Loading...
15110078CITY OF -CUPERTINO BUILDING PERMIT BUILDING ADDRESS: 20670 HOMESTEAD RD OWNER'S NAME: SOBRATO INTERESTS 1 ETAL OWNER'S PHONE: 4084460700 LICENSED CONTRACTOR'S DECLARATION License Clads �I r -c Lic. # Contractor Date > > d- I S I hereby affirm that I a licensed unor the provisions of Chapter 9 (commencing with;Sectlon 7000) of Division 3 of the Business & Professions Code and that my license is jn full force and effect. I hereby affirm under penalty of perjury one of the following two declarations: I have and will maintain a certificate of consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the a erformance of the work for which this permit is issued. have and will maintain Worker's Compensation Insurance, as provided for by Section 37.00 ofLLaabbor Code, for the performance of the work for which this permit is issued APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses .which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -p source regulations per the Cupertino Municipal Code, Section 9. z nature ' Date t ?� ❑ OWNER -BUILDER DECLARATION I hereby affirm that I, am exempt from the Contractor's License Law for one of the following two. reasons:; I, as owner of the'property, or my. employees with wages as their sole compensation, will do the work, and the structure isnot intended or offered for sale (Sec.7044, Business & Professions Code) I, as owner of the, property, am exclusively contracting with licensed contractors to construct the project (Sec.7044, Business & Professions Code). I hereby affirm under penalty of perjury one of the following three declarations: I' I have and will ;maintain a Certificate of Consent to self -insure for Worker's Compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain Worker's Compensation Insurance, as provided for by Section 3700 ;of the Labor Code,' for the performance of the work for which this permit is issued. , I certify' that'in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Worker's Compensation laws iof California. If, after making this certificate of exemption, I become subject to the Worker's Compensation provisions of the Labor Code, I must forthwith comply with such provisions or this permit shall be deemed revoked. APPLICANT CERTIFICATION I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction,'and hereby authorize representatives of this city to enter upon the above mentioned property for inspection purposes. (We) agree to save indemnify and keep harmless the City of Cupertino against liabilities, judgments, costs, and expenses which may accrue against said City in consequence of the granting of this permit. Additionally, the applicant understands and will comply with all non -point source regulations per the Cupertino Municipal Code, Section 9.18. Signature Date CONTRACTOR: YADA SIGNS PERMIT NO: 15110078 133 , vii AM4ME—=, DATE ISSUED: 11/12/2015 t I CMLAO-5 PHONE NO: (510) 828-9354 JOB DESCRIPTION: RESIDENTIAL E] COMMERCIAL INSTALL (N) ELECTRIC WALL SIGN ON FRONT EXTERIOR WITH I BRANCH CIRCUIT "FISH'S WILD" Sq. Ft Floor Area: Valuation: $2400 I APN Number: ' � % (p Q (a(P, U 670 I Occupancy Type: I PERMIT EXPIRES IF WORK IS NOT STARTED WITHIN 180 DAYS OF PERMIT ISSUANCE OR 180 YS FROM LAST CALLED INSPE TI N.' /j Issued by: t.�% t�l�tt.�il G Date: / RE -ROOFS: All roofs shall be inspected prior to any roofing material being installed. If a roof is installed without first obtaining an inspection, I agree to remove all new materials for inspection. Signature of Applicant: Date: ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER HAZARDOUS MATERIALS DISCLOSURE I have read the hazardous materials requirements under Chapter 6.95 of the California Health & Safety Code, Sections 25505, 25533, and 25534. I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the Health & Safety Code, Section 25532(a) should I store or handle hazardous