSA -3-14-D1 18 18 x 18 x 14 90 24 441/2 1 88 TSA -3-14-D2 18 18 x 18 x 14 102 24 44t2 1 94 TSA -3-D1 18 18 x 18 x 11 90 24 441/2 1 82 TSB -3-D2 18 24 x 24 x 14 120 30 441/2 2 161 Ver.201501 Information and specifications are subject to change without notice. All net weights are approximated. Crafting fee will be added for shipping via common carriers (Please confirm at the time of the purchase). n u,i ii ean� ieaei yea use ix... w .i,eiixe 'e. y Item # 25 KM YAY01 Cupertirn Project: _...__ 101BAH Qty. 1 `AutoCad available on KCL SELF-CONTAINED CUBERWITH BUILT-IN STORAGE BIN CUBER DIMENSIONS W x D x H 'y T KM. -101' BAS H 23"'x2A"'xJ7q* * with 6" legs KM -101 BAH Air -Cooled Shown • Up to 1 15 lbs. of ice production per 24 hours • Up to 53 lbs. of built-in storage capacity • Individual crescent cube • Durable stainless steel exterior • CycleSaveF' Designf��. • EverCheck' ' alert system • Front in, front out airflow • Stainless steel evaporator • Slide in door • Removable air filter • Power switch accessible without panel removal • Built-in installation possible • Accessory - HS -5061 Drain Pump Assembly • R- 134a Refrigerant The KM- 101BA.`1 is ENERGY STAR qualitied. Warranty NSFValid in United States, Canada, Puerto Rico, & U.S. Territories. Contact factory for warranty in `c other countries. j'� Three Year - Parts & Labor on entire machine. oC�lus Five Year - Parts & Labor on: Evaporator. Five Year - Parts on: Compressor, air-cooled condenser coil. © HOSHIZAKI AMERICA, INC. One Year - HS -5061 Drain Pump Assembly - Parts & Labor. 618 Hwy. 74 S., Peachtree City, GA 30269 1 TEL 1-800-438-6087 1 FAX 1-800-345-1325 1 vvwv.hoshizakl.com KM -101 BAH 3/23/15 Item # 13209 KM- I 0 I BAH SELF-CONTAINED CUBER WITH BUILT-IN STORAGt MR DIMENSIONS W x D x H KM -101 BAH • Air-cooled 23'" x 2411' x 39* with 6- Icgs AIR-COOLED Water Temp' F. 50' 70' 90' 70' 115 107 97 80° 109 97 87 a 90' 107 78 UTILITY CONSUMPTION Model Number Ice Production Per Cycle WH per 100 LBS. Pv,wM Water Gal. per CO Me u« Water Gal. FPer Lbs. I Cubes 100 lbs. 100 lbs. %M-101 BAH 2.31 110 1 9.4 23.0 N/A SPECIFICATIONS Model Number Condenser Amperage Min. Circuit Shipping Ampacity Weight 4M-101BAH Air -Cooled 5.2 15A 143 lbs. "KM CUBE DIMENSIONS ��1 vel 1112 'approximate size in inches, image not to scale :LECTRICAL & PLUMBING/KM-101 BAH 115V/60/1 15 amp Max Fuse/HACR Breaker Size Icemaker Water Supply Line: Minimum 1/4" Nominal ID Copper Water Tubing or Equivalent Icemaker Drain Line: Minimum 3/4" Nominal ID Hard Pipe or Equivalent ' OMSF ' 0 © HOSHIZAKI AMERICA, INC. FRONT VIEW PJR TOP VIEW SIDE VIEW OPERATING LIMITS -Ambient Temp Range -Water Temp Range -Water Pressure -Voltage Range 45 - 100'F 45 - 90'F 10 - 1 13psig 104 - 127V BACK VIEW ]fZf CRMR27/48 CRMR27/48 3/13 Item # 13286 Commercial Series Undercounter Refrigerators Hoshizald America, Inc. reserves the right to change specifications without nonce. NSF c@us LisrEo • Stainless steel exterior front, sides and top • Anodized Aluminum interior sides and back with stainless steel interior floor • Stainless steel exterior door with ABS interior liner • Cabinet and doors are insulated with 2" of CFC free, foamed in place polyurethane • Exclusive "stepped" door design to protect door gasket • Spring assisted self-closing doors with stay open feature • Extruded aluminum flush mount door handle • Field reversible doors • Magnetic door gasket is easily removable for cleaning • Enamel coated evaporator coil • Anodized aluminum shelf supports adjustable in '/2" increments • Standard with 4" stem casters (two with brakes) • Three years parts and labor warranty • Five year compressor warranty • 8 ft. cord and plug CRMR27 and CRMR48 are ENERGY STAR qualified Dimensions / Caraacity Model tl One Section CRMR27 Two Section CRMR48 Nominal Storage Capacity (CF) 7.2 ft' 13.66 f' Interior Storage Capacity (CF) (AHAM) 6.22 ft' 11.95 ft' Overall Width x Depth 27" x 30" 48" x 30" Height (including 4" casters) 33.63" 33.63" Door Opening Width x Height 22.6" x 22.9" 19.5"x 22.9" Depth with Door open at 90° 54.5" 51.5" Adjustable Shelves 1 2 Shelf Dimensions W x D 22.0" x 16.0" 21.3" x 16.0" Crated Shipping Weight 1601bs 222 Ibs Crated Height x Width x Depth 36.5" x 31.5" x 34" 36.5" x 52.5' x 34' Electrical / Refrigeration Data Model # One Section CRMR27 Two Section CRMR48 Amperage 2.6 2.6 Energy Consumption (kwh/day) ENERGY STAR .65 1.44 Heat Rejection (BTU/Hr.) @NSF 180 327 Approx. Nominal Compres. BTU/HR(HP) I 1029(1/6HP) 1029(1/6HP) Item # 26 Project: YAYOI Cupertino Qty: 1 *AutoCad available on KCL CRMR Dimensions W x D x H I Section - 27" x 30" x 33.63- 2 Section - 48" x 30" x 33.63"* *with 4" casters Electrical/Refrigeration Voltage 115/60/1 HACR Breaker I & 2 Section - 15.0 Electrical Connection (NEMA) I & 2 Section - 5-15P Voltage Range 104126 Ambient Temp. Range 45'-100 F Control Setpoint Range 20' to52° F *Refrigerant R -134a Warranty Valid in United States, Canada, Puerto Rico, and U.S. Territories. Contact factory for warranty in other countries. • Three Year - Parts & Labor on entire machine. • Five Year - Parts on: Compressor. Options • 2.25" Casters - to meet ADA 6" Casters Additional epoxy shelves • Cylinder locks -01 (factory installed) • ' 1 � fN © HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com ZZZ CRMR27/48 Commercial Series Undercounter Refrigerators ® r r I I 22.75' 33.6: I I I I I — — — — — — — — — — — ®I T 3.63' CRMR27 FRONT 1 48" 30'' SIDE (Cross Section) PLAN VIEW 51.5' i 27' 54.5' I I I I I 43.74' 33.63' I I I I I I I I I ——————————— — — — — — — — — — T 3.63' CRMR48 FRONT Cabinet Construction The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are anodized aluminum with an ABS ceiling and stainless steel Floor. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the shelves are adjustable in %i" increments. Cabinet walls and doors are insulated with 2" of environmentally friendly, CFC free, foamed in place polyurethane. 4" polyolefin, stem casters (two with brakes) are standard. Door Construction Doors are constructed of high grade stainless steel exterior with an ABS interior liner Hoshizaki's exclusive "stepped" design protects the gasket while product is removed from the cabinet. Doors are provided with a one piece, extruded aluminum, flush mount handle. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Snap -in magnetic door gaskets are durable and easily removed for cleaning. Field reversible door hinging is standard. Refrigeration System The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non -electric evaporation system. A capillary tube controls the flow of environmentally friendly R -134A refrigerant through the evaporator. Refrigeration system utilizes an "off cycle" defrost to eliminate any ice on the evaporator coil. I I S volt units are equipped with an eight foot cord and plug (20.0 amps or less). © HOSHIZAKI AMERICA, INC. r� NS� C UL US LISTED 618 Hwy. 74 S., Peachtree City, GA 30269 • TEL 800-438-6087 • FAX 800-345-1325 • www.hoshizaki.com ZZZ NSF C@ US LISTED CRMF27/48 Commercial Series Undercounter Freezers • Stainless steel exterior front, sides and top • Anodized Aluminum interior sides and back with