material. Additionally, should I use equipment or devices which. emit hazardous air contaminants as defined by the Bay Area Air Quality Management District I will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the lkgjth & Safety Code, Secti 25505, 25533, and 25534. - Ow or authorized agent: Date: I �Z CONSTRUCTION LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of work's for which this permit is issued (Sec. 3097, Civ C.) Lender's Name Lender's Address ARCHITECT'S DECLARATION I understand my plans shall be used as public records. Licensed Professional SIGN PERMIT APPLICATION 1511 00% - COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION 10300 TORRE AVENUE • CUPERTINO, CA 95014-3255 (408) 777-3228 • FAX (408) 777-3333 • build! na(crDcupertino.org PROJECT ADDRESS�� *mw APN9' OWNER NAME (_ `c 5 PHONE G- y-IaO O o � I E-MAIL STREET ADDRESS , STATE, Z�j� FAX ®� 0aCITY, a&(2 q CONTACT NAME PHONE a E-MAIL ( ss STREET ADDRESSA CITY, STATE, ZIP t FAX y n I ❑ OWNER ❑ OWNER -BUILDER ❑ OWNER AGENT CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT CONTRACTOR NAME LICENSE NUMBER LICENSE TYPE^ ' BUS. LIC # COMPANY NAME E-MAIL FAX \ i STREET ADDRESSw +��a n d CITY, STATE, ZIP ,!:L� a.,( PHONE to r �1 / ARCHITECT/ENGINEER NAME LICENSE NUMBER BUS. LIC 9 COMPANY NAME E-MAIL FAX STREET ADDRESS CITY, STATE, ZIP PHONE DESCRIPTION OF WORK USE OF ❑ SFD or Duplex ❑ Multi -Family ILLUMINATED SIGN TYPE NO. OF SIGN AREA VALUATION STRUCTURE: Commercial (YIN) (`C'OD'E) SIGNS (SQ. FT.) (S) SIGN TYPE CODES: �V l Od, iii a B - BANNER SIGN M - MONUMENT (GROUND) SIGN BL - BLADE SIGN P - PROJECTING SIGN D - DEVELOPMENT ID SIGN SP - SPECIAL EVENT BANNER DI - DIRECTIONAL SIGN TEMPORARY TEMPORARY E - ELECTRONIC / Wim- WALL SIGN READERBOARD WI - WINDOW SIGN REC) IVEDE (" { TOTraL VALUATION: By my signature below, I certify to each of the following: I am the property owner or au orized agent to act on the property owner's behalf. I have read this ided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local application and the information 1h�iing ordinances and state laws relating to b c struct' -authorize representatives of Cupertino to enter the above -identified property for inspection purposes. r Signature of Applicant/Agent:CA Date: i III, SUPPLEMENTAL INFORMATION REQUIRED Site Plan {t _P,LANCHECICTYPE ..., ROIJT17�GSLLP` ; ;:. Elevations ❑ cEXPRESSk `29 BUIIDINGPLAN REVIEW` "` Sign Details - including UL listing(s) applicable .=-tr i -Pte. sT�NDnRn �i v� j5 3 QPLAFINILVGPLANREVI&W TM _ g 3 �h r� ��� —Structural Calculations (if applicable) ❑ " x � r ❑ OTHER -�,� �� � � Copy of Planning Approval Letter or Meeting with Planning prior to {a�-"iARGE � �, ❑'tVL4JOR`4 $°� s[" ... 3 = 5 — submittal of Building Permit application. F T{tea k ti r� x r SignApp_2011.doc revised 03/16/11 CITY OF CUPERTINO 15 11 FFF ESTIMATOR - ]BUILDING DIVISION imADDRESS 20670 Homestead Rd --7DATE: 11/12/2015 REVIEWED BY: PAUL Plan Oleck.Fee: APN: 32610 066 BP#: *VALUATION: 1$2,400 *PERMIT TYPE: Building Permit 1 hrs PRIMARY Sign USE: -7 Plumb, /,-4&ec,,h-/Ehx PENTAMATION 1 CEAP5 1PERMIT TYPE: A WORK Install (N) electric wall sign on front exterior with I branch circuit "Fish's Wild" SCOPE Supol.'Insp. Feer Reg. 0 OTO -14'ech. Pk Pluwb. Phwir (7heck # Branch Circuits 1 $48.00 1---ee: Phtwb. Pt-rriif IESIGNElec. Permit Fee: IEPEPJ VT Insp. [ 0--0] $48.00 0�he;-A,feelh. hqf). Other Phtynb !nsp� Other Elec. -kfe—h. Ins jnv,.hHp. F'ee: p" Ft. VOTE: This estimate does not include fees due to other Departments (i.e. Planning, Public Works, Fire, Sanitary Sewer District, School District, etc.). These fees are based on the preliminary information available and are only an estimate Contact tneueptjor aaan -i FEE ITEMS (Fee .Resolution .1.1-053 tff 711113,E FEE QTY/FEE MISC ITEMS Plan Oleck.Fee: Suppl. PC Fee: (D Reg. 0 OT 10.0 1 hrs $0.00 Plumb, /,-4&ec,,h-/Ehx Permit Fee: $286.00 Supol.'Insp. Feer Reg. 0 OTO F - 0 hrs $0.00 PW'Unit Fee - $48.00 PNM Permit Fee: $48.00 Adir. hfisin-Ifive fee: Work Without Permit? 0 Yes (a No $0.00 Sign Master Plan: 0 Yes (j) No $0.00 Travel Documentation Fee: I TRA VDOC $48.00 Strong Motion Fee: IBSEISMICO $0.67 Select an Administrative Item Bldg Stds Commission Fee: IBCBSC $1.00 ... .... SUBTOTALS $431.67 $0.00 O,TAL,, -FEE. $431.67] Revised: 10/01/2015 STATE OF CALIFORNIA � k CERTIFICATE OF COMPLIANCE, SIGN LIGHTING w CEC-SLTG-1C (Revised 10110) CALIFORNIA ENERGY COMMISSION , Certificate of Compliance (Sign Lighting) (Page 1 of 4) SLTG-1C Project Name: _ �� v Date: Project Address: / Title 24, 1 rtd of h C 1' o ode o egulations. • The desi f o erti cat f C, ld ce re consi��l�i t t i� to � rbthti�d Yoi ddocument es r r s . ,}ica a e c ance rm or heets alculations laps nd s fic to the this design on the other pp`P , p � Revlewe��y: ���� Location of Sign ❑ Outdoor Signs ❑ Indoor Signs Name: � Phase of Sign Construction Ylew Signs ❑ Sign Alterations �/ 4 Type of Lighting Control El New Lighting Controls ❑ Replaced Lighting Controls -Not Installing Lighting Controls This Certificate of Compliance includes the following components (check all that apply) Address: ,� � ❑ Mandatory Measures (Lighting Controls) ❑ Maximum Allowed Lighting Power Specific Lighting Sources 1. Certificate of Compliance Declaration Statement (this maybe a Clo, C45 or other eligible person) • I certify under penalty of perjury, under the laws of the State of California, aticepjcp;gt orm is true and correct. Building Department • I am eligible under Division 3 of the California Business and Professions e pt responsibility for the lighting design. • This Certificate of Compliance identifies the lighting features and perform caMi Jre4tQredW& compliance with Title 24, 1 rtd of h C 1' o ode o egulations. • The desi f o erti cat f C, ld ce re consi��l�i t t i� to � rbthti�d Yoi ddocument es r r s . ,}ica a e c ance rm or heets alculations laps nd s fic to the this design on the other pp`P , p � Revlewe��y: ���� enforcement agency for approval with this building permit appy ation. Name: � Signature i Company: U Phone / Address: ,� � License number (may be contractor's lie #) Y � City/State/Zip: J/ LWr� 114 Date _ 2. Installation Certificate (to be signed by responsible person after installation) Installation Declaration statement • I certify under penalty of perjury, under the laws of the State of California, the information provided on this form is true and correct. • I am eligible under Division 3 of the Business and Professions Code to accept responsibility for construction, or an authorized representative of the person responsible for construction. • I certify that the installed features, materials, components, or manufactured devices identified on this certificate conforms to all applicable codes and regulations, and the installation is consistent with the plans and specifications approved by the enforcement agency. • I certify that the requirements detailed on this Certificate of Compliance have been met. • I will ensure that a completed, signed copy of this Installation Certificate shall be posted, or made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a signed copy of this Installation Certificate is required to be included with the documentation the builder provides to the building owner at occu-Dancv. Company Name: Responsible Person's Name: I Responsible Person's Signature: License number (may be contractor's lie #) Date Signed: Position With Company: 2008 N077residential Conzplialzce Forms October 2010 STATE OF CALIFORNIA CERTIFICATE OF COMPLIANCE, SIGN LIGHTING CEC-SLTG-1C (Revised 10/10)CALIFORNIA ENERGY COMMISSION'° Certificate of Compliance (Sign Lighting) (Page 2 of 4) SLTG-1C Project Name: Date: If there are construction documents, indicate where on the building plans the 3. Mandatory Sign Lighting Controls NOTES: 1. The same responsible person may install both the sign lighting power and the sign lighting controls, or a different responsible person may install the sign lighting controls than the responsible person installing the sign lighting power. 