stainless steel interior floor • Stainless steel exterior door with ABS interior liner • Cabinet and doors are insulated with 2" of CFC free, foamed in place polyurethane • Exclusive "stepped" door design to protect door gasket • Spring assisted self-closing doors with stay open feature • Extruded aluminum flush mount door handle • Field reversible doors (without kit) • Magnetic door gasket is easily removable for cleaning • Enamel coated evaporator coil • Automatic defrost • One (1) epoxy coated shelf per section is standard • Anodized aluminum shelf supports adjustable in I/2" increments • Standard with 4" stem casters (two with brakes) • Three years parts and labor warranty • Five year compressor warranty • 8 ft. cord and plug " CRMF27 and CRMF48 are ENERGY STAR qualified Dimensions / Capacity Model # One Section CRMF27 Two Section CRMF48 Nominal Storage Capacity (CF) 7.2 ft' 13.66 ft' Interior Storage Capacity (CF) (AHAM) 6.22 ft' 11.95 ft' Overall Width x Depth 27" x 30" 48" x 30' Height (including 4" casters) 33.63" 33.63" Door Opening Width x Height 22.6" x 22.9" 19.5' x 22.9" Depth with Door open at 90° 54.5' 51.5' Adjustable Shelves 1 2 Shelf Dimensions W x D 22.0" x 16.0" 21.3" x 16.0" Crated Shippinq Weight 160 lbs 238 lbs Crated Height x Width x Depth 36.5" x 31.5' x 34" 36.5' x 52.5" x 34" Electrical / Refrizeration Data Model # One Section CRMF27 Two Section CRMF48 Amperage 3.4 6.0 Energy Consumption (kwh/day) ENERGY STAR 2.66 4.34 Heat Rejection (BTU/Hr.) @NSF 442 820 Approx. Nominal Compres. BTU/HR(HP) I 841(1/5HP) 1527(1/3HP) CRMF27/48 10/14 Item #13287 Hoshizakl Amerlca, Inc. reserves the right to change specifications without notice. Item # 27 Project: YAYOI Cupertino Qty: 1 'AutoCad available on KCL CRMF Dimensions W x D x H Section - 27" x 30" x 33.63"" 2 Section - 48" x 30" x 33.63"* *with 4" casters Electrical/Refrigeration Voltage 115/60/1 HACR Breaker 15.0 Electrical Connection (NEMA) I & 2 Section - 5-15P Voltage Range 104 - 126 Ambient Temp. Range 45% 100T Temperature Range -10'- +10T *Refrigerant R-134A Warranty Valid in United States, Canada, Puerto Rico, and U.S. Territories. Contact factory for warranty in other countries. Three Year - Parts & Labor on entire machine. Five Year - Parts on: Compressor. Options • 2.25" Casters - to meet ADA 6" Casters • Additional epoxy shelves • Cylinder Locks -01 (factory installed) • tM © HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 TEL 800-438-6087 FAX 800-345-1325 www.hoshizaki.com ZZZ CRMF27/48 t,, Commercial Series Undercounter Freezers I ® I I I I 22.75" 33.63" I I I I I I I I I— — — — — — — — — — i—I I T 19 3.63" CRMF27 FRONT 4R" 30" SIDE (Cross Section) PLAN VIEW 51.5' i 27" 54.5" I I I I I I 43.74" 33.63" I I I I I I I I I I– – – – – – – – – – – – – – – – – – – T 3.63" CRMF48 FRONT Cabinet Construction The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are anodized aluminum with a stainless steel floor. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the shelf is adjustable in 1/2" increments. Cabinet walls and doors are insulated with 2" of environmentally friendly. CFC free, foamed in place polyurethane. Perimeter door heater prevents condensation from forming on the face of the cabinet. 4" polyolefin, stem casters (two with brakes) are standard. Door Construction Doors are constructed of high grade stainless steel exterior with an ABS interior liner Hoshizaki's exclusive "stepped" design protects the gasket while product is removed from the cabinet. Doors are provided with a one piece, extruded aluminum, flush mount handle. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Snap -in magnetic door gaskets are durable and easily removed for cleaning. Field reversible door hinging is standard. Refrigeration System The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non -electric evaporation system. A capillary tube controls the flow of environmentally friendly R -134A refrigerant through the evaporator. Unit is provided with an automatic electric defrost to remove any ice on the evaporator coil. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less). © HOSHIZAKI AMERICA, INC. NSE C UL US LISTED 618 Hwy. 74 S., Peachtree City. GA 30269 - TEL 800-438-6087 • FAX 800-34S-1325 • www.hoshizaki.com 00 a 14m&t�-" S7�w6A(rd(g) NATER HEATERS Commercial Line MODEL: D -80 -125 -AS 80 GALLON HEAVY DUTY STORAGE DIRECT SPARK IGNITION DAMPERED D -80 -125 -AS Features • Heavy Gauge Steel Tank - incorporating only three internal flue tubes resulting in fewer critical welds to yield added years of trouble-free service. • Inner Tank Glass -lined - with Dura-GlasTm and fired at 1600° F for optimum protection from the effects of corrosion. • R- 8.3 Non -CFC Foam - insulated to save energy & reduce fuel costs by maximizing heat retention. Four Anode Rods - to ensure maximum tank life. • Full Sized Hand -hole Cleanout - for easy tank inspection and/or removal of sediment deposits. • Electronic Direct -Spark Ignition System - saves fuel by eliminating the need for a standby gas pilot. • Automatic Motorized Flue Damper - reduces tank heat loss during standby periods for lowest operating costs. • Fully Adjustable 24 -Volt Controls - provide temperature settings to 180° F. When installed with a mining valve, the D -80 -125 -AS can deliver 180° F sanitizing and 140° F general purpose hot water simultaneously. • Factory Installed Energy Cut-off System & Pressure/Temperature Relief Valve. • Top 11/2", 2" Rear & 2° Front Water Connections - for universal replace- ments, connection to circulating lines and eased multiple heater or storage tank installations. GSA certified to meet NSF/ANSI 5 Standards. • AMERICAN STANDARD Gas Water Heaters - are certified at 300 PSI test pressure & for 150 PSI working pressure. All tanks are hydrostatically tested at the factory. • Certified with CSA International - in accordance with ANSI 221.10.3 - CSA 4,3 for up to 180° F operation as an automatic storage and/or automatic circulating tank heater & meets ASHRAE 90.1-1999. • Three Year Limited Warranty - on inner glass -lined tank & one year limited warranty on all other component parts. THIS WATER HEATER MEETS THE REQUIREMENTS OF ASHRAE 90.1-1999 AND MEETS OR EXCEEDS THE THERMAL EFFICIENCY AND STANDBY LOSS REQUIREMENTS OF CALIFORNIAAND OTHER STATES RECOGNIZING ASHRAE. Project: YAYOI Cuper Item#: 31 125,000 BTU NAT GA! 125,000 BTU L.P. GA. 01"ER"ElfTOus 4*w?jo S*qdard WATER HEATERS 569 New York Drive, Pomona, California 99766 (800) 900-9063 * (909) 392-0230 - FAX (909) 392-731 e 4 D -80 -125 -AS SPECIFICATIONS AND APPLICATION DATA ELECTRICAL REQUIREMENTS Need 120 Volt 60 Cycle AC Power Draws less than 5 AMPS SPECIFICATIONS FOR PROPANE (LP) GAS MODEL ADD SUFFIX -LP', FOR SCAOMD LOW NOx MODEL ADD PREFIX `N' DIMENSIONS SHOWN IN INCHES TANK BTU REC BTU REC THERM MODEL GALLONS INPUT GPH INPUT GPH EFF NUMBER* CAPACITY NAT 1000 L. P. 1009 o CONN. TO GAS RISE GAS RISE°' FRONT D -80 -125 -AS 80 125,000 121 125,000 121 80% FOR PROPANE (LP) GAS MODEL ADD SUFFIX -LP', FOR SCAOMD LOW NOx MODEL ADD PREFIX `N' DIMENSIONS SHOWN IN INCHES RECOVERY IN GALLONS PER HOUR AT VARIOUS TEMPERATURE RISES MODEL NUMBER GAS TYPE BTU INPUT TEMPERATURE WATER. I.P.S. GAS 11 T&P EXTERIOR V TOP REAR CONNECTIONS I.P,S. T a - DIMENSIONS E PIPE & (TOP, REAR&FRONT) CONN. TO E 135 N SIZE FRONT 93 87 r0 N HGT. TOP HGT. HGT. H s 135 T 110 WATER P l` CONN. TO WATER TO REAR TO REAR G I E N N TOP SPREAD & FRONT & FRONT T Z WATER HOT COLD E N G A B C D E F I G H+1/2571/. 