2. The Mandatory Measures (sign lighting controls) are required for compliance with the sign lighting Standards. If the person responsible for installing the signlighting power is not also responsible for the sign lighting controls, thenn the owner of the sign, general contractor, or architect shall be responsible to have the sign lighting controls installed. 3. If more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible; alternatively, the person with chief responsibility for construction shall prepare and sign the Certiftcate of Connpliazce Declamation Statement or the entire construction. 3a. Statements of Responsibility: Any person signing the Certificate of Compliance Declaration Statement on page 1 of 4 on this SLTG-1C shall complete Part 3a. Check Yes or No for all of the following statements: 1 I have responsibility for installing the sign lighting controls N Yes, complete parts 3a and 3b of this form ❑ No, complete part 3a of this form 2 There are no existing sign lighting controls and I will be installing compliant sign lighting controls 10 Yes ❑ No 3 .There are no existing sign lighting controls and someone else will be responsible to install compliant sign lighting controls Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during ❑ Yes No NA There are existing sign lighting controls that do not comply with the applicable provision of § 119 and § 133 and I will be 4 installing compliant sign lighting controls ❑ Yes No §133(a)3. All outdoor signs are controlled with a dimmer that provides the ability to automatically reduce There are existing sign lighting controls that do not comply with the applicable provision of §119 and § 133 and someone else 5 will be responsible to install compliant sign lighting controls ❑ Yes 4 No 3b. Mandatory Sign Lighting Controls If the person signing the Certificate of Compliance Declaration Statement on page 1 of 4 of this SLTG-1C is responsible for complying with the sign lighting control requirements, that person shall answer all of the following questions: If there are construction documents, indicate where on the building plans the mandatory measures (sign lighting control) note block can be located: 1 §133(a)1. All indoor sign lighting is controlled with an automatic time switch control that complies with the Y N NA applicable requirements of § 119. ❑ ❑ t §133(a)1 and 2. All outdoor sign lighting is controlled with an automatic time switch control plus a photo Y N NA control, or an outdoor astronomical time switch, that comply with the applicable requirements of § 119. ❑ ❑ 2 Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during Y NA daylight hours. ❑ §133(a)3. All outdoor signs are controlled with a dimmer that provides the ability to automatically reduce Y I N NA sign power by a minimum of 65 percent during nighttime hours. ❑ ❑ Exception 1 to§133(a)3. Si ns illuminated for less than one hour per da during daylight hours. P� g P Y g Y K NA 1 ❑ 3 Exception 2 to §133(a)3. Outdoor signs in tunnels or large covered areas that require illumination during Y NA daylight hours. ❑ Exception 3 to §133(a)3. Only metal halide, high pressure sodium, cold cathode, or neon lamps used for Y N illuminating signs or parts of signs. ❑ §133(a)4. An Electronic Message Center (EMC) having a new connected lighting power load greater than Y N N/A 15 kW has a control installed capable of reducing the lighting power by a minimum of 30 percent when ❑ ❑ `,�, 4 receiving a demand response signal that is sent out by the local utility. Exception to §133(a)4. EMC required by a health or life safety statue, ordinance, or regulation, including Y NA but not limited to exit signs and traffic signs. ❑ Field Inspector Notes: 2008 Nonresidential Compliance Forms October 2010 STATE OF CALIFORNIA CERTIFICATE OF COMPLIANCE, SIGN LIGHTING CEC-SLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION .m Certificate of Compliance (Sign Lighting) (Page 3 of 4) SLTG-IC Project Name: Date: 4. Maximum Allowed LichtinLy Power Method of Compliance Certificate of Compliance and Field Inspection Energy Checklist Complete this part if there are signs using the maximum allowed lighting power method of compliance. (Complete part 5 of this Certificate of Compliance if there are signs using the Specific lighting sources method of corn liance) A B C D E F G H I Q Allowed Watts Design Complies? w Watts Y/ N h x O? iso\ 4i b rA Inspector U z o Cd VI eck x. Chthat � w 3 x CZ 61) _03 >, z o o� Description A 4 S f fj 6 4S' yi ❑ y ❑ 1.. } ' r ne J A Symbol or code used on the plans (when plans are required) and other documents. S A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents. OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed, ENERGY VERIFIED label, confirming that the sign complies with the Section 148 of the California 2008 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National C Standards Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label, columns `D' through `I' are not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An ENERGY VERIFIED label is not needed for compliance. D The sign area in square feet. E List "I" if the sign is internally illuminated. List "E" if the sign is externally illuminated. F Allowed watts per square foot. Enter 12 if the sign is listed as "I" in column E. Enter 2.3 if sign is listed as `B" in column E. G Multiply the square footage in column D times the allowed Lighting Power Density (LPD = watts) in column F. H Show the total installed watts in the sign, as determined according to the applicable provisions of §130(d or e). I Enter Y if the number in column His less than or equal to the number in columm G. Otherwise, the sign does not comply. J This page doubles as a field inspection checklist. Field Inspector Notes: 2008 Nonresidential Compliance Forms October 2010 STATE OF CALIFORNIA y k.dk y CERTIFICATE OF COMPLIANCE, SIGN LIGHTING CEC-SLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION ' Certificate of Compliance (Sign Lighting) (Page 4 of 4) SLTG-IC Project Name: .i L_ � i � � Date: f � � • J 5. Specific Lighting Source Method of Compliance Certificate of Compliance and Field Inspection Energy Checklist Complete this part if there are signs using the Specific lighting source method of compliance. (Complete part 4 of this Certificate of Compliance if there are si s using the maximum allowed lighting power method of compliance) A B C D ...................... .... _ xtr E OPTIONAL ENERGY Specific light source used for Field r° Inspector ' Symbol VERIFIED compliance Check that or Description label Shall include only lighting sC 'Slgn }r'. Code (see instructions below) technologies listed below Complies List all that apply z (I i I; ❑ I � S ❑ /� Yz ❑ D F ❑ x �r =1 � • ' k ;:F ❑ ❑ A Symbol or code used on the plans (when plans are required) and other documents. B A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents C OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed ENERGY VERIFIED label, confirming that this sign complies with the Section 148 of the California 2008 Title 24, Part 6 Standards, using the Specific Lighting Source Method of Compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label, column `D' is not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An ENERGY VERIFIED label is not needed for compliance. Specific Light Source Compliance Method. The sign(s) identified above use only the following lighting technologies: List all applicable numbers (1 through 10) that apply in column D above for each row. 1 High pressure