731/4 261/4 671/4 5 11/2 2 70 195/4 551/4 223/4 43/4 3/a RECOVERY IN GALLONS PER HOUR AT VARIOUS TEMPERATURE RISES MODEL NUMBER GAS TYPE BTU INPUT TEMPERATURE RISE 40° 50° 60° 709 80° 90° 100° 110° 1200 1300 140* D NAT 125,000 303 242 202 173 152 135 121 110 101 93 87 -80 -125 -AS LP 125,000 303 242 202 173 152 135 121 110 101 93 87 MAXIMUM HOT WATER DELIVERABILITY AT VARIOUS TIN/IE PERIODS STORAGE ONE HOUR GPM CAPACITY RECOVERY 1ST HOUR 2 HOURS 3 HOURS REC. U.S. GALLONS 100° RISE 100° RISE 80 121 177 298 419 2 Note: Recovery rate indicated on heater rating plate is based on 75% (76%) thermal efficiency according to CSA (ANSI, Z.21.10.3) Manufacturer reserves the nght to make product changes andlor improvements with or without notice SAMPLE SPECIFICATION rCommercial gas water heater shall be AMERICAN STANDARD model having a storagecapacity of gallons, operate on Gas, with a BTU input of anda recovery rate of gallons per hour at 100° F temperature rise. Water heater tank interior shall beglass lined with Dura-GlasT , furnished with four anode rods and insulation shall be non -CFC foam of R-8.3. Water heater shall be CSA certified. AAW4'" <S*,vdartt' WATER HEATERS 51 1 1(800) 900-9063 • (909) 392-0230 • Fax (909) 392-7302 HAND SINKS DROP-IN HAND SINKS MODEL: HS -1515 PROJECT: YAYOI ITEM #. 38 QTY: 1 PRODUCT IMAGES STANDARD FEATURES HS -1317 HS -1515 HS -2017 ASF ■ Fabrication 20 gauge stainless steel. All seams tig welded and polished ■ Bowl High quality deep drawn ■ Wall Mounting Bracket Offset design for added strength ■ Faucet HS -1317 & HS -1515: 4" on center faucet with 3 1/2" gooseneck spout supplied (optional upgrade available) HS -2017: 4" on center faucet with 8 1/2" gooseneck spout supplied (optional upgrade available) ■ Drain HS -1317 & HS -2017: Stainless Steel 1 '/2" drain HS -1515: Stainless Steel 2" drain ■ Mounting Studs with fasteners included ■ Plumbing '/2" IPS hot and cold water. 1 1/2" IPS drain outlet ■ Low Lead Compliance Low Lead Compliant faucet options are available to meet California AB -1953 and Vermont S152 standards OPTIONAL ACCESSORIES ■ H-100 Chrome Plated 1 '/2" IPS P -Trap ■ H-103 Wrist Handle Kit ■ H-109 Upgrade: Low Lead Royal Series Faucet ■ H-200 Upgrade: Low Lead Commercial Series Faucet APPROVED BY: CERTIFICATIONS: Due to our commitment to continued product improvement, specifications are subject to change vubout notice. Printed in the USA Krowne Metal Corporation Rev. 10/2013 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 No. 2.3 sales@krowne.com 9 www.krowne.com 9 www.facebook.com/KrowneMetal 9 www.twitter.com/KrowneMetal MODEL: HS -1317 HS -1515 HS -2017 PROJECT: 4" O.C. r. H+ +C 17" 12" G _..___...,..L 13" TOP VIEW 3" a� (702mm) d32im (25.mrn) s (38t «uri) TOP VIEW 4" � aC. H, # C 17 r I2 -3t4- 0 20-1M' TOP VIEW 7-7 . HAND SINKS DROP—IN HAND SINKS ITEM #: SIDE VIEW 7 ;r SIDE VIEW SIDE VIEW APPROVED BY: QTY: CERTIFICATIONS: Due to our commitment to continued product improvement, specifications are subject to change without notice. Printed in the USA Krowne Metal Corporation Rev. 10/2013 100 Haul Rd. Wayne, NJ 07470 - Toll Free: (800) 631-0442 - Fax: (973) 872-1129 No. 2.3 salesQkrowne.com - www.krowne.com 9 www.facebook.com/KrowneMetal - www.twifter.com/Krownel\4etal