sodium lamps 2 Pulse start or ceramic metal halide lamps served by a ballast with > 88% efficient 3 Pulse start metal halide lamps that are < 320 watts, are not 250 watt or 175 watt lamps, and are served by a ballast with > 80% efficient 4 Neon or cold cathode lamps with transformer or power supply efficiency > 75% with rated output current < 50 mA S Neon or cold cathode lamps with transformer or power supply efficiency >68% with rated output current > 50 mA D 6 Fluorescent lamps with a minimum color rendering index (CRI) of 80 (Note: when using electronic ballasts for compliance, lamps with a CRI < 80 may be used) 7 Light emitting diodes (LEDs) with a power supply with > 80% efficient Single voltage LED external power supplies designed to convert 120 volt AC input into lower voltage DC or AC 8 output, having a nameplate output power less than or equal to 250 watts, and certified to the Energy Commission as complying with the applicable requirements of the Appliance Efficiency Regulations (Title 20) 9 Compact fluorescent lamps that do not contain a medium screw base sockets (E24/E26) 10 Electronic ballasts with a fundamental output frequency > 20 kHz E This page doubles as a field inspection checklist. Field Inspector Notes: 2008 Nonresidential Conzplia»ce Formas October 2010 NE"W IMAGEADVERTISING INC. PERMIT ILLUSTRATION N fV OA 6, STOREFRONT SIGNAGE SJill WIL1011 : O O O _. i 1 � � p Ln -----------------------� -----2�_1"(25'7 ------------------------------------- T-6"_00") 9'-9" (117") TOTAL SQUARE FOOTAGE OF FRONT SIGNAGE: 20.31 sq. ft. FISHJ,S WILD TOTAL FOOT-LAMBERT OF LUMINATION: 92.4 LED Illuminated Channel Letter Front Lit wl Halo Reflection FACE : 3/16" THK. GREEN AND RED ACRYLIC, NO TRIM CAP. RETURN: 0.062 ALUM. PAINTED D. BRONZE LEDs: WHITE LEDs LED III 0A Ch 11 F #I;# C)Fl=lr.F CC)PV.., � umina a anne ogo non I FACE 3/16" THK. WHITE ACRYLIC w/ RED VINYL ON 1st SURFACE .50-Wh Acrylic P RETURN: 0.062 ALUM. PAINTED D. BRONZE Thru LEDs: WHITE LEDs Versilok Z -Trak to LED Illuminated Push Thru Graphic wl Front Lit and Halo Reflection LOGO: PUSH THRU CHANNEL LOGO FACE: 1/2" ACRYLIC w/ VINYL DIGITAL PRINT (FISH) ON 1 st SURFACE GREEN, RED w/ YELLOW OUTLINE VINYL ON 1st SURFACE LEDs: WHITE LEDs c it 00 STORE FRONT (PAD S - East Elevation CONFIG) 12'-0" (144") 29'-0" (348") NEw Image g/ 1234 Winton Ave., Hayward, CA 94545 Phone: (510) 856-1728 newimagead20l5@gmail.com LED Illuminated Push Thru Graphic wl Front Lit and Halo Reflection ' A r ' version: Company: Fish's Wild Location: 20670 Homestead Rd, Cupertino, CA Drawn By: Holland Wong Phone: 415-608-2280 File: Client Approval: E -Mail: t.huang168@yahoo.com Cross Section Detall Approval Date: G PRIMARY ELECTRICAL SOURCE H LISTED DISCONNECT SWITCH I �H J K SPECIFICATIONS: E cO---~ F 0 G D J H e a 20 AMPI120 VOLT CIRCUIT REOUIREC, F s LO NG SPEAKER E e i I u o G ELECTRICAL PRWARY, SUPPLIED BY 20 AMP/120 VOLT CIRCUIT REQUIRED. PRIMARY CONNECTING TO LOCKING BREAKER back of Aluminu Face ROUTED OUT OF!125 ALUM. WHITE 112' ACRYLIC PUSHED THRU DIGITAL PRINTS VINYL FISH ON FIRST SURFACE COMMUNITY DEVELOPMEN i I E_PARTN1ENT BUILDING DIVISION - CUPERTINO APPROVED This set of plans and specifications %1'1ST be kept at the job site during Construction. It is unlLi,,%ful to make an/ changes or alterations on san-le, or to deviate therefrom, witholut approval from the E3u?!ding Official, The Stamping cf tn,s pian and specilcat,o^.s SHALL NOT 'Ce held t,) pern':lt or to be an ap p rova' of the violas on of any prods_-�,,, of any City Ordinance or State LLi+N. BY DATE PERMIT # A .040' ALUMINUM SIDE RETURNS 1/4° DIA. 4' EXTERIOR SCREW WITH 1/2" DIA. STAND OFF B 3 - 4 PER LETTER MIN. 2-1/2' IN TO MASONRY C PUSH THROUGHI/2' THICK ACRYLIC WITH VINYL ON FIRST SURFACE D LED ILLUMINATION STRIP E .060' ALUMINUM CABINET FACE F LOW VOLT LED POWER SUPPLY (j PRIMARY ELECTRICAL SOURCE I -I LISTED DISCONNECT SWITCH I WEEP HOLES (2 PER ELEMENT) J TRANSFORMER HOUSING This design and drawing is the property of New Image ` Advert PUSH THRU CHANNEL LOGO_ R `" �:.`• Address Phone Fax Signature Date Printed Name p7..E F' ! C _ K D BY D I 12 � PLA ING DEPT CUPERTINO Customer: Tommy Huang Proof Date: version: Company: Fish's Wild Location: 20670 Homestead Rd, Cupertino, CA Drawn By: Holland Wong Phone: 415-608-2280 File: Client Approval: E -Mail: t.huang168@yahoo.com Project #: Approval Date: A 3° 1" LED Illuminated Channel Letter Front Lit w1 Halo Reflection Cross Section Detall 114' DIA 3' EXTERIOR SCREW WITH 12' DIA. STAND OFF 3 -4 PER LETTER C SPECIFICATIONS: B LED ILLUMINATION STRIP E TRANSFORMER HOUSING F LOW VOLT LED POWER SUPPLY G PRIMARY ELECTRICAL SOURCE H LISTED DISCONNECT SWITCH I �H J K E F G ELECTRIULPRINARY SUPPLIEDBY 20 AMPI120 VOLT CIRCUIT REOUIREC, PRIMARYCONNECTWGTO LO NG SPEAKER A ------------------------------------ .040` ALUMINUM SIDE RETURNS E3 114' DIA 3' EXTERIOR SCREW WITH 12' DIA. STAND OFF 3 -4 PER LETTER C 3116' ACRYLIC LETTER FACE D LED ILLUMINATION STRIP E TRANSFORMER HOUSING F LOW VOLT LED POWER SUPPLY G PRIMARY ELECTRICAL SOURCE H LISTED DISCONNECT SWITCH I WEEP HOLES (2 PER ELEMENT) J K Scale : nts © FRONT LIT AND HALO CHANNEL LETTER CUPERTINO r3uilding Department w NOV 12 2015 `S1�N1UtATION 1\ VIEWED FOR CODE COMPLIANCE Reviewed By. Ta4v 1uaw Homestead Rd �:..,,.:. t� ,,:. Rc rrenco Rork � all AIh1 20670 Homestead Rd, Cupertino, CA (also see shopping center floor plan on page 2) ising Inc. It is not to be shown, used, or reproduced to anyone outside of your organization without the consent of New Image Advertising Inc. Colors depicted on this drawing are graphic representations and may vary between print outs, emails, and printed materials Please consult us for actual colors used in this job. PAGE 1 of 2 NEW IMAGE ADVERTISING INC. SITE PLAN —ILI L J I\ 1L Ifs= I -.I ' III _ I TT�� ST1-G, — i EXISTING RETAIL + 4L O I 20S 80 HOMESTEAD 20590 HOMESTEAD NEW MAJOR -I NEW MAJOR -2 1p 26,169 SF. 28,891 SF. CIO 138' • 0' 73' - 7• 73' 7" This design and drawing is the property of New Image Advertising Inc. It is not to be shown, used, or reproduced to anyone outside of your organization without the consent of New Image Advertising Inc. Colors depicted on this drawing are graphic representations and may vary aw Ifs EXISTING RETAIL ,aro 20572 HOMESTEAD PREVIOUSLY C APPROVED PAD 1 ■ 18,203 SF. I ■ -J!n i ii c-% SAFEWAY 20620 HOMESTEAD NEW MAJOR -3 54,984 SF. 277'- 0" T T I I I I I I I I I I 1 1 >r CHAS 4� 4� 0578 HOMESTEAD NEW PAD _7 MUM —I FJD.G UP OFQFTTEII SIDEWAAX----� �J PSE NO cu Phone: 415-608-2280 - Client Approval: Or ANY OBSTRUCTION EXCEEDING 20640 HOMESTEAD 20650 HOMESTEAD I nt p rtment EXISTING MAJOR -4 EXISTING MAJOR -S 110S) FOR EURI HER RES I RIC 110%S , 21,066 SF. 25,094 SF. O 20660 HOMESTEA 1[^' l /V EXISTING SHOPS 1 1 106'-4' 144'-0' 5,79@5SF6. E D V E OMPLIANCE � I _,_ .J I I I I I I I I I I 1 1 >r CHAS 4� 4� 0578 HOMESTEAD NEW PAD _7 MUM —I FJD.G UP OFQFTTEII SIDEWAAX----� VNIM Company: Fish's Wild s, &ICr r Phone: 415-608-2280 AREAS BE HIND S DEWALK SHALL DRIM LY iNS) Client Approval: Or ANY OBSTRUCTION EXCEEDING Project #: BOVE SIDEWALK ELEVATION (I.e. USHES) E OETAII 7-7 (CONTROLLED INTER - 110S) FOR EURI HER RES I RIC 110%S New Ima E l� 9 1234 Winton Ave., Hayward, CA 94545 Phone: (510) 856-1728 newimagead20l5@gmail.com — STEA�O t-1 1 NORTH Customer: Tommy Huang Proof Date: Version: Company: Fish's Wild Location: 20670 Homestead Rd, Cupertino, CA Drawn By: Holland Wong Phone: 415-608-2280 File: Client Approval: E -Mail: t.huang168@yahoo.com Project #: Approval Date: ■ 20672 >20676 ■ HMOMESTEAD :)gSTING PAD 11116,116 SF. • A I I n.m I nw ,�• 20660 HOMESTEAD I 6,859 SF. it rri I ■ e IF 6 SIGN LOCATION between print outs, emails, and printed materials. Please consult us for actual colors used in this job. 2of2